Mircomeno with a classic and transfer a voice memo for a windows to a Mac

Hello,
I have a two tier question.
1. I bought a Micromemo recorder by XtremeMac a couple of years ago and it worked great with my 5th generation iPod. I recently got a Classic iPod (6th generation) and it is not syncing up. Is the Micromemo compatible with Classic? Is there any way to make it compatible?
2. My Micromemo did work on a Nano iPod 2nd that is formated to Windows. How can I transfer that Voice Memo on to my Mac?

It really denpends on the os running in the vm and what the permissions are set to on those shares.
I run a few vms on both a mac at home and windows at work and all other computers in my home or at work can connect to the vms without any problems. Even multiple computer at the same time.
It also depends on how you have set the vm up for networking. If you are setting it up as nat, instead of bridged, that can also cause problems access it from multiple system. With nat the vm is on its own network branch.

Similar Messages

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!

[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

Working with AVCHD: Log and Transfer FAQs

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Working with AVCHD: Log and Transfer FAQs
Log and Transfer was introduced to the product chain in Final Cut Express 4, and is the program's process for ingesting files in the AVCHD format utilizing MPEG-4 AVC/H.264 video coding and either Dolby AC-3 or uncompressed linear PCM audio coding. The most frequently observed problems relating to the Log and Transfer process are generally quite easily addressed.
What should I know before attempting to ingest my footage?
The following facts regarding the Log and Transfer process were adapted from the [Apple Knowledge Base article|http://support.apple.com/kb/TA24840?viewlocale=en_US] on transferring AVCHD in Final Cut Pro 6.0.1 but still hold true for the current version of FCE:
AVCHD support is available only on Intel-based Macintosh computers.
AVCHD camcorders typically connect to computers via USB 2.0, not FireWire.
DVD-based AVCHD camcorders are not supported in Mac OS X 10.4 or earlier.
Standard definition video recorded with AVCHD camcorders cannot be accessed in the Log and Transfer window. SD and HD clips should not be mixed on the same HDD.
Preview of AVCHD video in the Log and Transfer window is limited to 1x forward playback. Scrubbing the playhead does not update the video in the Preview area until you stop scrubbing.
When you choose to transfer AVCHD audio in the Logging area, audio is automatically mixed down to stereo.
AVCHD footage is not ingested natively but is transcoded to the Apple Intermediate Codec.
Apple Intermediate Codec files are significantly larger than the original AVCHD files. FCE does not estimate the size of a transcoded AVCHD file before ingesting, so it is possible to exceed the available space on your capture disk during transfer. Before ingesting, keep in mind that the disk space required is about ten times greater than the size of the native AVCHD file.
Which specific formats can be ingested by Log and Transfer?
Only AVCHD footage can be ingested through the Log and Transfer process. Other formats and variants such as AVCHD Lite are not supported. All video should be recorded in a frame size of either 1440x1080 or 1920x1080 and a frame rate of 25 or 29.97 frames per second. Audio recorded on AVCHD camcorders is generally at a rate of 48kHz. If your camera shoots in a format that does not comply with one of these setups then it is most likely not supported by the application and is not guaranteed to work correctly.
Which Easy Setup preset should I select before ingesting my footage?
It is extremely important to select the preset that matches your media before you attempt to ingest via Log and Transfer. There is only one Easy Setup preset that matches the frame size and rate of your footage. If you intend to ingest AVCHD clips through Log and Transfer you will first need to select one of the following presets:
AVCHD-Apple Intermediate Codec 1440x1080i50
AVCHD-Apple Intermediate Codec 1440x1080i60
AVCHD-Apple Intermediate Codec 1920x1080i50
AVCHD-Apple Intermediate Codec 1920x1080i60
If these four options do not appear under your Easy Setup list then you probably need to run Software Update and update to FCE 4.0.1. DO NOT cycle through the available presets until you find one that works - there is only one preset that matches your media and it should be evident which one to choose by the way it is named. Select the AVCHD preset that mentions your frame size and frame rate (i50 presets support both 50i and 25p frame rates; similarly, i60 presets support both 60i and 29.97p frame rates). If you do cycle through many options in the hope of selecting the correct one through guess-and-check you will probably have corrupted your preference file and need to [trash your preferences|http://support.apple.com/kb/TS2611] before continuing.
Why don't my clips appear when I open the Log and Transfer window?
Make sure your camcorder records AVCHD in a format supported by FCE4. It should be connected to one of your computer's USB ports (never connect it to an external hard drive or other external device such as your keyboard or a USB hub), powered on, and set to video playback mode.
If the camcorder +does not+ mount on your Desktop your USB port or cable may be malfunctioning. Try plugging it in to another port or using a different USB cable to see if it makes a difference.
If the camcorder does mount on your Desktop but the clips do not appear in the Log and Transfer window you will need to point the program to the directory that contains your media.
First, click the Add Folder button in the upper left of the Log and Transfer window. The button looks like this:
Then, you will need to navigate to the root directory in which your media is stored. Most camcorders call this folder "PRIVATE" or "AVCHD" and it should be located at the very top level of the camcorder when mounted. If your camcorder records to a valid AVCHD directory structure then your clips should load after the Add Folder process is completed.
I would like to keep a working backup of my original clips so that I can delete them off the camcorder's internal memory. How should I do this?
There are two main ways to keep a backup of your clips. The first is to ingest every clip on your camcorder through the Log and Transfer process, and store the Apple Intermediate Codec files the application creates in an easily accessible place such as an external FireWire drive. The advantage of this method is that you have the ability to open back up old editing projects, reconnect the media as necessary, and keep going as if you'd never left. However, due to the large amount of space AIC takes up (usually somewhere in the vicinity of 41-50GB an hour when transcoded from AVCHD), this is not always feasible.
Another often preferable approach is to copy over the root directory in which your clips are stored (usually named "PRIVATE" or "AVCHD") from the camcorder to your computer or an external drive. As long as you maintain the original file structure, you will be able to ingest your clips again at a later date using the "Add Folder" process detailed above to navigate to their new location.
My clips appear, but when I attempt to ingest a red exclamation point appears and the window displays the message "Error: No Data"
This is one of the most common problems that users experience when trying to ingest their media through the Log and Transfer process. Luckily, it also has one of the easiest solutions.
In the Log and Transfer window, click on the gear icon in the top right and select "Preferences" in the contextual menu that appears.
Make sure the video is set to transcode to the Apple Intermediate Codec and the audio is set to Plain Stereo.
After doing so, hit OK and try to ingest again.
I am experiencing a problem that is not covered in this tip or the solutions here do not work.
The best thing to do at this point would be to trash your preferences and start a new topic in the [FCE Forum|http://discussions.apple.com/forum.jspa?forumID=936&start=0] with a detailed description of your problem. Check out the user tip on [Basic Troubleshooting in Final Cut Express|http://discussions.apple.com/thread.jspa?threadID=2662419] for more information.
This is the 1st version of this tip. It was submitted on December 03, 2010 by skalicki`.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Help! I've deleted my voice memos playlist on iTunes. How do I transfer my voice memos on my iPhone to iTunes for a second time?

Help! I've deleted my voice memos playlist on iTunes. How do I transfer my voice memos on my iPhone to iTunes for a second time?

You need to have the latest version of iTunes on the computer, version 11.1.3 to be able to handle syncing a newer phone with iOS 7. The iTunes on the iPhone has nothing to do with syncing and is installed by the iOS.
Go to iTunes on the computer, click on Help, Check for updates to update iTunes on the computer, or go to to www.apple.com/itunes/download and download and install the latest version of iTunes to correct your problem.

Transfer large voice memos after deleting them from iTunes

I cannot for the life of me figure out how to transfer large voice memos to my computer from my iPhone.
I synced my phone without changing the names of the voice memos--- so they were in iTunes in a random order and it just confused me. I deleted them in iTunes and renamed them in my voice memos..... now I can't download them with the correct name! I can't find how to get them back off the iPhone into my iTunes or even to my desktop to burn onto a CD. ???????
I cannot email them or message them because they are large files. I've tried to email them and it states that an email has been sent (there was an email sent sound) but nothing ever shows up in my email account.
All I want to do is put my newly titled voice memos into a folder on my desktop.
PLEASE help! I wish this was easier to do!

i feel your pain
this is so infuriating
it's great little app, and so easy to record audio on the fly.
BUT then absolutely impossible to easily transfer them to my desktop.
infuriating

Can an individual create a voice memo for free on their Windows based laptop via Apple website and then send it to perhaps an iCloud client?

I am hard of hearing and will likely become deaf one day, so for me receiving voice memos (not telephone voice messages) on my iPhone is a nice treat! Unfortunately not everybody has an Apple device. Some of my family members and friends have tried to create a voice memo via Windows Media Player and sent it to my email, but as most know... I can't play the voice memos on my iPhone even after trying to use a conversion program to convert the voice memo.
So my question is... Can any individual (regardless of device they use) create a voice memo for free on the Apple website and sent it to an Apple client?
i absolutely love my iPhone. The accessibility options are wonderful to have for people who are deaf or hard of hearing. But having this one accommodation done for the hard of hearing people specifically
Thank you!
Angèle

cfr wrote:
@lahwaacz,
Could you point me to documentation regarding bugs/problems with laptop-mode tools? I'm using that right now and it has always worked pretty well but I'm currently seeing higher temperatures (~10C higher on average) and trying to figure out why.
My fan operates continually but not, I think, very aggressively. But it has always done that so I assume it is normal for this laptop. (Have no idea really but it doesn't seem out of the way - it is a laptop, after all...)
I don't know anything about fan control, my laptop controls fan speed automatically, I can't even get current fan speed.
The main problem with laptop-mode-tools is that it's very huge, and the bigger the program is, the slower is the execution. Another problem is that it's connected to both battery and AC adapter ACPI events (see /etc/acpi/events/lm_{ac_adapter,battery}). On my laptop, those events are sent at the same time, resulting in running laptop-mode-tools twice. Most people once configure laptop-mode-tools to their liking and their hardware, so I think there is no need for such an extensive software like laptop-mode-tools, if something simpler does the same (or better) job.
Also laptop-mode-tools can conflict with pm-utils (which are installed on many systems as dependency for some packages):
https://wiki.archlinux.org/index.php/La … able_on_AC
https://bbs.archlinux.org/viewtopic.php?id=106989

How do I transfer a voice memo from my Ipod touch to my windows 8 laptop please?

How do I transfer a voice memo from my Ipod touch to my windows 8 PC please?

Hi its pretty simple. So
*First download the latest iTunes version and install it on the PC.
*Plug in your Apple Device to your PC
*The iTunes window will automatically pop up when you have connected your device, if it doesnt happen , open iTunes manually.
*Choose Your device and there it would show you the "Summary","Apps", "Music","Movies" etc etc..
*Go to Music and click on the option "Sync Music"
*When you tick that option , the other options would be enabled.They are the "Entire Library", "Selected Playlists...", "include music videos", "include voice memos".
*Tick only "Include voice memos"
*Now it should start syncing and show you a separate folder saying Voice Memos on the Left side where all your other folders are there on itunes page.
*You can access those audio files by going to the C:_Users*_My Music_iTunes_iTunes media_Voice Memos!!
NOTE: IF THOSE VOICE MEMOS DONT GET TRANSFERRED TO YOUR PC , THEN IN YOUR DEVICE , NAME ALL YOUR VOICE MEMOS AND THEN TRY THE WHOLE PROCESS AGAIN.
NO NEED TO BE DOWNLOADING THE ITUNES AGAIN AND AGAIN.
Hope this helps You

New classic does not have voice memo feature

Greetings.
My new 120gb classic does not have voice memo feature. The other 120gb classic I have does have this feature. Any ideas why this discrepancy exists? How do I get voice memo feature installed?

I'm skeptical of this notion, that a microphone must first be connected. This is my second 120gb ipod classic, both brand new, or seemingly....First one has never had a mic connected to it yet still displays "voice memo" menu feature. Unless, of course, someone before me had plugged a mic into my new classic ipod? Will try to plug mic into it and see if feature option appears though.

HT2737 I am registered with itunes uk and have recieved a voucher for itunes us. How can i use this?

I am registered with itunes uk and have recieved a voucher for itunes us. How can i use this?

iTunes Gift Vouchers can Only be redeemed in their Country of Origin.

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

Please also see Boot Camp: Set the default operating system.

I have a pc with windows8.1 and it automatically puts download docuements to windows reader and cannot choose adobe acrobat instead or delete windows reader. How to i make adobe acrobat my download default for docuements instead of the windows reader.

I have a pc with windows8.1 and it automatically puts download docuements to windows reader and cannot choose adobe or delete/ get around the reader and the reader is jammed from deletion. How do |I make adobe acrobat my default reader?

Open Acrobat manually and go to Edit - Preferences - General. Click the "Select Default PDF Handler" button and then select Acrobat from the list and click on OK. The next time you open a PDF it will be opened in Acrobat automatically.

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

I bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??

i bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??

You need to contact the previous owner and have them follow these instructions: http://support.apple.com/kb/HT5661

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

I just started my Macbook air the first time, connected it with my wlan and know it asks me for a password and it does not accept the only password I know, what can I do?

It needs the user password for the wireless router, that would have been set by whomever installed the router, if that was you then try to find the password. If you can not find the password reset the router to factory default and set it up again.

Voice memos are not transferred to my Mac

I am trying to transfer some voice memos from my iPhone to my Macbook. I select 'include voice memos' in iTunes under the Music tab. But all what is doing is to transfer voice memos from my Mac to my iPhone, not vice versa. After syncing when I check the voice memos in the side bar of the iTunes I do not see my iPhone's voice memos. Any help is greatly appreciated.

I'm having the same problem. The voice memos do not transfer to my G5. Some people get a Voice Memo folder in iTunes but I don't. On the smaller sized memos I have been e-mailing them to myself and then they show up int iTunes. Once they get into iTunes I found them in a folder called Unknown Artist.
It would be really helpful if some one could fix this problem with the transfer. I have recorded my 99 year grandmother using this but because they are too long and the transfer doesn't work, I can't get them off my iPhone.

Mircomeno with a classic and transfer a voice memo for a windows to a Mac

Similar Messages

Maybe you are looking for