Mircosoft wireless mouse problem in X220 with docking

Hi,
I have an issue about X220 with docking.
When I un-dock the laptop for meeting, the Microsoft wireless mouse is working fine. However, when I finish the meeting and re-dock on the docking station, both the wireless mouse and keyboard is not working. I tried to unplug and plug in the wireless receiver but cannot solve the issue.
Since I have lots of meeting and this problem is really annoying me. Does anyone know how to solve this problem.
Thanks.
Ivan

Hi, gogpop
For the issue with the wireless mouse, I would recommend uninstalling the UltraNav driver from Device Manager. The UltraNav driver, in my experience, can sometimes cause issues with the mouse. To uninstall the driver, open the Charms Bar from the right side of the screen and select Search. Type Device Manager into the search bar, then select Settings from underneath the search bar. Device Manager should now be visible on the left side of the screen. Select it. When in Device Manager, open the tree for Mice and other pointing devices. Right-click on ThinkPad UltraNav Pointing Device (if available) and select Properties. Select the Driver tab and then click on Uninstall... at the bottom. Follow the prompts to remove the driver and then restart the system. After the uninstallation of the UltraNav driver, Windows should install a generic driver, which may help your issue. 
As added security and reliability, I would also recommend installing the base Synaptics driver from here. Synaptics is the same company that makes the UltraNav driver, but their base driver seems to have less issues, so it's definitely worth a shot.
As for the wireless issues, I would recommend navigating to Control Panel ► Programs and Features and uninstalling the Intel Management Engine Driver (if here.) This program is sometimes found on machines with Intel wireless cards and its removal can greatly help wireless issues.
Lastly, if you haven't already, I would also make sure that all drivers and BIOS are up to date, all of which can be found here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • I have anew iMac, less than 3 months old -  over the past few days i notice my wireless mouse keeps looksing contact with the mac. why is this?  anything i can do ?

    I have a new iMac, less than 3 months old -  over the past few days i notice my wireless mouse keeps loosing contact with the mac. why is this?  anything i can do ?

    thanks.   battery level is ok.  have just reinstalled the mouse.....  as to whether the problem continues, i'll have to see over next few days......thanks for your help

  • Apple Wireless Mouse - No Longer Pairs with Mac Mini?

    Hi there,
    I've had an Apple Wireless Keyboard and an Apple Wireless Mouse for several months. Unfortunately, the Apple Wireless Mouse no longer pairs with the Mac Mini (Core Duo, 1.66) -- it is getting very frustrating.
    I've tried rebooting the machine, restarting the mouse, and nothing works. Sometimes I get the Bluetooth Setup Assistant which says that it found 1 Mouse, but it failed to pair.
    I replaced the batteries, but nothing changes.
    Help!

    Normally that's caused by debris under the trackball preventing the rollers from moving.  Turn the mouse upside down and rub the trackball Vigorously with a microfiber cloth. 
    The symptoms are usually that scroll will work one direction but not the other.
    Captfred

  • I have wireless mouse does not work with boot camp

    i have wireless mouse does not work with boot camp

    Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

  • Original Wireless Mouse will not pair with computers using OSX (10.6.2)

    I have two original Apple Wireless Mouses (Mice?) [Model No: A 1015 EMC No: 1938] neither of which am I able to pair with either of my Macs (Mac Pro & MacBook Pro). I believe there is some kind of incompatibility issue with these devices and the Snow Leopard OS.
    When I try to set up the wireless mouse using Bluetooth Setup Assistant a connection is established, but the pairing attempt is unsuccessful. I have tried using all of the Passcode Options, but each time the pairing attempt is unsuccessful.

    I am having the exact same issue. After switching batteries last week, I was no longer able to pair my original Wireless Mouse (model A1015) either. I'm also running 10.6.2 and never had this problem before.
    When setting up the mouse, it does appear in the Bluetooth connection panel, correctly says "Connecting" but then stalls in the "Connected" phase and then times out with "The pairing attempt was unsuccessful".
    I tried restarting my Mac and leaving the batteries out of the mouse for a day, to no avail. I just repaired my Apple Wireless Keyboard successfully, so this seems to be mouse-specific.

  • Wired and wireless mouse problems...

    Hey, looking for someone who can help me with a mouse connection problem I'm having with my G4 powerbook. Originally I was using a bluetooth wireless mouse and it would seemingly loose its connection. Example, I'm surfing Safari and I go to click a link with my mouse and then the cursor disappears up into the left corner. I have to move it around a bit before it gets its connection back. To test this I put the computer with hot corners to start expose. I would be surfing and BAM expose is activated.
    Ok potentially crappy mouse. I plug in my USB mighty mouse and BAM, it does the same thing. I still have apple care on the laptop, but the nearest apple store is an hour away so I was hoping someone might be able to shed some light on this annoying problem.
    Anyone...?

    I have the same issue. Left and Right buttons are programed as "primary" and "secondary" respectively, but any action on the mouse activates the right button drop down menu. I changed out my wireless mouse to the wired mouse, rebooted and changed USB ports but not change. My keyboard is not typing either?
    Looking forward to some GURU type insights here....?

  • Is there ANY wireless mouse that will work with the iPad 2 and Apple's Wireless Keyboard?

    I have the iPad 2 and Apple's Wireless Keyboard and would like to purchase a wireless mouse that will accommodate my Apple products. I do understand that Apple's Magic Mouse is not compatible with the iPad 2, but would like to hear if there is any possibility that i could use a wireless mouse with my iPad.
      Thanks :)

    You don't have to purchase a mouse. You already have one, it's wireless and the only one that will work on an iPad.
     Cheers, Tom

  • Wireless Mouse Problem - Losing its "connection"

    Every couple minutes my wireless mouse loses its "connection".  Once the computer acknowledges the loss with the little message at the bottom of the screen, it quickly reestablishes the connection.  Since this started happening last week, the frequency of occurence has significantly increased; and when I'm using my mouse a lot, as with photo work, the disconnection rate reallly jumps.  And yes, the batteries were fresh last week!

    Do both a SMC and PRAM reset, it may take 2-3 attempts of each.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Wireless Mouse  Issues on Restart with Snow Leopard

    I have a late 2006 iMac (2.15 GHz Intel Core 2 Duo) with an Apple wireless mouse. I just installed Snow Leopard and everything seems to be fine with one exception. Upon Restart, the mouse becomes disabled. The only way to get it to work is to move the slider under the mouse back and forth--that seems to re-establish the connection at least until the next time I restart.
    Has anyone else experienced this issue? Is there a solution?

    This is also happening on my MBA(1st gen). Wireless keyboard as well.

  • USB Keyboard and USB Wireless Mouse problems

    G4 Dual
    OS TIGER 10.4
    A USB Wireless Mouse
    A USB (Wired) keyboard
    Here's my problem(s):
    1. Keyboard: sometimes freezes, then works, then freezes, then types the keyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy - forever.
    2. Mouse: sometimes freezes, then works, then freezes, then randomly grabs my windows and won't let go!
    Help!

    G4 Dual
    It looks like you got off track. This is the iBook G4 discussion area. You should post your question in the appropriate Power Mac G4 discussion area.

  • HT3887 wireless mouse problem

    why does my wireless mouse keep diconnecting and connect? it wasn't doing it before....

    Hello:'
    In answer to your question...no one can tell the reason from long range.
    Try these things:
    Reset PRAM
    Reset SMC
    Make the device a favorite.
    Barry

  • Wireless mouse problem

    Having bought the new Magic Mouse for my Mac, I now want to use my older Wireless Mouse on a Windows XP machine, in fact an Eee Box. (XP SP2)
    Can someone tell how, please - as so far I have been unable to make it work.
    Dan.

    The wireless mouse appears to be "paired" on my XP system, but if I go to mouse properties/services, where it says ---
    "The Bluetooth device offers the following services. To use a service, select
    the check box"
    -- and click on "drivers for keyboard, mice, etc." -- I get a box headed
    "Bluetooth Service Error - access is denied"
    Why does this technology have to be so complicated to setvup ?
    Dan.

  • Logitech wireless mouse doesn't work with Linux 3.10

    When I rebooted after updating to the 3.10 kernel my mouse stopped working. The cursor is displayed but it doesn't move. I downgraded back to 3.9.9-1 and it works fine again. As far as I could see it was detecting it in the dmesg output, so I'm not sure of the cause (maybe just a regression in the driver). I've never had any problems with this mouse before.
    The mouse is a Logitech M515 connected wirelessly with a Logitech Unifying receiver.
    This is the dmesg line (on 3.9.9):
    logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
    Last edited by shaurz (2013-07-25 19:20:53)

    Mine works fine with Logitech Anywhere MX, never noticed any problems. Is this still an issue?
    According to the bug report, Logitech Anywhere MX should be broken I guess. If you need any info dumped to figure out why it's working for some, tell me what you need.
    Kernel:
    Linux xarch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
    lsusb:
    Bus 007 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
    dmesg:
    [ 3.332661] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
    ( I have a keyboard attached to the same unifying receiver. Paired them up using a windows laptop. Maybe that's the difference? I guess pairing hardware to the receiver using logitech software could theoretically mess with... uhm... magical internal mapping stuff that I have no idea how it works? Ok, I'll stop guessing making things up now ,  good luck with the bug :3 )
    Last edited by whoops (2013-07-29 10:54:39)

  • S405 Wireless Networks Problem Windows 8 with SSID's

    S405 keeps refreshing and shuffling wireless networks. Most of the time it won't show our SSID. We have other thinkpad devices, other wireless tablets/consoles, non of them have this problem.
    I was also able to replicate the same issue with another router (in fact we replaced our router recently, and same issue was present before) and it is still happenning.
    Another interesting thing is, whatever our SSID is, S405 specifically hides that SSID, this is the most frustrating part. Why would it not display on the list of available networks? I changed the SSID, and it is still not finding it. I made the SSID visible thinking that was the problem, still no luck.
    Is there some sort of bug in S405 that makes it not play well with Windows 8 wireless networks?
    Are there any applications that I can use to make the extremely restricted Windows 8 networks screen a little more Diagnose-Friendly?
    PS: The SSID will show up once in a while allowing us to connect, or sometimes it won't show but will connect magically, this happens after we turn wireless on/off, reboot laptop, or try other various ways to get it to connect.
    Thanks in advance!
    • X220, Intel i5 2540M, 12.5", IPS, Bluetooth, Fingerprint, Camera, 6-Cell, Win 7, Intel 6205
    • S405, AMD A6-4455M, 14", 4GB RAM, Win 8

    You cannot right-click an INF file to install a device driver. When the device is attached, the system will ask for the INF file and driver. You can also use the DevCon tool in the WDK
     -Brian
    Azius Developer Training www.azius.com Windows device driver, internals, security, & forensics training and consulting.
    This is outdated information.  In Windows 8.1 and later, we right-click to install drivers against both ACPI and PCI devices and it installs just fine.  It does not work in Windows 7.

  • Wireless mouse problem mountain lion

    I seem to be having a problem with my Magic Mouse after updating to 10.8.3. any one else having the same?

    I´m having same issues, I´ve read numbers of threads in the forum where it´s suggested you reset PRAM, unpair-repair, reboot, removing extensions files. But nothing seems to work. I can move the cursor and simple click but none of the multitouch functions works.
    HELP!

Maybe you are looking for