MIRO and MIGO data connect

hi friends,
is there any possible to pass data entered in one tcode to another
eg.. i am entering header text in tcode MIRO has vehicle
i should get this same header text in tcode MIGO
is it possible
thanks
regards
raj

Similar Messages

Can't i use xml schema and oledb data connection at the same time?

Hello to all and thanks in advance.I use xml schema and oledb data connection at the same time and the problem is that when I try to export the xml, the outcome is not what i expect.Without the oledb connection everything is ok (just the schema) and the xml complies with the schema.
Can't i have both schema and oledb and the exported xml be as i want it?

You can use both at the same time, but not gor Internet access if that's what you're asking.
Now there is a thing called Link Aggregation, which combines a number of interfaces for speed/redundancy, but it really only works locally, and then only with ALL special equipment in the route, and most likely OSX Server involved.
Sorry.

About MIRO and MIGO

Hello,
I am new for FI module.I want to know about MIRO and MIGO relation and what is it.and from which tables i can find values of it?
thanks
soniya

Hi Soniya,
Th transaction MIGO is used for posting Goods movement related documents.
It is actually an Enjoy transaction from where we have options for
Goods issue
Cancellation....
and so on.
The corresponding entries for Goods Issue will be found in the MKPF.
MIRO is another Enjoy transaction and is used for Invoice postings OR Commonly known as Invoice verification.
Consult your functional for more information about this. You be able to understand this faster then.
Regards,
Prakash Pandey

WIFI and mobile data connections not connecting with any other outside WIFI networks. Bluetooth not working in car. Any solution?

After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.

Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-...

MIRO and MIGO

Hi everyone,i would like to know about MIRO and MIGO?

Hi,
1.MIGO: Used for all Goods Receipt WRT PO,Partial Goods Receipt of a PO & Adjustment of Physical Inventory Difference etc...
For more check the links:
http://e-mory.blogspot.com/2008/02/sap-migo-goods-receipt.html
http://e-mory.blogspot.com/2008/02/sap-migo-partial-goods-receipt-of-po.html
http://e-mory.blogspot.com/2008/02/sap-migo-adjustment-of-physical.html
2.MIRO: Used for Vendor Invoice Verification
For more check the link:
http://e-mory.blogspot.com/2007/11/sap-miro-enter-invoice-verification.html
Regards,
Biju K

Difference between passive and active data connection mode for FTP

Hi,
Does any body have the idea of passive and active data connection mode for the transport protocol FTP.
I have one server with FTP, I have to pick the data from this FTP to XI.
What is the difference between active and passive data connection? Does XI supports both the connections?
Thanks & Regards
Katta Mohan Reddy

Hi
According to SAP Note - 821267
Q: Does the File Adapter support active data connections when connecting to an FTP server?
A: Up to and including SP14, the File Adapter exclusively uses passive data connections. Starting with SP15, active connections will be available.
Difference between active and passive,
You can definitely refer to the site mentioned by Suraj
cheers
Sameer

Nokia 5310, bad USB cable and no data connection v...

1. The USB cable shipped with my phone does not fit into the phone. What can I do?
2. Connecting via bluetooth I can not transfer contacts or organizer info. I get this message "Data transfer not possible. Check data connection." What do I do to fix this?

23-Sep-2008 11:22 PM
kiddco wrote:
1. The USB cable shipped with my phone does not fit into the phone. What can I do?
2. Connecting via bluetooth I can not transfer contacts or organizer info. I get this message "Data transfer not possible. Check data connection." What do I do to fix this?
1> Try to return it back and probably get a replacement.
2> What do you mean? Connecting phone to PC?

Fstream on a text file and exel data connection breaking

Hello,
I am writing to a text file using C++ code below (VS 2008). Then I do a "Data Connection" from excel2013 to this text file: the purpose of this is to have a "live" display of some graphs based on this log file. Parameters
of the data connection is shown below.
That works fine for some time (a few hours), then for some reason, the log file stops being updated, although the C++ program is still running. No error message displayed.
Same thing happens if my C++ program just ouputs on the console using cout<< and I redirect the ouput in a logfile using the redirect DOS ">".
Anyone has any idea??
It is is so magical to have this live excel view of my batches, I would love to use that! Thanks.
LogFile.open(LogFileName.c_str(), ios::app);
if (!LogFile.is_open())
cerr << "Could not open: " << LogFileName << endl;
else LogFile << "This data" << endl;LogFile.Close();

Does the problem occur when some large file size is reached, such as 2G? The issue can be caused by some limitation of older library (https://connect.microsoft.com/VisualStudio/feedback/details/627639)
or by a limitation of Excel.
If the issue is observed even on medium files, then try analyzing the status of stream (LogFile.bad() etc.) after “<<”. Perhaps it fails occasionally when Excel accesses the file. Check you program when Excel is stopped.

Since updating the IOS to the latest version, and I'm having problems with the voice calls and the data connection

I'm facing a problem receiving calls, and connecting to data since I updated the IOS to the latest version

Hi there Abdallahbaba,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
-Griff W.

Breaking Links to and External Data Connection using the cubevalue() function

I have spreadsheets that connect to an MSAS cube successfully and pull data in the cells using the CUBEVALUE function.
Is there a way to perform the equivalent of 'breaking links' to the external database so that the spreadsheet can be distibuted to others that will not have the external database connection set up on their computer/excel environment.
I find that if i email a spreadsheet with data retreived using cubevalue functions to someone without the external database connection they do not see the values preserved with the spreadsheet and end up with blank or zero cells, etc.
I have unchecked the box related to 'refresh data when opening file'.
In a perfect world i would like to remove the db connection and be left with pasted values, similar to breaking links to an external workbook but I am not sure if that is possible.
I am desperate to find a way to distribute these spreadsheets and be confident that Excel won't be unsuccessfully trying to refresh a connection that isn't on other peoples computer.
Thanks for any guidance

Maybe you can upload a sample file to a file sharing site and then share the link with us.
As you said you have already unchecked the option 'Refresh data when opening the file' within Connection Properties.
When you send the Excel file to someone without this data connection, they should get the correctly data unless they click the button 'Refresh All'.
Wind Zhang
TechNet Community Support

Cost Center in MIRO and MIGO

Hi All,
1) A PO is created with one line item on cost center 10010.
2) Discount condition of 10% is used in CONDITIONS
3) On doing MIGO, material is charged on 10010 while discount line item is charged on 10020 as defined in OKB9
4) On doing MIRO, both material and discount line is charged on 10010
Is there's something missing in MIRO as discount line should be charged to 10020 rather on 10010?
Looking forward to resolve this issue.
Warm Regards,
Nayab

Hi Raghavendra,
Thanks for your response.
As per the configuration,
I have a PO of Single Item.
In Item Details I have used Cost Element 900102 & Cost Center 10020 in Account Assignment Tab and
Condition of 10% discount is used in Conditions Tab.
When I do MIGO, I get the following entries
Expense Account 900102 agains cost center 10020
Discount Account 900106 against cose center 10055
GR/IR Account 400203
Cost center 10055 is derived as cost element 900106 is assigned this cost center in KA03 as well as OKB9
When I do MIRO, following entries are the result
Vendor Account 55252
Gr/IR Account 400203
Discount Account 900106 against cost center 10020
This cost center should be same as in MIGO due to configuration in Master Data (Txn KS03)
or cost center in MIGO should be same as in MIRO (i.e. derived from the PO)
If I put no cost center in KS03 (master data) or OKB9 against 900106 cost element, it prompts to assign CO to this account while doing MIGO.
Looking foward for assistance in resolving this issue.
Warm Regards,
Nayab

Customs MIRO and MIGO

Hi,
I have entered the values of CVD and Customs duty during Customs MIRO as 100 USD for each line item and saved.
When i do MIGO,asked for commercial Invoice number,entered and saved.
When i see the FI documents,the each line item value varies from 100USD to 193.75 USD.
How this change happens and where should i correct?
Please reply.
Regards

Hi,
In the customs MIRO you need to give the PO number and select Delivery costs than automatically the values will be displayed.Without this if you entered manully that amount is adding to the exisisting values.

PI and Abap Data connectivity

Hi All,
we are working on PI and Abap connectivity and its done but,
when I execute SPROXY transaction in ECC, I see Service methods..I am not sure which method to use to write the ABAP code to push the data to PI server.
Earlier In XI 3.0 I used execute asynchronous method.
BUT here i have PI and am clueless with PI methods.
Can anyone share some documents or link or sample code to let me know under which method of PI i can write ABAP code ?
Thanks
Meeta

Hi
Could any body share with me the sample abap code for outbound in PI or XI and Abap connectivity via Proxy..
i have a requirment for Outbound where i need to fetch data from ECC and abap has to send data to PI or Xi.....( Outbound )
Please not i need for Outbound and not for Inbound
Points will be rewarded for most relevant help..
Thanks
Meeta

Fixation for ER in MIRO and MIGO

Hi:
Is it possible to keep the ER fixed both at the time of MIGO and MIRO...If possible then please advice.
Br

Hi,
You can set ER as fixed at PO header level in ME21N.. This will do the job.
Regards

MIRO and MIGO number range for new financial year

All SAP Gurus,
We want same number range to be continued for MIGO and MIRO documents.
Is it needed to create the number range for MIGO and MIRO for new financial year or same number range will be continued automatiaclly?
Regards,

hi,
The number range to be applied for the MIGO And MIRO documents depends on the YEAR which you have feed while maintaining the number range...If you want a new number range for next year, then you can maintain it from above transactions...Or if you wanna continue wid the same then can use the same number range as well...
As suggested maintain the number range get it applied, but remember if you maintain the number range as 2010 then that number range will be valid for the given year only...but if you give the number range 9999 then it will be valid upto 9999 year...
Hope it helps..
Regards
Priyanka.P

MIRO and MIGO data connect

Similar Messages

Maybe you are looking for