MIRO and MIGO number range for new financial year

All SAP Gurus,
We want same number range to be continued for MIGO and MIRO documents.
Is it needed to create the number range for MIGO and MIRO for new financial year or same number range will be continued automatiaclly?
Regards,

hi,
The number range to be applied for the MIGO And MIRO documents depends on the YEAR which you have feed while maintaining the number range...If you want a new number range for next year, then you can maintain it from above transactions...Or if you wanna continue wid the same then can use the same number range as well...
As suggested maintain the number range get it applied, but remember if you maintain the number range as 2010 then that number range will be valid for the given year only...but if you give the number range 9999 then it will be valid upto 9999 year...
Hope it helps..
Regards
Priyanka.P

Similar Messages

Document numbering for new financial year

Hi
i cant update assign first starting number 1 for new financial year. when i make any document its starting from last number of last year. like last year last number is 125. but i want this FY (2011-2012) staring number 1 for any document. but its starting from 126
How can i do this???
Regards,
Mizan

how can i close No. series??
"Also please be sure that you have closed the previous no. series with last no. and lock it."
your note
please see below link and open attachment. what i have done you can understand.
http://www.sendspace.com/file/diojs5
regards,
Mizan
Edited by: mizan700 on Aug 2, 2011 11:26 AM

MIGO -Number range for trans./event type WE in year 2012 does not exist

Hi to all
i got one erro while going do MIGO , error is
Number range for trans./event type WE in yar 2012 does not exist .But i checked in OBA7 for the document type WE for that company code i have already maintain number ranges for the year 2011. but system showing error message is WE in year 2012 does not exist . how it showing .Actually My fiscal year is 2011 . why system asking maintain number ranges WE in year .After that i maintaion number ranges for the fiscal year 2012 . and try to post MIGO but i got the same error .Please help us in this sence
Error Details :
Number range for trans./event type WE in yar 2012 does not exist
Message no. M7562
Diagnosis
The number range for document number assignment has not been maintained in the year 2012 for the transaction/event type WE.
Procedure
Contact your system administrator.
If you are authorized to do so, do you want to check the number ranges for the
u2022     Material documents
u2022     Reservations?
Thanks in Advance
Rajesh

Hi Tej,
Even I am getting the same error
"number range for trans./event type WE in year 2014 does not exist"
I have maintained the below number range in tcode OMBT,
Am I missing anything?? Please help!!

Internal and external number range for a deivce

Hi Experts..
We have a client requirement where in we need to have both external and internal number ranges defined for the device.
But while creating a device it always takes external number range and never takes internal number range.
What is the possible reason for it and how can i rectify it.

Hi Arvind
do u mean even when an externam name is provided in the device creation and still the screen does not accept it?
let me know
kr
raj

Sales /Outgoing Excise Invoice number Range for J1IIN

Dear Gurus,
We are doing STO from excisable plant 1000 to plant 1100. We created a PO with document type UB ( STO) and created delivery with reference to PO and created billing document ( delivery challan). Against billing document number we created sales excise invoice in J1IIN for financial year starting from 1st April 2010. In J1I9 we have maintained number range for 2010 financial year in object J_1IEXCLOC for respective series group s1.Still when the outgoing excise created, the system continued last financial years number range. In entire flow from PO till MIGO and billing document and creation of excise invoice the input date is 6th of April i.e. current financial year. This is our first sales outgoing excise invoice creation in new financial year for which number range is maintained properly.
My question is why system took last financial years number range even though the date in all the documents is falling in new financial year.
Will appreciate the answer.
Thanx in advance
Regards
Nilesh

RESOLVED

Multipe number range for indonesia tax invoice no.

Hi All,
I have one question to confirm with you all:
Our indonesia office need to print out tax invoice when billing document is created.
The format is TTS.BBB-YY.NNNNNNNN , and only TTS is fixed, the other 13 digits changes.
And we can only get one number range from tax office for almost one month's usage, which means we can not maintain the number range for one whole year in one time.
Question 1: How to maintain mulitple of number ranges for one year:
I'm thinking if we can maintain different number in table "V_OFF_NUM_ID"
2014/01/01 – 2014/12/31 900    ID0114 01
2014/01/01 – 2014/12/31 901    ID0114 03
2014/01/01 – 2014/12/31 902    ID0114 04
2014/01/01 – 2014/12/31 903    ID0114 05
2014/01/01 – 2014/12/31 904    ID0114 06
But the "code 2" is same sometimes, so I have to do so
2014/01/01 – 2014/12/31 900    ID0114 01
2014/01/01 – 2014/12/31 901    ID0114 03
2014/03/28 – 2014/12/31 901    ID0114 04
2014/01/01 – 2014/12/31 903    ID0114 05
2014/01/01 – 2014/12/31 904    ID0114 06
But if so, I don't know when the billing date is after 2014/03/28, and the number "03" is not used up, system will pick number range of 04 or 03?
Question 2:
The revision billing document after reversal must have the same tax invoice no. with the "original billing" & reversal billing"
The SAP standard use new tax invoice no.
How to realize it?
Question 3:
YY is year and defaulted from billing date?
Thanks and best regards
Cathy

You are correct that this is statutory requirement, and SAP deliver the solution, you can refer to note
1033737 - Indonesia: Tax Invoice & VAT Reporting 1107 .
However, from 04/2014, the requirement changes
TTS.BBB-YY.NNNNNNNN
Before: Only NNNNNNNN changes and SAP suggest using one number range
Now: BBB-YY.NNNNNNNN changes, and there are quite a few number range per each year.
Can not get one number range for one whole year.
Therefore, I raised my question as above. However, I think I have answer to my question, just I'm looking for one more perfect solution if there is:
1> The answer for 1st question
When the "code 2" is same sometimes, I will maintain as below
2014/01/01 – 2014/12/31 900    ID0114 01
2014/01/01 – 2014/12/31 901    ID0114 03
2014/03/28 – 2014/12/31 901    ID0114 04
2014/01/01 – 2014/12/31 903    ID0114 05
2014/01/01 – 2014/12/31 904    ID0114 06
By testing, only if the number of 03 is used up even though the billing date is 2014/04/01, the number 04 will be used, so should be okay.
2> The answer for 2nd question
The revision billing document after reversal must have the same tax invoice no. with the "original billing" & reversal billing"
The SAP standard use new tax invoice no
Since there are only 3-4 reversal per year, so user can realize it by changing the "current number" in J1AB
You mentioned it in
http://scn.sap.com/thread/3519329
but I did not try until I'm sure it will work
3> YY
I think it's should be from billing date.

Number range for credit memo

Dear gurus
My client wants a separate number range for credit memo.ie one number range for invoice verification and another number range for credit memo
Regards
sam

Hi Sam,
T Code OMR4
click on Document Type in Invoice verification
MIRO Enter Incoming Invoice
Here Doc type Add Doc gave KG Vendor Credit memo
before that define number ragne fo KG.
Hope Help U !
Regards,
Pardeep Malik

Internal HU number range for 2 different plants

Hi,
I have one plant with WM-HUM and internal number range for HU is 1.
Now implementation for a second plant (same controling area but different company codes), with his own WH number, is going to use WM-HUM.
I'm wondering what internal number range should be used for plant 2:
- same number range than P1 then no need to create new packaging material types. Just check if both plants accept to share numbers
- different number range to fastly identify which plant belongs to the HU number (without using HUMO)? But need to create new packaging material types.
Are there other SAP impacts of these solutions?
I have to precise there will be stock transport orders with deliveries between both plants.
Thank you.

Hello Cathy,
I would suggest to use the same number range considering the scenario you have mentioned .
Cheers
Kaushik

Impact of changing number ranges for FI & MM for MM Invoice documents

Hello Friends,
Client is asking to have both MM invoice document number and FI document number to be same, what will the impact of this change since we have done many transactions already in production.
Kindly suggest the best time and way of doing his.
Thanks in Advance.
Regards
Ravi

We can align both the FI and MM document number ranges in sync
SAP gives you customizing options to make both document numbers the same. The solution lies in the number range assignment of the MM and FI document. You need to configure the MM document number assignment as internal and external for the FI documents. (FI documents are set up with external-assigned numbering, while the MM document has internal, or system-generated, numbering.) In this case, the MM document number is passed on to the FI document, which means that the number of the FI document is identical to the MM document. .
Because the document number assignment in MM is not company code-specific, in contrast to the FI document, you need to take the following points into consideration before using external document number assignments for FI documents. They have the following effects on your system:
u2022     Continuous number assignments for FI documents are not guaranteed, especially if you have more than one company code.
u2022     The document number ranges in MM and FI have to be the same for all company codes.
u2022     In Release 4.6C, you need to use internal number assignments for revaluation documents, invoice reduction documents, Evaluated Receipt Settlement (ERS) postings, or reversal documents. There are no restrictions as of SAP Enterprise 4.70.
u2022     Use a different number range assignment for FI invoice posting (FB60), because FI invoice postings usually use internal number range assignments and the postings originate in FI, not MM.
u2022     If you use document parking and the number range intervals are fiscal year-dependent, you cannot change the posting date of the document if the fiscal year is different to that determined for the previous posting date. In this case you have to delete the document and re-enter it. There are no restrictions for fiscal year-independent number ranges.
please find below the confiuration steps
OMR4 - CREATE NUMBER RANSGES SAY 52 (EXTERNAL)
AND ASSIGN THE NUMBER RANGES TO DOCUMENT TYPE RE.
OMRJ MAINTAIN MM NUMBER RANGES SAY 52 (INTERNAL)
AND ASSIGN THE SAME FOR DOCUMENT TYPE RD.
Regards
P RAMASUBRAMANIAN

Number Range for Contact persons in SAP CRM

Hi Experts,
Can anyone brief me about the contact persons concept in CRM and ERP?
How and where the the no. ranges are maintained , config settings, link between ERP and CRM?
Standard Account group for contact persons in ERP and CRM?
I would appreciate and points would be awarded .
Best Regards
Suchhi

Contact persons can be maintained on both sides. In our case, we mantain contact persons mainly for needs of sales department, so we set master on CRM.
How and where the the no. ranges are maintained , config settings, link between ERP and CRM?
To define number ranges on crm side go to IMG>Cross-Application Components>SAP Business Partner>Business Partner> Basic Settings>Number Ranges and Groupings>Define Number Ranges
For number range created you have to create grouping. This grouping has to be assigned manually or automatically when creating a business partner. The business partner gets a number from the number range that is assigned to the grouping.
This can be defined under IMG>Cross-Application Components>SAP Business Partner >Business Partner>Basic Settings> Number Ranges and Groupings>Define Grouping and Assign Number Ranges
For number range created inCRM system you have to define a corresponding number range in the ERP. This is necessary to ensure that business partners created in CRM system get the same ID when they are replicated to ERP.
Go to IMG>Logistics>General >Business Partner>Customers>Control>Define and Assign Customer Number Ranges
Next define account groups under IMG>Logistics>General>Business Partner>Customers>Control>Define Account Groups and Field Selection for Customer
For each of CRM business partner classifications you have to define a mapping to an ERP account group. Run transaction code PIDE and do the mapping.
And of course your middleware settings must also be in order.
Standard Account group for contact persons in ERP and CRM?
There are no predelivered account groups for contact persons.
Regards.

Same FI and SD number ranges

Hi,
How can in the system FI and SD number range for billing documents be made same.
thanks
Rekha

Hi,
FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
Thanks
G.Bharathi

Number range for trans./event type WE in year 2011 does not exist

hi gurus
when am trying to post GR it showing me the following error 'Number range for trans./event type WE in year 2011 does not exist' please help me.

Hi,
Go to OBA7 and select the transaction event type WL and maintain number range for the year 2011.
Please check and revert.
Thanks
Hrishi

Number range for Batch - urgent help

Dear Champs,
We need to have internal number range for batches for one plant and external number range for other plant. How & Where to assign number range for plants ?
Kindly suggest
Thanks
Rajesh

Mr Rajesh
You can maintain num range internal and external independently with out any customization or development if you run batch management PLANT level.
Where plant level batch mgmt., the batch number is only known in the plant in which it was created if the stock is transferred to another plant, the batch is unknown in the recipient plant and the system does not adopt any data
And you can define independent number range for each plant.
If planned at client level need to customize using the userexits avaliable.
Message was edited by:
Pavan Kodali

FI and SD number range same

Hi,
How can in the system FI and SD number range for billing documents be made same.
thanks
Sekhar

Hi,
FI and SD number ranges can be made same for billing documents. SD number range should be made internal and FI number range should be made external.
Thanks
G.Bharathi

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

MIRO and MIGO number range for new financial year

Similar Messages

Maybe you are looking for