MIRO : Avoid to show purchase order with final invoice

Dear guru ,
I enter an invoice with PO reference as vendor using MIRO.
The system show all the purchase orders of the vendor, also the po without remaining amount and quantity.
Does exist a chance to exclude these purchase order ?
Thanks.

Dear ,
thanks but my problem is that the system take the terms of payment from the first purchase order. This can be an old po with not actual terms of payment.
I want to avoid to show these old po.
The refresh button clear the deselect po but maintain the terms of payment of the first po,
Bye,

Similar Messages

Purchase Orders with outstanding invoice - How to clear these down?

Hi,
We have a large number of purchase orders with an outstanding invoice which will never be fulfilled. I would like to know what is the process for clearing these down so the purchase orders will be marked for archiving, and so they will not be visible when running me2m with selection parameter RECHNUNG. I've tried setting the final invoice flag but I can still see the order.
Thanks,
Steph.

you have to clear the GR/IR account with MR11.

Report to Purchase Orders with Good Receipt and pending for Invioce Receipt

Hello,
I'm looking a report bring me Purchase Orders with Goods Receipt and waiting for Invioce Verificacion (MIRO).
I appreciate any help.
Regards,
Hector

Hi,
ME2N - In selection screen, enter Selection parameters as
WE102 i.e. Goods receipt exists and in output screen put a filter on "Still to be invoiced (qty)" and "Still to be invoiced (val.)" as not equal to zero OR greater than Zero.
OR use RECHNUNG i.e. Open invoices and execute the report
OR Use MB5S - GR/IR Balances

Purchase Order with Invoice Plan

Hi,
I need to understand working with Invoicing plans for a Purchase Order. Especially the service PO for the rents and other related services.
How the PO is linked to the Invoice Plan and how the process happens in SAP?
Thanks in advance!

Creating an Invoicing Plan
The following procedure describes how to create an invoicing plan with the pre-Enjoy ordering transactions (ME21, ME22, ME23).
The procedure described is also applicable u2013 with certain restrictions u2013 to the Enjoy purchase order (ME21N, ME22N, ME23N).
If you are using the Enjoy purchase order, you will find:
·         The Invoicing Plan button and the indicators for GR-based invoice verification (GR-Based IV), service-based invoice verification (Srv.-Based IV), evaluated receipt settlement (ERS), and invoice receipt (Inv. Receipt) among the item details on the Invoice tab page.
·         The account assignment among the item details on the Account Assignment tab page
·         The Goods Receipt and GR Non-Valuatedindicators among the item details on the Delivery tab page
Prerequisites
Vendor Master Record
Before you can use the invoicing plan with automatic settlement, the Evaluated Receipt Settlement Delivery indicator must be set on the Purchasing Data screen in the vendor master record.
(If you wish to enter invoicing dates manually, this is not necessary.)
Purchase Order
●     We recommend using a framework order (that is a purchase order with a validity period and a reason for rejection). The invoicing plan can adopt the validity period specified in the PO header.
●     PO items for which you wish to use an invoicing plan must have account assignment irrespective of whether a material with a master record, a material described by a short text, or an external service is involved.
●     The GR/IR control facility must be set up in such a way that no goods receipt (or, in the case of services, no service entry) is expected - only an incoming invoice. If you wish to have automatic settlement, you must also set the Evaluated Receipt Settlement indicator.
If you nevertheless wish to allow service entry sheets for the item (e.g. for information purposes only), you must set the GR Non-Val. indicator.
Customizing
Under Purchase Order à Invoicing Plan in Customizing for Purchasing, you can maintain data such as the desired invoicing plan types, date categories, and date descriptions.
Procedure
       1.      Create a purchase order with account assignment (framework order).
Click to access the item overview (or the overview of service lines if you chose item category D for services).
       2.      Enter the desired material or service, the quantity, and the price.
       3.      Select the desired item and click Account Assignments to access the account assignment screen. Enter the account assignment for this item.
       4.      Click to access the item detail screen. Check that the GR/IR control indicators are set correctly on the item detail screen.
○     The GR and GR-Based Invoice Verification or Service-Based Invoice Verification indicators must not be set.
○     IR must be set.
○     You must set ERS if you wish to have Evaluated Receipt Settlement.
○     If you wish to have service entry sheets purely for information, for example, allow non-valuated goods receipt (i.e. select the GR Non-Val and GR indicators).
       5.      Choose Item ® Invoicing Plan. A window appears, in which the invoicing plan types predefined in Customizing are suggested. Choose the desired invoicing plan type and click Continue.
You can use the following invoicing plan types:
○     Periodic Invoicing Plan
■      You use the periodic invoicing plan if the total value of the PO item is to be invoiced in each period.
■      The system creates the invoicing dates automatically on the basis of the settings in Customizing.
■      The invoicing date and the amount to be invoiced are shown for each settlement period (e.g. month). In the case of the periodic invoicing plan, the amount represents the total value of the PO item.
■      You can change the suggested dates and block individual dates for automatic invoicing if necessary.
■      You can enter the start and end dates for the invoicing plan.
■      With the Dates from and Dates to fields, you can determine that an invoicing plan does not contain invoicing dates extending over the entire validity period of the purchase order but only for a certain period within that validity period. (E.g. within a validity period from 1.1. to 12.31, only dates within the period 1.1. to 06.30.)
■      With the Horizon field, you control how far into the future dates can be created. If you enter a date rule that adds six months to the current date here, invoicing dates will be created for just half a year in advance in each case.
The system automatically creates new dates if you change the invoicing plan or when you invoke the transaction for Updating Periodic Invoicing Plans. See Generating Further Invoicing Plan Dates
■      The In Advance indicator allows you to specify whether the invoice is to be created with regard to a prior or subsequent period. (E.g. at the beginning of February, either in advance for the month of February or in arrears for the month of January).
■      In addition, fields with information on the existing invoicing plan are displayed (e.g. the calendar upon which the date determination process is based).
○     Partial Invoicing Plan
■      You use the partial invoicing plan if the total value of the PO item is to be invoiced in several partial amounts.
■      You get an empty date overview in which you can manually enter the desired dates.
■      If you work with a reference invoicing plan, the system automatically generates dates in accordance with the reference plan.
You have the following options:
●      You create a reference invoicing plan in Customizing for the invoicing plan type.
●      You enter an existing invoicing plan as reference plan directly in the invoicing plan for the PO item.
■      You can flag a date in field B (Billing/Invoicing Rule) as follows:
●      As a down payment (percentage or value)
●      As an invoicing date (percentage or value)
●      As a final invoice
       6.      Click to return to the item overview.
       7.      Click to save the purchase order item with the invoicing plan.
You can then start the automatic invoice creation process during invoice verification.
For more information, refer to the section Settlement of Amounts Due Under Invoicing Plans.
Once assigned to an item, the invoicing plan type (e.g. partial invoicing plan) cannot be changed. If you wish to assign a different invoicing plan type, you must delete the item and create a new one.
Generating Further Invoicing Plan Dates
If you have assigned a periodic invoicing plan to a PO item but have not initially defined invoicing dates covering the entire validity period of the purchase order, you can generate further dates in due course.
You have created a PO item with a periodic invoicing plan for a certain planned procurement. The purchase order is valid from 1.1. to 12.31. When creating the invoicing plan, you specified one invoicing date per month for the first half of the year. You have not yet planned any dates for the second half of the year because you do not wish information from the invoicing plan to be passed on to purchase order commitments at this stage, for example.
By mid-June, it is clear that the PO is to proceed as envisaged, and you therefore wish to schedule invoicing dates for the remainder of its validity period.
Procedure
To schedule further invoicing dates, proceed as follows:
Choose Purchase order ® Follow-on functions ® Period. invoicing plan
Specify the purchase orders for which invoicing dates are to be generated in the invoicing plan and perform the function.
A log can be created if desired.
Result
The system adds further dates on the basis of information such as the validity period or horizon from Customizing, the purchase order, and the invoicing plan.
regards,
indranil

Purchase Order with reference to Purchase Requisition

Hello
I have this situation:
One Purchase Requisition with quantity of 10.
When I issue a Purchase Order with reference to this purchase requisition, for the moment I can use this Purchase Requisition many times. For example: two Purchase Order with the same purchase requisition, same item and same quantity.
The objective is thay the system only allows to use the Purchase Requisition until the quantity is completed. For example: one purchase order for 10, or two purchase orders with 5 each. But never with a quantity superior to the total quantity in the purchase requisition.
Somebody can help?
Thank you,
Elena

Hi,
1) By setting the configuration paths as suggested by the previous posts.
2) In the first place, when converting a PR in PO Create Screen (ME21N), you should make the Open only and Released only field as Display. This way, the results will only show Open and Released PRs to be converted to PO
Hope this helps

Purchase Order History not appearing for Purchase Order with service items

A purchase order with a service item has been created. A SES has been created and Miro transactions as well. When tcode ME2L is executed, the Purchase Order History field is blank. Any configuration missing or is there an applicable OSS note to fix this?

Hi,
It is a coding error.
Could you please check if you have applied the note 1049031 with the latest version 13?
Regards,
Edit

MD04: Unable to see Purchase Orders with Item Category S

Hi,
Whenever we create Purchase Orders with Item Category S (3rd party), they are not visible in MD04 Stock Requirements list.
Is there anyway we can get the Item category S Orders to be displayed in the MD04 list?

Hi,
I am unable to see Third party POs with open quantity also.
If I create a PO with blank item category (i,e to stock, it will show in MD04)
but if i create PO with item category S (it does not show in MD04)
Can you suggest how we can get item category S POs to be displayed in MD04

Purchase order with Freight Value

Dear All,
My scenario is....
I Purchase some material to my x vendor. when he send the material , he charge freight amount on it. now please suggest me how to create a purchase order with freight value & I want to take freight effect on every material. vendor is not divide freight amount on every material. now what will i do. If i take this effect only one material than My material map get change. How to take this effect on every material.
Regards
Vimal

Hi,
When vendor send material , vendor send firght value invoicce, means at the time of PO you don't know it,so it can be consider as unplanned delivery cost in SAP and you can post this cost in MIRO ,on details tab in unplanned delivery field.
In following path you can decide where this value should add in material cost or G/l account in following path
In SPRO ,Maintain settings as shown MM---> Logistic Invoice Verification -->Incoming Invoice --> Configure How unplanned delivery costs are posted
Regards
Kailas Ugale
Edited by: kailasugale on Dec 14, 2011 10:21 PM

Creating an SRM Purchase Order with a Return Line

Is it possible within standard SRM to create a purchase order with a 'Returns Item' line?
I know it's possible in R/3 but really need to create it via SRM.
Regards
Keith

Ganesh
We are using the Extended Classic Scenario of SRM (and the Sourcing Cockpit) which therefore means that we won't be creating requisitions within R/3.
In the R/3 PO you can create a line item as a 'Returns Line' (MEPO1211-RETPO)
The standard help text is as follows:
Logistics - General (LO)
The returned goods from a customer to an internal or external vendor.
Returns can be divided into the following types, according to vendor and recipient:
Customer returns
Returns to vendor
Returns for stock transfers
I know we can use a BADI to mark this flag in R/3 but for completeness really want to show this as a returns line in SRM too.
Keith

WHATS THE FLOW OF A PURCHASE ORDER WITH REGARS TO MATERIAL MANAGEMENT ?

WHATS THE FLOW OF A PURCHASE ORDER WITH REGARDS TO MATERIAL MANAGEMENT ?

Hi
see the MM flow with related Transaction codes
MM Cycle:
Purchase Requisition-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
Reward points if useful
regards
Anji

Accounting Entries during MIRO for a WBS Purchase order - reg

Hi,
I have created a Purchase order with account assignment as Project and attached a WBS element in the Account assignment tab. There is no GR involved in this PO.
When i am trying to do the Invoice verification, it generates the accounting entries as follows
Vendor G/L account Credited
GR/IR account with Zero value
G/L account assigned to WBS element Debited.
In actual i dont want to see the GR/IR account with zero values as an additional entry as it does not makes sense to have an entry with a zero value.
Please expedite with your valuable suggestions to eradicate the unnecessary entry of GR/IR during invoice posting.
Regards,
RitiG

HI,
I hope so ,there might be a problem at the PO creation Level.
an Account assigned PO can be Payed directly by MIRO.
But the folloeing setting has to be Made .
IN the Delivery Tab,uncheck the GR Tick Mak
and in the Invoice Tab GR IV tick Mark.
if these Ticks are unchecked ,then it would be a pure PO based IV and the posting should be in the Following Manner
Vendor
GL -- COnsumption..WHich is maintained in PO
+ any TAX related GLS that are affects do due to TDS(withholding ) or TAXINN
HOpe so it helps
Regards
Anjanna

Goods receipt for purchase order with account assignment 'K'

Hello All,
There are couple of purchase orders with acc.*** "K". On doing the GR for these PO's they have been done with mvt type 103 & mvt typ 105.
I understand that material has been directly consumed to the respective cost center.
How do track the internal movement for these materials??
I need to view the stock for these materials at the cost center as in MMBE the stock is seen as ZERO.
All these materials are with QM proc ACTIVE. So a goods receipt is done 105, then the inspection lot is cleared. However, in this case as the material is directly consumed, it is NOT displayed in QA32.
Is the above procedure correct??? Is it better to receive stock against mvt type 101 & then do a 201 mvt ??
Request your inputs.....
Regards,
Manoj Reddy

Account assignment inventories are not maintained. To maintain a report for cost center receiving/issuing you need to make a customized report with help of ABAP.
Other way is to pull report in MB51, with selection criteria COST CENTER and it will give you result of stocks available on cost center. For stocks received on cost center, you can pull report with cost center and movement 101.
201 is used for goods issue to cost center from warehouse, the stock you receive from PO against 101 is directly charged to cost center, so no need to issue later to cost center.
Edited by: Afshad Irani on May 17, 2010 2:17 PM

Purchase order with -ve Qty

Hi,
Is it Possible to create purchase order with negative Quantity, right now it is issuing msg "negative Quantity will not be allowed for service based invoice verification".
If yes please suggest the config steps.
Regards,
Rani

not possible.
negative stock can be maintained for storage location for goods issue

Error while creating purchase order with account assignment category "A"

Dear All,
At the time of creating purchase order with account assignment category A - Asset its throwing error as " GL Account 123400 can not be used"
how to resolve this issue"
Edited by: Matt on Sep 16, 2010 10:09 AM - removed bold tags

HI,
Assign all assets GL to Asset Class
spro --> financial accounting new -->assets accounting --> assets accounting (lean Implementation) --> organization structures --> Assign GL
Hope Help U !
Regards,
Pardeep Malik

Default a gl account in account in a purchase order with account assignment

Hi all
I need default a gl account in account in a purchase order with account assignment P. can somebody help me. They have used a gl account which is not correct.
Thanks

Hi,
Please refer posted tread in the forum
default G/L account for purchasing documents
Regards,
Santosh

MIRO : Avoid to show purchase order with final invoice

Similar Messages

Maybe you are looking for