MIRO by GR Line items
Hi,
Some how our system is showing MIRO by GR line items.
Means, We have a PO with single line/single account assignment
We received 5 GR's for the same PO
When doing the MIRO, there are 5 line items were displaying corresponding to 5 GR's
I know that standard system will have cumulative single line in MIRO. But, what could be reason to display in MRO by GR lines??
Your input will be greatly appreciated.
Thanks,
Dev.
Ramesh,
Excellant!!!
Regards,
Dev
Similar Messages
-
Capture Inv. Party under Details Tab of MIRO for auto line items
I am unable to get the "Inv. Party" in FBL3N for automatically generated line items. For example, the entries generated based on Tax Code is not capturing the information entered in Assignment field. The date of transaction in yyyymmdd format is being captured when FBL3N is viewed. The layout option doesn't provide "Inv. Party" to be selected though it is appearing in the Details Tab of MIRO.
I am presently maintaining the details of Vendor items from FBL1N for all transactions, get the data for a particular GL Code, say VAT credit due, then using Excel VLOOKUP to match and get the Vendor code to submit to tax authorities.
Is there any simpler way out?Hi,
go through this...
https://wiki.sdn.sap.com/wiki/display/Snippets/Displaycustomerfieldsinheaderoflogisticsinvoiceverification+transactions
Thanks,
Shailaja Ainala. -
MIRO Split out line item based on different tax amounts
Hello Friends,
We have a scenario where we get different tax rates related to the same line item quoted on the invoice which we receive from the vendor. The split out of the line item amount into different tax rates is not known at the time of booking the PO. For example, the PO line item is enter with value 1000Eur. This now shows as one line item in MIRO.
However, when the paper invoice is received fom the vendor, the 1000Eur may be split between delivery cost of 800Eur with tax rate of 10% and legal fees of 200Eur with tax rate of 5%. These tax rates are not always 10% and 5%, they can vary depending on whatever the itme on the PO is.
Is there any way in MIRO to split out the single line item into separate line items to allow us book a part of the line item with tax rate of 10% and the other part with tax rate of 5%?
Or suggestions of how to handle this scenario in SAP (apart from going backwards and altering the PO to split into 2 separate line items which is later in the process and involves alot of overhead etc)?
We tried to activate the Amount Split functionality but (1) this does not seem to allow a split out by tax code and (2) it seems limited only to the Finanl Invoice amount.
Thanks for any help.
Regards
MikNo feedback so closing
-
MIRO Invoice Posting Line Item Not Available
Dear Gurus,
I am trying to post a PO Invoice. There are 10 line items in the PO but two of them does not appear in the list of line items when trying to post the invoice by entering the PO number in MIRO.
There is no prior invoice exist in the PO so all 10 line items are open and should show up while processing the invoice.
I checked those 2 line items which do not appear and nothing seems to be unusual about them. Do you know what could be the reasons?Hi ,
Is it a GR based IV - check the same in the Po.
Secondly if yes then you will have to have GR for processing the same , in case if the same is put as a mistake then remove the tick from the Po using the T code ME22n and if there are release strategy then you will have to revoke them using the T code ME29n .
Regards ,
Dewang. -
Withholding tax amount exceeds the customer/vendor line item amt (in MIRO)
Dear Gurus,
MIGO done for 8 material line items WHT has been posted for 7 line items during MIRO. For 8th line item while doing MIRO, the above error is displayed. Kindly advise the possible reason and solution.
Thanks in advance,
SadashivanDer AVD,
Thanks for your kind response. Currently, in Central Invoice - no Central Invoice is checked.
Is it OK. For Central Inv. & 1st P.pmt. indicator, the help document says it is used in Argentina only.
We have not yet proceeded for payment stage. Still MIRO has to be completed for the MIGO done
for last line item and thereafter the payment will be done. It is right to clear the downpayment
for the 7 invoices generated now so that this error will not come during MIRO for 8th line item.
In the meantime, I will also go through the SAP notes referred by you.
Thanks and regards,
Sadashivan -
Automatic Business Area Derivation Rule for Vendor Line Item in MIRO
Hello Experts,
We trying to use Business Area concept for our client.
I have completed all configuration setting for the business are derivation like
1. Creation of Business Area
2. Assign Business area to Plant / Division (OMJ7)
3. Business area determination from sales area (TVTA)
4. Business Area by Sales Area
5. Checked Field Status Group for Customer and Vendor Reconciliation Account
It is working for for compelete sales process and in Procurement cylce it is picking business for MIGO transaction both the line items.
But
In MIRO (Purchase invoice posting) it is automatically taking Business area to the GR/IR line item and it not taking Business area for the vendor line item (automatically)
I comes know that there is a business area derivation rule for this to happen automatically.
Can you please propose the soulution for the automatic derivation of business in MIRO for vendor line item.
Regards,
ChalapathiHi,
I do mot think there is a BA derivation rule for MIRO.
The best you can do is:
1. Use a user exit or enhancement point for deriving the BA from the GR/IR line and populate that in the vendor line
or
2. You make BA as a mandatory field in the field status group for the vendor reconciliation account. This will then force the user update the BA. We use this option. This is so because at times, the vendor item may need a different business area than the GR/IR line.
Cheers. -
Populate Assignment field with PO number& Line item in while invoicing
Hi Gurus,
My client wants to populate Purchase order number concatinating with line item (4500000000 0100 )in Assignment filed of accounting doument while doing MIRO.
Thanks in Advance
Best Regards
Ashish JainHi Dominic,
I want to populate Purchase order number concatinate with line item in Assignment filed of accounting document at time of MIRO. for all line items.
Best Regards
Ashish Jain -
Withholding tax amount exceeds the customer/vendor line item amount
Hi experts
I am having one problem please help me
My user created one down payment, entry is like this
Vendor Dr-193914
To TDS 3878
To Bank 190036
After this he has booked MIRO with the same value 193914 & has deducted TDS 3878 over that invoice
Now when he is going to adjjust that down payment against that MIRO with specific line item 62
system is throwing that error.
Withholding tax amount exceeds the customer/vendor line item amount 002
Message no. 7Q321
I checked invoice booked correctly & TDS also dedcuted properly why system is throwing that error message
please help me
Regards
Nitin ShuklaHi Madhu
thanks a lot for instant reply
We are using F-54 Down Payment adjustment at this time we are facing problem & we are clearing against invoice
& with specific line item
For Eg. 5100001596 & line item - 53
Regards
Nitin Shukla -
PO short text to be copied to GL line item
Hello Experts,
When we create a PO with account assignment category u201CKu201D we update the short text field manually (TXZ01) and also GL accounts some times. Now we have a requirements where short test should be get copied in the line item when we post MIGO and MIRO to the line item of that GL account.
Can we archive this by configuration or do we need to go for a development is the question.
Br,
ShilpaDear:
By making use if substitution in FI you can copy the PO text into FI document. Please refer to OSS note 124745 . It will depict the procedural steps involved for copying TXZ01 automatically into FI document at MIGO and MIRO. Hope this will help you.
Regards -
Profit Center in Vendor Line Item (T.Code:MIRO or F-02)
Hi Friends,
We are using ECC 6 but Document Splitting is not activated.
We need Profit Center in Vendor Line Item (MIRO or F-02). How we can make this settings.
Thanks
HaraniYou can use a substitution for populating the profit center in the vendor line. You can also use the user exits.
Standard way in new GL is to use the Document Splitting featuire to populate the profit center in the vendor line based on other lines.
If you are using BADI_ACC_DOCUMENT_POST, here you can fill the profit center.
Regards,
SDNer -
Dear All,
I have facing one issue at the time posting in MIRO.
I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
Post key description amt curr.( USD)
89 Stk.RM -IMP 32100.00
96 PL.VND.RM.IMP GR/IR 32100.00
40 Purchase RM-IMP 32100.00
50 Purchase offset. 32100.00
And Miro Posting on date 23/03/2010
Post key description amt curr.( USD)
31 xyz Vendor 32100.00
86 PL.VND.RM.IMP GR/IR 32100.oo
89 Stk.RM -IMP -
40 Purchase RM-IMP -
50 Purchase offset. -
But when I post for another po in migo on date 03/01/2010
Post key description amt curr.( USD)
89 Stk.RM -IMP 76800.00
96 PL.VND.RM.IMP GR/IR 76800.00
40 Purchase RM-IMP 76800.00
50 Purchase offset. 76800.00
and miro posting on date 19/02/2010
Post key description amt curr.( USD)
32 yz Vendor 76800.00
86 PL.VND.RM.IMP GR/IR 76800.00
89 Stk.RM -IMP Line item not generated
40 Purchase RM-IMP Line item not generated
50 Purchase offset. Line item not generated
Can any one tell why line item not generated for miro posting .
Regards
MilindHi,
The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
Other wise it wont show those extra line items
Please check group currency , global currency etc. for your extra line items -
Profit Center is not getting captured in Vendor line item from MIRO.
Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi. -
MIRO - Business Area not getting updated in Vendor Line item
Hello friends,
I am posting Vendor invoice in MIRO transaction.
After Posting if i see the financial document generated,
Business area has not got updated in Vendor Line item.
What could be the problem ?
Please help me out.
Hari PrasathHi Kale,
Make sure the field Business area is not supressed in tx. OB14. for the GL account in line item 001.
On the other hand, have a look to the note and kba below:
41294 - Business area in customer/vendor item
Kba 1727802 - Business area not getting populated in sales/ purchase tax -
Profit Center Not coming in Vendor Line Item in MIRO
Hi Experts,
We are facing one problem when we are posting miro in one plant profit center is coming in vendor line item in miro. But when we are posting miro with the same material code but with different plant same company code. But in miro vendor line item profit center is not coming.
What mistakes we have done in spro.
Kindly help me out.
Regards
GRHi
Normally vendor line item will not carry profit center, hence I think this is populated through some enhancements.
Hence you may need to analyze with the help of an Abaper.
Regards -
Line Item Value change in MIRO Transaction
I have one requirement i.e as follows.
<b>Line Item Value change in MIRO Transaction</b>
After getting the items in table control of the miro screen of a particular order.
I have to clicked on edit own condition of selected item.
then it will show another screen ( create invoice document item - conditions)which have the all condtions details like
Fra1 , frb1 , sd% , Penalty % , gross price , frieght charges etc.
In this screen first time it is showing line item as
in the miro intial screen i.e. if u click po item
10 it will show 10 only.
after updating fra1 value , i came back to the main screen at that time it is asking that select the any one of three.
after selecting manual selection its fra1 was changed.
once again if i go to the same line item by clicking
the edit own condition(13 column if u select all information in textbox whixh is above tablecontrol right corner) it is showing line item as 1 in screen ( create invoice document item - conditions) which should be line item as 10. ( here i took line item as 10)
Please clarify this, why it is showing
first time as a original line item and
after updating it is showing like
for line item 10 -
1
20 -
2
100 -
10
110 -
11."...it does not work..." is probably the worst description of a problem you can imagine. As an application developer you should know that. Do you use firebug to see what happens once it "does not work"? Any better hints?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------
Maybe you are looking for
-
How to populate form data after LOV search on primary key
This is the description: Pg. 1 contains an item defined as P1_CUSTOMER_ID (Popup Key LOV (Displays description, returns key value) with the list of values definition: select last_name || ' , ' || first_name display_value, cust_num return_value from c
-
How to use Advance java function in graphical mapping in XI 2.0?
Hi, currently I am using a simple java function to make an RFC call to R3 system. I want to avoid making connection for each lookup. Instead I want to make a single connection for whole message queue and get the corresponding values in some array or
-
I can´t uninstall Itunes, quicktime, bonjour, etc. it says i don´t have permission to access the key???
-
To Yosemite or not? What will I lose vs. gain?
Okay, so I have a MacBook Pro running OX 10.7.5. I purchased the computer in mid 2009 and have since upgraded / maxed out the RAM and hard drive. I have looked everywhere to no avail for this, but is there a comprehensive list of software or functio
-
Button Highlights/Overlays in Photoshop
How do I create a simple rectangle highlight around text in Photoshop? I tried creating a rectangle with the rectangle tool. Shape Layers creates an outline (which I can create a thicker stroke), and Fill Pixels creates a rectangle with the option to