MIRO: Change the sequence of columns permanent

Hi!
It's easy to change the column sequence in miro with the mouse but ...
Is it possible to modify the sequence of columns in a screen variant (MIRO) permanently?
We're working with 4.6c.
Thanks in advance!
Best regards,
Ingo

Hi Dominic!
Thanks ... I know OLMRLIST already.
I don't find there something to change the sequence permantly.
There's the option "Take over column sequence" and it's marked.
...I want to unmark the option but i can't change it (i can't enter it... it's grey).
Any ideas?
Best regards,
Ingo

Similar Messages

  • CATS- change the sequence of columns

    Hi,
    Can we change the sequence of the columns in the time sheet the way it appears?
    Lets say.. currently, PERNR - Name - sender cost center - activity type - rec order - activity - designation.. is the sequence.
    Can we make it to
    PERNR - name - designation - sender cost center - rec order - activity type - activity
    By dragging from one column to another column in  Tcode:CAT2, it was change, but its not saved.
    Please let me know.
    Regards
    Vijay

    Hi,
    I got the solution
    Regards
    Vijay

  • Can I change the Column Name without losing data and change the sequence

    Dear Experts,
    I want to change the column name without changing the sequence and dont want lose the data.

    Oracle Version : ?
    Example Based on 10g.
    SQL> conn scott/tiger
    Connected.
    SQL> create table col1 as select * from all_objects where rownum <= 100;
    Table created.
    SQL> alter table col1  add constraints col1_pk_objid primary key(object_id);
    Table altered.
    SQL> desc col1
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    OBJECT_NAME                                        VARCHAR2(30)
    SUBOBJECT_NAME                                     VARCHAR2(30)
    OBJECT_ID                                 NOT NULL NUMBER
    DATA_OBJECT_ID                                     NUMBER
    OBJECT_TYPE                                        VARCHAR2(19)
    CREATED                                            DATE
    LAST_DDL_TIME                                      DATE
    TIMESTAMP                                          VARCHAR2(19)
    STATUS                                             VARCHAR2(7)
    TEMPORARY                                          VARCHAR2(1)
    GENERATED                                          VARCHAR2(1)
    SECONDARY                                          VARCHAR2(1)
    SQL> alter table col1 rename column object_id to object_no;
    Table altered.
    SQL> desc col1;
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    OBJECT_NAME                                        VARCHAR2(30)
    SUBOBJECT_NAME                                     VARCHAR2(30)
    OBJECT_NO                                 NOT NULL NUMBER
    DATA_OBJECT_ID                                     NUMBER
    OBJECT_TYPE                                        VARCHAR2(19)
    CREATED                                            DATE
    LAST_DDL_TIME                                      DATE
    TIMESTAMP                                          VARCHAR2(19)
    STATUS                                             VARCHAR2(7)
    TEMPORARY                                          VARCHAR2(1)
    GENERATED                                          VARCHAR2(1)
    SECONDARY                                          VARCHAR2(1)
    SQL> column column_name format a30
      1  select column_name,constraint_name
      2  from user_cons_columns
      3  where table_name = 'COL1'
      4* and owner = 'SCOTT'
    COLUMN_NAME                    CONSTRAINT_NAME
    OBJECT_NO                      COL1_PK_OBJID
    SQL>
    also go through
    http://www.dizwell.com/prod/node/65
    Message was edited by:
    user52

  • How to Change the position of Column in ALV report

    Hi Follks,
        Is is possible to change the position of column in ALV report?.If yes then how?
        Basically my requirement is, that user want afacility where , he should be able to change the position
        of column aftre he runs the report.
        Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should   
               be able to drag column 5 at position 2 and vice versa.
        Please help me, how to solve this issue.
        Note : I am using NW 7.0 SP 9
        Regards
        PG
    Edited by: PG on Apr 13, 2009 11:10 AM

    HI PG,
    do below whie filling the filed catlog
    wa_fieldcat-fieldname        = 'Field1".
    wa_fieldcat-COL_POS = '1',
    append wa_fieldcat to it_fieldcat.
    wa_fieldcat-fieldname         = 'Field2".
    wa_fieldcat-COL_POS = '2',
    wa_fieldcat-fieldname         = 'Field3".
    wa_fieldcat-COL_POS = '3',
    Thanks!

  • How can I change the type of column in matrix

    I want to change the type of column in matrix to it_LINKED_BUTTON, so it can show the orange arrow
    I added the column throw marketing documents (rows)
    It's seems the default column type  is it_Edit
    is there a way of changing the column type
    i tried the below code, but it did not work because the type property in a matrix column is readonly
    mtx.Columns.Item(0).Type = SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON
    sincerely yours
    Riade Asleh

    i don't want to add a new column
    i want to change the column type of existing column in matrix, becuase it's bind to a field
    beside that, i can not add column , if the matrix has rows in it
    sincerely yours
    Riade Asleh

  • Change the order of columns in a report

    hi all.
    i can't change the order of columns in a report not just by altering the select statement. where can i change it?
    thanks.

    hi master
    sir i use 6i report i see full report but i culd not found
    report region and report attributes
    sir please give me step or idea or tree where report region and report attrinutes"
    thanking you
    aamir

  • How to change the "name of column" property of an text item in runtime?

    How to change the "name of column" property of an text item in runtime?
    I look the properties of items in help and found nothing about this!
    It's possible?

    Hi,
    an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
    First create block and add items
    The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
    Set into items the column name property to col1 , col2 ...
    At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
    in this way you can change the source of column value.
    Caution because if you change value type from varchar2 to date you must cast date into varchar2.
    May be that this way is valid only for view data not for insert-update, i don't remember.
    bye
    Message was edited by:
    Killernero

  • How do I change the order of columns in the responses table?

    How do i change the order of columns in the responses table in FormsCentral?  The default setting puts them in reverse order!

    Hi,
    The issue with the default ordering of columns in the response table is something that we hope to address in the next update to FormsCentral. In the meantime, you can reorder the columns by selecting them then click/drag using the gray area above the column name. As shown below, an orange marker will show you where the columns will be placed when you release the mouse button.
    Sorry for the inconvenience.
    Regards,
    Brian

  • How do I change the sequence of fields in DT?

    Hello,
    How do I change the sequence of the  fileds DT in such a way that the MM (already done) will not be disturbed?
    Thanks
    Nikhil.

    I could figure it out
    you can actually do it by right clicking on the field , cut and insert
    thanks anyways,

  • How do i change the number of columns within a text box?  I need to go from three columns to one.

    How do I change the number of columns within a text box?  I need to go from 3 columns to 1.  The insert column is highlighted and column break does not work for this.

    Pages '09 does not seem to allow layout breaks in Textboxes.
    Pages 5.2 has the same limitation.
    Use multiple linked Textboxes in Pages '09 to get the layout you want or create your layout in a Word Processing template in the document layer.
    Peter

  • How do I change the width of column "rating"

    all columns are variable in widht. but not "rating" (stars). How do I change the width of column "rating"?

    Hi Emkaha,
    By the way the column "last played" can be reduced to a size which display the date "incorrect" as well (you'll see only the first number of the date which wouldn't make any sense too, but it is possible).
    True, but if you see date of "1" you will know you are not seeing a full date.  If you see 2 stars, it is a valid value, even if it is not correct.  At least, that is my supposition about why it is designed the way it is.
    Having said that, the extra width in the German version -- the Wertung column is wider than needed for 5 stars -- does seem odd.  In the English version for Windows PC, the Rating width is just enough for 5 stars.  You can report this to Apple via the iTunes Feedback page.

  • IPhoto is changing the sequence of the photos I have in my file for the book I want to create. Help?

    iPhoto is changing the sequence of the photos I have in my file for the book I want to create. Help?

    The problem has been solved. As it turns out, I was highlighting the photos in the album I wished to create. And then generating the request for a book. This caused the photo images when loaded into the book format to revert to the sequence used when I originally loaded them into the album. Not the edited sequence. Turns out that I did not need to highlight the photos. By eliminating this step, they remained in the edited sequence.
    Thank you for responding. Warmly, Janice huseby

  • Can you programmatically change the width of columns in a table control\indicator

    Is it possible to programmatically change the width of columns in a table control\indicator ie to fit to width of the data or in my case the header information.

    Create a property node (or reference) and use the 'Active Cell' property to select which column you want to change and then use the 'Cell size'--> 'Width' property to change the size.
    "There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
    Attachments:
    table.vi ‏33 KB

  • How to change the name of column in ActionScript?

    I possibly know how to change the name of the column in DataGrid using mxml but dont know how  to change the name of column in  DataGrid using  ActionScript.
    var newDataGrid:DataGrid=new DataGrid();
         newDataGrid.dataProvider=arrayCollection():
    It takes the default names from arraycollection but I wanted to give any column names which I want through ActionScript.
    Please HELP!

    Give your datacolumn and id.  Then set the property for that column through the datacolumn id.
    DataGridColumn id="nameDC"
    Script:
    nameDC.headerText = "Name";

  • How can i change the sequence of text element in standard driver program ?

    Hi,
    can u tell me how can i change the sequence of text element in standard  sapscript driver program.. without making a zcopy of standard driver program.
    My problem is when MEDRUCK form is getting printed for PO print , header text is coming before item. But the requirement is to come it after item.So how cani do that without making the zcopy of  SAPLMEDRUCK program..Is there any enhancement point in SAPLMEDRUCK driver program..where i can put my customise code for changing the sequence of text element ?

    Hi,
        Just copy the MEDRUCK to ZMEDRUCK. No need to copy the driver program.
    1) SE71Menu > Utilities > COpy from Client
    MEDRUCK ->>Client 000
    New formname ZMEDRUCK
    2) Now open the ZMEDRUCK in DE language in SE71
    3) Menu > Utilities > Convert original Language
    Change DE  to EN, save and activate
    4) Now open the ZMEDRUCK in EN language
    5) Goto Pagewindows > Main window,
    Look for the HEADER text Text element, copy the whole code under this Text element just after the ITEM text Text element, and comment the HEADER text above.
    Now the Header text Text element will be below ITEM text only. This will full fill your requirment.
    Now goto NACE transaction and add the copied ZMEDRUCK to the EF application.
    Regards
    Bala Krishna

Maybe you are looking for

  • ITunes Freezing MacBook Pro

    For the third time now my MacBook Pro has frozen while using iTunes - downloading app updates. I can't reboot the computer. I am having to restore the computer using a Time Machine backup. iTunes version 11.1.2, Mac OS X 10.9. Retina MBP 15-inch, Ear

  • PDF with Hyperlink dead in mail

    Hello! I have a PDF with a Hyperlink (url). I want to send it with the Mail Application to my friends, so they can click right into the link in the PDF. It doesn't work. Any solving answers? Thanks a lot! Dani, Switzerland Dual G5   Mac OS X (10.4.8)

  • Imported jpg probs - Urgent

    Before I begin, I'd like to apologize in advance if this issue has already been addressed in these forums.. I'd be suprised if it hasn't, but i've looked all over, and cannot find the answer i'm looking for. I'm using FlashMX 2004 Pro, on XP Pro SP2.

  • Emac randomly freezing

    The computer that my sisters use is my former emac. They have been complaining lately that it has been randomly freezing after around 10 or 15 minutes of use. I tried it out and found the same thing. I really have no idea what is causing this so I fi

  • Replacement for Aperture

    I am currently uploading (scan) thousands of old 35mm slides to my iMac, after which I am editing MANY of the uploads because of many reasons, e.g., scratches, faded, etc. I am currently using Aperture but know now that Apple will no longer update th