MIRO for freight: freight clearing account not getting debited

All SAP Gurus,
We are doing MIRO for planned delivery cost (freight) and facing some problem in account determination.
Actually the ideal cycle goes like this:
The stock account is debited with the planned delivery costs at goods receipt and the system makes the offsetting posting to a freight clearing account. This posting is then cleared by an offsetting entry to the vendor account at invoice receipt.
In our case accounting entries are going correct at the time of GR.
But at the time of MIRO insted of freight clearing account, stock account is again getting debited.
Where may be the problem?
Please help.
Regards,

Hi
Check what are the debit and credit accounts for Freight transaction key in OBYC (check corresponding account key for freight condition in pricing procedure). If you maintain them correctly (generally we only maintain one GL account without specifying debit/credit in OBYC), then entry should be GR/IR freight clearing account debit at time of MIRO.
Check the accounting entry in MIRO - the posting keys you are seeing (when you scroll to right hand side in accounting document you can see transaction).
Thanks

Similar Messages

GR/IR clearing account not getting cleard

HI Experts,
When I am trying to clear the GR/IR clearing account it is giving the message as Difference is too large for clearing.
Actually here the balance is less 1 Rs. For purpose I have defined the clearing differences upto 10 Rs in Transaction code OBA0.
Here I have mentioned the tolerance group and the same is assigned in the GR/IR clearing account.
Secondly I have defined the clearing rules as clearing based on purchsing doc (EBELN) and item (EBELP).
Even though I am getting the same error as Difference is too large.
Can any one please guide the right process
Thanks and Regards,
Ram

Hi,
Tolerance Group is defined at different levels.. 1) For the GL 2) At the employees level.. Therefore, no matter what you maintain at the GL level.. if the tolerance at the Employees level is less than what you have maintained at the GL level.. the Employees level will take precedence. So check the tolerance limit at the Employees level and probably you will get answer for the error.
Regards,
SAPFICO

Return Purchase Orders- CESS ACCOUNT NOT GET Debited in MIGO

Dear Expert,
We are implementing Return PO procedure for Materials.
Business scenario :
Goods received from vendor during Material receipt Stock Account debited and GR/IR Clearing account Credited and Cess account Credited further during Invoice Posting Material Vendor is Credited with debiting GR/IR Clearing account and Cess Vendor is get Credited by debiting CESS account
In Case of Return Purchase Order we are sending Materials back to Vendor during Goods Issue to Vendor Stock Account Credited and GR/IR Clearing account debited but Cess account get Credited insted of debited,
Please advice what setting can be done to debit CESS Account during goods return
Regards,

Hi
Thanks for reply, vendor has to pay duty to govt if vendor is not belong to factory location
during GR for outside vendors pay duty to govt but naw we want to return materials to vendor at this time we also want to recover duty paid to govt.
to make this possible we have Created vendor code for Govt creditor and condition is created with feature of delivery cost
goods are return to vendor by creating Return PO ( as no reference document available ) and goods issue with movment type 161.
Pls advice

Vendor Account not getting credited

Dear Gurus,
After doing MIRO, my GR/IR clearing account is getting debited, but my vendor account is not. Instead the account Gain-IR small diffs is getting credited. Where is the setting to change this, so that my vendor account gets credited.
Regards
Prashant

HI
Inorder to check whether your vendor account is getting credited or not go to Transaction OBYC
and check the debit transaction KBS ,
and then check the posting key 81 for debit and 91 for credit is maiintained or not .
this will give the GL account that is being credited to go to transaction FD10 to checj the vendor balance.
hope this hellps.
regards
Vignesh

Planned Delivery Cost in MIRO for different freight vendor

Hi,
Kindly share, how to get rid of above issue:
1) PO created with a freight condition (FRA1 with a different vendor assigned to it under item conditions tab)
2) GR done, & all accounting entries were OK, (including freight costs in FR1 or FR3)
3) while doing MIRO with selection Planned-Delivery-Cost, Amount & Qty fields are "Blank" and auto flowing from Clearing A/cs
I found this error in both Domestic or Import POs.
I've read many threads, but could not find a clear solutions for the same.
Plz help
Sankar

Hi,
Plz find screens.
Amount & Qty fields not flowing in MIRO from open GRIR/clearing account balance.

I have two monthly scheduled iTunes allowances scheduled for my kids. For some reason they did not get transferred to their accounts this month.

I have two monthly scheduled iTunes allowances scheduled for my kids. For some reason they did not get transferred to their accounts this month.

@Dakotaep
I am so sorry to hear of your experience with purchasing your new Samsung Galaxy Note 3! This definitely should have been resolved in your first call to us. I would be glad to review your account and ensure the Edge Agreement is corrected. Please accept my "Follow" request and send me a direct message so I can further assist. Thanks!
AnthonyTa_VZW
Follow us on Twitter VZWSupport on Twitter.

Unable to view entries in FAGLL03 for Zero Balance Clearing Account

Hi experts,
We are facing a unique problem. We are not able to view the line items of the Zero Balance clearing account. The master data of the G/L has been activated for line items but still the display of the items is not happening. I am getting the foll message:
Account 19900000, company code 1100 is clearing account
Message no. MSITEM111
Diagnosis
You have stored account 19900000 in company code 1100 as a clearing account. At the same time, you use line item management with this account.
System Response
Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected.
Procedure
Check the Customizing settings or account control. Change the settings so that only automatic postings without line items can be made to the account, or select a different account as the clearing account.
Regards,
Sateesh

Hi
In splitting case you need not the give the line item display tab for Zero Balance Clearing Account.
Just remove that line item display in FS00 for Zero Balance account. You could be able to see the entries in FAGLL03
Regards
Sandeep

I brought iphone 6 for my brother but its not getting start

i brought iphone 6 for my brother but its not getting start

Howdy satyafrommumbai,
Thanks for using the Apple Support Communities.
It's not clear what the issue is with the iPhone, but if it is unresponsive, then take a look at the troubleshooting in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Have a great weekend,
Alex H.

Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online ??? any one else having troble?? please help I need my mail

Hello. Please help. for unknow reasons, I am not getting any of my mail on anything, nothing on my iphone, my outlook or even when I log into icloud online>???
any one else having troble??
please help
I need my mail

Hello, DragonStudios.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting resources I would recommend when experiencing issues with iCloud Mail.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
iCloud: Account troubleshooting
http://support.apple.com/kb/TS3988
Cheers,
Jason H.

HT204053 I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

I am having trouble setting up icloud on MAC. In system preference it is listed as mobile me, it asks for member name and password. It also has a learn more button under "try mobileme for free". I am not getting anywhere

It's evident that you are using Snow Leopard or earlier (or very early Lion) since you have the now obsolete MobileMe preference pane.
The minimum requirement for iCloud is Lion 10.7.5 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table
If you are running Leopard on an Intel Mac you will have to upgrade to Snow Leopard to access the Mac App Store - it's available in the online Apple Store. However if you have a PPC Mac you cannot run Snow Leopard and cannot proceed further.

Movement Type 261 - Different G/L account to get debited for same Movement

Hi Friends,
I need your help to solve the following issue
We are in the process of implementing ECC 6.00. One of our client requirement is for Movement type 261 , different consumption account to get debited for different types of issues. i.e. incase of MT 261 issue for maintenance order the consumption account should hit to Maintenance G/L and incase of MT 261 issue for production order different consumption account to get debited.
I think One way to meet this requirement is by creating new Movement type by copying MT261 and assigning new Account Grouping to that MT and assigning GL in GBB against the new account grouping.
I would like to know is there any other way to meet this requirement in SAP.
Request you earliest advise on this issue as we are in the stage of final integration test
Thanks
Deva

Dear
If the solution works fine please do let me know in detail as we have the same requirement.
Thanks and Regards
JS

My apple ID has stolen i asked for rest but i could not get email rest on my email.

my apple ID has stolen i asked for rest but i could not get email rest on my email.
<Email Edited by Host>

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

How to ensure for material POs, TDS does not get deducted.

Dear Seniors,
Single vendor is supplying material and doing some service also. How do we ensure that for material POs, TDS does not get deducted.
Regards
KVKR

Hi kkvr,
As i see your requirement is to execute MRRL alongwith the performing a proper TDS deduction and also using single vendor.
There is no Standard SAP solution for this, as a workaround you will have two options for doing the same
Option 1 : Create a different vendor code then you can run mrrl for the vendor code one for service and another for material
The demerits of this solution is duplication of vendor code, which results in not having proper information for the SCM personnel for the purpose of vendor evaluation and vendor reconcilation
Option2:
you need to enahce the Purchase order at line item level with the a custom fields for the WHT tax code to be selected at the time of PO creation. For this you need to do a screen enahcement in PO and also at the time of providing the popup for selection it should only dipslay the wht codes available in the vendor master so that proper control on the tax code selection will happen.
The practical issues here is the po creation person should have the knowledge of the tds code which you need to see whether it is possible or not or you can also suggest that finance controller should be part of po release startegy to check these po's to ensure the correct tds code populated.
Further to this you need to also perform additional enahcement changes for the selected tds codes in the po it should be replaced at the time of mrrl transaction making other tds tax codes base as 0 or removal of tds codes not applicable in the exit.
This exit with the help of the abaper you will be able to find hte standard enhacements available for mrrl and code the same over there so that at the time of posting this will happen.
Further, to this while writing the logic you can also further stream line it as for material po's the tds not to be deducted at all so that user input for the material po's can be avoided and it is required only for service po's this disticntion you can do with the item category.
With this you can perform the enahncement with a minimal changement to achieve your purpose.
Do let me know if you have any quereies,
Regards,
Bharathi

HT1349 after installing iso 5.1 verision for my iphone 4 its not getting activated

after installing iso 5.1 version for my iphone 4 its not getting activated

iOS 5.1 is currently in beta and its a developer only release. Discussing more details to this isn't really permitted on the public forums.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap"

MIRO for freight: freight clearing account not getting debited

Similar Messages

Maybe you are looking for