MIRO for subcontracting

Hello friends,
We have as scenario as follows.
In a subcontracting PO, 20 kg of FG is ordered against supply of 22 kg of raw material & 2 kg of scrap which gets generated in process. Now GR is done for 20 kg of finished goods & 2 kg of scrap. In MIRO system picks up the GR quantity & Price for finished goods which is 20 kg. But actually vendor has processed 22 kg of material & he has charged accordingly. How to capture processing charge for 22 Kg. of raw material in MIRO? One way out seems to be changing the value in MIRO. Is there any other way to overcome this?
Thanks in advance
Sandeep

Service Charges are apply on finished goods not on raw material issued to Subcontractor. You should ask your subcontractor to quote a charges for making a ctn or 1 Kg finsihed good. In this case either raw material issued extra or below the service charges remains same.
Regarding your query it is not standard practice to trigger service charges on issued material.
If it helps, kindly give points.
Regards,
RM

Similar Messages

Standard Cost Estimate for Subcontracting

Dear Sir / Madam,
We are in the process of migrating from our normal R/3 operations for Production Planning to Execution inclusive of Costing of materials by using iPPE functionality for repetitive scenario. We have our BOMs for painted body currently in R/3. The painted body falls under subcontracting scenario.
In this scenario the body in white produced from our bodyshop is sent out to the subcontractor along with certain paint items and is received as painted body and consumption of the body in white and the paint items sent needs to be shown during the goods receipt of painted body.
For this we have maintained the BOM for the painted body in iPPE. Also in the costing variant "ZD01" in order to arrive at Standard cost (CK11N) for the painted body we have maintained the following settings for Valuation variant for subcontracting :
Priority     Strategy Sequence
1          Net Quotation Price
2          Effective Price from Purchase Order
While running CK11N for the material (painted body) we are receiving the following message
Message no. 28501 : Error in dependency processing: condition 0000062388 is empty
We wanted to verify whether the message raised is normal or would it have any adverse impact.
Your assistance would be highly appreciated.
Regards,
Bhavika
Edited by: Bhavika Goyal on Feb 7, 2009 12:20 PM

Dear All,
Control Key is important for inhouse producrtion and Sub Contract. Check it once and when ever u have given the Product (semi fisished) to Sub Contractor, along with Paint.
Here one thing is important what is your process? how much portionis involced in Sub contracting. why because
Paint issue to the sub con is captured by the way for migo or miro
Payment to sub contract is capture all the cost of the Sub Con., then is there any cost is missed for this process. Let me know the remain things?
thanqu
raj

Clearing of Change in Stock Account at the time of GR for Subcontracting

Dear,
We have created a PO with Item Category "L" for subcontracting.
At the time or GR system has posted below accounting entries:
GR/IR clearing account 500 -
External service account 500 +
Stock account: end product 950 +
Change involving stocks 950 -
Stock account: comp. 450 - (components cost)
Consumption account 450 +
I want to know how to clear Change in Stock Account.
Please advise.
Regards,
Vivek

Hi:
        As per my understanding this happens when MIGO is done in case of a subcontracting PO
Stock-CS/RM                                     Dr
GR/IR Clear RM/PM/CS                             Cr
Inventory Change Sub-Cont RM     Dr
Ext Serv Sub-Cont                             Dr
Stock-CS/RM                                             Cr
Sub-Cont Cons RM                             Dr
Upon MIRO
Ext Serv Sub-Cont                             Cr
GR/IR Clear RM/PM/CS             Dr
Inv Change Sub-Cont RM     Dr
Vendor                                            Cr
Duties                                      Dr
Stock-CS/RM                                   Cr
Hence Inventory change account is cleared as soon as MIRO is done. Hope it will clear your understadning
Regards

MIRO (About Subcontract PO return)

Hi,
I've got a problem about subcontract PO return, the scenario is as follows...
We received 100PCS products for a subcontract PO in May, and till someday next month, we returned 10 PCS with MT122. (Although we provided material and the supplier just processed it for us, but sometime we had to return scraped products due to some special reasons in our cases)
Our subcontract supplier would issue an invoice by the end of every month, e.g. when we received the 100PCS invoce, the 10 PCS had been returned.
Now the situation emerged...
When we tried to do MIRO for the subcontract PO, the balance was 90PCS, while the invoice was 100PCS.
We can't create a return PO for a subcontract PO as it's prohibited by SAP...
I consider it's a normal situation in every company, so would you please give me any advice to solve this problem? Thanks in advance...

Dear,
If supplier sends 100 quantities, 10 quantities is return to vendor.
So your question is that how to manage it in supplier invoice.
First step for it, Create return purchase order with tick of return check box available in item level of purchase order.
Than create material document for this return purchase order.
Now for Supplier invoice.
You can create Invoice verification for 90 quantity and full amount(100 quantity amount) - MIRO
Than create Credit memo with 10 quantity and amount of 10 quantity.
NOTE: - For Return delivery you have not prepaid invoice verification.
Because if material is return so why you pay amount of invoice verification.
Regards,
Mahesh.

Cofiguration step for SubContracting Order Cycle (SCO)

Pls,provide me the the configuration steps of SCO(Suncontracting Order Cycle)

Sub Contracting Cycle
(1) You have a material that can be procured externally, and you have maintained BOM with components. Any waste generated and received during subcontracting process can be maintained as component with negative quantity. (special procurement type should be 30 in material MRP2 view for the mateiral you are getting back from subcontractor)
(2) You create a subcontracting PO (PO with Item Category L). You can also maintain Purchase Info Record for Subcontract category for material and subcontractor.
(3) You make a transfer posting to issue components for SC PO. Material is sent to subcontractor. As material remains under your ownership, system does not make any value entry. But quantity is shown as "Material Provided to Vendor"
(4) You receive finished material against SC-PO. You also specify components consumed in manufacturing of finished goods. Additionally, if you have negative components in BOM, now you'll also receive subcontracting by-products. There are three events, so three accounting entries are generated:
DR FG Stock/ SC By-Product Stock
CR Change in Stock (FG/ SC By-Product )
(for finished goods received)
DR Subcontracting Charges
CR GR/IR Clg
(for moneys payable to Subcontractor)
DR Consumption (Components)
CR Change in Stock (FG/ SC By-Product ) 0
(material provided to Vendor is now charged to expense)
(5) You do the IV for SC Invoice, and the process is complete.
Process of Subcontract in MM
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Note:: At the Time of GR 543 Mvt is up dated for Raw Material.
Can anybody tell me how a process has to be given to subcontracting?
Suppose, I have 3 operations 1)weaving 2)dyeing 3)cutting & packing
if no 2 process (i.e Dyeing) has to be given to subcontracting, what process should i follow ?
The following process to be followed for subcontracting.
1. Item code(material master) to be created at the stage of before dyeing.
2. Item code(material master) to be created after Dyeing as subcontracted item.(F30)
3. Bill of material to be created for the material(2) calling for material(1)
4. Info record and source list to be created for material(2) with the corresponding vendor
5. PO to be released for material (2)
6.Along with PO the material(1) to be issued to vendor
7.On receipt of material when GR is made the stock with vendor will get updated.
How to Create a Subcontract Order?
To create a subcontract order, proceed as follows:
Enter the material you want to order and the item category for subcontracting (L) in the order item.
Press ENTER to display the screen for component processing.
Enter the components that the vendor requires to manufacture the product.
Please note:
u2013 You do not need to enter the date required for the components. This date is proposed by the system when you press ENTER.
It is calculated as follows:
Delivery date of the item - Planned delivery time
u2013 If you do not want the quantity of the components to be changed if the order quantity of the end product is altered, set the indicator Fixed quantity (column F).
u2013 You can determine whether the components are available on the date required by selecting Edit -> Availability check.
If you entered a bill of material as the material in the subcontract order, the components are created automatically.
If you want to determine the components in the bill of material at a later date (for example, if the bill of material is subsequently changed), choose Item -> Component -> New BOM explosion. The existing components are deleted and redetermined in the bill of material.
Save the purchase order.

Return ROH component for Subcontracting

Hi All,
Can anyone please guide me for the process of return Raw Material Components for Subcontracting, after the Goods Receipt of Finished Goods using MIGO.
I have searched other threads which are using transactions J1IF01, J1IFQ and J1IF13. Does anybody knows what the use for these transactions.
Below is the current flow which I am using
Create Subcontract Purchase Requisition - ME51N (item Category L)
Create Subcontract Purchase Order - ME21N (Item Category L)
Create Transfer Posting - ME2O
Create Goods Receipt Document - MIGO
Create Logistic Invoice Verification - MIRO.
Thanks.

Hi
Actually use for subcontract adjustment we have to use t-Code MB04 enter the Delivery note number and PO number through which PO you are going to issue or receiving. Then select the component which component you are going to issue or receive .
If you are going to receive the material from vendor means just enter the quantity for example 10 then post it it will reduce the stock of subcontractor
If you are going to Issue the material to vendor means just enter the quantity for example -10 with negative then post it it will increase the stock of subcontractor .
Hope it will help you
Regards
Murugan

Components are not getting consumed at the time of GRN for Subcontracting P

Dear All,
I hav created a Subcontracting PO and transfered the componenets
At the time of GRN for Finished Product, consumption of componets are not happening and GRN is getting posted
Please help me

Hello,
Have you created the subcontracting Purchase order or not? check , Item category "L" was available in Purchase order not?
I mean you are not getting the 543 movement type in MIGO transaction.
Follow below steps for subcontracting
Sub-contract business process:
You want to buy material from the supplier (processed material/ assembled item) , but for some reason (quality of certain item / price ) you will give some component to vendor .
Vendor shall process the item / use the item provided & supply the final item.
SAP process:
1.Create the finished goods material code.
2.Maintain the BOM for the material.
3.Create PO with item category as "L" .
4.Issue material to vendor with movement type 541
5.Receive the material against the PO with movement type 101.
6.MIRO to account for vendor's invoice for the service charge& material used by him.
Please check these steps are their in your PO or not?
Regards
Mahesh Naik.

REPORT FOR SUBCONTRACTING

DEAR FRIENDS,
I am making a program for tracking the materials given (mb1b 541 movt.) for subcontracting and taken by me (101 for actual good receipt, 543 for the given material- stock type inward, 545 for the scrap returns). but while i made the program i am unable to pick up the materials BOM from the PO which is essential to take the difference between these and the supplied quantities taken-in by GR.
following is the program.
Please suggest the changes.   Thanks,
Deepak
*& Report ZMM_SUBCONTRACTING_PO_REPORT
*& Author:
*& Date :
*& Reason: Sub Contracting PO Report.
*&         Find Discreprancy in PO and BOM. according to 543 and 545
REPORT ZMM_SUBCONTRACTING_PO_REPORT NO STANDARD PAGE HEADING
                                     LINE-SIZE 157.
*& TABLES DECLARATION
TABLES: EKKO,
        EKPO,
        EKBE,
        ENT5303.
*& SELECTION-SCREEN.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_MATNR FOR EKPO-MATNR,
                S_WERKS FOR EKBE-WERKS OBLIGATORY.
PARAMETERS:     P_BUKRS LIKE EKKO-BUKRS OBLIGATORY.
SELECT-OPTIONS: S_BUDAT FOR EKBE-BUDAT OBLIGATORY,
                S_EBELN FOR EKKO-EBELN,
                S_BELNR FOR EKBE-BELNR,
                S_GJAHR FOR EKBE-GJAHR.
SELECTION-SCREEN: END OF BLOCK B1.
*& INTERNAL TABLES DECLARATION.
DATA: BEGIN OF IT_EKKO OCCURS 0,
      EBELN LIKE EKKO-EBELN,
      END OF IT_EKKO.
DATA: BEGIN OF IT_EKBE OCCURS 0,
      EBELN LIKE EKBE-EBELN,
      EBELP LIKE EKBE-EBELP,
      GJAHR LIKE EKBE-GJAHR,
      BELNR LIKE EKBE-BELNR,
      BUZEI LIKE EKBE-BUZEI,
      BEWTP LIKE EKBE-BEWTP,
      BWART LIKE EKBE-BWART,
      BUDAT LIKE EKBE-BUDAT,
      MENGE LIKE EKBE-MENGE,
      DMBTR LIKE EKBE-DMBTR,
      LFBNR LIKE EKBE-LFBNR,
      MATNR LIKE EKBE-MATNR,
      WERKS LIKE EKBE-WERKS,
      BUKRS LIKE WB2_V_EKKO_EKPO2-BUKRS,
      MENGE_I LIKE WB2_V_EKKO_EKPO2-MENGE_I,
      LIFNR LIKE WB2_V_EKKO_EKPO2-LIFNR,
      COUNT TYPE P DECIMALS 4,
      BMENGE LIKE EKBE-MENGE,
      MENGE101 LIKE EKBE-MENGE,
      MENGE543 LIKE EKBE-MENGE,
      MENGE545 LIKE EKBE-MENGE,
      DIFFER   LIKE EKBE-MENGE,
      TMENGE   LIKE EKBE-MENGE,
      RATE     LIKE EKBE-DMBTR,
      NAME1 LIKE LFA1-NAME1,
      LINE_COLOR(4),
      END OF IT_EKBE.
DATA: WA LIKE IT_EKBE.
DATA: BEGIN OF IT_FINAL OCCURS 0.
      INCLUDE STRUCTURE IT_EKBE.
DATA: END OF IT_FINAL.
DATA: BEGIN OF IT_FINAL_TEMP OCCURS 0.
      INCLUDE STRUCTURE IT_EKBE.
DATA: END OF IT_FINAL_TEMP.
DATA: BEGIN OF IT_BOM OCCURS 0.
      INCLUDE STRUCTURE CAPP_ITM.
DATA: END OF IT_BOM.
DATA: BEGIN OF IT_BOM_HEAD OCCURS 0.
      INCLUDE STRUCTURE CAPP_BOM.
DATA: END OF IT_BOM_HEAD.
*& DATA DECLARATION.
DATA: COUNT TYPE P DECIMALS 4,
      V_CNT TYPE P DECIMALS 4 VALUE '0.0001' ,
      V_MENGE LIKE EKBE-MENGE,
      V_DELETE.
TYPE-POOLS: slis.
DATA: l_date(12) TYPE c,
       l_date1(12) TYPE c,
       l_time(10) TYPE c,
       l_list(60) TYPE c.
DATA: CATALOG TYPE SLIS_FIELDCAT_ALV, "FIELDCAT
       TCATALOG TYPE SLIS_T_FIELDCAT_ALV, "IT FIELDCAT
       EVENT TYPE SLIS_ALV_EVENT, "EVENT
       TEVENT TYPE SLIS_T_EVENT, "IT EVENT
       LAYOUT TYPE SLIS_LAYOUT_ALV, "LAYOUT
       PG_TOP TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
       PG_HEAD TYPE SLIS_T_LISTHEADER,
       EXIT1 TYPE SLIS_EXIT_BY_USER,
       VAR1 LIKE DISVARIANT,
       VAR2 LIKE DISVARIANT.
*& START-OF-SELECTION.
START-OF-SELECTION.
PERFORM PROCESS_SELECTION.
PERFORM DELETE_CANCELLED_DOCUMENTS.
PERFORM EXPLODE_BOM_FOR_101.
SORT IT_FINAL BY COUNT.
PERFORM DISPLAY_OUTPUT.
FREE IT_FINAL_TEMP.
*& ALV FORMATTING
*&                  ALV DISPLAY
PERFORM GENERATE_ALV_FIELDCAT.
PERFORM EVENTS USING TEVENT.
PERFORM TEXT USING PG_HEAD.
PERFORM ALV_SHOW.
*& FORM PROCESS_SELECTION.
FORM PROCESS_SELECTION.
SELECT
A~EBELN
A~EBELP
A~GJAHR
A~BELNR
A~BUZEI
A~BEWTP
A~BWART
A~BUDAT
A~MENGE
A~DMBTR
A~LFBNR
A~MATNR
A~WERKS
B~BUKRS
B~MENGE_I
B~LIFNR
FROM
EKBE AS A
JOIN
WB2_V_EKKO_EKPO2 AS B
ON
AEBELN = BEBELN AND
AEBELP = BEBELP_I
INTO
CORRESPONDING FIELDS OF TABLE IT_EKBE
WHERE
A~MATNR IN S_MATNR AND
A~WERKS IN S_WERKS AND
A~BUDAT IN S_BUDAT AND
A~EBELN IN S_EBELN AND
A~BELNR IN S_BELNR AND
A~GJAHR IN S_GJAHR AND
A~VGABE IN ('1', '7') AND
A~BEWTP IN ('E', 'O') AND
( A~BWART IN ('101', '545', '543') OR
( ABWART = '102' AND ABEWTP = 'E' ) ) AND
B~BUKRS = P_BUKRS AND
B~BSTYP = 'F' AND
B~BSART = 'SUBC'."AND
B~LOEKZ <> 'X'.
SORT IT_EKBE BY EBELN EBELP GJAHR BELNR BUZEI.
ENDFORM.
*& FORM DELETE_CANCELLED_DOCUMENTS.
FORM DELETE_CANCELLED_DOCUMENTS.
DELETE IT_EKBE WHERE BWART = '102' AND BEWTP <> 'E'.
LOOP AT IT_EKBE WHERE BWART = '102'.
READ TABLE IT_EKBE INTO WA WITH KEY BELNR = IT_EKBE-LFBNR.
IF SY-SUBRC = 0.
    DELETE IT_EKBE WHERE BELNR = WA-BELNR.
ENDIF.
ENDLOOP.
CLEAR WA.
DELETE IT_EKBE WHERE BWART = '102'.
ENDFORM.
*& FORM EXPLODE_BOM_FOR_101.
FORM EXPLODE_BOM_FOR_101.
CLEAR COUNT.
LOOP AT IT_EKBE WHERE BWART = '101' OR
                      BWART = '543'.
IF NOT IT_EKBE-MATNR IN S_MATNR.
V_DELETE = 'X'.
ELSE.
CLEAR V_DELETE.
ENDIF.
IF V_DELETE <> 'X'.
COUNT = COUNT + 1.
IT_EKBE-COUNT = COUNT.
V_MENGE = IT_EKBE-MENGE.
MODIFY IT_EKBE.
IT_FINAL = IT_EKBE.
APPEND IT_FINAL.
ENDIF.
call function 'CABM_READ_BOM'
    exporting
      I_MATNR               = IT_EKBE-MATNR
      I_WERKS               = IT_EKBE-WERKS
      I_STLAL               = '01'
      I_STLAN               = '3'
      I_DATUV               = IT_EKBE-BUDAT
    TABLES
      EXP_BOM_DATA          = IT_BOM_HEAD
      EXP_ITM_DATA          = IT_BOM
   EXCEPTIONS
     NO_RECORD_FOUND       = 1
     OTHERS                = 2
if SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
          WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
*START RK 18.06.2007
DELETE IT_BOM WHERE DATUV > IT_EKBE-BUDAT.
END : 18.06.2007
    IF V_DELETE = 'X'.
      LOOP AT IT_BOM.
        DELETE IT_EKBE WHERE MATNR = IT_BOM-IDNRK.
      ENDLOOP.
      REFRESH IT_BOM.
    ELSE.
      PERFORM CHECK_BOM_GR.
    ENDIF.
endif.
ENDLOOP.
FREE IT_EKBE.
ENDFORM.
*& FORM CHECK_BOM_GR.
FORM CHECK_BOM_GR.
DATA: WACNT TYPE P DECIMALS 4.
WACNT = COUNT.
LOOP AT IT_BOM.
READ TABLE IT_EKBE INTO WA WITH KEY EBELN = IT_EKBE-EBELN
                                      MATNR = IT_BOM-IDNRK.
IF SY-SUBRC = 0.
    WACNT = WACNT + V_CNT.
    WA-COUNT = WACNT.
    WA-BMENGE = IT_BOM-MENGE.
    WA-TMENGE = V_MENGE.
    APPEND WA TO IT_FINAL.
    DELETE IT_EKBE WHERE EBELN = WA-EBELN AND
                         EBELP = WA-EBELP AND
                         MATNR = WA-MATNR AND
                         BELNR = WA-BELNR AND
                         BUZEI = WA-BUZEI.
**START : ADDED BY .... KUMAR ON 14.06.2007
ELSE.
    WACNT = WACNT + V_CNT.
    WA-COUNT = WACNT.
    WA-BMENGE = IT_BOM-MENGE.
    WA-MATNR = IT_BOM-IDNRK.
    WA-TMENGE = V_MENGE.
    APPEND WA TO IT_FINAL.
**END ADDED BY .... KUMAR ON 14.06.2007
ENDIF.
CLEAR WA.
ENDLOOP.
REFRESH IT_BOM.
ENDFORM.
*& FORM DISPLAY_OUTPUT.
FORM DISPLAY_OUTPUT.
Populate color variable with colour properties
Char 1 = C (This is a color property)
Char 2 = 3 (Color codes: 1 - 7)
Char 3 = Intensified on/off ( 1 or 0 )
Char 4 = Inverse display on/off ( 1 or 0 )
          i.e. wa_ekko-line_color = 'C410'
IT_FINAL_TEMP[] = IT_FINAL[].
LOOP AT IT_FINAL.
CLEAR IT_FINAL-DMBTR.
********added by .... .... on 17.02.2007
   if it_final-bmenge < 0.
IT_FINAL-DIFFER = IT_FINAL-TMENGE * IT_FINAL-BMENGE * -1.
   else.
*********end by .... .... on 17.02.2007
IT_FINAL-DIFFER = IT_FINAL-TMENGE * IT_FINAL-BMENGE.
********added by .... .... on 17.02.2007
endif.
*********end by .... .... on 17.02.2007
IF IT_FINAL-BWART = '101'.
    IT_FINAL-LINE_COLOR = 'C210'.
    IT_FINAL-MENGE101 = IT_FINAL-MENGE.
    IT_FINAL-DIFFER = 0.
    LOOP AT IT_FINAL_TEMP WHERE BELNR = IT_FINAL-BELNR AND
                                EBELN = IT_FINAL-EBELN AND
                                EBELP = IT_FINAL-EBELP.
      IF IT_FINAL_TEMP-BWART <> '545'.
        IT_FINAL-DMBTR = IT_FINAL-DMBTR + IT_FINAL_TEMP-DMBTR.
      ELSE.
        IT_FINAL-DMBTR = IT_FINAL-DMBTR - IT_FINAL_TEMP-DMBTR.
      ENDIF.
    ENDLOOP.
    IT_FINAL-RATE = IT_FINAL-DMBTR / IT_FINAL-MENGE101.
    SELECT SINGLE
      NAME1
    INTO
      IT_FINAL-NAME1
    FROM
      LFA1
    WHERE
      LIFNR = IT_FINAL-LIFNR.
    IF SY-SUBRC <> 0.
      CLEAR IT_FINAL-NAME1.
    ENDIF.
ELSEIF IT_FINAL-BWART = '543'.
    IT_FINAL-MENGE543 = IT_FINAL-MENGE.
    IT_FINAL-LINE_COLOR = 'C200'.
    IT_FINAL-DIFFER = IT_FINAL-DIFFER - IT_FINAL-MENGE543.
    CLEAR: IT_FINAL-LIFNR,
          IT_FINAL-EBELN,
          IT_FINAL-BELNR,
          IT_FINAL-MENGE_I,
          IT_FINAL-BUDAT.
ELSEIF IT_FINAL-BWART = '545'.
******added by .... on 17.02.2007
   IT_FINAL-MENGE = IT_FINAL-MENGE * -1.
    IT_FINAL-MENGE = IT_FINAL-MENGE.
*******end by .... on 17.02.2007
    IT_FINAL-MENGE545 = IT_FINAL-MENGE.
    IT_FINAL-LINE_COLOR = 'C200'.
    IT_FINAL-DIFFER = IT_FINAL-DIFFER - IT_FINAL-MENGE545.
    CLEAR: IT_FINAL-LIFNR,
          IT_FINAL-EBELN,
          IT_FINAL-BELNR,
          IT_FINAL-MENGE_I,
          IT_FINAL-BUDAT.
ELSE.
    IT_FINAL-LINE_COLOR = 'C200'.
    CLEAR: IT_FINAL-LIFNR,
          IT_FINAL-EBELN,
          IT_FINAL-BELNR,
          IT_FINAL-MENGE_I,
          IT_FINAL-BUDAT.
ENDIF.
MODIFY IT_FINAL.
ENDLOOP.
ENDFORM.
*&      Form GENERATE_ALV_FIELDCAT
      text
FORM GENERATE_ALV_FIELDCAT.
DATA: POS TYPE I.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'COUNT'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'S. No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MATNR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Mat. No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'BMENGE'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'BOM Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'EBELN'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'PO No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE_I'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'PO Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'BELNR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Gr. No.'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
CATALOG-HOTSPOT = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'BUDAT'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'GR Date'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE101'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = '101 Gr Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE543'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = '543 Gr Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'MENGE545'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = '545 Gr Qty'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'DIFFER'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Difference'.
CATALOG-NO_ZERO = ' '.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'LIFNR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Vendor'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'NAME1'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Vendor Name'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'RATE'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Rate'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
POS = POS + 1.
CLEAR: CATALOG.
CATALOG-COL_POS = POS.
CATALOG-FIELDNAME = 'DMBTR'.
CATALOG-TABNAME = 'IT_FINAL'.
CATALOG-SELTEXT_L = 'Value'.
CATALOG-NO_ZERO = 'X'.
CATALOG-FIX_COLUMN = 'X'.
APPEND CATALOG TO TCATALOG.
ENDFORM.
*&      Form ALV_SHOW
      text
FORM ALV_SHOW.
LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
LAYOUT-BOX_TABNAME = 'IT_FINAL'.
LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = SY-REPID
      I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
      IS_LAYOUT               = LAYOUT
      IT_FIELDCAT             = TCATALOG
      IS_VARIANT              = VAR1
      I_SAVE                  = 'A'
      IT_EVENTS               = TEVENT[]
    TABLES
      T_OUTTAB                = IT_FINAL.
ENDFORM .                    "ALV_SHOW
*& FORM USER_COMMAND.
FORM USER_COMMAND USING
          R_UCOMM LIKE SY-UCOMM
          SELFIELD TYPE SLIS_SELFIELD.
DATA: TABIX LIKE SY-TABIX,
      WA LIKE IT_FINAL.
TABIX = SELFIELD-TABINDEX.
READ TABLE IT_FINAL INTO WA INDEX TABIX.
IF NOT WA-BELNR IS INITIAL.
set parameter id : 'MBN' FIELD WA-BELNR.
CALL TRANSACTION 'MB03' AND SKIP FIRST SCREEN .
ENDIF.
ENDFORM.

Hi,
U can try this standard report for subcontracting:
J1IFR (Transaction name),
Not sure how much this will be useful to u.
regards,
Viji

PO number and material issued against this PO for subcontracting

How to know the link in between the PO number and material issued against this PO for subcontracting.
I have checked that PO history is not getting updated.
Thanks,

Hi,
We have 2 different scenarios where you can post a goods issue to Subcontract Venodrs.
Scenarios 1: You can post the goods issue against a subcontrac vendor with out referencing the Subcon PO from ME2O, at this stage we will be knowing what is the stock at subcontract vendor but we will not be knowing the issues against which and how much Quantities are posted.
So when we are post goods receipt, then we will come to know the consuption quantities.
Scenario: 2, If we use the delivery concept then we can track the goods issues against the subcon POs.
If you really keen to track the material issued to Subcon vendor against a PO so better use with delivery.
Thansk,
Satya.

Account postings in GR & IR for Subcontracting

Hi Experts,
I need to know the account postings for both GR & IR during Sub contracting.
Let us take the scenario . .
PO price - 1000(Gross) + 200(Tax) = 1200 (Net) for 1 Qty
GR - PO Net Price due to Moving Average price.
IR - 1200(Gross) + 240 (Tax) = 1440
Please explain the accounting entries during Goods Receipt and Invoice Receipt.
By
Prabhu

If Material has Price Control as "V" (MAP)
(BSX) Stock A/c of Assembly - Dr
(BSV) Change in Subcon Stock - Cr
(FRL) Subcontracting Charges - Dr
(WRX) GR/IR Clearing A/c - Cr
(BSX) Stock A/c of Components - Cr
(GBB-VBO) Consumption A/c of Components - Dr
If Material has Price Control as "S" (Std. Price)
If Material is having Price Control as "S" then Price Difference A/c will also in picture.
This depends on configuration; SPRO > MM > Inventory Management and Physical Inventory > Goods Receipt > Price Differences for Subcontract Orders at Goods Receipt
Price Differences for Subcontract Orders at Goods Receipt
In this step, you configure for each valuation area whether price differences are generated for a Subcontract order at the time of a goods receipt if the manufactured material is managed at standard price and the standard price varies from the receipt value (externally performed service + value of components + delivery costs).
Example
Finished product: $400 (value at standard price)
Subcontract order:
o Ext. service : $250
o Components : $100
Posting schema without price differences:
Stock account FERT : 400 +
Stock change : 400 -
GR/IR clearing acct : 250 -
External service acct : 250 +
Compon. stock account : 100 -
Consumption account : 100 +
Posting schema with price differences:
Stock account FERT : 400 +
Stock change : 350 -
Price difference : 50 -
GR/IR clearing acct : 250 -
External service acct : 250 +
Compon. stock account : 100 -
Consumption account : 100 +
hope it help

Calculation for subcontracting item of type N (non stock) as it for type L(Stock)

Hi Gurus,
I have a Requirement for calculating the cost for Subcontracting Non stock items N as it is getting calculated in standard functionality for subcontracting items of Type L.
This will be done in CK11n ( used to calculate the standard cost estimate of the product) for header as well as component materials.
please suggest the user exit or Badi where i can change.
Please refer the below logic-
BOM for the material 2000500 as Header and 1LPL0835298AB as a component and this component has an assembly with 7008508 as a component and this component is an Sub contracted item and this has an assembly with component 1LBA182151-3.
Price calculation for the material 7008508 (Item Category as N). Since this is sub contracted item the price will picked from field EINE-NETPR.
In EINA, pass the material (MATNR=7008508) to fetch the list of info records (INFNR) created for that material.
Then it has to input those info records to EINE table along with Purchasing organization (EINE-EKORG=PT02).
From the output of EINE table, it should compare the price (EINE-NETPR) of the PIR and should take the least price from those PIR`s.
If the currency is other than PLN, then it should be converted to PLN based on conversion charges.
For Material (MATNR=1LBA182151-3), it should pass the material number to table MBEW along with valuation area (BWKEY = WERKS).
From the output, it should check the Price control (VPRSV) ‘V’ or ‘S’
If ‘V’ the price will be picked from the field “VERPR”
If ‘S’ the price will be picked from the field “STPRS”
Also from the output, it should check the Price unit (PEINH) ‘1’ or other than ‘1’. If it is other than ‘1’ it should divide the VERPR or STPRS by PEINH. Then this is the price of the Material “1LBA182151-3”.
The material (MATNR=1LBA182151-3) should be passed to table “MARA” and will take the Base unit of measure from that table “MEINS”.
Br,
Surya

Hi Surya,
Please put breakpoints in any of the below BADI's and check if any of them will trigger for your
requirement:
VALUATION_CK                            BAdI for Valuation in Product Costing
CK_KALAMATCON2_CI                       BAdI for CI Fields for Table KALAMATCON2
COSTINGRUN_CK                           Edit Costing Run
COST_APPORTION_CK                       Maint Apportionment Structure Joint Production: Dist Rules
CO_PROD_COSTING_CK                      Cost Management for Joint Products (Costing, Target Costs)
DATA_EXTENSION_CK                       For Data Enrichment in Product Costing
DYNPRO_EXTENSION_CK                     BAdI for Interface Enhancement in Costing
ORDER_COSTING_CK                        Enables Header Data Changes in Preliminary Order Costing
QUANTITY_STRUCT_CK                      Enables Quantity/Structure Changes in Costing
SUR_STOCK_TRANSF_CK                     Overhead on Materials with Stock Transfer Between Plants
Thanks
Sri

Different tax codes in the MIRO for single service item

Dear all,
Customer wants to enter 2 different tax codes in the MIRO for single service item. How it can be achieved?

>
Milosavljevic Sreten wrote:
> Just loudly thinking... what can be reason that one service for same invoice is taxable with two different tax codes?
>
It is cross-counties transportation. Part of route outside company country is non-taxable, inside part is taxable. Amounts are proportional to distance and hence become known only at time of invoice receipt.
Users do not want to create 2 separate invoices. They would like to have ability to enter 2 lines in MIRO. But I need your help to understand, how it can be done? Service receipt is done by single line (because actual taxable / non-taxable amount is unknown at that time). So, is it possible to enter non-taxable amount in MIRO in some additional line?

How to block accounting by MIRO for specific type of documents.

Hello
Is there any possibility to block accounting by MIRO for specific type of document? So you could only account specific type of documents by FBV* or FB*.
Regards
Marcin Obukowicz

Hi,
You can try to make a validation (OB28) which will check the document type based on transaction code prerequisites.
Regards,
Eli

Problem while postings a MIRO for partial deliveries.

Hi,
We ar facing a problem
while posting a Miro for the Planned delivery costs for the import orders.
when we receive an item in partial consignment of the same order.
The system will allow for the first time to post the deliver cost, after this the MIGO and MIRO will be done and cycle will be completed.
For the second remaining consignment, the system is not allowing to post the Miro itself for the delivery costs.
IT is giving an error message."Quantity invoiced greater than goods receipt quantity."
We have disable GR based IV in PO
Provide me the solution.
Sunil

hi,
i hope you have done the following steps
1) for import do MIRO first for the custom duties ( CVD, Edu Cess, S& H Cess on CVD) by selecting planned delivery cost.
2) J1IEX ( capture) referencing material document number of MIRO.
3) MIGO of the qty received.
4) J1IEX ( post).
follow the same steps for the next consignment.
what I see is that you have mentioned the full qty against the value in MIRO.
say ur PO qty is 10 and your partial shipment is of qty 5.
then in first MIRO entry enter qty as 5 not 10.
pl check your material documents of MIRO and MIGO and see what qty you have entered.
Thanks and regard
Rajesh

Problem while doing GR for subcontracting

This is Naresh. When Iam posting GR for subcontracting material an error is coming as "G/L account 400020 does not exist in chart of accounts INT". And when Iam trying to create G/L account in INT with my company code(using FS00) another error is coming as " description in language EN already created". Can anyone help me.

you have chosen a pretty bad subject.
with this subject you will find people that have knowledge in subcontracting, but your issue is in G/L account maintenance.
Guys that are are experienced in that field will probably not open your thread.
best you create your thread again with a better subject and in a different forum: in the finance forum.

MIRO for subcontracting

Similar Messages

Maybe you are looking for