MIRO & MIGO posting date

Hi experts,
My MIGO(101) date is 5/1/2008. In MIRO my user has input the posting date as 1/1/2008. So system is allowing to post it. How to stop it? Plz explin me........
Thank you
Sap MM

Hi,
Unfortunately, SAP does not provide any such validation between GR posting date and that of IR during LIV process. As long as the GR was posted prior to IR, then SAP will allow you to post. Therefore, what you should do is to activate the user exit so that SAP will populate the error message if end user tries to change the posting date which is earlier than that of the GR.
Cheers,
HT

Similar Messages

How to changes baseline date in miro with Posting date

Please tell me the procedure to change the baseline date in miro with posting date (EKBE-BUdat) on basis of Purchase order No (EBELN) .
I tried it by using user exit :-EXIT_SAPLKONT_011 Enhancement : LMR1M002 but got stuck somewhere .Please tell me how to work on this .

hey guys my problem is solved by using a badi " MRM_PAYMENT_TERMS" .In method "PAYMENT_TERMS_SET" writing the code .

MIGO Posting Date based on GR/GI Slip Number

Dear Friends.
I need your great Inputs
1) I am creating gatepass ticket using T-code LECI,
    Here I am getting Sequence Number like 12 and also
    I am entering here Check-In date like 05.06.2005.
2) In MIGO Transaction,Goods Receipt Purchase Order Screen -->General header :
    when I enter Sequence number 12 in MIGO Transaction(that has been       generated by LECI) in GR/GI Slip no field,the system has to pick        the Check-In Date(05.06.2005) that is been entered in LECI Transaction into Posting date field instead of system date in MIGO automatically.
For the above is there any User-Exit/Badi/ or any other approach?
Please give me your advice.
Thanks.
Surendher Reddy.B

Hello Surendher,
check this MBCF0005.
EXIT_SAPM07DR_001.
Rgds,
Mano Sri

MIGO Posting Date - Authorisation to Change/Display for Certain User ID

Dear all
There is this business requirement
1. Warehouse users should not change the Posting Date of the GR refer PO. It is to avoid user from delaying their work to enter into SAP system the next day although they have received the goods today. As such, we should change the field status of POSTING DATE into Display mode.
2. However, if the warehouse user has forgotten to enter on the GR Date, they have to go to their Warehouse manager to ask him to enter for them, since the field status: Posting Date is set to display.
Question:
I know how to set the field status of Posting Date to display, but will this field status will be applied as "display" for all the user id? If so, then how can I control only the Warehouse Manager can have the Change Mode for Posting Date?
Thanks in advance
Edited by: Daimos on Oct 14, 2009 8:37 AM

Hi all
I found out this can be done by assigning manager and store keeper to different Tcode with different field status:
Warehouse Manager - MIGO_GR, field status of Posting Date: Required
Store Keeper - MIGO, field status of Posting DAte: Display Only
This will solve the problem!

Option to restrict MIGO Posting date after GRR posting date

Dear All,
My client is looking for an option to restrict the posting date of MIGO to be after GRR Posting date. Is there any way to do it? where the system don't allow you to post a MIGO without the GRR transaction has taken place?
One option i got is to tick the GR MESSAGE tick which creating a PO. Is it the right solution?
I would request you all to kindly give in your valuable inputs if in case anything else can be done or for the suitability of this option.
Regards,
Prashant

Hi
Could you specify your business scenario in details and also specify what is GRR
Regards
Sanil Bhandari

User exit for MIGO Posting Date

Dear all,
My Client want requirement is : Posting date of GRN should be after last posting date of goods issue
i.e. GI                261 1st june
       GI Reverse 262   2nd june
again GI 261 28 may   ( as 2 posting perod are open )
then user should be able to do GRN on or after 28th may
For this user exit please suggest me any FM or logic
my current logic is allowing to post GRN after 1st june i.e. latest GI date but that is not matching client requirement
Please suggest
Regards,
Ishwar

Hi,
   Enhancement for MIGO ,you can try these user exit
MB_CF001--> Customer Function Exit in the Case of Updating a Mat. Doc.
MBCF0002 --> Customer function exit: Segment text in material doc. item
MBCF0005 --> Material document item for goods receipt/issue slip
MBCF0007 -->Customer function exit: Updating a reservation
In BADI,you can refer these
MB_CIN_LMBMBU04--> posting of gr
.In MKPF table having data (posting date of goods issue) BUDAT-field name,tell the conditions as per your requirement to ABAPer,they can implement the enhancement as per your requirement...
I hope,it will help you
<=<< Sharing Knowledge is a way to Innovative >>=>
By,
Yoga

MIGO posting date check

Dear Expets,
How can I restrict that my user cannot enter the posting date in future in MIGO.
Pooja

Use the userexit to control the document date in MIGO not to allow the date in past & future.
Make some restriction in userexit.EXIT_SAPMM07M_001.
Make your requirement in this user exit.

MIRO IDOC - Posting Date

Hi
We are using IDOCs for incoming invoices. However, the posting date is by default taken as system date. I think it is standard SAP functioanlity.
Do you guys have any work around to define the posting date to overwrite the system date?
Thanks
Venkat

Hi
check following link it may help you
[INVOIC01 IDoc - Map posting date;
Regards
Kailas Ugale

Exchange Rate to be picked up from MIGO Document Date

Dear Friends,
During MIGO for a foreign purchase order the exchange rate is picked up from table OB08 based on the MIGO posting date.Is it possible for it to be picked up based on MIGO document date using exit.We are not using Material Ledger.
TIA
Sathish Kumar

Dear Sathish,
We have the same issue about MIGO exchange rate.
We can change exchange rate derived from document date in MIRO via to using BADI FI_TRANS_DATE_DERIVE. But in MIGO we don't know how to change the exchange date from Posting date to Doc date.
We are using Material Ledger, so we can handle the amount of exchange rate diff. Anyway we don't want post the diff from GR and IV exchange rate.
TIA
Mahnkwi Choi

Posting date ealier to sevrive entry

hi every one
can any one suggest for the user exit for the MIRO about posting dates
actually problem is we do MIRO for service entry sheet. so we would like the posting date of the MIRO should be greater then the posting date of the service entry release date.
so could any one suggest me which user exit will perfectly set for this requirement.
regards,
Manu

no answers from forum

MB51 showing data for just one Posting date

Hi All,
MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
Please tell what should i do ASAP.
Thanks
Madhur

HI,
MB51 is showing material docs for just one posting date while we searched for whole one year from 01/01/2008 to 12/01/2008.
year from 01/01/2008 to 12/01/2008 i Think this is MM.DD.YYYY format,
Ok can you clear your MIGO posting date fromat i.e MM.DD.YYYY or DD.MM.YYYY,check it at your end
or try this give only plant and movement type 101 and execute report
Regards
Kailas Ugale

MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt)

MIRO(Invoice Verification) posting date is lesser than MIGO(Goods Receipt) posting date.
Explanation:
Miro sholud be posted after the GRN has posted. It means that the Posting date of Miro should be greater than or equal to the Posting date of Migo. But I am facing the issue that I can able to post the Miro before the Migo date..
For example: I have posted the Migo(Goods receipt) document with the posting date u2013 10.8.09 and at the same time I can also able to post the Miro(Invoice Verification) posting date as u2013 5.08.09. This is should not be allowed . Kindly give me the solution. Is there any options in SAP standards to restrict this type of Postings(without using user exit).
regards
Varadharaj

Hi
you need to use BADi for this INVOICE_UPDATE
you can give logic as whil;e MIRO system will compare posting date with MIGO doc , then create a Z error msg in se91 nad assign it in that badi
take help of ABAPer, check following link
[LINK |GR date lesser than the PO date, the system should show an error message.;

MIGO/MIRO Posting date to Display mode

HI all,
How can we set MIGO/MIRO Posting date field to Display mode.
Can this be set for User specific.
Please advise.Its Urgent.
Regards,
Jag

hi
for migo
do following
SPRO>MM>Inventory Mgmt/Physical Inventory-->Fields selection for goodsmovement Initial/Header Screens
for miro
U need to change the field selection for the posting keys used in MIRO.
go to OB41, there for the posting key 31 u do the field selection.
reward if useful
regards
kunal

MIGO/MIRO - possible? posting date accept only workdays

Is possible to accept only workday dates in MIRO and MIGO for posting date?
if any one knows please let me know how.
thanks.

Angelita,
If that is the case, then the only way to achieve this would to be use an exit/BADI and do a validation on the posting date in the MIGO/MIRO header and display a warning/error message to the user as required.
I think BADI MRM_HEADER_CHECK should work for the MIRO header validation. I am not too sure about MIGO - have an ABAPer check out BADI MB_MIGO_BADI.
Hope this helps.
H Narayan

Future posting date in MIGO MIRO

Hi,
My client want that system should not allow future posting date than current system date in MIGO & MIRO.
Ex. current system date: 30.12.2008
then system should not allow posting date 31.12.2008.
Please help how to do it.
Regard's
Parag lute

Hi Parag
To meet your client requirement, you need to change the message F5 192 from warning to Error.
Since this message F5 192 is not a customised, ABAP need to change code.Contact ABAPer.
Also you can check with OSS if they have any note for this requirement.
Hope this anwers your query
Prasad

MIRO & MIGO posting date

Similar Messages

Maybe you are looking for