MIRO payment block happens even after release
Dear Experts,
I got a trouble with invoice process. We are using workflow to release payment block, so that the status of the MIRO can be changed from "P Payment Request" to "Free for Payment". The problem is the status cannot be changed to "Free for Payment" even after release via workflow has been carried out. When we checked the workflow status, the workflow runs well, and the release successfully done via that workflow. Another problem is : this case happens only on several MIROs randomly. Sometimes this case happens, while in another MIRO this case never happens.
Can you help me with the problem? Is there any reason why this kind of issue happens?
Thank you very much
Hi,
You are telling that this issue happening on some MIRO invoices only but not for all.
check whether all MIRO invoices released by the same user or not?
Regards
Sai
Similar Messages
-
Kernel panic keeps happening even after I did the factory reset. any suggestions ?
kernel panic keeps happening even after I did the factory reset. any suggestions ?
Hi Hallry,
Let's free your device! It's important to have a properly working device. Have you attempted an alternate Hard Reset on the device http://vz.to/19r2DOO? If the alternate Hard Reset does not work, then the device would need to be replaced. How long have you had this device? Any liquid or physical damage to the device? Keep me posted
Thanks,
PamelaF_VZW
Tweet us @vzwsupport -
Changes in PR even after release
Dear Gurus
In purchase Requisition change (ME52N) it is allowing to change PR Quantity and Price even after released from the higher authorities.
What Configuration has to be done so that After release of PO system should not allow to do any changes in Purchase requisition.
Where as the purchase requisiotn changes has to be done only after the higher authority asks to make changes i.e the higher authorities has sent for revision.
Also plz let me know how can the higher authority set the purchase req for Changes in SAP (Any configuration has to be done for that).
Or any customizing settings required.
If the Changes is done in PR then again release strategy should be applicable.
Please guide me.
Regards
shaileshHi SHailesh,
In your release procedure for PR's. For the release indicator, in the field changebill enter
Options:
1 - Cannot be changed (no changes possible)
4 - Changeable, but new release in case of value change or strategy change
The above will resolve your issue.
if helpful award points
Regards,
Vivek -
Trying to purchase music but every time click on buy song nothing happens even after signing into account
Same for me. iTunes 10.7 on Mac OS X 10.6.8.
Apple, I'd love to give you some money, but you won't allow me to do it. Please fix this. -
I am having problems shutting down my MacBook Pro. I go to the apple and click shutdown or restart, it appears the shutdown process starts, the screen goes blue and the little circle keeps going round and round, but nothing happens even after 30 minutes.
Make sure you quit all your applications before shutting down.
And try resetting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC) -
Cannot see transported items in Queue, even after releasing them.
I cannot see transported items in Queue, even after releasing them. When Iam in transaction: SE09, I am able to see all the released objects, and the check marks next to each one which looks good...Where are these files? Under usr/sap/trans, they show up under logs with nothing in them except log data...Not in Cofiles & datafiles either.
Any input would be greatly appreciated.
AlanHello Jazz!
Our developer released them, and I will get more details from him. We can see them when in SE09/10. Just cannot see them in the import queue? Also can't find the files under: usr/sap/trans, except the logs???
We just want to find these files, and either zip them up, or put them on a CD for later use, and this project will wind down soon.
Any other suggestions on how we can find these files, as all exports normally show up in usr/sap/trans/data, and cofiles...but not in this case???.
Thanks Again,
Alan -
When the Mavericks download was complete (about 45 minutes), nothing happened, even after restarting. Still running 10.8.5
Look in your Applications folder. Is there a Mac OS X Mavericks installer in the folder? If there is then select it. Press COMMAND-I to open the Get Info window. See if the size of the file is around 5.3 GBs. If it is then try double-clicking on it to run it. If you cannot run it, then you have an incomplete download. Try it again. It's a very large file, and unless you have a really fast pipe it can take longer than 45 minutes to download.
-
RE: During MIRO payment block indicator piks up automatically
Hi All,
Can anyone tell me about this issue:
My user is doing MIRO at that time Payment block indicator picks up automatically for some invoices randomly what could be the reason.
1) there is price differences MIGO and MIRO the same
Pleas let me know the possible reasons to check in my case.
points will be assigned.Hi,
When you enter an invoice, the system suggests the values that it expects an invoice to contain as a result of the purchase order or goods receipt. If the invoice item differs from the default values, you must determine the reason for the variance by contacting the purchasing or goods receiving department or the vendor.
If a tolerance limit is exceeded, you receive a system message. You can post the invoice in the system, but it is automatically blocked for payment if an upper tolerance limit is exceeded.
An invoice can be blocked for payment due to one of the following reasons:
u2022 Variance in an Invoice Item
u2022 Amount of an Invoice Item
u2022 Stochastic Block
u2022 Manual Block
When an invoice is blocked, Vendor cannot be paid. Invoices can be blocked either automatically or manually. You can block an item by selecting the Ma (manual blocking reason) field in the item list.
When you post an invoice, two things happen:
u2022 The account postings resulting from the invoice are made.
u2022 In the vendor line of the accounting document, the system enters an u201CRu201D in the field Payment block so that Financial Accounting cannot make payment for the invoice.
I hope this will solve your doubt.
Regards,
Kapil -
Apple TV has gone off the deep end and is constantly asking me to re-verify my paymetn info... I do it time and time again and the message never stops. It pops up alomst anytime I do anything... When I first got the apple TV I only had to do this occasionally... Now it asks multiple times a day... Any idea on how to make this stop??? To the point that I will start using another streaming device soon...
I have been able to eliminate the Verification Required problem. I believe the thing that made the most improvement happened to be an OS update on the Mac where the home share lives, but it might also be the combination of trying many fixes. The Mac was already running the latest iTunes (10.7), but the my OS (OS X Lion, 10.7) was not patched all the way up to 10.7.5. I am not running Mountain Lion. My Mac is a Mini, 2 GHz Intel Core 2.
I applied the OS patches, after having changed my AppleID password (more complex) and payment method back and forth, and now with all of that done, the Verification Message has gone. I do, still, have the ATV saying it can't connect to the iTunes store frequently, but that message is not as frequent and as annoying as the constant Verification Required message. Note that my ATV showing the error message about "Can't connect to iTunes Store" is on Ethernet and I believe that there is a bug with the ATV update that pertains to Ethernet connectivity which is discussed in the Support Forums on other threads (one I can recall is MLB TV not working, look for MLB, Update, and Ethernet if you want to find that).
Summary of my personal experience to arrive at a fix for Verification Required:
iTunes on host Mac is up to date (10.7)
AppleID password is complex enough (it previously was not)
Payment method was changed away to another method and then re-established, re-confirmed to my Visa
Mac OS Lion was updated to latest patches, 10.7.5
Also, for what it's worth, my Mac is also on Ethernet and my switches are all new Linksys GB switches with the exception of my Linksys WiFi/Router which is only "switching" for WiFi users and connections off of the LAN to the internet.
Best of luck to all, here. This has been terribly frustrating, and lacking any official Apple participation or even clear, cut answers from the user community. I hope my experience helps someone. You may also contact me directly at my first name at my lastname dot com.
Sincerely,
Chris Adragna -
Once I installed a game and it asked me to change my homepage to AllGamesHome.com and my default search engine to AllGames Home search,and I accepted it but now I can't change it to any other even if I do it under options of tools menu it gets changed back to AllgamesHome when I restart firefox.
If you have the AllGamesHome toolbar, see how to uninstall it:
http://www.allgameshome.com/how_to_uninstall/
''if this does not solve the problem ''
type in the address bar '''about:config'''
then press the button '''i'll be careful i promise'''
then type in the bar '''keyword.URL'''
then right-click on it, select modify, and put
http://www.google.com/search?ie=UTF-8&oe=utf-8&q= (copied from here)
click OK, exit firefox and restart-it.
see more info for[http://kb.mozillazine.org/Keyword.URL Keyword.URL]
then [http://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page How to set the home page ]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
"firefox prevented this page from automatically redirecting to another page" is the message on the status bar that appears when I try to open facebook via an email message to follow a thread.
See:
* Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
See also:
* http://kb.mozillazine.org/accessibility.blockautorefresh
* https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab -
I am unable to play videos on Facebook unless I download a "new" flash, which I am unable to do -- following the instructions to trash the previous version included. I'm told to hit "save," but no downloading activity occurs at all. I'm using OS 10.6.8. Any clue what to do?
Hello, it seems that support is not aware of this blog post: http://blogs.adobe.com/crawlspace/2013/06/updatingupgrading-to-photoshop-cc-faq.html#video
Adobe decided to limit to Lion, each operating system they support means more quality assurance.
The APIs they used for video is not supported in Snow Leopard (I upgraded just for that)
Adding another one means more quality assurance, tests, detrimental to the new features.
If you are a creative cloud subscriber you can also install Photoshop CS6 that has a video module compatible with 10.6.8 -
MIRO still Payment Block after Release
Dear Experts,
I got a trouble with invoice process. We are using workflow to release payment block, so that the status of the MIRO can be changed from "P Payment Request" to "Free for Payment". The problem is the status cannot be changed to "Free for Payment" even after release via workflow has been carried out. When we checked the workflow status, the workflow runs well, and the release successfully done via that workflow. Another problem is : this case happens only on several MIROs randomly. Sometimes this case happens, while in another MIRO this case never happens.
Can you help me with the problem? Is there any reason why this kind of issue happens?
Thank you very muchhi,
check the below mwntioned link.
Payment Block after MIRO posting
regards
sumit simran -
Payment block for Quality reason
HI,
How can I block invoice for paymant due to quality reason ?
Regards,
Chetan.Hi ,
Check whether any inspection lot is created for that material and go thro the following
If the Invoice block indicator is set in QM control key , when the invoice is created, the system determines whether an inspection lot exists and if necessary, sets blocking reason I. This occurs in the following instances:
o There is still no usage decision for the inspection lot
o The inspection lot is rejected.
If all settings are OK and Once GR is done,
In MRBR transaction , you can see the Blockage Indicator set for the Quality field.
Once UD is given for the matl by the Quality , payment can be made after releasing by removing the blockage indicator.
Regards
K.M.Arun -
Payment block R gets automatically get triggered
Hi Guys:
When i do MIRO,payment block R gets automatically triggered and payment block R is updated in invoice posted document. I am unable to understanding from where it is coming. Please help me to resolve the issue.
BrHi,
Check this SAP link you will get the idea
http://help.sap.com/saphelp_46c/helpdata/en/47/60fa5749f011d1894c0000e829fbbd/content.htm
Which is defined in
OLMR ->Invoice Block ->Stochastic Block ->Activate Stochastic Block
OLMR ->Invoice Block ->Stochastic Block ->Set Stochastic Block
Also read the IMG Activity documentation
Edited by: redriver on Jan 26, 2012 4:31 PM
Maybe you are looking for
-
I have an iMac with Mountain Leon. Using iTunes and airplay, I would like to see subtitles for movies that I have put into iTunes (not purchased through Apple). Normally I would use aa srt file with the same name but I cannot load them into iTunes. A
-
File to email, with attachment.
Hello experts, I scenario, i need to send a email to a user, whenever a file is placed in th execption folder of the MDM Ports. I have used as Sender channel as the File adapter and receiver channel as Mail. My MDM System is on AIX system, and has FT
-
App-v 5.0 Sequence package that requires reboot?
Hi, I'm sequecing a package that requires a reboot. When I do the reboot, I cannot continue packaging (it does not give me the option to continue). Please advise. J. Jan Hoedt
-
Message filering is not working. I have followed and tested the steps
Have tried several times to add new filers with no success. is there a setting that turns this filtering off? It appears to have worked in the past but not recently.
-
Power on laptop connected to Thunderbolt display without opening laptop lid?
I have a Macbook Pro (2.7 GHz Intel Core i7) running Lion connected to a 27" Thunderbolt display. Is there any way to power on my computer without having to open the laptop lid? Thanks for your time. Best regards, Erin