MIRO - Payment Tab Payments Terms Field (Display Mode)
Hi,
My requirement is to make the MIRO - Payment Tab> Payments Terms Field into Display Mode.
How to achieve this.
Regards,
Baskar
Hi,
With the help of the Screen Variant, you can able to set it.
Thanks,
Log.
Similar Messages
-
Payment terms field display at MIRO screen
Hi,
How can I make Payment terms field "Display" at MIRO screen??
Regards,
SattujHi,
The fields on MIRO are not configurable as with other transactions.
You have no config control of these fields.
You should not really block the field, because what happens if you ever need to change it (believe me this WILL happen).
Steve B -
FBR2 Customer Invoice - Payment Terms Field Display
Hi Experts,
Is there a configuration where the payment terms for this transaction is always displayed even if the customer used has no sales area maintained? The reason is they don't want to maintain the sales area for customers since it is a inter-company non-trade transaction which is they post directly to customer via transaction code FBR2.
Thank you for your help!Hi Experts,
Is there a configuration where the payment terms field is always appearing in the FBR2 transaction code?
Thank you so much! -
during IV process users are changing the payment terms field, we want restrict this field changes by users during IV process.
Plz suggest the way ...HI,
The below three methods could be used.
1. T-cd:SM30->add theerror-> "E" into allowed column of F5231 in T001S, untick the switch off flag , then go to OBA5 to set this msg into "E" ,then when ZTERM is changed, the error:F5231 will be issued.
2.Define transaction variant in SHDO for FB60 and MIRO.
3.Using validation to check whether ZTERM is changed in OB28 using user exit.
Regards
KK -
Payment term in display.
Hi,
I want to make payment term in display mode in MIRO. Can we do that through document change rules but please not that i want it only for F-53 t code. Please guide how can this be achieved.HI Lilli
This will help you.
MIRO field settings for Payment tab
Satish -
Payment term Field at header level
Hello
my requirment is while creating sale order the payment term field at header level should be in display mode. or not shown while creating sale order. doesnot want to maintain user exit. or anyone have knowledge of field (of payment term ZTERM ) object ?
RegardsDear Mr. M Yasir Dogar,
To this requirement as Lakhsmi says, to make the Payment term in display mode, without user exit you can do with Tansaction variant SHD0. It actually make a view sort of control.
Steps:
Run T CODE: SHD0
Transaction VA01
Variant ZVA01_VARIANT
create a sales order.
during the process system, records all the details of object involved in the sales order creation.
and it records with the screen number as variant name.
After execution go to details, Go to
Name of screen variant: ZVA01_VARIANT_4440
and in Payment terms VBKD-ZTERM, select Output only (means it will only display the data from master) and others option also will be there like * Invisible, Required.*
Select the appropriate one.
Along with this activity,in the authorization - profile the Variant should be assign to the USERS having T CODE : VA01. This can be done by the Basis team.
We did similar to control the manual entry of Payment terms.
Regards,
Mani -
Missing Payment Term field on tcode FBR2 Customer Invoice Display
Hi Experts,
This is a more detailed explanation on the Payment terms field issue we are encountering since last week.
I have some problems with their request that they want to show the payment terms field in the transation code FBR2 - Customer Invoice even if the Sales Area Data for Customer is not maintained but Company Code Payment Terms is maintained. I need help on the configuration on how to show the field.
What I researched is that there are 2 maintainance of Payment Terms Field:one in the Company Code and another in the Sales Area. As I read on some forums, the Payment Terms in Sales Area should be the default when using the SD Process however, the Payment Terms in the Company Code should be the default value when they use FBR2 - Customer Invoice. But thay still cannot see the payment terms field in the Accounting Document they already created.
I already checked in transaction OBC4 the Reconcilliation Account Group and the Payment Terms field is optional there and even the Posting Key 01, which is also optional.
Please help me on this. Thank you.I did some checking on the past few posting, and I found some posting to the same account also the same tcode FBR2. However, the other one is with posting key 01 - Invoice.
The Problem occurs when we use FBR2 then the posting key is 09 - which is a special g/l posting for the account. How can I check why the "Payment Terms" field is still not displayed or cannot maintain in this transaction? -
Disable Payment Term field in the Marketig Document
Hi everyone,
I would like to ask if I can make a particular field in the marketing document be active but disabled without having to modify it using SDK? I would like to make the Payment Terms field in the Accounting tab of the AP Invoice to be disabled from the user so that he cannot change the default value during encoding of invoice. If it is not possible what workaround can you suggest.
Any help will be appreciated. Thanks
MaluHi,
for further infos about Coresuite u may have a look at their homepage :
http://www.coresystems.ch/coresuite-customize.html?&L=2
We bought Customice & Designer. Customice enables you to change the hole forms, create new tabs eg. in BM Master form or to hide fields. The designer is a very nice form editor, much easier than XL Reporter and more powerful than pld.
Regards Steffen
P.S. I am not a employee of coresuite -
Reg:FB02 - payment terms field shouldbe disable
Dear all,
When i am doing the transaction by using FB02 tcode for open items once i am maintaining the payment terms for that document number , after that no one cant able to change that document number payment terms field should be disable mode.
But i cant get this feature for open items. But i can get this feature for cleared items. Once that document get cleared , automatically the payment terms field also going to disable mode.
This same feature should be needed for open items also, once the payment terms field entered, it will leads to go to the non editable mode.
Helpful answers will be rewarded.
Thanks,
Sankar MHi Enrique,
I think it is because of Field Status .So Check the Field Status Variant in SPRO.
Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Invoices/Credit Memos->Make and Check Document Settings->Define Field Status Variants
Check for your Field Status Variant assigned for your company code then the Field Status Group.Hope you can see the Field Payment Term check whether it is Suppressed or not else make it Optional or Required according to your requirement.
Hope this might help you
Regards
Andrew -
Payment Terms Field in FB02 is not available
Hello experts. Can you help me find where I need to configure the setting to allow the user to display and change the Payment Terms field when displaying/changing a customer invoice via FB02? We are on ECC 6.0 and we are using New GL. This field is also not being displayed when we are using FB70 to enter a Customer Invoice.
Hi Enrique,
I think it is because of Field Status .So Check the Field Status Variant in SPRO.
Path:Financial Accounting (New)->Accounts Receivable and Accounts Payable->Business Transactions->Outgoing Invoices/Credit Memos->Make and Check Document Settings->Define Field Status Variants
Check for your Field Status Variant assigned for your company code then the Field Status Group.Hope you can see the Field Payment Term check whether it is Suppressed or not else make it Optional or Required according to your requirement.
Hope this might help you
Regards
Andrew -
Hi,
we want to grey out the payment term field in the sales order screen for the end user.Please suggest what should be done
Thanks
AJHi,
This can be done by using the T.Code "SHD0".
Goto the T.Code "SHD0".
Enter the "Transaction Code" as "VA01".
Click on "screen variants" tab.
Enter the "Screen variant" as "BUS2032_4480".
Click on Change.
Search for the field " VBKD-ZTERM" by using (Ctrl+F).
Maintain the tick mark under "Output Only" field.
Save.
Regards,
Krishna. -
Payment terms field as reuired field
hello gurus
where i have to configure for payment terms field as a required field at the time of making Purchase order.
Thanks
Venkat.PHi Venkat,
This is defined in Screen Layout at Document Level. For all external purchasing documents and purchase requisitions, you can specify the input attributes of fields by using field selection keys.
A field selection key determines whether a field is:
o A mandatory-entry field (input required)
o An optional-entry field (input possible)
o A display field (field displayed only, input not possible)
o Suppressed
To do this setting you need to follow the path as SPRO->Material Management->Purchasing->Purchase Order->Define screen layout at document level. Create ur field status group with payment terms as mandatory.
Hope I had been able to help you. please assign points.
Rgds
Manish -
Payment Term field to be set as Non Editable in Sales Order
Hi,
I have a requirement, in which the user wants to make the Payment Term field in Sales Order as Non Editable in case the Payment terms is copied from Customer Master to Sales order.
In case no value is copied, it should be editable.
Is there any setting to make this happen.
Can anyone help on this?
Please advise.
Regards,
HarshHarsh,
2 Options,
1 by changing screen variants by SHD0
2. By modifying USEr Exit.
Thanks,
Raja -
Payment Terms field mandatory in PO
how do you make the payment terms field mandatory in ME21N - ie creating a purchase order screen??
pls helpHi,
The payment terms is picked up from vendor master or it may pick from inforecord if maintained,
There are 2 types of payment terms one mainitained in purching view and the other maintianed in company code view.
Payment terms if not made mandatory in vendor master then you have to make this mandatory in screen selection for tcode ME21N
Thanks & Regards,
Kiran -
Invoice Reference Number "V" + Blank Payment Terms field
Hi Experts
Need your validation on one point. I have credit memos with invoice reference number field filled with "V" but payment terms in document is blank.
Payment terms in Vendor Master Data is XXXX (Net due 30 days). But when I run the Payment Program within 30 days for this vendor, the credit memo is picked up and adjusted.
Is my understanding correct that it is because of the following reasons -
By putting V in invoice reference number, the system will overlook the payment terms mentioned in Vendor Master Data and follows whatever is mentioned in the document.
And because the payment term field is empty in the document, it is taking baseline date as payment due date and thus picks the document in F110 program.
Points will be rewarded to replies with explanations.
Regards
ArjunArjun,
please check my comments:
By putting V in invoice reference number, the system will overlook the payment terms mentioned in Vendor Master Data and follows whatever is mentioned in the document.
In all cases the document entry overlook the master data entry. The vendor works as default values during document entry.
And because the payment term field is empty in the document, it is taking baseline date as payment due date and thus picks the document in F110 program.
Don't change the document defaul entry if you want the vendor assignment. If it's blank you have to assign same Payment terms from you vendor otherwise you will have only the baseline date.
Best Regards
Maybe you are looking for
-
CS5.5 crashed won't respond to play button
After the crash I could neither recover what I was working on nor play any other files. I am running Version 4.0 Build 1815 on a MacBookPro 17". I have been using Audition from the before Adobe when it was Cool Edit, 18+ years. This is a first for
-
Toplink JPA properties in persistence unit are ignored
I'm trying to make some EJB3 stateless session bean webservices, using the toplink essentials (build b41 beta 2) shipped with OC4J stand-alone 10.1.3.3.0. Basically I have a 'model' project with my EJB3 entity beans, and a persistence.xml. Then I hav
-
PLANNEDORDER_GETDETAIL Msg type how to create IDOC TYpe
I have copied the BO BUS2004 to a ZBUS2004 along with Messagt type ZPLANNEDORDER_GETDETAIL, FM ZBAPI_PLANNEDORDER_GET_DETAIL, what I cannot do if create a copy of the required IDOC TYPE. PLANNEDORDER_GETDETAIL01 does not exist, I want to make a ZPL
-
The white background makes my eyes hurt. How can I make the background a different color?
-
Help downloading Photoshop Elements 11
I've had me serial number for adobe photoshop elements 11 since christmas, but I've never known how to download it. Can anyone help me.