MIRO planned delivery cost and document reference

Hi
I create a purchase order with one position including the planned delivery with flag Indicator: GR-Based Invoice Verification. OK
I create the good receive with reference to purchase order: in Migo I update field xblnr Number of External Delivery Note. OK
I enter an invoice to reference to purchase order number including the planned delivery costs using transaction MIRO: SAP enter the document and in RSEG update 2 record: on first record (refer to material) the field rseg - LBRNR (material document GR) and the field rseg - XBLNR are update BUT on second position (refer planned delivery cost) the fiel rseg - LBRNR (material document GR) and the field rseg - XBLNR are missing.
I wanti to updat it. Is it possible?
TKS

Help me....

Similar Messages

MIRO-Planned delivery Cost

Hi,
We have made a PO where there is a problem with one of the wrong condition type(Transit Insurance) which does not have any secondary vendor assingement,but the condition type is having Account key (Other Clearing)
As the MIRO-Planned delivery Cost Conditions for Sec Vendors Such as
Basci Customs, Excise, octroi, are allready posted& the GR for this material is allredy done & the material is allready issued
the value which is lying in the other Clearing account needs to be settled as there is no vendor assingemnt to this condition type we are finding it difficult where to nullify this account
Please suggest what can be done

Hi
Now that you have already posted the Transit insurance amount , I suppose you are getting the amount against the material supply vendor. One way for you to settle the expenses is to use the JV - FB60 for this to remove the amoutn and reassign the other vendor in FI
Regards

Issue with reversal of MIRO for Planned Delivery Cost

Hi Xperts
We have found out an issue while reversing the MIRO document for Planned Del costs. When we have done the MIRO, the accounting entry got correctly posted with correct account keys.Conditions are not inventoried.
However, when we had reversed it - the stock account got hit.Do not understand, why that happened.Do you have any clue?
1. Suppose we have done the MIRO for Del Cost & then performed GR.Now Stock has already consumed & afterwards we have found that the MIRO for Del Cost is wrong & reverse - in this scenario shall the Stock account will get a hit????
2. I have maintained Price Control "V" in Material Master.However, I have maintained a Standard Price by mistake.In that case shall SAP ignores the MAP & takes Standard Price into account & post PRD??
Regards
Soumick

Hi,
Before checking Planned Delivery costs accounting documents in MIRO posting and MIRO cancellation document, 1st check how Planned Delivery costs designed for your procurement process.
Use t.code:ME23N, check your Purchase order
Option-1:
Is Planned Delivery costs added to inventory account and at the same time Planned Delivery costs posted to Separate Planned Delivery costs G/L account.
OR
Option-2:
Is Planned Delivery costs posted to Planned Delivery costs G/L account ONLY
OR
Option-3:
Is Planned Delivery costs added to inventory account ONLY.
Based the above one setting, system will post goods receipt and invoice posting document with corresponding accounting entries. Also cancellation of invoice posting document refer to these setting.But account posting depends on price control available in material master.
NOTE:
Standard price procedure (price control “S”):The system carries out all stock postings at a price defined in the material master. Variances in price are posted to price difference accounts.
Moving average price (price control “V”): The system valuates goods receipts with the purchase order price and goods issues with the current moving average price.Differences in price between the purchase order price and the invoice are posted directly to the relevant stock account if there is sufficient stock coverage.
Regards,
Biju K

Issue in MIRO for Planned Delivery Cost

Hi,
We are facing a problem during MIRO (Planned Delivery Cost)...
First, We create Two PO's with Freight Value (use diff. vendors in both PO). During MIRO (including both PO), we done Invoicing with Goods / Service Items...when we are trying to create MIRO of Freight value (Planned Delivery Cost)... a pop-up open for choose the Vendor...
Here, Issue is that only 2 Vendors should be there BUT there shows many vendors to choose..
Please guide, how to solve this...During MIRO only 2 vendor should appear in that pop-up window...
thanks

HI,
Here, Issue is that only 2 Vendors should be there BUT there shows many vendors to choose..
many vendor means how match all vendor list?
have you activate vendor partner function at your end ? if yes check following things
check vendor master record and check Invoicing party of that vendor ,also check invoice party of main vendor
you may get invoicing party of both vendor there
Regards
Kailas Ugale

Planned delivery cost(in PO), but like to pay other vendor(in MIRO). How?

To someone who knows planned delivery cost very well:
I have 3 points.
1. Planned delivery cost(in PO), but like to pay other vendor(in MIRO). How?
2. Condition type for Planned delivery cost, like FRA1, FRB1,ect, have Acc. key& Accrual key like FRE, FR1 in PO pricing procedure(calculation schema), it controls dlv cost value into Mat. stock value, but we like to post those value into a expense account, it is possible by cond. type FRA1 or FRB1, how?
3. I did testing, I have impression, for cond.type of planned dlv cost, FRA1 or FRB1, SAP always credits the dlv cost value into Accrual/provision clearing account(after GR) and debit to clear the account after MIRO. Is it correct? If yes, why in condition type configuration, it has an indicator Accrual , this indicator seems to have no difference whether it selected or non-selected.
Thanks,
[email protected]

1)while doing the miro,in the details tab give Inv. Party as ur other vendor code.
also at the right hand side where u can select the layout,just above it choose planned delivery cost and proceed with ur miro.
regards,
indranil

Return delivery and Planned delivery costs

Hi guru
scenario: I create a PO (Vendor A) with Planned delivery costs on order item.
I store planned delivery costs in the purchase order item on the Item conditions screen. ( I enter a different vendor for "freight vendor" - Vendor B, select the desired condition on the condition screen and choose Goto - Details. Overwrite the content of the Vendor field).
I create GR. OK
I create a return delivery (122) but I have to pay invoice for "freight vendor" to Vendor B.
Can I make it?

Hi,
At the time of GR;
Stock A/c - 110 - Dr
GR/IR Clearing - 100 - Cr
Freight Clearing - 10 - Cr
And when you return it then same entry gets reversed.
So at the time of MIRO, it will not propose the freight value automatically but you refer the PO and select "Planned delivery cost" and then under "GL Account" Tab, enter Freight Expense A/c - Dr and "Simulate", it will credit vendor and then Post

Planned delivery cost for the scheduling agreement

Hi Experts
1. I have an requirement to post Invoice ver. for the Planned delivery cost (freight,customs duty,CVD etc) against the Scheduling Agreement just like Import Purchases with checking off the GR Based IV Indicator before doing the GR
I tried it but its giving me that no delivery costs are Planned in the Scheduling agreements it runs fine in case of the PO because PO is a time independent. Please inform how to post the same for schedule agreement with time dependent indicator on. I tried switching off the time dependent indicator and the system allowed, but my requirement is to Post I.V for the delivery cost with the time dependent indicator on.
Appreciate if you can suggest something in this case Urgently .
2. Aother issue is we have some uploaded Scheduling agreement from legacy system with Time dependent conditions. For this we need to post planned delivery cost in Miro. Since the system is not allowing to post, how to about for this. Shall we enter the delivery cost in unplanned delivery cost in Miro and post. Please suggest if any alternate solution is available.
Regards
Arvind

Hi,
As you know if the delivery cost document is not posted during GR the
delivery cost is not proposed during invoice (MIRO). Planned delivery
cost will be proposed in invoice only when there are records in EKBZ
table. The EKBZ table will be updated when delivery cost is posted
during GR itself.
Please ensure in the PO itself thatr the conditions have been defined
properly with the relevant amounts and values.
During GR when planned delivery cost conditions are present in PO,
system checks for values in amount field. Then only appropriate
calculations will be done for delivery cost and planned delivery cost
document will posted during GR and hence updates EKBZ table.
Solution to this issue is described in below steps,
1) reverse the invoice document
2) reverse GR document.
3) You have to give values in amount field in relevant conditions ZGDS
   in the PO.
   If you face any issues changing the values, delete above conditions
   and put it again manually and give values in amount field also.
4) Post GR once again, delivery cost document will also be posted.
   You can check it in PO history.
5) During invoice select Item + planned delivery cost and post the
   invoice. If you need planned delivery cost to be posted separately,
   then you can post individual invoice for item and delivery cost.
Please note it is not possible to post delivery costs for documents with
multiple accountassignments.
For your second question, I am afraid I can not answer. Please open a new ntry in the forum, so that someone else can answer it.
Best Regards,
Arminda Jack

Planned delivery cost payed before GR

Hi all experts,
We are analyzing to use transportation for planned delivery costs and freight.
We will have multiple legs (steps) in a route and let's say that the end to end transport will take approximately 30 days to complete but we would like to pay for some of the legs (transport) that have already occurred.
So the question is: is it possible to post planned cost for the entire route and pay for them in parts before the GR? Is there any restriction that we should take into consideration?
Thanks in advance

Hi,
you can not change or introduce delivery cost after gr, partial gr. However you can add new condition for insurance after gr.
regards
Ishu

Plan delivery cost

Dear All,
I have posted an invoice for plan delivery cost and than i've done GR (in case of foreign purchase orders). The vendor has again send an invoice for some more delivery cost and i've done another invoice with the said amount (not subsequent debit) in this case system has posted some amount to price difference account. And the delivery cost is accural and can be a part of material tell me how to make that impact on material cost as i've also issued the quantity for production. Tell me how to make that amount posted to price difference account as part of material now.
Regards
Mew

>
Mewithmy wrote:
> Dear All,
>
> I have posted an invoice for plan delivery cost and than i've done GR (in case of foreign purchase orders). The vendor has again send an invoice for some more delivery cost and i've done another invoice with the said amount (not subsequent debit) in this case system has posted some amount to price difference account. And the delivery cost is accural and can be a part of material tell me how to make that impact on material cost as i've also issued the quantity for production. Tell me how to make that amount posted to price difference account as part of material now.
>
> Regards
> Mew
What comes to my mind is to reverse the second invoice through MR8M or subsequent credit. Then post the second amount as subsequent debit and that should meet your requirement.

Condition category B,F and planned delivery cost indicator in MIRO

hi,
i would like to clarify the linking between condtion category and planned delivery cost indicator in MIRO.
1) if in PO, i have condition type where category is B(delivery cost) or F(freight), then during GR, system will credit freight/customs clearing account. subsequently in MIRO, i have to choose planned delivery cost indicator when create invoice, correct?
2) if my PO has no condition type where category is B or F, i do not have to choose planned delivery cost indicator during MIRO as no freight/customs clearing account to be set off. correct?
thanks

Hi Eliana,
I think you are on right track.

MIRO: Delivery note and Planned Delivery Costs

Hi experts,
I'm trying to register planned delivery cost starting from the delivery note selection in MIRO.
The reason is that i usually have many GR of the same PO and i want to register the correct delivery cost only for the material that i have actually received.
How and where could I work to set the correct solution? (price conditions maybe)
Any help is appreciated.
Warm Regards,
Pierluigi

go to miro
select the planeed delivery layout variant and select the po or delivery note for the refrence
i sugget u to mark the gr based iv check box in po and then do the miro so that system will suggest the values for the specific delivery of material in miro

Problem with MIRO Transaction while posting Un planned Delivery cost

Hi all,
We have entered all the details including unplanned delivery cost in transaction MIRO. When we are trying to post the same by using post button directly with out simulation, system is asking for plant details.
For first time we have entered wrong Plant details , system immediately asking again for plant details.
Next time even if we entered correct plant details, the system is coming out from the screen MIRO and it is not posting the document.
If you go through simulate button and it is working fine and it is giving Warning message, If we enter the wrong Plant details.
My Client requirement is If we post the MIRO transaction including Un planned delivery cost with Post button. If we enter wrong plant details. System will through Error message, until we enter the correct plant details.
Is there any way to do this. Pl help me in this regard.
Regards,
Ramesh

In the MIRO T Code, U can see PO reference tab is there, Just below it there is Purchase order/scheduling agreement field is there . enter the purchase order number in blank field next to Purchase order/scheduling agreement and press enter. U can see it will take the required data automatically.
hope this helps
regards

How to know miro is planned delivery cost

hi,
any where to check eg table or report, can tell the miro posted document is for planned delivery cost.
i think most of us notice that if display miro posted document, the indicator not there. only during edit or create, indicator is there.
indicator means the goods/service item, planned delivery cost or both.
now i need to check miro posted for planned delivery cost. if ask me to check PO in miro line item, i think that would be very difficult to track.
please help.
thanks

Hi Dear,
You need to maintain the Account Key for the condition type in the Pricing Procedure.
and then for the same key maintain the GL account in the OBYC settings.
Hope it helps you.
Regards,
Yawar Khan

Planned delivery cost in MIRO

I have a PO. I have entered the freight condition as FRA1. The vendor for the condition is specified at the time of the GR. I create mnultiple GR for the PO line Item.
When I book the MIRO for the planned delivery cost the system does not propose the quantity and the amount. The GR based verification is checked in the vendor master data.
Please suggest me a way to do this? or is it a standard system.

Hi,
Please check if condition is defined in M/06 ,ACCRUALS option should be ticked - otherwise system will not create any seprate delivery cost document in system at the time of GR. Check Purchase Order History,seprate delivery cost should be appeared against the Purchase Order History
Also check ,in Pricing Procedure (m/08) ,accrual key should be available against delivery condition.
Or else check at the time of MIRO,Goods Items/ Delivery cost/both option should be selected.
Hope this will be helpful to you.
Thanks & Regards,
Sandesh Sawant

Planned Delivery Cost in MIRO for different freight vendor

Hi,
Kindly share, how to get rid of above issue:
1) PO created with a freight condition (FRA1 with a different vendor assigned to it under item conditions tab)
2) GR done, & all accounting entries were OK, (including freight costs in FR1 or FR3)
3) while doing MIRO with selection Planned-Delivery-Cost, Amount & Qty fields are "Blank" and auto flowing from Clearing A/cs
I found this error in both Domestic or Import POs.
I've read many threads, but could not find a clear solutions for the same.
Plz help
Sankar

Hi,
Plz find screens.
Amount & Qty fields not flowing in MIRO from open GRIR/clearing account balance.

MIRO planned delivery cost and document reference

Similar Messages

Maybe you are looking for