"Mirror Display Button" like the original MacBook Pro?

ok long story short, my friend has one of the old 17" macbook pros and the screen died. We hooked up an external display, but had some problems getting it to work at first. (we could get a picture, but it was in extend mode, so the mac desktop was on the cracked screen that we could not see, and the monitor was just a picture of his wallpaper. I then found that if you push the (I think it was the F7 key) it would toggle the display from extend mode to mirror mode which gave us the desktop on the other monitor. We could then go into system prefes and set the correct resolution etc.
My question is, The new MacBook's and MacBook Pro's do not have this key. The only way to toggle modes is from within system prefs. But what if my screen died like his? Without the button to toggle my display, how would I be able to switch the mode if the desktop comes up on the macbook screen, and that screen is unusable?
Although no one probably ever uses that button, I can see it nice to have if you ever ended up in a case like my friend where we needed to switch modes, but could not see the screen.
Although there is not a button for this function, is there some time of hotkey or something that might do this? What does Apple recommend in this situation?
Regards,
Scott

iVmichael wrote:
Try command-F1 ?
Thanks! That works! Never knew you could do that!
PS: would you happen to know an equivalent of the F8 key on the old MacBook Pros? (the one that turned the backlit keyboard on and off?) I know you can do the same thing by holding the F5 key down until it shuts off, and then F6 to turn it on, but I wish I could have a one button solution like the old pros.

Similar Messages

  • HT4889 If I use this migration  by ethernet from a macbook pro to an imac will the original macbook pro still have the original data

    If I use this migration  by ethernet from a macbook pro to an imac will the original macbook pro still have the original data

    Yes.

  • Can I turn off the retina display feature on the new MacBook Pro?

    Hello,
    I recently got the new MacBook Pro with Retina display. I love how fast this machine performs, it's weight and thickness.
    However, working in Advertisement, this machine's made my line of work a bit too pixelated. There are no websites optimized for this new display, making portfolios hard to see as the retina screen makes things blurry and fussy looking. Not only that, but non of the Adobe products are ready for this technology either. It's hard to open a piece of software you'd like to design with and work with pixelated tools (photoshop among others).
    I can do without the Ethernet port, optical drive and the lack of a locking system for this machine. But, making things uglier on the web isn't something I'm willing to sacrifice since is my line of work. Any idea of a third party that can turn this feature off?
    Any help would be greatly appreciated. Otherwise, this beauty is going back to the Apple store.

    sorry, but the 2880x1800 is hardware; in fact what makes non-optimized sites look (relativly) ugly is that to upscale the graphics to the apparent resolution of everything else each pixel is represented by 4 pixels, and as you know being in graphics, upscaling pictures is generally results in ugly. 
    Back to my point, there's no software to make the display lose 75% of its pixels; you'll either have to use another machine and/or wait for sites to optomize their graphics for the retina displays...which may or may never happen depending on the sites awareness/closeness with Apple's technology

  • How do I download and install Lightroom 5 on a new MacBook Pro, as I have replaced the original MacBook Pro that it was installed on when I purchased it 9 months ago?

    I purchased - downloaded and installed Lightroom 5 on my old Macbook Pro in June, 2014.  I have since replaced that computer with a new Macbook Pro.  I uninstalled Lightroom from that computer.  I would like to download Lightroom 5 onto my new computer, but none of the codes I have are working.  How can I download it without having to re-purchase it?

    You can look here
    Adobe - Lightroom : For Macintosh

  • How do you like the new macbook pro?

    I got a new macbook pro on monday this week. I just found a few of questions, but it was okay. Before I've already changed computers for many times or just went to apple store to ask what problem this computer had. Now I feel a little bit tired to go again. I have always asked myself. Do I really need to buy Apple or buy another brand PC. So, I want to know what you guys think?

    I picked mine up on the day they were released. The only issue I have had is two freezes and one strange sound during one of the freezes. But, I have had no issues in the past two weeks so I'm very happy. I will admit that this is the first glossy display I have owned in the fourteen years I've had a computer and it takes some getting used to.
    Rather than going into the Apple Store to ask a question, perhaps posting a specific question here may help. I've read about problems people are having with the updated MB and MBP but Apple seems to be trying to fix these issues quickly.

  • Final Cut Studio 5 and the Original MacBook Pro compatable?

    Please help a frustrated old pro. I bought a MacBook Pro when they first came out, had it configured with a Quartz Extreme video card and upgraded Final Cut Production Suite to Final Cut Studio. I use Digital Juice products too. I just cannot get anything to work right - it shuts down, hangs up, is super super unbelieveably slow.....I took it in the local Apple store and they told me everything was fine but it can't be. This is my 3rd Mac - I've always loved them but this one doesn't work at all. My LaCie drives are so slow with it as well. What would you suggest I do? Thank you for your response!
    MacBook Pro   Mac OS X (10.4.9)   Quartz Extreme Video Card

    You Macbook Pro is Intel processor based. The first version of FCP 5, part of Final Cut Studio 1 was Power PC based up until version 5.1.1 when they went universal. If you're trying to install FCP5 version 5.0.4 or earlier it won't work at all on your Intel based Macbook Pro. You need to upgrade to FCP 5.1 or later, which means sending in your FCS discs to Apple and they'll send you back the universal versions which will work on both the Intel and Power PC based platforms. Hope this makes sense.
    If you're using FCP 5.1.1 or later on your Macbook Pro but it's not working right then you need to provide more info about your system: Anything that will help to diagnose your problem. All things being equal, your Macbook Pro should certainly be able to run FCP 5.1.1 or later.
    - Don

  • Snow Leopard - Original MacBook Pro

    Will Snow Leopard work with the original MacBook Pro? If so, will all the new features of the operating system work with the equipment that the original MacBook Pro has (i.e. Intel Core 2 Duo, NVIDIA 8600, etc...)?
    Thank!
    Message was edited by: Michael710

    Snow Leopard will run on any Intel Mac. Sounds like you don't have an original MBP - those have Core Duo CPUs, which are 32-bit and can't use the advantages of the new 64-bit OS. If you have a Core 2 Duo MBP with an 8600 GPU, you will be able to use 64-bit processing and OpenCL (which uses the GPU for CPU-like processing) - so, in that case, yes the important features of SL will work for you.

  • Upgrading from Firewire 400 to 800 on Original Macbook Pro

    Is it possible to upgrade my original Macbook Pro Firewire 400 port to an 800 port? And will it perform at 800 on the original Macbook Pro?
    This is my situation:
    I will be recording on a Canon HD VIXIA HF S10 Dual Flash Memory Camcorder. You can record to an internal memory of 32GB or a 32GB removable SDHC card. The camcorder does not provide a Firewire port, only USB 2.0. I figure if I use the card to record on, I can then use a Firewire 800 card reader to transfer the large HD video file to the laptop, believing this would be considerably faster than the direct USB 2.0 from the camera (I could be wrong). I will edit the film and then save it to an external portable 800 Firewire hard drive for storage. I will be backpacking which means the weight, size, durability and speed all matter for this process. I am just trying to decide which setup is best for my camcorder, computer and external hard drives. Thanks.

    FireWire 800 can potentially be much faster than USB 2.0. It is that way with hard disks for sure.
    You cannot upgrade the port inside your machine. What you can do is get a FireWire 800 card like this one and stick it into your ExpressCard slot.

  • Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting Display on my mid 2012 MacBook Pro.

    Does OS Lion 10.7.5 support Airplay mirror of Apple TV 3? I can't find the option in Setting>Display on my mid 2012 MacBook Pro.
    I've rebooted all 3 devices, still does not work. Both Apple TV and MBP are on the same wifi. And the Apple TV AirPlay option is on. Can someone help? Thank you.

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Another solution is the Air Parrot.

  • Color fidelity and the New MacBook Pro glossy display like iMac

    I'm very concerned about the new MacBook Pro display which is glossy like the iMac. Can Apple guarantee precise Color fidelity and correct calibration for Pro users? Aren't glossy glass screens more saturated, deeper Blacks and higher contrasted. Aan Apple answer to this very important question that will draw or throw thousands of Professionals off the new Pro laptop.

    Sorry, your comments only confirm the post above. Below is a copy of a comment from Charles Higgins posted to Maintouch. I copied it for posting here (I hope that is legal).
    Charles Higgins
    To those who must work in bright, unshaded sunlight, Hoodman makes a pretty good reflection/glare 'hood' (sic) that does its job, except it's godawful ugly and bulky.
    To everyone else (designers, photogs, and image editors), who must often work in less than ideal outdoor and indoor environments with their MBP's (including the dreaded airline seat), I feel your pain. I do ALL of these jobs, professionally, am an Adobe Beta Tester, have a Cisco CCNE and independently consult for folks like The University of Massachusetts (all campuses), Smith College, Middlebury College, to name a few, on everything from spec'ing Video, Graphics, and Photography labs to deployment, training, etc...
    However - the MBP's screen, reflective though it may be, is my favorite laptop screen so far, and I've tried all brands for a long time. I've owned and professionally used, daily, Mac laptops/notebooks since Wall Street.
    If it's a deal-breaker to have a glossy screen, you need to re-examine your techniques for use- how you work, where you work, light sources, etc.- because it's a really good indicator of how accurately you perceive color, brightness and tonality accurately... in other words, under conditions that I get unacceptable glare and reflections on my new MBP's glossy screen (CTO 2.8, 320GB 7200 RPM, new 24" on order, DP to DVI adapter out to 30" Cinema Display in home office), I would be getting unacceptable 'light pollution' onto my matte 30" Cinema Display, or any number of CRT monitors I used professionally in days past (Sony Artisans, Barco, etc.), and that's a good barometer, to me, of whether I have a 'pure' viewing environment for critical color work. Just because one can eke out a good or acceptable image view on a matte LCD MBP screen, doesn't mean you should do color critical, submit billing to client work in that already compromised situation. The matte screen often delivers a 'false sense of security' to those folks who work professionally in graphics, video and image editing. I find, or create, an environment that I can work well in with regard to screen viewing, and that's where, matte LCD screen or Glossy, I can get the best results. If I cannot get that environment, I curse my lack of resourcefulness and do work that isn't color-critical, just as I would with any matte screen Mac notebook LCD. In my long experience, and comparing them to even midlevel CRT monitor screens (Mitsu Diamond Pro 22", etc.) is absolutely no contest. Matte screens have an unacceptably low contrast and brightness, and a more primitive rendering of fine tonal gradations and shadows to blacks. My 30" Cinema Display has some of these same shortcomings, of course - but to a far lesser degree. Still, those shortcomings are there, and for the same reasons. The new, DP equipped 24" Cinema Display is a piece of pro equipment that I look forward to immediately calibrating and putting to work immediately!
    The clients I've converted to MBP glossy screens because of the shortcomings of any laptop matte screen BTW, my new MBP has a noticeably better screen than the glossy one on my early 2008 MBP (LED backlit); I calibrated both with Gretag MacBeth calibration hardware. I have been able to hardware calibrate the newer MBP to a tighter tolerance.
    Got glare? That's a symptom you're gonna probably get less than accurate results from any screen. Having used matte LCD screens in Mac notebooks for many years, I'll take the new LED backlit glossy MBP screens over anything available so far.
    ----------------------------------------------------

  • I have an original MacBook Pro 17" It appears that the red is out of convergence. It is not the graphic card because it works fine with separate Monitor

    I have an original MacBook Pro 17" It appears that the red is out of convergence. It is not the graphic card because it works fine with separate Monitor

    Chrisj4203, thank you for your kind answer.
    I have done a lot of restores to the Iphone, and resets also.
    I;ve done holding both buttons as you sugested, but there is no signal appearing.
    I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
    I don;t knoe what todo.
    I have been trying for more than one mont.
    I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

  • What cable do I need in order to migrate from Macbook Pro (December 2008) to the new Macbook Pro with Retina display?

    It's driving me crazy; I have a firewire, but it isn't compatible with the ports on the new macbook pro with retina display.
    Thanks for your help!

    hanskra wrote:
    I wish to know from Apple,
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding. 
    You can either contact Apple Care since you are still under warranty or click on the "Contact Us" link at the bottom of this website. 

  • I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

    I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
    ******A true apple fan********

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • Can I use Final Cut Studio 2 on the latest macbook pro retina display?

    I'm planning on buying the 15" macbook pro retina display and was given Final cut studio 2 from a friend as he woudn`t use it.
    is it possible to install this program on the computer at all and successfully use it or can i upgrade to the newest version?

    Studio 2? FCP 6? No. Sorry, won't even install. It's 8 year old software...and Apple no longer supports it. 
    The latest version, FCP-X...costs $299. There is no upgrade cost. But once you buy it, every single update after that is free...given the history of past updates.  Note...it's very different from FCP 6. Completely different app.

  • My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

    My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
    since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

    I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

Maybe you are looking for

  • Help! AcroExchAVDoc.Open FileName, ""

    Hello, I use the below code to open the pdf files and print them out. It works well but I got a question here. When I use it under the Excel 2003 in the office, the Adobe window pops up (PDF file really opens). When I run this code under Excel 2007,

  • Save as failed to process this document. No file was created.

    I've had Adobe Acrobat XI installed on my computer since November of 2013 and had never had any problems with the 'Save As' function - I could save all kinds of PDFs to Word, Excel, Power Point -- whichever format I needed -- until yesterday. Now I a

  • HT201407 Problem with activation

    We're sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care.

  • How can I get the Spanish characters for my N97

    I need the spanish characters so I can send SMS in spanish...

  • Mail stuck on "updating color for message 10 of 11"

    - the above message just runs constantly. I have repaired permissions, restarted several times but Mail just sits and updates color. Does anyone know how I can deal with this? How do I find message 10 of 11? Should I delete it? Or are there other way