Mirror error? pacman failing to fetch xorg/alsa etc.
just did my second install of arch and pacman fails to fetch xorg and alsa etc. saying error: failed to open file /var/lib/pacman/(filename) I have no idea whats going on here, frist install worked fine. the only thing i can think of is maybe the mirror isnt working, I used ftp@dal, canada. any help is very much welcome
Trilby wrote:
OK, this was a very small step in the right direction: you posted the error ... but was that the actual error? Did it really say 'file A' from mirror A, or is that a shorthand you are using?
Either way I also asked for you to post your mirror list so we could see what you have done to it. I'm quite confident now the error is in your mirror list and/or pacman.conf. IF you post those files (the actual content of those files, not a description or interpretation of them) then and only then will anyone be able to help you.
how can i when i have no software installed? yes that is shorthand. and currently its failing on all files. i can hand type all these files in but it will take some time. if im missing something because im new, please say so.
Similar Messages
-
Pacman fails on package android-glass-gdk-19
Upon trying to run makepkg -s on this package https://aur.archlinux.org/packages/android-platform-19/
I encounter the following error:
[charles@cat android-glass-gdk-19]$ ls
PKGBUILD source.properties.xz
[charles@cat android-glass-gdk-19]$ makepkg -s
==> Making package: android-glass-gdk-19 xe22_r11-1 (Fri Feb 20 01:12:46 EST 2015)
==> Checking runtime dependencies...
==> Installing missing dependencies...
error: target not found: android-platform-19
==> ERROR: 'pacman' failed to install missing dependencies.
[charles@cat android-glass-gdk-19]$
perhaps anyone has any suggestions?Oh okay, perhaps there is a way around this? I can see that the android-platform-19 target is not found, how can I get pacman to install this?
I can tell by your shorthanded response I should perhaps take my question to the newbie corner? -
Failed to fetch metadata from web service
Hi,
I am trying to use a webservice in a model. My web service system is defined as http://<server>:50013/?wsdl
and i can find the web service in the find data tab.
When I drag the webservice to my model story board I get the following error message:
Failed to fetch metadata
Portal request failed due to: Operation {0} not found
Any help is highly appreciated.
Best regards,
JanSolved it. I tried to drag the data service directly into a layer. That did not work. When I drag it on to the storyboard and move it to a layer afterwards it works correctly.
-
In azure microsoft DEPLOYMENT FAILED while fetching the files from git
Hello there,
I am using windows azure service for deploying my website but it gets display error "DEPLOYMENT FAILED" while fetching the file from my git repository. Please suggest me.Hi David,
Thank you for your response,
I deployed it using git and now its completed but i have an anather question that is I have created the app in portal.azure.com and a mysql db, both the files and db are deployed but still I am getting error "You
do not have permission to view this directory or page."
Please suggest. -
Failed to fetch pluggable data source error
I'm getting this error when creating a report that is connecting to a DB2 table using jdbc. Report builder seems to connect to the database fine, however when I attempt to compile/run the report I get the following error -
'REP-4102: Failed to fetch pluggable data source.
java.lang.AbstractMethodError: COM/ibm/db2/jdbc/app/DB2ResultSet.getStatement'
I'm using the following in my jdbcpds.conf on my local machine.
<driver name = "ibm-db2"
subProtocol = "db2"
connectString = "subProtocol:databaseName"
class = "COM.ibm.db2.jdbc.app.DB2Driver"
connection = "oracle.reports.plugin.datasource.jdbcpds.JDBCConnectionHandling"
loginTimeout = "0">
</driver>
Has anyone experienced this issue or has some insight as to what I need to do to resolve this?
TIA
BrianDear Oracle Reports Team,
Can you please help me out ???
Need your help in this regard urgently.
Best Regards,
Ramakrishnan L
Dear Friends,
I am encountering the following the error while running the reports.
REP-4102: Failed to fetch pluggable data source.
java.lang.NumberFormatException: 75,000000
I am using an Express Query in this case.
The same report runs perfectly when connected to the NT server that has the reports server,Http server and the rdf file.The db that the reports uses is on the SOLARIS server.
But when I use the reports server,http server and the rdf file avaiable to me on the SOLARIS server with the db also now on the same machine it does not run and gives the error.
What could be the problem ?
Just to add more clarity below is the URL which I use to display the report
NT URL(This works perfectly)
http://sa560:7778/reports/rwservlet?server=rep_sa560&report=c:\DWHReports\Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&SUSR_NAME='oraexp'&PASSWORD='test'
SOLARIS URL(This does not work and gives the error)
http://172.20.128.199:7778/reports/rwservlet?server=rep_gosisvr&report=Man_Days_Spent.rdf&express_server="server=ora_ro_tcp:172.20.128.199/sl=-2/st=1/ct=0/st=1/"&destype=cache&desformat=htmlcss&OESHOST=172.20.128.199&USR_NAME='oraexp'&PASSWORD='test'
Regds,
Ramakrishnan L -
Database primary installs just fine for Lync 2013 - however fails instantly when trying to install mirror DB to mirror SQL Server. The account has dull domain admin, Enterprise admins, and schema admins. Full access to the share as well. I
get the following error:
InstallMirrorDatabaseCmdlet.StartMirroring
4/7/2014 10:38:56 AM
Failed
└
Error: DsRoleGetPrimaryDomainInformation failed with error "6BA".
▼ Details
└ Type: CannotGetDomainInfoException
└ ► Stack Trace
└
at Microsoft.Rtc.Management.ADConnect.NativeHelpers.NativeHelper.GetPrimaryDomainInformation(String server)
at Microsoft.Rtc.Management.Deployment.MirrorUtils.GetSqlServerAccount(String server, String instanceName)
at Microsoft.Rtc.Management.Deployment.TopologyParser.PopulateDatabasesForSqlInstance(ISqlInstance sqlInstance)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForMachine(IMachine machine)
at Microsoft.Rtc.Management.Deployment.TopologyParser.FindDatabasesForFqdn()
at Microsoft.Rtc.Management.Deployment.TopologyParser.GetDbListToMirror()
at Microsoft.Rtc.Management.Deployment.TopologyParser.get_DbInfoList()
at Microsoft.Rtc.Management.Deployment.InstallMirrorDatabaseCmdlet.StartMirroring()
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)
4/7/2014 10:38:58 AM
Error
└
Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.CannotGetDomainInfoException" "DsRoleGetPrimaryDomainInformation failed with error "6BA"."The issue could be a typo in the SQL server name or that the SQL server isn't allowing remote connections. If you run the Install-csmirrordatabase command from powershell you should see more details about the error.
Take a look at Doug Deitterick's blog: http://blogs.technet.com/b/dodeitte/archive/2013/03/05/issue-configuring-sql-mirroring-for-lync-server-2013-when-sql-witness-is-defined-but-not-available.aspx
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013. -
Ok, so I'm a newbie on Arch, but I've been using Linux for three years so...
My issue is that gnome-extra won't install via pacman. It failed to fetch the package libelf:
:: Retrieving packages from extra...
error: failed retrieving file 'libelf-0.8.10-3.1-x86_64.pkg.tar.gz'
.easynews.com : Not Found
warning: failed to retrieve some files from extra
error: failed to commit transaction (unexpected error)
Errors occured, no packages were upgraded.
Ok, I presume this is an error with easynews.com. First off I wgetted the source code for libelf 0.8.10, compiled and installed it, but it still gives me this same error. Probably not installed in the right path or something.
So now I'm wondering, how can I switch the mirror that pacman uses? Or how can I install libelf from source but in the right path?
TIAThanks for the info. Yes I know about the edit button, but I overuse it on other forums so I just made another post. It can get a bit cluttered, so I'll always edit from now on (what I used to do).
I can google this, but do you recommend any good UK mirrors?
In Ubuntu (my native distro, arch is in a vm), there's two official mirrors that I can see, the main one and the UK one. They never seem to have broken or missing packages, so I haven't had to worry about package mirrors yet.
How do I go about making pacman see that I already have it installed? In Debian (well, Ubuntu), I haven't had this problem. It seems to recognize all software in the /usr or /usr/local directories. I didn't think Arch would be very different, but it seems there are quite alot of things that are done in slightly different ways.
Thanks alot
PS. I have GNOME up and running, but it doesn't have all the standard software that comes with it, ie because I couldn't install gnome-extras.
PPS. I think Arch is a brilliant distro as you can basically do what you want with it and it's MUCH less bloated than Ubuntu. But Ubuntu is suited to both geeks and average Joe's if you ask me (not saying I'm an average Joe, I am certainly a Linux geek!). I might try resizing my Linux partition and making a small partition just for Arch so it doesn't have to run in a VM.
EDIT: I tried another mirror and it failed again, with the same package. Is this package obsolete or something?
Last edited by srynznfyra (2009-07-12 17:30:51) -
"error: command failed to execute correctly" on several packages
Last night, when I updated before shutting down, I got a few errors, as in the subject. As it was very late, I thought I'd pick it up today.
Unfortunately, the pacman log only lists one of the ones that failed as libgpg-error. The other one that I remember erroring was gawk. There were a few others, maybe four or five, but I couln't reliably recall them all, so won't guess.
Here's a new attempt to reinstall gawk with --debug. I did the same with libgpg-error and the error occurred at the same place, with very similar output, so I think the issue is the same for all failures.
debug: pacman v4.2.1 - libalpm v9.0.1
debug: parseconfig: options pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: usedelta (default 0.7)
debug: config: arch: x86_64
debug: config: verbosepkglists
debug: config: chomp
debug: config: SigLevel: Required
debug: config: SigLevel: DatabaseOptional
debug: config: SigLevel: TrustedOnly
debug: config: LocalFileSigLevel: Optional
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 78: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: config: new section 'xyne-x86_64'
debug: config: finish section 'xyne-x86_64'
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 91: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 100: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: config: new section 'infinality-bundle'
debug: config: finish section 'infinality-bundle'
debug: config: new section 'infinality-bundle-multilib'
debug: config: finish section 'infinality-bundle-multilib'
debug: config: new section 'infinality-bundle-fonts'
debug: config: finish section 'infinality-bundle-fonts'
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
debug: setup_libalpm called
debug: option 'logfile' = /var/log/pacman.log
debug: option 'gpgdir' = /etc/pacman.d/gnupg/
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: parseconfig: repo pass
debug: config: attempting to read file /etc/pacman.conf
debug: config: finish section '(null)'
debug: config: new section 'options'
debug: config: finish section 'options'
debug: config: new section 'core'
debug: config file /etc/pacman.conf, line 78: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'core'
debug: registering sync database 'core'
debug: database path for tree core set to /var/lib/pacman/sync/core.db
debug: "/var/lib/pacman/sync/core.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/core.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for core repoistory
debug: adding new server URL to database 'core': http://arch.tamcore.eu/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.one.com/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.gnomus.de/core/os/x86_64
debug: adding new server URL to database 'core': http://mirror.js-webcoding.de/pub/archlinux/core/os/x86_64
debug: adding new server URL to database 'core': http://archlinux.polymorf.fr/core/os/x86_64
debug: config: new section 'extra'
debug: config file /etc/pacman.conf, line 81: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'extra'
debug: registering sync database 'extra'
debug: database path for tree extra set to /var/lib/pacman/sync/extra.db
debug: "/var/lib/pacman/sync/extra.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/extra.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for extra repoistory
debug: adding new server URL to database 'extra': http://arch.tamcore.eu/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.one.com/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.gnomus.de/extra/os/x86_64
debug: adding new server URL to database 'extra': http://mirror.js-webcoding.de/pub/archlinux/extra/os/x86_64
debug: adding new server URL to database 'extra': http://archlinux.polymorf.fr/extra/os/x86_64
debug: config: new section 'xyne-x86_64'
debug: config: SigLevel: Required
debug: config: finish section 'xyne-x86_64'
debug: registering sync database 'xyne-x86_64'
debug: database path for tree xyne-x86_64 set to /var/lib/pacman/sync/xyne-x86_64.db
debug: GPGME version: 1.5.4
debug: GPGME engine info: file=/usr/bin/gpg2, home=/etc/pacman.d/gnupg/
debug: checking signature for /var/lib/pacman/sync/xyne-x86_64.db
debug: 1 signatures returned
debug: fingerprint: EC3CBE7F607D11E663149E811D1F0DC78F173680
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430676813
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: EC3CBE7F607D11E663149E811D1F0DC78F173680, Xyne. (key #3) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for xyne-x86_64 repoistory
debug: adding new server URL to database 'xyne-x86_64': http://xyne.archlinux.ca/repos/xyne
debug: config: new section 'community'
debug: config file /etc/pacman.conf, line 91: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'community'
debug: registering sync database 'community'
debug: database path for tree community set to /var/lib/pacman/sync/community.db
debug: "/var/lib/pacman/sync/community.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/community.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for community repoistory
debug: adding new server URL to database 'community': http://arch.tamcore.eu/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.one.com/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.gnomus.de/community/os/x86_64
debug: adding new server URL to database 'community': http://mirror.js-webcoding.de/pub/archlinux/community/os/x86_64
debug: adding new server URL to database 'community': http://archlinux.polymorf.fr/community/os/x86_64
debug: config: new section 'multilib'
debug: config file /etc/pacman.conf, line 100: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: finish section 'multilib'
debug: registering sync database 'multilib'
debug: database path for tree multilib set to /var/lib/pacman/sync/multilib.db
debug: "/var/lib/pacman/sync/multilib.db.sig" is not readable: No such file or directory
debug: sig path /var/lib/pacman/sync/multilib.db.sig could not be opened
debug: missing optional signature
debug: setting usage of 15 for multilib repoistory
debug: adding new server URL to database 'multilib': http://arch.tamcore.eu/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.one.com/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.gnomus.de/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://mirror.js-webcoding.de/pub/archlinux/multilib/os/x86_64
debug: adding new server URL to database 'multilib': http://archlinux.polymorf.fr/multilib/os/x86_64
debug: config: new section 'infinality-bundle'
debug: config: finish section 'infinality-bundle'
debug: registering sync database 'infinality-bundle'
debug: database path for tree infinality-bundle set to /var/lib/pacman/sync/infinality-bundle.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430276639
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle repoistory
debug: adding new server URL to database 'infinality-bundle': http://bohoomil.com/repo/x86_64
debug: config: new section 'infinality-bundle-multilib'
debug: config: finish section 'infinality-bundle-multilib'
debug: registering sync database 'infinality-bundle-multilib'
debug: database path for tree infinality-bundle-multilib set to /var/lib/pacman/sync/infinality-bundle-multilib.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle-multilib.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430087321
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle-multilib repoistory
debug: adding new server URL to database 'infinality-bundle-multilib': http://bohoomil.com/repo/multilib/x86_64
debug: config: new section 'infinality-bundle-fonts'
debug: config: finish section 'infinality-bundle-fonts'
debug: registering sync database 'infinality-bundle-fonts'
debug: database path for tree infinality-bundle-fonts set to /var/lib/pacman/sync/infinality-bundle-fonts.db
debug: checking signature for /var/lib/pacman/sync/infinality-bundle-fonts.db
debug: 1 signatures returned
debug: fingerprint: A9244FB5E93F11F0E975337FAE6866C7962DDE58
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430276566
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: A9244FB5E93F11F0E975337FAE6866C7962DDE58, bohoomil (dev key) <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
debug: setting usage of 15 for infinality-bundle-fonts repoistory
debug: adding new server URL to database 'infinality-bundle-fonts': http://bohoomil.com/repo/fonts
debug: config: new section '(null)'
debug: config: finished parsing /etc/pacman.conf
debug: loading package cache for repository 'core'
debug: opening archive /var/lib/pacman/sync/core.db
debug: added 208 packages to package cache for db 'core'
debug: adding package 'gawk'
debug: loading package cache for repository 'local'
debug: added 1122 packages to package cache for db 'local'
warning: gawk-4.1.2-1 is up to date -- reinstalling
debug: adding package gawk-4.1.2-1 to the transaction add list
resolving dependencies...
debug: resolving target's dependencies
debug: started resolving dependencies
debug: checkdeps: package gawk-4.1.2-1
debug: finished resolving dependencies
looking for conflicting packages...
debug: looking for conflicts
debug: check targets vs targets
debug: check targets vs targets
debug: check targets vs db and db vs targets
debug: check targets vs db
debug: check db vs targets
debug: checking dependencies
debug: checkdeps: package gawk-4.1.2-1
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: setting download size 0 for pkg gawk
debug: sorting by dependencies
debug: started sorting dependencies
debug: sorting dependencies finished
Package (1) Old Version New Version Net Change
core/gawk 4.1.2-1 4.1.2-1 0.00 MiB
Total Installed Size: 2.19 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
debug: using cachedir: /var/cache/pacman/pkg/
debug: using cachedir: /var/cache/pacman/pkg/
checking keyring...
debug: looking up key 771DF6627EDF681F locally
debug: key lookup success, key exists
checking package integrity...
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: sig data: iQEcBAABCAAGBQJVQNc+AAoJEHcd9mJ+32gfQZgH/jkRiirmPTb4nE0xgcFGKc8wrxw3k9ooGyMFoeqAthTICB/5dBzNfEQ8b4X74gi8KiYQVYm4WE8kWIidUj5ekJhGwngO6Gk+lwyBq+Uh8rUHDJKw557fImM2bBah2lxNUxqZzxYTA1FByq2lptLB5EPJgAPemyUXACMXITDfqtWMpuHIEPLZi5WW9+cB0eMKz5IeEEfZi4lO2fyfRqxNkRDNSmC5NEDkfhm+XVXBEd4gugSOmYpKzlA67mjw2HP+oOyNheL8st4SjgFr/qVDdbfiBbaTTujC4mF1n73z5qp4K5/xgHqk42ftoo003XFQYVOAg3bDWMvUF5d63D4+HKg=
debug: checking signature for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: 1 signatures returned
debug: fingerprint: 5B7E3FB71B7F10329A1C03AB771DF6627EDF681F
debug: summary: valid
debug: summary: green
debug: status: Success
debug: timestamp: 1430312766
debug: exp_timestamp: 0
debug: validity: full; reason: Success
debug: key: 5B7E3FB71B7F10329A1C03AB771DF6627EDF681F, Tobias Powalowski <[email protected]>, owner_trust unknown, disabled 0
debug: signature is valid
debug: signature is fully trusted
loading package files...
debug: found cached pkg: /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: replacing pkgcache entry with package file for target gawk
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: starting package load for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: found mtree for package /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz, getting file list
debug: finished mtree reading for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: sorting package filelist for /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
checking for file conflicts...
debug: looking for file conflicts
debug: searching for file conflicts: gawk
debug: searching for filesystem conflicts: gawk
checking available disk space...
debug: checking available disk space
debug: discovered mountpoint: /tmp
debug: discovered mountpoint: /sys/kernel/security
debug: discovered mountpoint: /sys/kernel/debug
debug: discovered mountpoint: /sys/kernel/config
debug: discovered mountpoint: /sys/fs/pstore
debug: discovered mountpoint: /sys/fs/cgroup/systemd
debug: discovered mountpoint: /sys/fs/cgroup/net_cls
debug: discovered mountpoint: /sys/fs/cgroup/memory
debug: discovered mountpoint: /sys/fs/cgroup/freezer
debug: discovered mountpoint: /sys/fs/cgroup/devices
debug: discovered mountpoint: /sys/fs/cgroup/cpuset
debug: discovered mountpoint: /sys/fs/cgroup/cpu,cpuacct
debug: discovered mountpoint: /sys/fs/cgroup/blkio
debug: discovered mountpoint: /sys/fs/cgroup
debug: discovered mountpoint: /sys
debug: discovered mountpoint: /run/user/1000
debug: discovered mountpoint: /run
debug: discovered mountpoint: /proc/sys/fs/binfmt_misc
debug: discovered mountpoint: /proc
debug: discovered mountpoint: /home/skanky/personal
debug: discovered mountpoint: /home
debug: discovered mountpoint: /dev/shm
debug: discovered mountpoint: /dev/pts
debug: discovered mountpoint: /dev/mqueue
debug: discovered mountpoint: /dev/hugepages
debug: discovered mountpoint: /dev
debug: discovered mountpoint: /
debug: loading fsinfo for /
debug: partition /, needed 0, cushion 5121, free 1174711
debug: installing packages
reinstalling gawk...
debug: reinstalling package gawk-4.1.2-1
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: extracting: .INSTALL
debug: removing old package first (gawk-4.1.2-1)
debug: removing 110 files
debug: unlinking /usr/share/man/man3/time.3am.gz
debug: unlinking /usr/share/man/man3/rwarray.3am.gz
debug: unlinking /usr/share/man/man3/revtwoway.3am.gz
debug: unlinking /usr/share/man/man3/revoutput.3am.gz
debug: unlinking /usr/share/man/man3/readfile.3am.gz
debug: unlinking /usr/share/man/man3/readdir.3am.gz
debug: unlinking /usr/share/man/man3/ordchr.3am.gz
debug: unlinking /usr/share/man/man3/inplace.3am.gz
debug: unlinking /usr/share/man/man3/fork.3am.gz
debug: unlinking /usr/share/man/man3/fnmatch.3am.gz
debug: unlinking /usr/share/man/man3/filefuncs.3am.gz
debug: keeping directory /usr/share/man/man3/ (contains files)
debug: unlinking /usr/share/man/man1/igawk.1.gz
debug: unlinking /usr/share/man/man1/gawk.1.gz
debug: keeping directory /usr/share/man/man1/ (contains files)
debug: keeping directory /usr/share/man/ (contains files)
debug: unlinking /usr/share/locale/vi/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/vi/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/vi/ (contains files)
debug: unlinking /usr/share/locale/sv/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/sv/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/sv/ (contains files)
debug: unlinking /usr/share/locale/pl/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/pl/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/pl/ (contains files)
debug: unlinking /usr/share/locale/nl/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/nl/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/nl/ (contains files)
debug: unlinking /usr/share/locale/ms/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ms/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ms/ (contains files)
debug: unlinking /usr/share/locale/ja/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ja/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ja/ (contains files)
debug: unlinking /usr/share/locale/it/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/it/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/it/ (contains files)
debug: unlinking /usr/share/locale/fr/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/fr/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/fr/ (contains files)
debug: unlinking /usr/share/locale/fi/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/fi/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/fi/ (contains files)
debug: unlinking /usr/share/locale/es/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/es/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/es/ (contains files)
debug: unlinking /usr/share/locale/de/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/de/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/de/ (contains files)
debug: unlinking /usr/share/locale/da/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/da/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/da/ (contains files)
debug: unlinking /usr/share/locale/ca/LC_MESSAGES/gawk.mo
debug: keeping directory /usr/share/locale/ca/LC_MESSAGES/ (contains files)
debug: keeping directory /usr/share/locale/ca/ (contains files)
debug: keeping directory /usr/share/locale/ (contains files)
debug: unlinking /usr/share/info/gawkinet.info.gz
debug: unlinking /usr/share/info/gawk.info.gz
debug: keeping directory /usr/share/info/ (contains files)
debug: unlinking /usr/share/awk/zerofile.awk
debug: unlinking /usr/share/awk/walkarray.awk
debug: unlinking /usr/share/awk/strtonum.awk
debug: unlinking /usr/share/awk/shellquote.awk
debug: unlinking /usr/share/awk/round.awk
debug: unlinking /usr/share/awk/rewind.awk
debug: unlinking /usr/share/awk/readfile.awk
debug: unlinking /usr/share/awk/readable.awk
debug: unlinking /usr/share/awk/quicksort.awk
debug: unlinking /usr/share/awk/processarray.awk
debug: unlinking /usr/share/awk/passwd.awk
debug: unlinking /usr/share/awk/ord.awk
debug: unlinking /usr/share/awk/noassign.awk
debug: unlinking /usr/share/awk/libintl.awk
debug: unlinking /usr/share/awk/join.awk
debug: unlinking /usr/share/awk/inplace.awk
debug: unlinking /usr/share/awk/group.awk
debug: unlinking /usr/share/awk/gettime.awk
debug: unlinking /usr/share/awk/getopt.awk
debug: unlinking /usr/share/awk/ftrans.awk
debug: unlinking /usr/share/awk/ctime.awk
debug: unlinking /usr/share/awk/cliff_rand.awk
debug: unlinking /usr/share/awk/bits2str.awk
debug: unlinking /usr/share/awk/assert.awk
debug: keeping directory /usr/share/awk/ (in new package)
debug: keeping directory /usr/share/ (contains files)
debug: unlinking /usr/lib/gawk/time.so
debug: unlinking /usr/lib/gawk/testext.so
debug: unlinking /usr/lib/gawk/rwarray.so
debug: unlinking /usr/lib/gawk/revtwoway.so
debug: unlinking /usr/lib/gawk/revoutput.so
debug: unlinking /usr/lib/gawk/readfile.so
debug: unlinking /usr/lib/gawk/readdir.so
debug: unlinking /usr/lib/gawk/ordchr.so
debug: unlinking /usr/lib/gawk/inplace.so
debug: unlinking /usr/lib/gawk/fork.so
debug: unlinking /usr/lib/gawk/fnmatch.so
debug: unlinking /usr/lib/gawk/filefuncs.so
debug: keeping directory /usr/lib/gawk/ (in new package)
debug: unlinking /usr/lib/awk/pwcat
debug: unlinking /usr/lib/awk/grcat
debug: keeping directory /usr/lib/awk/ (in new package)
debug: keeping directory /usr/lib/ (contains files)
debug: unlinking /usr/include/gawkapi.h
debug: keeping directory /usr/include/ (contains files)
debug: unlinking /usr/bin/igawk
debug: unlinking /usr/bin/gawk-4.1.2
debug: unlinking /usr/bin/gawk
debug: unlinking /usr/bin/awk
debug: keeping directory /usr/bin/ (contains files)
debug: keeping directory /usr/ (contains files)
debug: removing database entry 'gawk'
debug: removing entry 'gawk' from 'local' cache
debug: extracting files
debug: opening archive /var/cache/pacman/pkg/gawk-4.1.2-1-x86_64.pkg.tar.xz
debug: skipping extraction of '.PKGINFO'
debug: extracting /var/lib/pacman/local/gawk-4.1.2-1/install
debug: extracting /var/lib/pacman/local/gawk-4.1.2-1/mtree
debug: extract: skipping dir extraction of /usr/
debug: extract: skipping dir extraction of /usr/lib/
debug: extract: skipping dir extraction of /usr/share/
debug: extract: skipping dir extraction of /usr/include/
debug: extract: skipping dir extraction of /usr/bin/
debug: extracting /usr/bin/igawk
debug: extracting /usr/bin/awk
debug: extracting /usr/bin/gawk-4.1.2
debug: extracting /usr/bin/gawk
debug: extracting /usr/include/gawkapi.h
debug: extract: skipping dir extraction of /usr/share/locale/
debug: extract: skipping dir extraction of /usr/share/awk/
debug: extract: skipping dir extraction of /usr/share/info/
debug: extract: skipping dir extraction of /usr/share/man/
debug: extract: skipping dir extraction of /usr/share/man/man3/
debug: extract: skipping dir extraction of /usr/share/man/man1/
debug: extracting /usr/share/man/man1/gawk.1.gz
debug: extracting /usr/share/man/man1/igawk.1.gz
debug: extracting /usr/share/man/man3/filefuncs.3am.gz
debug: extracting /usr/share/man/man3/fnmatch.3am.gz
debug: extracting /usr/share/man/man3/fork.3am.gz
debug: extracting /usr/share/man/man3/inplace.3am.gz
debug: extracting /usr/share/man/man3/ordchr.3am.gz
debug: extracting /usr/share/man/man3/readdir.3am.gz
debug: extracting /usr/share/man/man3/readfile.3am.gz
debug: extracting /usr/share/man/man3/revoutput.3am.gz
debug: extracting /usr/share/man/man3/revtwoway.3am.gz
debug: extracting /usr/share/man/man3/rwarray.3am.gz
debug: extracting /usr/share/man/man3/time.3am.gz
debug: extracting /usr/share/info/gawk.info.gz
debug: extracting /usr/share/info/gawkinet.info.gz
debug: extracting /usr/share/awk/zerofile.awk
debug: extracting /usr/share/awk/walkarray.awk
debug: extracting /usr/share/awk/strtonum.awk
debug: extracting /usr/share/awk/shellquote.awk
debug: extracting /usr/share/awk/round.awk
debug: extracting /usr/share/awk/rewind.awk
debug: extracting /usr/share/awk/readfile.awk
debug: extracting /usr/share/awk/readable.awk
debug: extracting /usr/share/awk/quicksort.awk
debug: extracting /usr/share/awk/processarray.awk
debug: extracting /usr/share/awk/ord.awk
debug: extracting /usr/share/awk/noassign.awk
debug: extracting /usr/share/awk/libintl.awk
debug: extracting /usr/share/awk/join.awk
debug: extracting /usr/share/awk/inplace.awk
debug: extracting /usr/share/awk/gettime.awk
debug: extracting /usr/share/awk/getopt.awk
debug: extracting /usr/share/awk/ftrans.awk
debug: extracting /usr/share/awk/ctime.awk
debug: extracting /usr/share/awk/cliff_rand.awk
debug: extracting /usr/share/awk/bits2str.awk
debug: extracting /usr/share/awk/assert.awk
debug: extracting /usr/share/awk/group.awk
debug: extracting /usr/share/awk/passwd.awk
debug: extract: skipping dir extraction of /usr/share/locale/vi/
debug: extract: skipping dir extraction of /usr/share/locale/sv/
debug: extract: skipping dir extraction of /usr/share/locale/pl/
debug: extract: skipping dir extraction of /usr/share/locale/nl/
debug: extract: skipping dir extraction of /usr/share/locale/ms/
debug: extract: skipping dir extraction of /usr/share/locale/ja/
debug: extract: skipping dir extraction of /usr/share/locale/it/
debug: extract: skipping dir extraction of /usr/share/locale/fr/
debug: extract: skipping dir extraction of /usr/share/locale/fi/
debug: extract: skipping dir extraction of /usr/share/locale/es/
debug: extract: skipping dir extraction of /usr/share/locale/de/
debug: extract: skipping dir extraction of /usr/share/locale/da/
debug: extract: skipping dir extraction of /usr/share/locale/ca/
debug: extract: skipping dir extraction of /usr/share/locale/ca/LC_MESSAGES/
debug: extracting /usr/share/locale/ca/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/da/LC_MESSAGES/
debug: extracting /usr/share/locale/da/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/de/LC_MESSAGES/
debug: extracting /usr/share/locale/de/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/es/LC_MESSAGES/
debug: extracting /usr/share/locale/es/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/fi/LC_MESSAGES/
debug: extracting /usr/share/locale/fi/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/fr/LC_MESSAGES/
debug: extracting /usr/share/locale/fr/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/it/LC_MESSAGES/
debug: extracting /usr/share/locale/it/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/ja/LC_MESSAGES/
debug: extracting /usr/share/locale/ja/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/ms/LC_MESSAGES/
debug: extracting /usr/share/locale/ms/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/nl/LC_MESSAGES/
debug: extracting /usr/share/locale/nl/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/pl/LC_MESSAGES/
debug: extracting /usr/share/locale/pl/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/sv/LC_MESSAGES/
debug: extracting /usr/share/locale/sv/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/share/locale/vi/LC_MESSAGES/
debug: extracting /usr/share/locale/vi/LC_MESSAGES/gawk.mo
debug: extract: skipping dir extraction of /usr/lib/gawk/
debug: extract: skipping dir extraction of /usr/lib/awk/
debug: extracting /usr/lib/awk/pwcat
debug: extracting /usr/lib/awk/grcat
debug: extracting /usr/lib/gawk/filefuncs.so
debug: extracting /usr/lib/gawk/fnmatch.so
debug: extracting /usr/lib/gawk/fork.so
debug: extracting /usr/lib/gawk/inplace.so
debug: extracting /usr/lib/gawk/ordchr.so
debug: extracting /usr/lib/gawk/readdir.so
debug: extracting /usr/lib/gawk/readfile.so
debug: extracting /usr/lib/gawk/revoutput.so
debug: extracting /usr/lib/gawk/revtwoway.so
debug: extracting /usr/lib/gawk/rwarray.so
debug: extracting /usr/lib/gawk/testext.so
debug: extracting /usr/lib/gawk/time.so
debug: updating database
debug: adding database entry 'gawk'
debug: writing gawk-4.1.2-1 DESC information back to db
debug: writing gawk-4.1.2-1 FILES information back to db
debug: adding entry 'gawk' in 'local' cache
debug: executing ". /tmp/alpm_r21DA5/.INSTALL; post_upgrade 4.1.2-1 4.1.2-1"
debug: executing "/usr/bin/bash" under chroot "/"
debug: call to waitpid succeeded
error: command failed to execute correctly
debug: running ldconfig
debug: executing "/usr/bin/ldconfig" under chroot "/"
debug: call to waitpid succeeded
debug: unregistering database 'local'
debug: freeing package cache for repository 'local'
debug: unregistering database 'core'
debug: freeing package cache for repository 'core'
debug: unregistering database 'extra'
debug: unregistering database 'xyne-x86_64'
debug: unregistering database 'community'
debug: unregistering database 'multilib'
debug: unregistering database 'infinality-bundle'
debug: unregistering database 'infinality-bundle-multilib'
debug: unregistering database 'infinality-bundle-fonts'
pacman thinks the upgrade/reinstall was successful in that the latest version is installed.
I did a search on the forums and the only other issue that I thought was connected might be microcode not up to date, but I had followed the update instructions some time back and as far as I can tell, the microcode is up to date.
I have two main questions:
1) How do I work out what's causing the error, from above?
2) Is there a way I can work out which packages gave the error, so I can make sure they're installed properly?
Thanks.The following packages also had problems
( 2/17) upgrading glibc
error: command failed to execute correctly
( 3/17) upgrading binutils
error: command failed to execute correctly
( 4/17) upgrading coreutils
error: command failed to execute correctly
( 8/17) upgrading gcc
error: command failed to execute correctly
( 9/17) upgrading gcc-fortran
error: command failed to execute correctly
(10/17) upgrading gcc-libs
error: command failed to execute correctly
Does anybody have a clue?
Thanks, -
Seem to be in mirror and pacman hell
Hi,
reinstalled arch, with 5/1/12 core 32 bit disk with KDE4 but despite enabling an Australian mirror could only get [core remote extra remote community remote] at first for the install.
However now this has all disappeared since upgrading and pacman seems broken plus the mirrorlist seems kaput also.
I wonder if anyone has any idea what to do or is it a reinstall again.
Here are the files and terminal comments but no luck figuring this out to fix this.
Regards
El Zorro
[root@myhost ]# pacman -Syu
:: Synchronizing package databases...
error: failed to update core (no servers configured for repository)
error: failed retrieving file 'extra.db' from mirror.aarnet.edu.au : File unavailable (e.g., file not found, no access)
error: failed to update extra (File unavailable (e.g., file not found, no access))
error: failed retrieving file 'community.db' from mirror.aarnet.edu.au : File unavailable (e.g., file not found, no access)
error: failed to update community (File unavailable (e.g., file not found, no access))
error: failed to synchronize any databases
[root@myhost]#
root@myhost ]# pacman -Syu (aarnnet repo # hashed)
:: Synchronizing package databases...
error: failed to update core (no servers configured for repository)
error: failed to update extra (no servers configured for repository)
error: failed to update community (no servers configured for repository)
error: failed to synchronize any databases
[root@myhost ]#
/etc/pacman.d/mirrorlist
# Mirror selected during installation
Server = [url]ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arc[/url]
## Arch Linux repository mirrorlist
## Generated on 2011-10-26
## Any
#Server = [url]ftp://mirrors.kernel.org/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.kernel.org/archlinux/$repo/os/$arch[/url]
## Australia
#Server = [url]ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.internode.on.net/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch[/url]
#Server = [url]ftp://mirror.optus.net/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirror.optus.net/archlinux/$repo/os/$arch[/url]
etc-- etc--- etc
## Uzbekistan
#Server = [url]ftp://mirrors.st.uz/archlinux/$repo/os/$arch[/url]
#Server = [url]http://mirrors.st.uz/archlinux/$repo/os/$arch[/url]
/etc/pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Moderator: Added code blocks. This is what had been requested, edit this post to see how it is done -- ewaller
Last edited by elzorro (2012-01-09 12:02:54)FYI karol
Voila!
Regardz
El Zorro
karol wrote:elzorro, please post the whole mirrorlist using [ code ] tags.
# Mirror selected during installation
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
## Arch Linux repository mirrorlist
## Generated on 2011-10-26
## Any
#Server = ftp://mirrors.kernel.org/archlinux/$repo/os/$arch
#Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
## Australia
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
Server = http://mirror.aarnet.edu.au/pub/archlinux/$repo/os/$arch
Server = ftp://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch
Server = http://ftp.iinet.net.au/pub/archlinux/$repo/os/$arch
Server = ftp://mirror.internode.on.net/pub/archlinux/$repo/os/$arch
Server = http://mirror.internode.on.net/pub/archlinux/$repo/os/$arch
Server = ftp://mirror.optus.net/archlinux/$repo/os/$arch
Server = http://mirror.optus.net/archlinux/$repo/os/$arch
## Belarus
#Server = ftp://ftp.byfly.by/pub/archlinux/$repo/os/$arch
#Server = http://ftp.byfly.by/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.datacenter.by/pub/archlinux/$repo/os/$arch
#Server = http://mirror.datacenter.by/pub/archlinux/$repo/os/$arch
## Belgium
#Server = ftp://archlinux.mirror.kangaroot.net/pub/archlinux/$repo/os/$arch
#Server = http://archlinux.mirror.kangaroot.net/$repo/os/$arch
## Brazil
#Server = ftp://ftp.bitwave.com.br/archlinux/$repo/os/$arch
#Server = http://www.bitwave.com.br/downloads/archlinux/$repo/os/$arch
#Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/$arch
#Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
#Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/$arch
#Server = http://www.las.ic.unicamp.br/pub/archlinux/$repo/os/$arch
#Server = ftp://www2.itti.ifce.edu.br/archlinux/$repo/os/$arch
#Server = http://www2.itti.ifce.edu.br/archlinux/$repo/os/$arch
## Canada
#Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch
#Server = http://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/$arch
#Server = ftp://mirror.its.dal.ca/archlinux/$repo/os/$arch
#Server = http://mirror.its.dal.ca/archlinux/$repo/os/$arch
#Server = ftp://less.cogeco.net/pub/archlinux/$repo/os/$arch
#Server = http://less.cogeco.net/pub/archlinux/$repo/os/$arch
## Chile
#Server = ftp://mirror.archlinux.cl/$repo/os/$arch
#Server = ftp://mirror.netglobalis.net/archlinux/$repo/os/$arch
#Server = http://mirror.netglobalis.net/archlinux/$repo/os/$arch
## China
#Server = http://mirrors.163.com/archlinux/$repo/os/$arch
#Server = http://mirror.bjtu.edu.cn/archlinux/$repo/os/$arch
#Server = http://mirror6.bjtu.edu.cn/archlinux/$repo/os/$arch
#Server = ftp://mirror.lzu.edu.cn/archlinux/$repo/os/$arch
#Server = http://mirror.lzu.edu.cn/archlinux/$repo/os/$arch
#Server = ftp://mirrors.stuhome.net/archlinux/$repo/os/$arch
#Server = http://mirrors.stuhome.net/archlinux/$repo/os/$arch
## Colombia
#Server = http://www.laqee.unal.edu.co/archlinux/$repo/os/$arch
## Czech Republic
#Server = ftp://archlinux.mirror.dkm.cz/pub/archlinux/$repo/os/$arch
#Server = http://archlinux.mirror.dkm.cz/pub/archlinux/$repo/os/$arch
#Server = http://mirror.vpsfree.cz/archlinux/$repo/os/$arch
## Denmark
#Server = ftp://mirrors.dotsrc.org/archlinux/$repo/os/$arch
#Server = http://mirrors.dotsrc.org/archlinux/$repo/os/$arch
#Server = ftp://ftp.klid.dk/archlinux/$repo/os/$arch
## Estonia
#Server = ftp://ftp.eenet.ee/pub/archlinux/$repo/os/$arch
#Server = http://ftp.eenet.ee/pub/archlinux/$repo/os/$arch
## Finland
#Server = ftp://mirror.academica.fi/archlinux/$repo/os/$arch
#Server = http://mirror.academica.fi/archlinux/$repo/os/$arch
#Server = ftp://mirror.archlinux.fi/archlinux/$repo/os/$arch
#Server = http://mirror.archlinux.fi/archlinux/$repo/os/$arch
## France
#Server = http://mir.archlinux.fr/$repo/os/$arch
#Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
#Server = http://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://mir1.archlinux.fr/archlinux/$repo/os/$arch
#Server = http://mir1.archlinux.fr/archlinux/$repo/os/$arch
#Server = http://miroir.ezvan.fr/archlinux/$repo/os/$arch
#Server = ftp://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
#Server = http://archlinux.mirrors.ovh.net/archlinux/$repo/os/$arch
#Server = http://archlinux.polymorf.fr/$repo/os/$arch
## Germany
#Server = http://archlinux.limun.org/$repo/os/$arch
#Server = ftp://artfiles.org/archlinux.org/$repo/os/$arch
#Server = http://artfiles.org/archlinux.org/$repo/os/$arch
#Server = http://mirror.devnu11.net/archlinux/$repo/os/$arch
#Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
#Server = http://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
#Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
#Server = http://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/$arch
#Server = ftp://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
#Server = http://ftp-stud.hs-esslingen.de/pub/Mirrors/archlinux/$repo/os/$arch
#Server = ftp://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.de.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://mirrors.n-ix.net/archlinux/$repo/os/$arch
#Server = http://mirrors.n-ix.net/archlinux/$repo/os/$arch
#Server = ftp://mirror.selfnet.de/archlinux/$repo/os/$arch
#Server = http://mirror.selfnet.de/archlinux/$repo/os/$arch
#Server = ftp://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
#Server = http://ftp.spline.inf.fu-berlin.de/mirrors/archlinux/$repo/os/$arch
#Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://arch.mirrors.tuxdroid.org/$repo/os/$arch
#Server = http://arch.mirrors.tuxdroid.org/$repo/os/$arch
#Server = ftp://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/$arch
## Great Britain
#Server = ftp://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch
#Server = http://mirror.lividpenguin.com/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.cinosure.com/archlinux/$repo/os/$arch
#Server = http://mirror.cinosure.com/archlinux/$repo/os/$arch
#Server = ftp://mirrors.uk2.net/pub/archlinux/$repo/os/$arch
#Server = http://archlinux.mirrors.uk2.net/$repo/os/$arch
## Greece
#Server = ftp://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch
#Server = http://ftp.cc.uoc.gr/mirrors/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.ntua.gr/pub/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.otenet.gr/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.otenet.gr/linux/archlinux/$repo/os/$arch
## Hungary
#Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
## India
#Server = ftp://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch
#Server = http://mirror.cse.iitk.ac.in/archlinux/$repo/os/$arch
## Ireland
#Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch
#Server = http://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/$arch
## Israel
#Server = ftp://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch
#Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/$arch
## Italy
#Server = http://mirrors.prometeus.net/archlinux/$repo/os/$arch
## Japan
#Server = ftp://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch
#Server = http://ftp.jaist.ac.jp/pub/Linux/ArchLinux/$repo/os/$arch
#Server = ftp://ftp.yz.yamagata-u.ac.jp/pub/linux/archlinux/$repo/os/$arch
#Server = http://ftp.yz.yamagata-u.ac.jp/pub/linux/archlinux/$repo/os/$arch
## Kazakhstan
#Server = ftp://archlinux.kz/$repo/os/$arch
#Server = http://archlinux.kz/$repo/os/$arch
## Korea
#Server = ftp://mirror.yongbok.net/archlinux/$repo/os/$arch
#Server = http://mirror.yongbok.net/archlinux/$repo/os/$arch
## Latvia
#Server = http://archlinux.goodsoft.lv/$repo/os/$arch
## Luxembourg
#Server = ftp://archlinux.mirror.root.lu/archlinux/$repo/os/$arch
#Server = http://archlinux.mirror.root.lu/$repo/os/$arch
## Macedonia
#Server = http://arch.linux.net.mk/archlinux/$repo/os/$arch
## Moldova
#Server = ftp://mirror.ihost.md/archlinux/$repo/os/$arch
#Server = http://mirror.ihost.md/archlinux/$repo/os/$arch
## Netherlands
#Server = ftp://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.nl.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch
#Server = http://ftp.nluug.nl/pub/os/Linux/distr/archlinux/$repo/os/$arch
## New Caledonia
#Server = ftp://archlinux.nautile.nc/archlinux/$repo/os/$arch
#Server = http://archlinux.nautile.nc/archlinux/$repo/os/$arch
## Norway
#Server = ftp://mirror.archlinux.no/$repo/os/$arch
#Server = http://mirror.archlinux.no/$repo/os/$arch
#Server = ftp://mirror.pvv.ntnu.no/pub/archlinux/$repo/os/$arch
## Poland
#Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
#Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/$arch
## Portugal
#Server = ftp://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch
#Server = http://ftp.rnl.ist.utl.pt/pub/archlinux/$repo/os/$arch
## Romania
#Server = ftp://mirrors.adnettelecom.ro/archlinux/$repo/os/$arch
#Server = http://mirrors.adnettelecom.ro/archlinux/$repo/os/$arch
#Server = ftp://mirror.archlinux.ro/archlinux/$repo/os/$arch
#Server = http://mirror.archlinux.ro/archlinux/$repo/os/$arch
#Server = ftp://ftp.roedu.net/mirrors/archlinux.org/$repo/os/$arch
#Server = http://ftp.roedu.net/mirrors/archlinux.org/$repo/os/$arch
## Russia
#Server = ftp://mirror.yandex.ru/archlinux/$repo/os/$arch
#Server = http://mirror.yandex.ru/archlinux/$repo/os/$arch
## Singapore
#Server = ftp://ftp.oss.eznetsols.org/linux/archlinux/$repo/os/$arch
## South Korea
#Server = ftp://ftp.kaist.ac.kr/ArchLinux/$repo/os/$arch
#Server = http://ftp.kaist.ac.kr/ArchLinux/$repo/os/$arch
## Spain
#Server = ftp://ftp.rediris.es/mirror/archlinux/$repo/os/$arch
#Server = http://sunsite.rediris.es/mirror/archlinux/$repo/os/$arch
## Sweden
#Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch
#Server = http://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/$arch
#Server = ftp://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch
#Server = http://ftp.lysator.liu.se/pub/archlinux/$repo/os/$arch
#Server = ftp://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch
#Server = http://ftp.portlane.com/pub/os/linux/archlinux/$repo/os/$arch
## Switzerland
#Server = ftp://archlinux.puzzle.ch/$repo/os/$arch
#Server = http://archlinux.puzzle.ch/$repo/os/$arch
## Taiwan
#Server = ftp://linux.cs.nctu.edu.tw/archlinux/$repo/os/$arch
#Server = http://linux.cs.nctu.edu.tw/archlinux/$repo/os/$arch
#Server = ftp://shadow.ind.ntou.edu.tw/archlinux/$repo/os/$arch
#Server = http://shadow.ind.ntou.edu.tw/archlinux/$repo/os/$arch
#Server = ftp://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
#Server = http://ftp.tku.edu.tw/Linux/ArchLinux/$repo/os/$arch
## Turkey
#Server = ftp://ftp.linux.org.tr/archlinux/$repo/os/$arch
#Server = http://ftp.linux.org.tr/archlinux/$repo/os/$arch
## Ukraine
#Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch
#Server = http://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/$arch
#Server = ftp://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch
#Server = http://mirrors.mithril.org.ua/linux/archlinux/$repo/os/$arch
## United States
#Server = ftp://archlinux.supsec.org/pub/linux/arch/$repo/os/$arch
#Server = http://archlinux.supsec.org/$repo/os/$arch
#Server = ftp://cake.lib.fit.edu/archlinux/$repo/os/$arch
#Server = http://cake.lib.fit.edu/archlinux/$repo/os/$arch
#Server = http://mirrors.cat.pdx.edu/archlinux/$repo/os/$arch
#Server = ftp://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch
#Server = http://cosmos.cites.illinois.edu/pub/archlinux/$repo/os/$arch
#Server = http://mirror.ece.vt.edu/archlinux/$repo/os/$arch
#Server = ftp://ftp.archlinux.org/$repo/os/$arch
#Server = ftp://ftp.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
#Server = http://www.gtlib.gatech.edu/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch
#Server = http://mirror.ancl.hawaii.edu/linux/archlinux/$repo/os/$arch
#Server = http://mirrors.us.kernel.org/archlinux/$repo/os/$arch
#Server = ftp://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
#Server = http://mirror.us.leaseweb.net/archlinux/$repo/os/$arch
#Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/$arch
#Server = http://mirrors.gigenet.com/archlinux/$repo/os/$arch
#Server = http://mirror.mocker.org/archlinux/$repo/os/$arch
#Server = ftp://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
#Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
#Server = ftp://mirror.rit.edu/archlinux/$repo/os/$arch
#Server = http://mirror.rit.edu/archlinux/$repo/os/$arch
#Server = http://mirrors.rutgers.edu/archlinux/$repo/os/$arch
#Server = http://schlunix.org/archlinux/$repo/os/$arch
#Server = http://mirrors.lax1.thegcloud.com/arch//$repo/os/$arch
#Server = http://mirror.yellowfiber.net/archlinux/$repo/os/$arch
Last edited by elzorro (2012-01-09 12:35:18) -
Pacman fails to install git ?[FIXED]
I'm trying to install git on my system but it just fails every time with this message :
resolving dependencies...
looking for inter-conflicts...
Targets (2): perl-error-0.17011-1 git-1.6.1-1
Total Download Size: 6.61 MB
Total Installed Size: 14.29 MB
Proceed with installation? [Y/n] Y
:: Retrieving packages from extra...
error: failed retrieving file 'git-1.6.1-1-x86_64.pkg.tar.gz' from ftp.belnet.be : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'git-1.6.1-1-x86_64.pkg.tar.gz' from ftp.nluug.nl : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'git-1.6.1-1-x86_64.pkg.tar.gz' from ftp.belnet.be : File unavailable (e.g., file not found, no access)
warning: failed to retrieve some files from extra
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.
I've tried different mirrors and such but still the same error ?
Last edited by sylvarant (2009-02-02 14:03:30)belnet.be seems to be out of sync for almost a week. Pick another mirror and copy it to the top of /etc/pacman.d/mirrorlist.
-
Failed to fetch data provider data. (LO 26306)
Hi,
We have created a webi report, which is having a date prompts.
The same webi report, we have used in xelsius using a live office connection.
In Xelsius, We have checked the box 'refresh on load', under usage tab.
When we run the xelsius dashboard, we are getting an "Failed to fetch data provider data. (LO 26306)".
Can anyone please help. why this error is getting. Is it because of prompts which are there in webi report.
Basically, our requirement is when the user runs the dashboard, prompts should be displayed. User will enter the prompts and based on that, dash board should get display.
Regards
Ramesh GanjiSee SAP Note 1440129.
Symptom
Change the Live Office documentation to clearly state that before importing a Live Office document within Xcelsius the Live Office document has to be opened in Excel and the 'Refresh All objects' triggered. If this step is not done and the Excel file is saved without prior refresh the error 'Failed to fetch data provider data (LO 26306) in Xcelsius is raised (when previewing the model)
Environment
Live Office 3.1
Xcelsius 2008
Cause
The information is not stated in the official documentation.
Resolution
The issue has been identified and logged under Problem Report ID ADAPT01374107
Keywords
01374107, ADAPT, ADAPT01374107, LO, 26306, LO 26306, LiveOffice -
Hi, twice now when upgrading the kernel I have seen
"error: command failed to execute correctly"
in pacmans output, any ideas as to what it might be?
Bit of pacman output:
( 4/11) upgrading fontconfig [###################] 100%
updating font cache... done.
( 5/11) upgrading gpm [###################] 100%
( 6/11) upgrading linux [###################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> ERROR: file not found: `fsck.btrfs'
==> WARNING: No fsck helpers found. fsck will not be run on boot.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: bfa
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
error: command failed to execute correctly
( 7/11) upgrading man-db [###################] 100%
( 8/11) upgrading mdadm
jason@jason-laptop ~ % sudo mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> ERROR: file not found: `fsck.btrfs'
==> WARNING: No fsck helpers found. fsck will not be run on boot.
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.3-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: bfa
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successfulFirst search result: https://bbs.archlinux.org/viewtopic.php?id=139370
Please make some effort yourself... -
Policy web agent configuration failed: NSPR error Configuration Failed!!!!
I am having troubles to install agent Apache 2.2!!!!!
The libamapc22.so uses libstdc++.so.5....
so i have this error:
root@ped-02 bin# service httpd start
Starting httpd: httpd: Syntax error on line 995 of /etc/httpd/conf/httpd.conf: Syntax error on line 1 of /opt/web_agents/apache22_agent/Agent_006/config/dsame.conf: Cannot load n/opt/web_agents/apache22_agent/lib/libamapc22.so into server: libstdc++.so.5: cannot open shared object file: No such file or directory
In my OS is Installed the libstdc++.so.6
if I Install the libstdc++.so.5
I have this error:
[Wed Aug 20 15:50:35 2008] [notice] Digest: generating secret for digest authentication ...
[Wed Aug 20 15:50:35 2008] [notice] Digest: done
[Wed Aug 20 15:50:35 2008] [alert] Policy web agent configuration failed: NSPR error Configuration Failed
So I have installed NSPR and NSS but this error persists.
In log /opt/web_agents/apache22_agent/Agent_006/logs/debug/amAgent
===========
2008-08-20 16:16:36.152 Error 18271:b949c3d0 all: Connection::initialize() unable to initialize SSL libraries: NSS_Initialize returned -8128
2008-08-20 16:16:36.156 Error 18271:b949c3d0 all: initialization error: am_properties_load(com.sun.am.policy.agents.config.stopInInit) failed, error = NSPR error (12): exiting...
2008-08-20 16:16:36.156 Error 18271:b949c3d0 all: Process initialization failure:NSPR error
My configuration: ---- AMAgent.properties
com.sun.am.cookie.name = iPlanetDirectoryPro
com.sun.am.cookie.secure = false
com.sun.am.naming.url = http://accessmanager.coreo.network.ctbc:8080/opensso/namingservice
com.sun.am.policy.am.login.url = http://accessmanager.coreo.network.ctbc:8080/opensso/UI/Login
com.sun.am.policy.agents.config.local.log.file =/opt/web_agents/apache22_agent/Agent_006/logs/debug/amAgent
com.sun.am.policy.agents.config.local.log.rotate = false
com.sun.am.policy.agents.config.remote.log = amAuthLog.accessmanager.coreo.network.ctbc.80
com.sun.am.log.level =
com.sun.am.policy.am.username = amadmin
com.sun.am.policy.am.password = fhfeUCQselvAndSuo17Pww==
com.sun.am.sslcert.dir =
com.sun.am.certdb.prefix =
com.sun.am.trust_server_certs = true
com.sun.am.notification.enable = false
com.sun.am.notification.url=http://accessmaager.coreo.network.ctbc:80/UpdateAgentCacheServlet?shortcircuit=false
com.sun.am.policy.am.url_comparison.case_ignore = true
com.sun.am.policy.am.polling.interval=3
com.sun.am.sso.polling.period=3
com.sun.am.policy.am.userid.param=UserToken
com.sun.am.policy.agents.config.profile.attribute.fetch.mode=NONE
com.sun.am.policy.agents.config.profile.attribute.map=cn|common-name,ou|organizational-unit,o|organization,mail|email,employeenumber|employee-number,c|country
com.sun.am.policy.agents.config.session.attribute.fetch.mode=NONE
com.sun.am.policy.agents.config.session.attribute.map=
com.sun.am.policy.agents.config.response.attribute.fetch.mode=NONE
com.sun.am.policy.agents.config.response.attribute.map=
com.sun.am.load_balancer.enable = false
com.sun.am.policy.agents.config.version=2.2
com.sun.am.policy.agents.config.audit.accesstype = LOG_DENY
com.sun.am.policy.agents.config.agenturi.prefix = http://accessmanager.coreo.network.ctbc:80/amagent
com.sun.am.policy.agents.config.locale = en_US
com.sun.am.policy.agents.config.instance.name = unused
com.sun.am.policy.agents.config.do_sso_only = false
com.sun.am.policy.agents.config.accessdenied.url =
com.sun.am.policy.agents.config.fqdn.check.enable = true
com.sun.am.policy.agents.config.fqdn.default = accessmanager.coreo.network.ctbc
com.sun.am.policy.agents.config.fqdn.map =
com.sun.am.policy.agents.config.cookie.reset.enable=false
com.sun.am.policy.agents.config.cookie.reset.list=
com.sun.am.policy.agents.config.cookie.domain.list=
com.sun.am.policy.agents.config.anonymous_user=anonymous
com.sun.am.policy.agents.config.anonymous_user.enable=false
com.sun.am.policy.agents.config.notenforced_list = SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/UI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTCONSOLE_DEPLOY_URI/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/login_images/* SERVER_PROTO://SERVER_HOST:SERVER_PORT/docs* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/namingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/sessionservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/loggingservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/profileservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/policyservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/config* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/js/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/css/* SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/authservice SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLAwareServlet SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLSOAPReceiver SERVER_PROTO://SERVER_HOST:SERVER_PORTSERVER_DEPLOY_URI/SAMLPOSTProfileServlet
com.sun.am.policy.agents.config.notenforced_list.invert = false
com.sun.am.policy.agents.config.notenforced_client_ip_list =
com.sun.am.policy.agents.config.postdata.preserve.enable = false
com.sun.am.policy.agents.config.postcache.entry.lifetime = 10
com.sun.am.policy.agents.config.client_ip_validation.enable = false
com.sun.am.policy.agents.config.profile.attribute.cookie.prefix = HTTP_
com.sun.am.policy.agents.config.profile.attribute.cookie.maxage = 300
com.sun.am.policy.agents.config.logout.url=
com.sun.am.policy.agents.config.logout.cookie.reset.list =
com.sun.am.policy.am.fetch_from_root_resource = true
com.sun.am.policy.agents.config.get_client_host_name = true
com.sun.am.policy.agents.config.convert_mbyte.enable = false
com.sun.am.policy.agents.config.ignore_path_info = false
com.sun.am.policy.agents.config.override_protocol =
com.sun.am.policy.agents.config.override_host =
com.sun.am.policy.agents.config.override_port =
com.sun.am.policy.agents.config.override_notification.url =
com.sun.am.policy.agents.config.connection_timeout =
com.sun.am.receive_timeout = 0
com.sun.am.connect_timeout = 0
com.sun.am.poll_primary_server = 5
com.sun.am.tcp_nodelay.enable = false
com.sun.am.policy.agents.config.encode_url_special_chars.enable = false
com.sun.am.policy.agents.config.iis.filter_priority = HIGH
com.sun.am.policy.agents.config.cdsso.enable=false
com.sun.am.policy.agents.config.cdcservlet.url = http://accessmanager.coreo.network.ctbc:8080/opensso/cdcservlet
Jonathan Costa Muniz.Hi joncmuniz,
Are you managed to resolve this problem? I have the same.
In logs i have such information:
2008-10-08 16:48:02.471 Debug 23153:84d5368 all: Connection::initialize() calling NSS_Initialize() with directory = "" and prefix = ""
2008-10-08 16:48:02.471 Debug 23153:84d5368 all: Connection::initialize() Connection timeout wen receiving data = 0 milliseconds
2008-10-08 16:48:02.472 Error 23153:84d5368 all: Connection::initialize() unable to initialize SSL libraries: NSS_Initialize returned -8128
2008-10-08 16:48:02.475 Error 23153:84d5368 all: initialization error: am_properties_load(com.sun.am.policy.agents.config.stopInInit) failed, error = NSPRerror (12): exiting...
2008-10-08 16:48:02.475 Error 23153:84d5368 all: Process initialization failure:NSPR errorI think the problem is with certificates, but i can't point where.
Can you help? -
[SOLVED]Building in a Clean Chroot error: Build failed, check ~/build
Hello everyone
I am trying to build qt4 and qtwebkit in clean chroot but when I run makechrootpkg (according to DeveloperWiki:Building in a Clean Chroot) I get an error message:
$ sudo makechrootpkg -c -r /home/zuargo/chroot/
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
As you see chroot directory is contained in my home folder.
I have checked /home/zuargo/chroot/zuargo/build and I see just the PKGBUILD and another random file (it depends on the package to build). No useful information.
I have made twice the chroot directory and in both times I get the same error.
Does somebody have any idea on how to solve this trouble or how to get information related to the error?
Thanks in advance
Last edited by zuargo (2013-04-19 14:12:53)Thank you
I have new information.
Searching for information on the forum (this one) I have found this thread: https://bbs.archlinux.org/viewtopic.php?pid=1260353
The user that started the topic, had (or have) a very similar issue. At the first post, he says has fixed the problem by downgrading the package devtools to the version 20120720. So then, I did the same thing.
I had installed devtools 20130408 and in the cache of Pacman, I have the version 20130127, 20130122, 20121115, 20121027, 20121013, 20120720 of this package. I have downgraded to all these versions of devtools, one by one. In some cases, after downgrading and by creating the chroot directory I got errors, either with the package systemd or with the package filesystem. In the first case, the error did not affect the creation fo the chroot directory. In the second case (with filesystem), creating the directory was not successful, getting an error message (see below).
I proceed to list each devtool package (its version) and the error I have got, when I tried to create the chroot directory:
> devtools-20120720-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Also an error with lacale-gen:
chroot: failed to run command '/usr/sbin/locale-gen': No such file or directory
Creating chroot directory successful
No error by building packages with makechrootpkg into the chroot directory.
> devtools-20121013-1-any.pkg.tar.xz
filesystem's error:
( 4/130) installing filesystem [##########################################] 100%
error: could not rename /home/zuargo/chroot/root/etc/resolv.conf to /home/zuargo/chroot/root/etc/resolv.conf.pacorig (Device or resource busy)
error: problem occurred while installing filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
Creating chroot directory was not successful
> devtools-20121027-1-any.pkg.tar.xz
filesystem's error:
( 4/130) installing filesystem [##########################################] 100%
error: could not rename /home/zuargo/chroot/root/etc/resolv.conf to /home/zuargo/chroot/root/etc/resolv.conf.pacorig (Device or resource busy)
error: problem occurred while installing filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
Creating chroot directory was not successful
> devtools-20121115-1-any.pkg.tar.xz
filesystem's error:
( 4/130) installing filesystem [##########################################] 100%
error: could not rename /home/zuargo/chroot/root/etc/resolv.conf to /home/zuargo/chroot/root/etc/resolv.conf.pacorig (Device or resource busy)
error: problem occurred while installing filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
Creating chroot directory was not successful
> devtools-20130122-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Error by building packages with makechrootpkg into the chroot directory:
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
> devtools-20130127-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Error by building packages with makechrootpkg into the chroot directory:
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
> devtools-20130408-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Error by building packages with makechrootpkg into the chroot directory:
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
As see, the only one package that allows me to build into chroot directory with no errors is devtools-20120720.
Now I can build packages into a clean chroot directory. But I can't update devtools. -
Hello Experts,
I am trying to create a model for the below web service.
http://<server>:<port>/irj/servlet/prt/soap/com.sap.portal.prt.soap.ActivityReportWS?style=doc_lit and I have done the service invocation thru the Visual Admin and I have given the user credentials (Administrator's).
Now, when I drag the method and try to drop it on the storyboard I'm the below error:
Failed to fetch metada(popup name):
Portal requesst failed due to: Operation not found.
Can you please let me knoow where it's going wrong?
BR<
RNHi Raghava,
You may find this thread to be useful
Failed to fetch metadata
Hope it helps.
Regards,
Dao
Maybe you are looking for
-
CS3 - What Are the Best Export Settings for Animation?
I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can. What are the best possible settings that I can use to export the video to a .MOV file? A little background info, in
-
RFC Receiver adapter issue. Pls advice
Hi All, When XI is sending data back to R/3 system though RFC Receiver Adapter I am getting the below error. Any suggestions Error Category XI_J2EE_ADAPTER_RFC Error Code RECEIVER_GENERAL_ERROR Pls advice.
-
When I send a message to a friend in Texas, it says message failure but when I called him he said that he had a stable wifi and the same thing happened to him. How do I get messages to him?
-
Hi, If i have created an exchange rate for the combination of USD and GBP and GBP and USD (inverse) which combination will be given the first preference in determining the valid exchange rate. Example :- USD : GBP = 0.63910 GBP : USD = 5.00 In this e
-
Had hotmail working fine for months, had to change password, could not connect and get verified. Tried deleting and restarting, not working, need help.