Mirror iPad Screen at full-resolution on HDTV?

Best I can tell from what I've read, there's no accessory I can use to hook my iPad to an HDTV via HDMI, DVI, or RGB analog, and still mirror the iPad's screen at full iPad resolution.
Is that true?

Thanks for confirming the impression I got from reading this forum, and various other sources.
What I'm mostly looking for some sort of way to have my iBooks (or Kindle books) show up on my big-screen HDTV. That, so that I can read while I exercise on my elliptical machine. I created a ... book rack ... for my iPad and attached it to the exercise machine, but, not surprisingly, it ends up jostling around to the point of being unreadable.
Probably the best bet would be to find some what to attach it to the wall instead of the exercise machine.
I read ... somewhere ... about a rumor that Apple might add iBooks, and possibly Apps capability in general, to AppleTV. As best I understand it, that plan apparently has either been scuttled, or it was just an unfounded rumor in the first place.

Similar Messages

My ipad screen is full of horizontal lines

My ipad screen is full of horizontal lines & it wont switch off. Even after force close, when i restart, the lines are still there ?
What do I do ?
Regards
Sumit

First try a simple reset if you already havent. Hold down the home and power buttons for 15 to 30 seconds until you see the silver apple then let you device start normally. If the lines are still there the next step would to be backup your device and restore from iTunes as a new device. If the lines are still there after you restore your device would need service or replacement.

How do I save pictures from iPhoto iPad app in full resolution?

When I import a large 6-9MB picture into the iPhoto app on iPad for editing, and then save it to my camera roll, the resulting picture is 150-200KB. How can I save it in full resolution after it's been edited?

When i import a large file 6mb to iphoto using itunes it become 1,2mb, maybe its the same to you and after edit it become 150-200kb
It seem that iphoto auto resize the picture, dont know why iphoto didn't give us freedom to choose the resolution when exporting

Force ipad to show full resolution photos ?

I am surprised and annoyed to find that all my photos on my IPad have been reduced in size to a preset maximum (2048x1024 or something close to that, I think) during the import process, I have many very large photos (autostitched landscapes etc), and I would very much like to be able to view them on the Ipad in their full detail - ie I would like to be able to pinch and zoom in to 1:1 resolution. Is there any way to make the IPad2 do this ?

Hmm. I tried the Simple Transfer app (thanks for the info) and it did indeed preserve the resolution of the files copied across - but not the size of the file itself. One photo (16394 x 2069 pixels) was 21MB on my computer and became 7.1MB on the IPad. However, when I looked at both photos on my PC (copied the IPad photo back across to PC by connecting IPad as a camera) they were identical, even though one was 3 times the file size of the other ?
It would be great if the IPad would simply zoom in to full magnification......as I expected it would. At least now I know I can take it on holiday and it's not going to ''optimise'' (ie reduce the detail and sharpness) all my photos.

How to mirror ipad screen on desktop?

Hello,
I often do web meeting from my desktop and want to get my ipad screen on my desktop. Is there any app that will display my ipad screen to desktop. My both the device are on diffrent network. Ipad is using 3g datacard and laptop is using office LAN.
I have tried teamviewer, gotomeeting, cisco webex, skype but not able to share ipad screen for all activities.
Note: using IBM Cognos Mobile App and want to share this to show mobile BI reports to my meeting users.
Thanks,
Ashish Sharma

This will not work for my requirement. My both the device are not on same network.
"To enable AirPlay Mirroring on your iOS 7 device:
Connect your iOS device and your Apple TV to the same Wi-Fi network."

Mirror iPad screen on it Host PC.

I have a business presentation to make to several remote audience members and will be hosting that meeting from an iMac desktop computer. I will be sharing my host iMac's screen and hope to simultaneously show a connected iPad's screen as a window on the host computer screen. My intention is to show an iPad application's behavior to the audience along with a slide presentation from the iMac.
I've seen examples of 'terminal service'-like applications where I can display a PC's screen on the iPad. This is not what I'm looking for. I don't need to control the PC/iMac from the iPad. I've also seen examples of other tools that require jailbreaking. No, thanks. I simply want to present the iPad's screen image to the remote audience - regardless of the app running on the iPad.
No, I don't want to host the meeting from the iPad, as this won't give the breadth of control I need. And, no, I don't want to 'take a video' of the iPad from the iMac's camera, as this will grossly diminish the granularity of the image. And finally, no, I don't want to capture a canned video of the iPad application's behavior for playback. The presentation must be a flexible, real-time review of the application's interactivity.
I believe what I'm looking for is nothing more than the same technique used during Apple's keynote introduction of the iPad.
Any solid suggestions from this august group is greatly appreciated. Thanks. Me.

The only product that I know of where you can remotely view an iPad is LogMeIn Rescue. It is designed for a customer support rep to remotely control an iPad, and so can also view the iPad's screen. This is more than what you want, since the audience would be able to control your iPad. And it is an "enterprise solution" so is priced accordingly. (Almost $2000/year.)
I suggest you think "outside the box". Perhaps use the HDMI adapter to mirror your iPad's display (assuming you have an iPad2) and use a video capture device to display the HDMI input in a window on the Mac. The HDMI capture device is not going to be cheap either but off the top of my head, that's all I can think of at the moment.
...I believe what I'm looking for is nothing more than the same technique used during Apple's keynote introduction of the iPad....
BTW, what was shown in the keynote was not as complex as what you're trying to do. The iPad's screen was mirrored to a projector (or whatever was onscreen behind Steve,) NOT displaying the iPad onto a Mac's desktop. What we all watched was some guy with a video camera showing Steve and the screen behind him, and a producer/director person switching signal inputs between the cameraman and the iPad screen video feed. (e.g.: the HDMI output of the iPad.) IOW, what was on the projection screen was the iPad's screen by itself, or the slideshow slides, or the cameraman's shots.
So while you say you do not want to use a camera to capture the iPad's display, at times that is more or less what was happening in the keynote.

Monitor no longer mirrors at full resolution

I have a 1080p monitor. The mac is not able to output to this at full resolution when the displays are set up to 'mirror' (connected to 2011 macbook pro via DVI- thunderbolt adaptor used).
Previously in Snow Leopard I was able to attach the monitor (via DVI with a thunderbolt / mini display port adaptor), close the lid of my macbook, then insert a USB device, to wake the computer from sleep mode. Upon waking from sleep, the computer would detect the external monitor and display at full 1080p resoltion. The lid of the computer could then be opened to use the laptop keyboard and trackpad.
In Lion, the above process works, however when the lid of the laptop is opened, the detect display process seems to run again and the laptop screen turns back on and the external display will no longer mirror at full resolution.
I already have an apple wireless keyboard and mouse, but am using these with another computer- so cannot use these with the laptop (this configuration would allow me to work with the laptop lid closed, and hence keep full resoltion on the external monitor). It isn't practical to get 2 wireless keyboards and mice, so I'm looking if Apple will support mirroring the display at full resolution (or indeed just the ability to turn the laptop monitor off, to allow the 2nd display to run at full resolution...)
(Works fine on the same macbook pro when running Windows 7 in Bootcamp, so must be technically feasible).

I have a 1080p monitor. The mac is not able to output to this at full resolution when the displays are set up to 'mirror' (connected to 2011 macbook pro via DVI- thunderbolt adaptor used).
Previously in Snow Leopard I was able to attach the monitor (via DVI with a thunderbolt / mini display port adaptor), close the lid of my macbook, then insert a USB device, to wake the computer from sleep mode. Upon waking from sleep, the computer would detect the external monitor and display at full 1080p resoltion. The lid of the computer could then be opened to use the laptop keyboard and trackpad.
In Lion, the above process works, however when the lid of the laptop is opened, the detect display process seems to run again and the laptop screen turns back on and the external display will no longer mirror at full resolution.
I already have an apple wireless keyboard and mouse, but am using these with another computer- so cannot use these with the laptop (this configuration would allow me to work with the laptop lid closed, and hence keep full resoltion on the external monitor). It isn't practical to get 2 wireless keyboards and mice, so I'm looking if Apple will support mirroring the display at full resolution (or indeed just the ability to turn the laptop monitor off, to allow the 2nd display to run at full resolution...)
(Works fine on the same macbook pro when running Windows 7 in Bootcamp, so must be technically feasible).

Is there a way to copy full resolution pictures to ipad from my mac via usb or sd connection kit?

I would like to copy my pictures to my ipad 2 at full resolution, partily for editing, partily for backup. I have used some of the wifi ipad apps out there and they all seem to be problematic and load up the camer roll. I have the sd and usb camera connection kit put out by apple and this works great as long as the pics are in their original file name (for some reason).
I would love to be able to just use the usb camera connection kit plug and copy all of these over in their folders ect. But I realize that may not be possible at this time.
Is their another easier way?

Syncing them via iTunes (and via Photo Stream in the Cloud) will 'optimise' them, so you will either need to use one of the wifi-transfer apps (in which case they will go into the Camera Roll) or the camera connection kit (when they will go into an 'imported' album). For the CCK and you need to create a DCIM directory off the root of the card, with the photos underneath it, and the photo filenames need to be exactly 8 characters long (no spaces) plus the file extension i.e. in a similar format as if a camera had created/written them.
I haven't tried any, but there may be third-party apps that you could use to store and keep the same file organisation of your photos.

HT204291 Apple TV iPad screen ratio

The Apple TV advertising clearly shows the mirrored iPad screen filling the screen of an HD aspect ratio TV. When I view my iPad 3 on my TV there are black boarders either side of the screen. Is there a solution to this problem.

It's possible they're displaying iPhone 5 mirroring (the iPhone 5 has a different ration)
Also, If the original content on the iPad is widescreen And your TV is widescreen this might be possible. (by playing with your TVs controls)
See discussion from earlier today.:
Ipad3 apple tv synchronisation/mirroring how can i create a full screen view on my tv ?:
https://discussions.apple.com/message/21600099#21600099

How to get full resolution screenshots from iPad with Retina display?

A coworker in another state has an iPad 3 with Retina display. I need him to email me some screenshots from his iPad. The native resolution is 2048x1536 yet every screenshot he sends me is only 1280x960 when opened in Photoshop. We've tried copying and pasting an individual photo in the mail message, as well as going to the camera roll, selecting 1 or multiple images and then sharing to a mail message, but all I ever get is 1280x960. This happens regardless of what the screenshot is of (either a specific app or just the iPad home screen).
Why aren't I getting full 2048x1536 screenshots? What do we need to do to get them? Thanks.
Mark

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in settings > AirPlay > Adjust for Overscan for the best setting that suits you.

HT204570 I have a ~22k pic iCloud photo library. I want to have a folder of ~1.2k pics available on my iPad in full resolution while offline, all the time. Can this be done?

Hi - I have had iCloud photos turned on for about 2 weeks. My old iPhoto library of around 22k pics uploaded no problem. My issues are with now viewing them on my iPhone and iPad, which are set to optimise storage.
On the iPad I used to have a folder of about 1200 pics which I'd use as a photo frame by chucking on as a slideshow on my desk at work. I don't connect to the wifi there. Since iCloud photo I can't do this, as the pics are mostly low res, if there at all (two weeks after upload the vast majority of my library appears as just a sea of grey squares on both i-devices - thumbnails have not appeared for huge swathes of the library at all. Is this going to right itself?). I read about using Favourites to ensure local full res copies are kept, so I've gone through and favourited each pic (no option to do this in bulk on the iPad?) and this has ensured at least that each pic of those selected have thumbnails now, but no guarantee that the full image will display. Even when I run the slideshow connected to wifi the low-res pixelated placeholder is what's displayed for most of the time the image is on the screen. And if Favourites is the way to force local hi-res copies I still have no need for these to be also stored in full resolution on my iPhone.
Basically, I want a way to force folders to be available in full, offline, and specific to the device. Is this possible? Big step back for what I use this thing for if not.

Is there anything ornate in the frame images. Or are they more or less just made with strips of standard framing molding. If nothing fancy just molding then an action that uses patterns and a little bit of scripting can frame your images orientation does not matter a little scripting handles that. To scale you images to the proper size will take some scripting and the spread sheet exported to a CSV file containing filename width and height.
My crafting action package contains 12 scripts to be used in actions. Two of which would be very useful for your project. If you create you script to size the images so they have the correct print size. The framing of these would be easy. The action would first run two of my run twice scripts for action. The first scripts saves the documents current resolution so the action can change it to what it need the document to have for its framing patterns. The second script will rotate portrait images to landscape orientation. The action can the add the 1" frame. once the frame is in place the action the runs the two scripts again. The second time these action run they will restore thing. One will rotate the documents it rotated to landscape back to portraits and the other will restore the documents resolution. My image visualization package has framing actions and a script to make a 1" mitered selection to be filled with the framing pattern.
Image Visualization Package Example
Crafting Actions Package
Contains
Action Actions Palette Tips.txt
Action Creation Guidelines.txt
Action Dealing with Image Size.txt
Action Enhanced via Scripted Photoshop Functions.txt
CraftedActions.atn Sample Action set includes an example Watermarking action
Sample Actions.txt Photoshop CraftedActions set saved as a text file.
12 Scripts for actions
Download

Duplicate iPad screen on HDTV through air play

How do I duplicate iPad screen on HDTV through air play?

You need an iPad 2 or 3 (new iPad).
The iPad 1 only allows basic Airplay.
The iPad needs to be on the same network as the AppleTV.
Airplay needs to be enabled (or not disabled) in AppleTV settings.
On iPad, press the Home button twice, swipe to the leftmost screen where if AppleTv is detected you should have an Airplay option and a slider to turn on mirroring. If you have a compatible ipad and don't see this try rebooting all devices and your router.
AC

How can I view movies in iPad with the full screen?

Ok, I bought two movies from iTunes on my iMac and synced them with my iPad. It went well.
But when I play them back on the iPad, I can only view them in letterbox/portrait mode which uses only one third of the iPad screen!!! Why is this? Is there anyway I can actually utilise the other two thirds of the iPad screen to view the movie? Otherwise it kind of defeats the object of having an iPad surely?
FevLad

Hi,
I think we are going to experience some format problems on our mobile devices, unfortunate as that may be.
This is caused, I think, by the video and cable providers preparing to roll out live programming through LTE
broadband from the cell towers to multiple mobile devices and home television. We should expect some
bumbs along the road.
This may be an unrelated problem:
On my Ipad, before OS 5 upgrade, I was was able to view Xfinity, HBO Live, ABC Live and CNN Live in full
screen using the popup full screen icon on the top right of the screen.
After OS 5, HBO,ABC,CNN LIVE - all could be viewed full screen using the popup icon.
The popup Icon is not available with Xfinity. Xfinity is now letterbox. Very, very annoying!!!
The Comcast New Products department said that engineering would fix this problem. I sure hope they do.
Howie

How can I control an iPad from a touch screen which is mirroring the iPad screen

How can I control an iPad from a touch screen which is mirroring the iPad screen.
This is a very important application for disability students who wish to use iPad apps but do not have sufficient fine motor skills to use the small screen of an iPad but could use a large format display touch screen.
There must be a way.?????????? Help!!
Peter Niass
[email protected]

Have a look here
http://www.macstories.net/iphone/the-external-touchscreen-that-can-control-an-ip hone/

How can a cable tv provider recognize the presence of the AV adapter and hence blockning the mirroring of the IPad screen?

I am using the Xfinity Play app to acces Comcast/xfinity material.
IPad refuse to mirror its screen picture but let the sound through.
Instead the TV display the text 'you are not permitted to use this material on a non mobile unit.'
If I use a non-Apple AV adapter the problem is gone.
How come that Xfinity recognize the presence of a non mobile unit in one case but not in another?
Does Apple deliberately provide the source. with this information?

That is what the content providers want and hit has nothing to do with Apple.
The ATV certainly is not about cutting the cord, it is not a replacement for cable/satellite or OTA TV.

Mirror iPad Screen at full-resolution on HDTV?

Similar Messages

Maybe you are looking for