Mirroring image is small with HDMI projector

When I connect my Apple TV to my 47" Vizio TV and start up mirroring on my ipad 2, the image is full size and beautiful. When I take the ATV to the school where I want to use it for iPad instruction, I connect it to an Epson Powerlite 93 via HDMI.  The image is tiny. Is there any trick to get it full screen, or do I need an actual HD projector?

There are some suggestions for changing image size in the manual.  If you do not have one, here is the link
http://files.support.epson.com/pdf/pl92__/pl92__ug.pdf

Similar Messages

  • I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    I have a mac mini and just purchased a moshi hdmi connector for my LED TV. The problem is, I wanted to be able to take my mouse from one screen to another, not just as a mirror image! Is it possible to do this some how?

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    If you have two displays attached, then the function to change from mirrored to extended Desktop will appear in System Prefs/Displays.

  • I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

    I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

    For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer.  Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top. 

  • I have the officejet 7500 A and there is no mirror image option...how do I print with mirror image

    Officejet7500A how do I print mirror image?

    Yes using paint works, however it resizes once printed. I have been trying to reverse image print and i think its absolutley insane HP took away this option. Why have the image print for tshirt and not keep reverse. If i open my word banner project in paint, when i print it doesnt stay true to its size, then i have to photocopy and photocopy until i get the right size. Pain in the a@# if you ask me...lol. PLease bring back the option with a driver update! PLease! For pete's sake a ricoh printer at work has it, why not HP home where it will actually be used.. 

  • Need help with a mirror image effect

    For most of our product photos, I create a copy of the image, flip it vertically, fade it out, and then move it down to create a mirror image effect. Simple enough. But this one I'm having a problem. The product has 4 legs, and from this view, the back 2 legs are shorter. When I do my normal steps that I listed, I get similar to what you see below. I know all about drawing a marquee around part of the reflection, hitting Ctrl+T and then holding down Ctrl+Shift to skew just what's in the marquee. I've done this technique a lot, but it does not work for this particular image. What do I have to do to get the reflection of the back legs to line up with the actual back legs in the image? Thanks.

    Well, Photoshop is not a 3D rendering program and you can only fake it by painting or assembling the reflection using your artistic skills and knowledge of perspective and reflections. From certain angles and with certain objects this could be quite easily done by just mirroring the 2D image but in other cases like  this it wont' work. I made a quick scene in a 3D program to show you how the refection will actually be in real life - you will see the bottom of the table in the reflection and this is missing from the 2D image. You can assemble and position separately parts of the reflection from the 2D image by using the front sides of the table and and legs but the rest (bottom) of table has to be created from scratch.

  • External Monitor (HDMI Projector) not recognized in AE CC or AE CS6 with New Macbook Pro

    Got a really tough problem that maybe someone can help me find a solution for.  I had an old Macbook Pro (2009-ish) that I was using in conjunction with AE and my HDMI Projector to do projection mapping work.  The laptop motherboard wore out recently (not related, I don't think) but now I've bought a new Macbook Pro and am trying to use the HDMI out to the projector as my external monitor in After Effects (I've tried both CC and CS5.5 and CS6). Under Video Preview it's not showing up as an option to send to (the choices are Computer Monitor Only or Firewire). 
    I am in a real mess as I am supposed to do a show this evening with a setup I've done lots of times with my old Macbook and AE, and now can't do it at all. I have to be able to have the projector receive the AE feed - and nothing I've done so far has helped. The system sees the projector, so why doesn't AE??  I can't just slide the program window into the projector's window space and enlarge - it has to be exactly 1920x1080 in order for me to align correctly.
    If there are any Adobe folks lurking this morning I would CERTAINLY appreciate your input, as well as anyone else who might have had similar issues. This should work, it should be a no-brainer. Right now I'm running a new OOTB Apple Macbook Pro with HDMI out, and the latest version of AE CC with all updates performed. Please, please help!!!
    Thanks in advance,
    Bill

    After Effects does not come with components for HDMI output.
    Your other computer must have had additional components installed that added this functionality.
    See this thread for more information:
    http://forums.adobe.com/thread/1006705

  • How to connect S5000 tablet to projector with HDMI input?

    Is S5000 tablet possible to connect to projector with HDMI input. I tried the adapter micro USB to HDMI but the projector can't detect the tablet. Is there a settings in the tablet?

    Well not had time to really play about, but I thought that miracast was based on widi and I was wondering if the software update would upgrade the widi version number.
    Funny thing is that they can see each other and I'm allowed to input the auth code but it seems as if it tmes out on trying to establish a connection.
    Could my router be preventing the connection? There doesn't seem to be many config on the TV or tablet on set up.

  • Connecting Macbook Pro osx10.6.8 to flatscreen vis HDMI.  Only suggestions I have seen is to use Mirror Image in sysPref displays.  I don't see any mention of mirror image in displays.  Won't connect

    Connecting Macbook Pro osx10.6.8 to flatscreen vis HDMI.  Only suggestions I have seen is to use Mirror Image in sysPref>displays.  I don't see any mention of mirror image in displays.  Won't connect

    I am asking the Moderator to move your post  to the MacBook Pro forum, this is an iMac forum.
    Good luck.

  • HT6114 Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?

    Hi Mac,
    Does the 10.9.2 update fix the issue on 2011 macs where projectors with HDMI are not recognized via thunderbolt adapter?
    Thanks in advance,
    Ricardo Arguelles

    Sordidloam wrote:
    So to be clear, this issue occurs on any input with the Denon Receiver.  Occurs from both HDMI out and MiniDisplay Port out.  Goes away when we reinstall the OS and update it to 10.9.2.  Comes back as soon as we update to 10.9.3.
    Cheers
    MLE
    Have you been able to use the Mac Mini directly attached to the plasma/LCD/projector with out going through the Denon AVR? Even with 10.9.3 installed?
    I have a Pioneer AVR and I have the Mac attached via a HDMI to HDMI and all is working for me. Can your Denon do some upscaling? Some AVR, like my VSX-53 can change the scaling of the input video. Meaning if I still had my Apple TV 2 which outputs 720P only, can be upscaled in my AVR to 1080i or 1080P or even 24fps. Heck, I could even plug in an old style Red, White, Yellow cable and upscale it to 1080P and output it HDMI.
    I am wondering if your Denon is able to do that and it might be set wrong. Check the owners manual for such settings. Even the plasma/LCD/project could be doing the upscaling too. So check that too.
    KOT

  • Apple Watch does it make provisions for left-handers? either a mirror image version, or the ability to rotate the display 180º allowing it to be worn on the right wrist and controlled with the left hand?

    Does the apple Watch accommodate left-handed people? is there a mirror image option, or can the display be rotated 180º, allowing the watch to be worn on the right wrist, and manipulated with the left hand? Just wondering if you have thought about that?
    Thanks,
    Rick
    PS: none of the "communities " accessible to me seemed appropriate for this question, so I am posting here, hoping someone will forward it on to the proper place in Apple.

    Does the apple Watch accommodate left-handed people? is there a mirror image option, or can the display be rotated 180º, allowing the watch to be worn on the right wrist, and manipulated with the left hand? Just wondering if you have thought about that?
    There's a option when setting up the watch to set it up for left handed users. That and the easily user revisable straps will accommodate lefties.

  • Multi monitor with splitter only gives mirror image

    i have a mac intel based 10.5.6 (i know i need an update) i ordered a minidvi to vga adapter but i thought that i could use a splitter to move my mouse to the two other monitors but it only gives me a mirror image and i dont know if i could change that. Any ideas?

    The adapter worked but the refresh rate is very fragmented and i cant get a clear movement of pictures and it is also slowing my other monitors down. my guess is that it requires additional software and a load of adapters which i think is messed up. I have 10.5.8 now and do not see much a difference. the first monitor that attached was throught the mini dvi on that back with a vga adapter and it works like a charm on 1920x1080. is there any kinf of mini dvi "hub" or expander to give me one extra port?

  • Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    Since upgrading the IOS 8 on my IPad 2 I can longer get a full screen on my TV when connected with an HDMI cable. anything I should change in my settings? Right now my iPad is mirrored on the TV with a black box all around the edge

    I have reached the same conclusion in the mean time. I have done a bit of investgation in to other grahics cards and am seeing some that show SPDIF connections from the card to the mother board. I was not familar with SPDIF but it did a little bit of sluething. It is of course a digitally enconded voice. I am guessing that in that case the mother board ( assuming it supports this hardware option) would use this output and be able to translate that digital audio to its other audio outputs. That is a lot of guessing of course. I think my "solution" might  be a whole new desktop - a rather drastic course of action! I was in the proceess of getting ready to upgrade this machine anyway with a new graphics card (which I will now return), go to Win 7, and maybe even a new digital TV reciever,  and I don't want to throw good money after bad anyway.
    Thanks for your comments

  • Freezing projector image while working with the computer behind the freeze

    Hi!
    I want to write a program that can freeze the image (screen) sent to the projector so that I can change things in the application behind the freeze before sending the new image instead. Where do I begin? Is there a way to control projectors?
    / D

    Unless you are talking about some sort of special device (although I don't know of any) most projectors simply display whatever is on the screen. So if you try to bring up another window to work with, for example, it will also appear on the projector's output.
    You may be able to do something using a split screen-type setup where one screen displays the intended projector output and the other is for your control. I have never tried this but am pretty sure it can be done in Java because I have seen references to it before. The trick would be getting the projector to display the appropriate screen, I suppose.

  • With the latest iPhoto software is it possible to 'flip' an image or as some say do a 'mirror image' of the photo?

    With the latest iPhoto software is it possible to 'flip' an image or as some say 'mirror image' a photo, meaning to change it from left to right to right to left, or vice-versa.
    thanks

    No - but with preview (included on your Mac) you can and you can set Preview as the external editor for iPhoto - so I guess you can with the latest or any version of iPhoto
    LN

  • Will an Apple TV (Current Model 2012) Mirror an iPad? HDMI projector?

    I am a wanting to be able to project my iPad 2.
    Can the iPad do this on a TV?
    Should I just buy an HDMI projector instead?
    Anybody have any info on this?
    Thanks!
    Julian

    Assuming you already own an Apple TV that is connected to the same network as the iPad then all you need to do is double click the home key, slide the menu bar at the bottom to the right, then there is an icon next to the volume for AirPlay. Tap this and select your Apple TV. You can then enable mirroring from that menu. Some apps provide AirPlay functionality built in that functions even better tha mirroring.

Maybe you are looking for

  • How to stop Syncing

    I just got my 3Gs. I also bought a USB desktop cradle which charges my iphone and connects it to my pc. My problem is that every time I finish a call and put the iphone back in it's cradle, it launches iTunes and the resyncs. I don't want this. My co

  • ITunes won't let me move files to new hard drive

    Hey, all...I'm having a really major problem with my computer. I'm trying to move my iTunes library to a new hard drive. Currently, it's in a 1-terabyte Western Digital USB drive powered through the USB, and I'm trying to move it to a Seagate 1-terab

  • Exporting a PDF file

    How do I make a PDF folder of multiple PDF documents in order to export it to an internet site with the goal of creating a printed booklet? I have new MacG5 desktop using Yosemite OS 10.10.1.

  • How do i fix the "web form must capture customer name and email address" error?

    Hi all, I have a webform that is submitting securely to the bc servers. I get the response: {"SystemMessage": { "success": False, "message": "ERROR: An error occurred. Your web form must capture customer name and email address. Please fix this issue

  • Converting wma  for use in itunes

    How can I convert wma file so that I can use them in Itunes. Thanks