Mirroring the image of a shot from left to right.

I bet this is the silliest question ever!
I can't figure out how to make my image switch from right to left. I can figure out how to put a mirror effect half way through my shot, and I can rotate it, but not flip the sides.
Can anyone help?
Cheers, Jon.

You welcome.
Rules wouldn't allow me to say this but it is for a good cause:
Jerry deserves a star too!
Good luck with your work,
Gogi

Similar Messages

HT1430 Having reset my iPad via the settings route, the apple logo appeared on screen and the bar below it filled from left to right, then stopped. I can do nothing more: it will switch off, but when switched on again only the apple logo and filled line a

Having resent my iPad using the Settings route, the Apple logo appeared onscreen and a line below it filled from left to right. When full, the device did nothing. I was able to switch it off and back on, only to see the same Apple logo and filled line. Even pressing the ON botton for a few seconds did nothing. The device is now inert, and I cannot access it. Please help!!!

Reset iPad and continue with Restore.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Is it possible to flip the multiple choice quiz "radio" button from left to right of the answers?

Hello forum,
I am using Captivate version 6.1.0.319 on a Windows 7 desktop PC and would like to know if it is possible to flip the multiple choice quiz "radio" button from left to right of the answers. I am working on a project that uses the "Require Right to Left composer" within the Global Preferences: General settings. The captions has been switched from left to right but the quiz answer radio buttons did not. Any help would be appreciated.
Thanks, in advance.

Hello and welcome to the forum,
I'm not aware of such a possibility. A workaround could be to create your own MCQ slides, using standard objects and widgets like the radiobuttons widget (there is an enhanced version created by Jim Leichliter) and advanced actions. These articles were written for previous versions, but can give you an idea about the work involved:
http://blog.lilybiri.com/widgets-and-custom-questions-part-1
http://blog.lilybiri.com/extended-widgets-for-custom-mcq-and-tf-questi
Lilybiri

How to make a clip play backwards in timeline and how to reverse a clip from left to right?

I would love to know if it is possible to:
1. make a clip play backwards in the timeline
2. reverse the orientation of a clip from left to right
Thanks in advance.

Yes to both. The specific method may vary from one version to another.
1. make a clip play backwards in the timeline
Right click > Speed/ Duration > Reverse Speed
2. reverse the orientation of a clip from left to right
Apply the Basic 3D video effect. Adjust the Swivel to 180 degrees.
What version are you using?

Converting 11 digit value into 18 digit value by filling from left to right

Hello Experts,
I'm a newbie in ABAP-coding. I didn't found anything in the forum, so I'm sure somebody could give a little help. I would like to concatenate value into field name "mat". The input length is 11 the output length should be 18. Could you please look at the code belove:
data: c1(7) value '10000002',
      c2(3) value '001',
      c3(1) value '0',
      mat type /BI0/OIMATERIAL.
CONCATENATE c1 c2 c3 into mat.
write mat.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    INPUT     = mat
IMPORTING
   OUTPUT     = mat.
But is not giving me the correct result. I've defined a field "mat" which has the same proerty as 0MATERIAL and length = 18.
After concatenating values into mat, the result should be 10000002001 (length = 11).
But I would like the result to be showing from left to right in this way: 000000010000002001 (length = 18)
Could somebody tell where the problem could be?
Many Thanks
Mamadou

The probelm appears to be with
mat type /BI0/OIMATERIAL.
I changed it to
MAT(18)
and got
000000010000000010
Rob

Camera Raw crops my image from left and right

As you can see in the screen cap, camera raw inside AE opens my timelapse images cropped from left and right. I had this problem before in photoshop too, but never tried to fix it. I'm now in serious trouble and need to find a solution ASAP.

I'm guessing that you cropped in camera and when you shoot RAW the crop is honored but can be removed. I would use Lightroom. Set up a preset that resets the crop and process all of the frames and then export a png or if you want to do some advanced color correcting in AE, select any of the 32 bit image formats and render your resized images to a specific folder. Then import the images as an image sequence in Premiere Pro or AE and do the rest of the work. Importing an image at a time into AE and sequencing the layers in nuts...IMHO
One other thing, before you shoot any more images with this camera go through the menu and reset it to not crop your images.

I need to know how to delete downloaded videos and movies from iTunes when the instructions on the support page does not work. I have swiped the selections from left to right on the phone and nothing happens.

Hello.
I need help deleting videos, tv shows, and movies downloaded from itunes. I have followed the instructions to delete from the macbook, I selected the videos I wanted to delete and right clicked to delete. Nothing happens. When I double click on the video it still starts playing. I also followed the instructions to delete the videos from the iphone by swiping from left to right with nothing happening. I opened the videos on the ipad and there is no edit selection like in the instructions on the support page. Can you please tell me how to permanently remove this content so it doesn't try to copy from each device when I want to back up the Iphone and Ipad to my macbook. Thank you.

Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy

How to change the direction of movement in atable from left to right?

As the title says i want to change the movement direction in the cells of a table in pages when i click tab key from "left to right" to "right to left", is that possible?

It seams that we aren't using the same application.
In mine, if the cell C3 is selected, pressing shift + tab select the cell B3 which is what you wanted in your original post (or I understood it wrongly).
If what you want is the ability to insert a new row above the current one or at top of a table, you can't do that this way.
Same response if you want to insert a new column to the left of the table.
To do that, the soluce is to select the top row or the leftmost column.
There is a funny bug in the menu items.
If your table has a header row, entering the menu Format > Table, we get four items:
Insert new header above
Insert new header below
if we are in the header row
or
Insert new row above
Insert new row below
Insert a column before
Insert a column after
These four menus items have shortcuts :
option up arrow
option down arrow
option left arrow
option right arrow
If the table has no header, the menu items are :
Insert new row above
Insert new row below
Insert a column before
Insert a column after
None of them display a shortcut *_but the shortcuts are active_*
Yvan KOENIG (VALLAURIS, France) samedi 11 septembre 2010 23:52:27

My screen displays a shadow from left to right, being darker on the left and brighter on the right. Any advice about how to change this would be appreciated.

My screen from the moment it starts any program appears to be shaded from left to right. The left hand side of the display appears to be darker than the right half of the screen. Can someone please advise what I can do to alter this. Have I pressed something I shouldn,t have? Or is there a problem with my display?
Any help would be appreciated.
Many thanks.

Does not sound too healthy! You should take it to the Genius bar in the Apple store. May need the hardware looked at...
It's most probably a backlight issue. Take some piccys of it while it isnt working now!!

In transferring a video file from iPhone 4s to a flash drive then to a Axer FHD-45 pocket projector the image turns upside down. It is right side up in the computor and the flash drive. Any help?

In transferring a video from iPhone 4s to a flash drive then to a Axer FHD-45 pocket projector the image is upside down. It is right side up in the computor and the flash drive. Any help?

Have you tried transferringing the videos via usb (sinc you're having trouble transferring them with PhotoSync) as described here: http://support.apple.com/kb/HT4083 and just transferring the photos with PhotoSync?

HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
I am able to get the 'Home sharing' 'user and password on my Mac.
Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
When I give the same password, it is rejected.
Help!!!!
Jaxxdiggs

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

HT201335 Hi. I have an apple tv and am able to mirror the image on my ipad to my tv, however it doesn't fill the full screen. Is there a way to get a full image on my 32" Tv. Thanks a lot for your help

HI.I have an apple TV and am able to mirror the image on my ipad onto the screen. However, it doesn't fill the full 32" screen. Is there some way to project a bigger image onto the Tv. Thanks for your help

Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you.

Adobe Reader move the vertical scroll bar from left to right

Hi,
is it possible to move the vertical scroll bar from left to right in Adobe Reader 9?
If not, are you planning to implement this functionality?

I meant from right to left, sorry
You see, I'm left handed and when I use the scroll bar that is on the right side with the left hand I don't actually see the content of the page, because my left hand is covering the screen (I'm browsing the internet in tablet mode and I use the pen to navigate between pages).
My system is a Tablet PC with Windows XP Tablet Edition 2005 and Adobe Reader 9.3.2.
P.S. can you edit my post so the google indexes it right? (
from right to left
instead of "from left to right")

Hi i am working with indesign on a book in hebrew. and the page numbering that i apply. showing from left to right insted of right to left. can you please help? thank you. iris

hi
i am working with indesign on a book in hebrew. and the page numbering that i apply. showing from left to right insted of right to left.
can you please help?
thank you. iris

Hi Shawninglewood,
Welcome to the Support Communities!
The article below may be able to help you with this.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Cheers,
- Judy

When printing to the dye sublimation epson stylus pro 7700 using adobe illustrator it is required that I mirror the image. When mirroring the image the print colors are muted. Not mirrored and the print colors are perfect. Any suggestions?

When printing to the dye sublimation epson stylus pro 7700 using adobe illustrator it is required that I mirror the image. When mirroring the image the print colors are muted. Not mirrored and the print colors are perfect. Any suggestions?

CS5
On Tue, Oct 7, 2014 at 9:49 AM, ADBEDesigner <[email protected]>

Mirroring the image of a shot from left to right.

Similar Messages

Maybe you are looking for