Mirroring

What exactly is the procedure for 'mirroring ' my computers (iMac, Mavericks, and MacBook Pro, also Mavericks) to Apple TV?
I'd like to be able to see iPhoto albums and hear iTunes through the HDTV.
Thanks in advance.

AirPlay Mirroring on OS X is only available on these models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013 or newer)
It also requires an Apple tV 2nd generation or later
OS X Mavericks: Wirelessly mirror your Mac screen to your HDTV
About AirPlay Mirroring in OS X

Similar Messages

Encore WT8 - screen Mirroring on TV does not work

Hello,
I have a KDL42-W653A television which supports screen mirroring over WiFi.
However, I cannot get it to work with the Toshiba Encore W8 tablet.
The tablet detects the television, I enter the number, but the television never shows the tablet's screen.
Both the television and the tablet are on the latest firmware.
Another thread indicates there is an update for HDMI in January. I hope that covers this too.
Anwar

Hi
> I have a KDL42-W653A television which supports screen mirroring over WiFi.
By mirroring over WiFi what technology you mean exactly?
Miracast, Intel WiDi, DisplayLink?
Toshiba Encore supports *Miracast*
To use Miracase both devices needs to support this technology.
Then you can connect to external display very easy:
Tab Settings -> Change PC settings -> PC and devices -> Devices
Here you have to Add a device and you tablet will start searching for a Miracast devices
After the connection has been established, the name of the Miracast device will appear under Projectors
Did you test the video output connecting the table to the TV with an micro-HDMI cable?
Does it work?
Here is also an nice youtube video about the Toshiba Encore WT8 screen output options
http://www.youtube.com/watch?v=kBmInOnrS2U

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

TV Apple TV MacBook Air:How to connect my computer's monitor and TV as multiple monitors (NOT mirroring)

I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable.
when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
thank you!
Lydia

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

HT4437 how can i mirror my mac desktop onto my apple tv, and i dont mean itunes content only.

i want to know how to mirror my mac desktop screen onto my apple tv not limited to just itunes contents.

You need a recent Mac (2011 or later) running mountaion lion. The alternative for older hardware is airparrot

How can i mirror my mac book pro with apple tv

I need to know how to mirror my macbook pro with my apple tv so I can watch youtube and use my browser on my tv. So what I can see on my computer I want to see on tv. Is there a program I need or should it do it by it's self?

If you have Mountain Lion (OS X 10.8.*), then just select AirPlay from the menu along the top of your desktop, and your computer screen should appear on a tv attached to your Apple TV.

How to use iPad with apple tv (1st gen) mirroring

Can appletv 1st generation be configured with ipad2 to do mirroring??
I can't seem to figure out where to set that up..
Any help would be appreciated.

Disregard...just realized I need to buy an appletv 2 in order to do mirroring.....that really *****!
I like the 1st gen and really didn't need to upgrade to a new one.
If there is some other way to do mirroring from my ipad2, please let me know before I drop more $$ on Apple product.
Thanks

How to use mirroring with Apple TV

I want to use mirroring from my macbook pro onto my apple TV but I cannot find the airplay icon/app on either my macbook or my iphone 4S, what do I need to do to get started with mirroring. I cannot figure this out from the online user guides and discussions that I have read. Any suggestions?

Disregard...just realized I need to buy an appletv 2 in order to do mirroring.....that really *****!
I like the 1st gen and really didn't need to upgrade to a new one.
If there is some other way to do mirroring from my ipad2, please let me know before I drop more $$ on Apple product.
Thanks

How do I print a mirror image? Where did the old functionality go?

Within the last several months I was able to print a mirror image of my document to my HP DeskJet F4180 in high resolution. I don't know if it is the new HP drivers, or my new Snow Leopard OS but now I can' figure out how to do it again. I can grab a screen shot in and flip it in Preview but it ends up printing in low resolution.
I have printed mirror images in the past from my PDF applciations and I think from Office 2008 (PowerPoint). I find no documents saved on my hard drive that come up saved as a reverse image so I suspect that I was using a printer feature not an application feature to print mirror images.
Where did this functionality go?

Found it!
Use the check box marked Flip Image. Didn't is say mirror before?

How to mirror file server?

I run a small office network with Mac OS X Server 10.4.x doing various services including AFP. My wife and I also work from home and we would like to be able to access remotely various files which are held on the server.
We can do this over the internet, but the connections are not too quick. Ideally I would like to be able to run a mirrored copy of the file server on a little server at home, so that we can access the files locally and then have the servers keep each other up to date across the internet.
Is this possible?
TIA
James

Can anybody help me with this?
TIA

Windows 8.1 Disk Mirroring

Hello,
I am running a Windows 8.1, 32 bit. My C: drive contains Windows and I have 2 additional 3TB hard drives which are mirrored using Windows 8.1 storage spaces tools. I do not boot off of these disks and only use them for media and storage. I have a few questions:
1. As I am only using these disks for storage of files and not booting, if one fails, will the second one be recognized and useable with no data loss? I have seen many people warn against using Storage Spaces but it seems they are all talking about issues
on a mirrored boot drive - that is not my case.
2. I would like to upgrade to 64 bi as I want to add more than 4GB of RAM to my PC. I have media and a valid key, however, will I have to re-mirror the drives using storage spaces and will I lose the date on either 1 or both of them? Does Storage Spaces
do some compare to see that the disks are identical?
3. As the drives I want to mirror are both 3TB, will this cause an issue due to the size? I converted them to GPT when I initially installed 8.1 32 Bit. Will I have to do the same when I reinstall 64 bit or will they already be recognized?
Any help would be much appreciated.

Hi，
First,we need to understand mirror storage layout.
Mirror. Data is duplicated on two or three physical disks, increasing reliability, but reducing capacity. This storage layout requires at least two disks to protect you from a single disk failure, or at least five disks to protect you from two simultaneous
disk failures.
Storage Spaces can automatically rebuild mirror and parity spaces in which a disk fails by using dedicated disks that are reserved for replacing failed disks (hot spares).
So,the data isn't lost.
Regarding your second and third issues, Storage Spaces records information about pools and storage spaces on the physical disks that compose the storage pool.
Therefore, your pool and storage spaces are preserved when you move an entire storage pool and its physical disks from one computer to another.
Note: for parity spaces you must backup your data and delete the parity spaces. At this point, you may upgrade or perform a clean install of Windows 8. After the upgrade or clean installation is complete, you may recreate parity spaces and restore your data.
You can refer to the following article:
https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx
Hope this helps.
Regards,
Kelvin Xu
TechNet Community Support

HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

Airplay mirroring.
Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
Firewall set correctly (allow incoming...)
When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
Any help appreciated.

Hi!
I figured it out! It was a firewall issue.
I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
I hope that I can help some people with this info to fix the problem.

What is the difference between Video-out and mirroring?

What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
So far not doing very well.

Now found these but have had to give up on this adapter!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
http://support.apple.com/kb/HT4108

How to Mirror a user in CUP - Compliant User Provisioning

Hello
We are setting up CUP GRC 5.3 SP12
I currently do not see any way in the application for the requestor to just request that they want a new hire set up like (mirror) user x. Does this functionality exist? It appears the manager of the request would have to look up employee x (the mirror) and select all of the roles that user currently has in the system, and select them while in CUP. it seems like there should be a way to mirror or pull up someones current access in SAP and select those roles with just one click. Please let me know if this is possible and how your company deals with this issue if you are currently using CUP.
Thanks in advance

Hi Vitale,
You can do so with CUP 5.3. There is one option in CUP which helps you u select the role in that request like some user already had. When creating request, click on select role button. On next screen select type of access Model My access by option. Now you can search a user and select it. After that CUP will bring all role that this user had for the corresponding system. now u can select all, if you want to create a mirror image. Afterwards submit the request.
Kind Regards,
Srinivasan

How to recover data from failed drive that's part of mirrored raid

Hi Guys,
hope to get help from someone knowledgeable out there. I have a macpro and recently experienced a failed drive. I set up that failed drive as part of a mirrored raid, this set is not my primary drive and so my computer is stilling up and running but now am wondering how I access the data from the mirrored drive. Should the mirrored drive automatically mount on my desktop whereby I would be able to access the files? This is my first drive failure and I was under the impression having a mirror would duplicate my data and allow me to access it in situations like this. I'm a bit of novice in this area and not sure if the data is truly on the "mirror" or if there are things I need to do.
I launched disk utility and was able to see the mirrored drive and I selected "mount" drive but it would not mount; I then selected "verify" and got "unrecognizeable filesystem" Is this normal? Am I suppose do something to get access to the mirrored drive? Do I install a new drive in place of the failed drive and expect the raid to rebuild automatically whereby I then see the data?
Your help is much appreciated.

Even with a mirror, you still need a backup.
Along with Disk Utility, you still need 3rd party (TechTool Pro 5, Disk Warrior 4.1.1+).
And if you like to use RAID and esp mirror RAID, consider
http://www.softraid.com which is a step above (the pdf guide, manual you can download and they have a demo, so worth the read). SoftRAID can also import/convert an Apple RAID to its own format which has been known to recover drives and data.

How do I mirror my Macbook Air (Mid 2013) with my IMac (late 2006)?

How do I mirror my Macbook Air (Mid 2013) with my IMac (late 2006)?

Look at Target Display Mode:
http://support.apple.com/kb/ph4469
http://support.apple.com/kb/ht3924
Ciao.

Mirroring

Similar Messages

Maybe you are looking for