Mis-matched ram sizes (512mb and 1 gig) effect on performance...
Is my MacBook performance taking a hit because I have unequal values of RAM?
Any loss in performance is more than made up by increasing the amount of Ram anyway. You're not taking a hit right now, you're going a ton faster. Matched pairs may provide 5% performance increase, but if that holds anyone back from increasing their ram level with a mismatched set, then they need to rethink what ram does for a computer. I have 1.25 in my mini, because 512 wasn't enough and 2gb was too expensive right on the heels of the computer purchase itself. You will not miss the performance of a matched set.
Similar Messages
-
Mis-matched color in Before and After views
I recently purchased and installed LR 2.1 on a new HP 2.4 gb Vista 64 bit. 4 gb mem. Nvidia GeForce 9300GE card. Single LCD monitor. All updates installed.
While looking at an unedited Canon raw file in before and after I noticed that the gray was a little darker in the before view than in the after. I created a gray image in PS CS3 and took a look and it was the same.
This view can be very helpful but misleading if the colors will not match.
Any suggestions to a cure?
Thanks, RichardTry generating a Matrix profile instead of a LUT-based profile (a setting in the i1 software I believe). Somebody else reported a problem in shadow colors when using LUT-based profiles.
There can be a difference because the before view is based on the preview which is usually stored as a jpeg in adobeRGB space and the after view is rendered from the linear prophotoRGB space that Develop uses. It is possible that you're simply looking at artefacts because of that. -
IPhone 6 Plus 16GB blue screen crashes: Read, error type:Address map hole or size mis-match
Hi folks,
Some time ago I had a 16GB 6+ and it crashed with the blue screen, so I returned it. I now have a brand new one that I got from Tmobile ($75 return fee) and although it has mostly worked just fine, I have gotten 2 blue screen crashes. Below are the details from the phone's log.
What strikes me is the message "Read, error type:Address map hole or size mis-match".
Does anyone know if this could be caused by a hardware defect?
I've gotten one of these crashes running iOS 8.1.2 and another in 8.1.3.
Thanks.
Incident Identifier: 20304759-E90B-453F-BDC5-176AF4E30041
CrashReporter Key: fcf18d230005749957728546dea3221a0c588330
Hardware Model: iPhone7,1
Date/Time: 2015-01-25 19:43:44.913 -0800
OS Version: iOS 8.1.2 (12B440)
panic(cpu 0 caller 0xffffff8008cd45d0): L2C PIO error (src:core0-AF snoop, address:0x1202030208, access:Read, error type:Address map hole or size mis-match, L2C_ERR_STS:100003fc00000202, L2C_ERR_ADR:0x1108e1202030208, L2C_ERR_INF:0x2107)
Debugger message: panic
OS version: 12B440
Kernel version: Darwin Kernel Version 14.0.0: Mon Nov 3 22:27:30 PST 2014; root:xnu-2783.3.22~1/RELEASE_ARM64_T7000
iBoot version: iBoot-2261.3.33
secure boot?: YES
Paniclog version: 3
Kernel slide: 0x0000000006000000
Kernel text base: 0xffffff8008002000
Epoch Time: sec usec
Boot : 0x54bc22ef 0x00000000
Sleep : 0x54c58398 0x0002abb4
Wake : 0x54c583ae 0x000f08df
Calendar: 0x54c5b7e3 0x00025045same with my iPhone 4s 16gb
{"os_version":"iOS 8.1.3 (12B466)","bug_type":"110"}
Incident Identifier: 582496DB-6999-468C-9504-3D1C191B9F4B
CrashReporter Key: 623a577555e51ed110b937358adfa66fba3ea447
Hardware Model: iPhone4,1
Date/Time: 2015-02-20 04:17:50.830 +0300
OS Version: iOS 8.1.3 (12B466)
panic(cpu 0 caller 0x83dc8347): "i2c1::_checkBusStatus Bus is still in a bad state; last write status 00010110 xfer 00000000 fifo 00000000 for device als"
Debugger message: panic
OS version: 12B466
Kernel version: Darwin Kernel Version 14.0.0: Mon Jan 12 21:30:11 PST 2015; root:xnu-2783.3.26~3/RELEASE_ARM_S5L8940X
Kernel slide: 0x0000000003400000
Kernel text base: 0x83401000
Boot : 0x54e68884 0x00000000
Sleep : 0x54e68a7e 0x000dd6ac
Wake : 0x54e68b19 0x00035c02
Calendar: 0x54e68b1d 0x00040927
Panicked task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
panicked thread: 0xc5066e80, backtrace: 0x81a33ca0
0x834ad94d
0x834adcb1
0x8341d5bd
0x83dc8347
0x83dc8059
0x83dc7e35
0x8389c601
0x8389c513
0x836f6f65
0x8389cc6d
0x8389ccc5
0x83a9f18d
0x83a9c27f
0x83a9c73f
0x83a9c90d
0x836f6f65
0x83a9c8e5
0x836e91e7
0x8343ed9b
0x834ab59c
Task 0x84a87c60: 13773 pages, 122 threads: pid 0: kernel_task
Task 0x84a87948: 771 pages, 3 threads: pid 1: launchd
Task 0x84a87000: 2016 pages, 13 threads: pid 17: UserEventAgent
Task 0x84a87630: 481 pages, 4 threads: pid 18: misd
Task 0x84a87318: 4114 pages, 22 threads: pid 19: CommCenter
Task 0x87a62948: 349 pages, 2 threads: pid 21: keybagd
Task 0x87a62318: 574 pages, 4 threads: pid 23: iaptransportd
Task 0x87a62000: 868 pages, 9 threads: pid 24: configd
Task 0x87a7ac60: 793 pages, 4 threads: pid 25: lockdownd
Task 0x87a7a948: 1218 pages, 6 threads: pid 26: imagent
Task 0x87a7a630: 2771 pages, 4 threads: pid 27: atc
Task 0x87a7a318: 792 pages, 2 threads: pid 28: fairplayd.H1
Task 0x87a7a000: 1571 pages, 14 threads: pid 29: aggregated
Task 0x87c4ac60: 1069 pages, 4 threads: pid 30: routined
Task 0x87c4a318: 707 pages, 5 threads: pid 33: timed
Task 0x87d23c60: 646 pages, 2 threads: pid 35: installd
Task 0x87d23948: 2383 pages, 11 threads: pid 36: mediaserverd
Task 0x87d23318: 1279 pages, 11 threads: pid 38: ubd
Task 0x87d23000: 249 pages, 7 threads: pid 39: syslogd
Task 0x87d6ac60: 410 pages, 2 threads: pid 40: softwareupdated
Task 0x87d6a948: 851 pages, 5 threads: pid 41: mediaremoted
Task 0x87d6a630: 1877 pages, 7 threads: pid 42: identityservices
Task 0x87d6a318: 9938 pages, 16 threads: pid 43: SpringBoard
Task 0x87d6a000: 453 pages, 2 threads: pid 44: fileproviderd
Task 0x87e25c60: 609 pages, 4 threads: p -
Mis match in attributes of item category B and Blanket PO item details
Hi
I could not able to create a Blanket PO with document type FO and item category B (limit).
Normally for a blanket PO, GR is not allowed and IR is mandatory. So, I could able to see these checkboxes for GR (not set and grayed) and IR (set and grayed) in the item details of the PO in delivery and invoice tabs. But I end with an error message that 'GR is not set is used is not allowed' (exactly i don't remember but some thing like that)
Before creating a blanket PO, I found that in 'attributes of item categories', that for the item category B, GR is set and IR is not set (in customizing-OMH4). Of course, one cannot change the attributes of item categories.
I suppose due to this mis-match in the attributes of item categories and that in the PO, I'm getting an error message while creating a blanket PO and could not able to save.
Also I have checked all the system messages for the message displayed. No where(i.e. in any message class or category and for that message number) I found any such message defined with error in 'attributes of system messages' for purchasing, material master, inventory, invoice verification etc.
I suppose this error message is coming somewhere from the application program for the PO.
So, what can be the solution
waiting for your reply.
thank youThank you for your answer. I haven't mention this point in my thread but I have already tried this.
I have tried matching the GR and IR controls of account assignment category with PO GR, IR controls and also with item category B, GR, IR controls. Still i am getting the same error and could not able to save the PO
Also I have checked the field settings for PO for all categories like transaction relevant, item category relevant, etc in customizing.
Main problem is both GR and IR controls are being grayed in PO. Other wise I could able to change them as per my wish and could able to avoid the error even though the GR and IR controls in PO are correct as per the process requirement.
If possible, please check the GR and IR controls for item category B (in my system it showing that GR is set with binding and IR is not set with binding). But it should be reverse as per the process requirements and in limit PO it is showing correctly. i.e. with GR is not set with binding and IR is set with binding.
thank you -
Mis match in attributes of item category B-limit and PO item details
Hi
I could not able to create a Blanket PO with document type FO and item category B (limit).
Normally for a blanket PO, GR is not allowed and IR is mandatory. So, I could able to see these checkboxes for GR (not set and grayed) and IR (set and grayed) in the item details of the PO in delivery and invoice tabs. But I end with an error message that 'GR is not set is used is not allowed' (exactly i don't remember but some thing like that)
Before creating a blanket PO, I found that in 'attributes of item categories', that for the item category B, GR is set and IR is not set (in customizing-OMH4). Of course, one cannot change the attributes of item categories.
I suppose due to this mis-match in the attributes of item categories and that in the PO, I'm getting an error message while creating a blanket PO and could not able to save.
Also I have checked all the system messages for the message displayed. No where(i.e. in any message class or category and for that message number) I found any such message defined with error in 'attributes of system messages' for purchasing, material master, inventory, invoice verification etc.
I suppose this error message is coming somewhere from the application program for the PO.
So, what can be the solution
waiting for your reply.
thank you
Message was edited by:
srinivas vandanaThank you for your answer. I haven't mention this point in my thread but I have already tried this.
I have tried matching the GR and IR controls of account assignment category with PO GR, IR controls and also with item category B, GR, IR controls. Still i am getting the same error and could not able to save the PO
Also I have checked the field settings for PO for all categories like transaction relevant, item category relevant, etc in customizing.
Main problem is both GR and IR controls are being grayed in PO. Other wise I could able to change them as per my wish and could able to avoid the error even though the GR and IR controls in PO are correct as per the process requirement.
If possible, please check the GR and IR controls for item category B (in my system it showing that GR is set with binding and IR is not set with binding). But it should be reverse as per the process requirements and in limit PO it is showing correctly. i.e. with GR is not set with binding and IR is set with binding.
thank you -
How can we see what is the CPU and RAM size for the database?
<div class="jive-quote">select * from v$version</div>
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi
PL/SQL Release 10.2.0.5.0 - Production
CORE 10.2.0.5.0 Production
TNS for HPUX: Version 10.2.0.5.0 - Production
NLSRTL Version 10.2.0.5.0 - Productioncat /proc/meminfo
root: total: used: free: shared: buffers: cached:
Mem: 1055760384 1041887232 13873152 0 100417536 711233536
Swap: 1077501952 8540160 1068961792
MemTotal: 1031016 kB
MemFree: 13548 kB
MemShared: 0 kB
Buffers: 98064 kB
Cached: 692320 kB
SwapCached: 2244 kB
Active: 563112 kB
Inact_dirty: 309584 kB
Inact_clean: 79508 kB
Inact_target: 190440 kB
HighTotal: 130992 kB
HighFree: 1876 kB
LowTotal: 900024 kB
LowFree: 11672 kB
SwapTotal: 1052248 kB
SwapFree: 1043908 kB
Committed_AS: 332340 kB
cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 31
model name : AMD Athlon(tm) 64 Processor 3000+
stepping : 0
cpu MHz : 994.927
cache size : 512 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce (snipped)
bogomips : 1956.97
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp -
Getting CSS rollover background to match in size
Hi,
I'm on an intel Mac using DW CS4. I've created pretty straightforward CSS rollovers for my navigation but the background color area of the rollover isn't matching the original background area in size. Looking very carefully, there's an extra pixel in height on the size when you rollover. I've tried tweaking the 'height:4px" setting in the li a area but it just shifts the dynamic in size and the mis-match is still there.
Here's the link/site: Http://www.frankbright.com
I really appreciate any help. This is probably basic CSS but I'm still learning. Many Thanks,
Frank B.
Btw, I forgot to mention, this seems to vary depending upon the browser. Firefox seems to be the main one not matching up.Hi Frank
Closely looking i do get a 1px more at the extrem end of the navigation to get rid of 1px, i had refine the solution as below.
Step 1
.oneColElsCtrHdr #nav ul {
background-color: #000000;
color: #FFFFFF;
float: left;
font-family: arial,helvetica,sans-serif;
height: 23px; /************************remove height form it*******************************/
list-style: none outside none;
margin: 0 auto;
padding: 0;
text-align: center;
width: 710px;
Step 2
.oneColElsCtrHdr #nav {
background-color: #000000; color: #FFFFFF;
height: 23px; /************************remove height form it*******************************/
margin-top: 0;
padding: 0;
width: 745px;
flaot:left; /************************add float:left; *******************************/ -
ML Ram, VRAM paging and allocation questions.
Question 1: I have been dealing with ram issues since I got my 2012 13 MacBook air since I put mountain lion on it. I benched the machine for awhile because of it and used my 2011 MBP since it has 16gb of ram but it recently gave up the ghost so im back on the air. I did all the updates it needed since being benched and for my light duty work it’s always good but as soon as I have more then 2 or 3 apps open at the same time or 6 or 7 safari tab it really goes to crap. After a cold boot with nothing running the OS is using 1.4-1.6gb ram to idle the older MBP used 1gb or less after a cold boot. I have gone to the trouble of doing a complete reinstall and not using any extra apps other then iLife and iWork and that hasn’t helped. The wired ram sits right at a gig and the active ram right around 4-5 hundred mb. I have added up all the running processes and factored in a 10% increase over that number just in case and added in the video ram(which with 4gb of system ram I thought was supposed to be 384mb but its actually 512mb, which is another topics ill be asking about) at 512mb the totally ram usage is only 918mb. I asked this once before and didn’t get any help so ill ask again, is this ram usage normal for this kind of machine or is there something wrong? The apple store says there isn’t anything wrong but there has to either be something wrong or the OS has hidden processes that cant be seen in activity monitor?
Question 2: did one of the updates increase the video ram allocation and is the video ram automatically and always paged or does the OS and graphics processor (HD4k) page VRAM only as needed?
If the graphics processor doenst always page all the video ram and does it dynamically then I have an even bigger problem and more ram being used and not accounted for.Your issue almost certainly has nothing to do with RAM. Right now I am running Photoshop, FileMaker Pro, Word, iTunes, Mail, I have 8 tabs open in Safari, and about little utilities running. It is a 2011 MBA with 4GB of RAM and it feels no slower now than it did when I rebooted it yesterday after installing an update.
Obsessing over the Activity Monitor's report of RAM usage will get you nowhere - there's only one number in the entire dialog box that has any real importance to us: Page Outs - which indicate how much data has had to be swapped from RAM to hard drive, which, of course means you are trying to use more RAM than the computer actually has.
I suggest that you take a close look at what processes are running and the CPU usage of each. You may have a rogue process that is bogging the computer down. Another two prime suspects would be Internet plug-ins and Safari extensions.
One of my most important troubleshooting tools is a test account in which I've installed no software or performed any configurations. When my computer acts up I boot into that account to see if the problem follows me there. If it does not, I know the problem exists in my library. -
Mixing ram SIZES in Late 2013 i7 27" iMac
Just assume all ram sticks are the same specs.......
Can I mix ram SIZES in Late 2013 i7 27" iMac? I.E. : two - 4 GB and two - 8 GB?You should try to balance RAM out as equally as possible between available slots.
For example, 2 4 4 4, 2 2 4 4, 2 2 2 4, but not 2,4,8,0. And where you only have two slots, 2 2, 2 4, 4 4, and so on. -
I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status of
the drive in DU's status area. If it does not say "Verified" then the drive
is failing or has failed and will need replacing. Otherwise, click on the
Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
the drop down menu to one. Set the format type to Mac OS Extended
(Journaled.) Click on the Options button, set the partition scheme to
GUID then click on the OK button. Click on the Partition button and
wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
drive entry) from the left side list. Click on the Erase tab in the DU main
window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
Options button, check the button for Zero Data and click on OK to
return to the Erase window.
6. Click on the Erase button. The format process can take up to several
hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer. -
[SOLVED] xfce+slim, suspend to RAM causes black and white strips
I recently installed a fresh copy of Arch. When I click the "suspend to RAM" xfce button the screen turns off as it should, but when I try to resume I see 5 columns of black and white stripes (like a flattened checkerboard ). Alternatively when I click the "suspend to disk" (hibernate) button the screen turns black but the backlight is still on, the only way to get out of this state is to do a force shutdown with the button.
I don't know if this is just an xfce problem, or if slim is also part of the problem, but it doesn't hurt to let you guys know about that as well.
Reading about this problem somewhere else as a probably graphics driver issue, here's my graphics card:
NVIDIA Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
and I installed the Nvidia nouveau driver from here. I didn't see anything on that page about this kind of issue.
I also tried to add "ck-launch-session dbus-launch" to my .xinitrc file, I knew it probably wasn't the solution but I wanted to try anyways. didn't work.
I also have 2 gigs of RAM and 3 gigs in swap partition.
What do you guys think?
Last edited by Zonqt (2013-01-12 02:37:59)I have a slight newbie question that's related to my problem: after installing pm-utils am I supposed to have a file /etc/pm/config.d/modules? I reread the docs on suspend and standby here and the instructions are implying I should already have such a file, (since they say to modify it rather than create it), but I've installed and reinstalled the pm-utils and don't have any file there.
It's kind of important too, since i'm thinking I should put my graphics driver as one of those suspended modules...
Edit: one more interesting tid bit, when I use "pm-suspend" in the tty command line (by disabling the slim service and never going to xfce) I suspend fine. I need to have root privileges but I can just use sudo. (this is another reason why it could be a graphics card issue or I guess a privileges issue, hmm)
Edit2: I just tried to login as root from slim and hitting the suspend button, but got the same issue. So it's likely not a privileges issue. Strange.
Last edited by Zonqt (2013-01-11 17:10:49) -
I upgraged my macbook 2.4 GHz ram to 4g and now lower slot shows empty
I have recently upgraged my ram to 4g and now the lower memory slot always shows empty.
Any suggestions?I currently have 4gb in my core 2 duo (First Model) macbook. The last 700k is not recognized due to the internal design of the macbook, so the real "maximum" the computer sees is 3.3 gb. A web site published the speed gains with more memory, here is the web page for the results:
http://eshop.macsales.com/Reviews/MacBook/Testing/Memory_Benchmarks
4 Gigs of ram works great in my macbook, I noticed a huge speed increase even on boot, everything is much snappier than the original 1 gb. -
Paper detected does not match paper size or type selected
Says paper mismatch! Paper detected does not match paper size or type selected. I have a 6600. Can some help?
Hi,
Try updating the printer firmware, the latest version should improve its paper handling.
Follow these steps to get the latest update for the printer and then check for any differencex:
http://support.hp.com/us-en/product/HP-Officejet-6600-e-All-in-One-Printer---H711a/H711g/4322968/mod...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How do I manage Video Ram size
Hello,
I would like to ask how do I adjust the size of video ram in OSX and windowsXP. I have read someone's post saying that it is not user changeable in OSX. if it is not changeable, when will it changeable to a larger size? How about in windowsXP? Is it also unchangeable?
Thanks a lot,You are aware that video RAM is a physical factor while "OS X" or "Windows XP" are software operating systems. The system you use plays no role in how large your video RAM is. If you want to adjust your video RAM usage, go to the monitor control panel and change the resolution and color depht.
If, on the other hand, what you were trying to say was that some laptops that run on Windows allow you to upgrade them with physical video RAM, I guess it must be so. The Macbook doesn't allow this and uses shares video RAM which, to my understanding, means that it uses a part of the main RAM for video. -
Hi all,
i have increased RAM size to 32 GB in our production server. currently we have 40 GB of SWAP. now i want know how to distribute the RAM size to database , SAP and operating system. please let me know the parameters for increase.
Operating system : SuSE 10 SP2
Database : oracle 10.2.0.2
SAP : SAP ECC 6.0 SR2 (ABAP stack only)
ztta/roll_area 6500000
ztta/roll_first 1
ztta/short_area 4000000
rdisp/ROLL_SHM 32768
rdisp/PG_SHM 32768
rdisp/PG_LOCAL 150
em/initial_size_MB 5120
em/blocksize_KB 4096
em/address_space_MB 4096
ztta/roll_extension 2000000000
abap/heap_area_dia 2000000000
abap/heap_area_nondia 2000000000
abap/heap_area_total 2000000000
abap/heaplimit 40000000
abap/use_paging 0
please give you valuable suggestions and whether it is required to increase the swap size
regards
Ramesh
Edited by: Ramesh Sammiti on Oct 26, 2009 10:54 AMAs this is production system, you better go with SAP's recommendations.
You do Zero memory (Default memory parameters) open an OSS message and probably
you can do quick sizer modeling also.
service.sap.com/quicksizer
All the best,
Nagaraju
Maybe you are looking for
-
Email Account Push Notifications
I am a new iPhone user. I have setup three email accounts in my phone, two personal and one business. I am trying to find a way to disable the audible alert for my business account, but keep the notifications active for my personal accounts. (I get s
-
If I share an iPhoto library between multiple users, will the Faces, Events, and Places be automatically usable by all users, or will each user have to tag all the photos (e.g. if a user tags a face, will a different user have to do it in their own i
-
Problem w/ Dell webcam monitor
I bought a Dell SP2008 LCD ws monitor w/ webcam recently, but my Mac Mini (running Parallel 3.0 & XP Home) has problem using the webcam. I spent 4 hours w/ the tech. guy at Dell, & he concluded that the chipset & audio drivers of the Mac Mini need to
-
Problems with trial PS CS6 questions
In the trial version of PS CS6 I am getting errors when I select some tools or some effects. The program wants to shut down. What's happening and can it be fixed?
-
Bluetooth Not Avaiable on my Macbook Pro Mid 2010, Why?
Dear Forum, I've a Macbook Pro (i5 Model, Mid 2010, Out of guarantee....) since September I've this problem: "Bluetooth Not Available" I've tried a PRAM reset (Cmd-Alt-P-R and Power) but nothing changes I've tried a permission-repairing but nothing c