Misalign animated titles after exporting videos in PE7- help needed

Hello, I'm a new user in PE7, I'm facing this problem on the animated texts titles where the positioning of the tiles will be out of alignment and somehow shifted say few cm away from the original position. The preview windows shows the texts effects alignment correctly but not when I exported the video.
The titles alignment will not be WYSIWYG (What you see is what you get.) Please advise. Thank you very much.

As ATR points out, this is not directly possible in PrE. PrPro CS4 allows one to just do a new Sequence (think of a mini-Project inside a Project), but that is the best.
I have not tried Paul_LS's method, though I have done other editing of the .PREL and PRPROJ (same type of file for PrPro) files in WordPad.
I'd do a Save_As (maybe increment the filename by 1, or "test") and work with that file, in case something goes horribly wrong. It should work, but you do not want to run the risk of loosing everything, even if you are likely to have to start from zero.
Because PrE does not allow for two, or more Projects to be Open at the same time, and will not run multiple instances of itself, the simple Copy/Paste does not do us any good. PrPro, with its Sequences, does allow for Copy/Paste between the Sequences. However, there is a program Clipmate, that allows for the Copy/Paste between one Project and another. I have not used it, as I use PrPro and have not needed it. Robert Johnson did several articles on Clipmate and it seemed to work well for many folk. I do not know if it's freeware, or shareware, but Google will track it down for you.
Good luck, and glad that it was just the Project Preset and nothing else.
Hunt

Similar Messages

Black video after exporting sequence in FCP7 - help please!

hello,
So i'm not doing anything new - i've edited my clips as usual, settings are all as usual, but after i export the finished sequence and try to play it back, all i get is a black screen, with audio, for the entire duration of the sequence.
in the canvas it plays back fine, theres nothing to render, i've tried both with H.264 and Apple prores 422 HQ and nothing, i have tried to export as QT and also using QT conversion, checked the video settings there, all good, the video is rendered, also i checked the video processing in settings, used both render in RGB and render in 8 bit YUV, but no luck.
and i dont think it has to do with in and out points because the black video I get IS the duration of the audio, and the whole sequence for the matter.
The only thing I am wondering about is that I added some png files to make "gifs" over the video - I exported this same video BEFORE adding the pngs and everything was fine, but it is after adding these still images that the whole video goes black after exporting. But I have done similar projects before, with the same type of files, and I have never gotten this problem.
note; there are only a few of these still images scattered over the sequence, the majority of the video doesnt have these pngs over, but it is the whole of the video that goes black after exporting.
Can someone help me please, i dont know what else to give a go at and i cant find answers to my problem online!
many thanks.

Could be your sequence is corrupt. Create a new sequence with the same settings and copy everything from the old sequence to the new sequence.
If you need help with this post back.

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you helpe me change this back please?

Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?

I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Audio problem after exporting videos from imovie.

When I export videos I've made in imovie, the audio becomes distorted. Clips that I have silenced, start to play during clips that they don't belong to. Any fixes?

Hi
How did You Export videos ? To what and into what format ?
If to iDVD then
• First I would trash iMovie pref files and iDVDs likevice
• Then in iMovie - Share to Media Browser and as Large (Not HD or other res.)
• Then in iDVD from Media button Movies import it.
• Then test play in iDVD Preview
• If OK then - Save as a DiskImage
• Test this with DVD-player tool
• Still OK
• Then burn it to DVD either via iDVD or if You don't wat to re-calculate - use Disk Util tool.
(set down burn speed to x4)
Yours Bengt W

Color quality after exporting video

I am trying to make a video with all of my photos, and after I export the video, the quality of the images totally gets ruined. The color is not as vibrant and the images are not as clear, I am using the highest mode to export, so I was wondering if there is anything that I can do to improve the quality!

I figured it out. I had to reduce the size of the exported file. It looks a lot better now.

Why does "Â" show up in image title after export?

This drives me nuts. When exporting files, the title changes on my images. The character "Â" appears within the title of my image. It's doesn't appear when I look under Library>Metadata. So everytime I use the exported files on my blog, I need to go in and change the name to a whole gallery of images.
Please help.

portergraph wrote:
LR/Mogrify - been using it since LR came out for years without issue and now lately using LR3, I get that character.
I would try disabling LR/Mogrify just to see if it's in the game. Are you aware of the fact you need LR/Mogrify 2 on LR3?
Beat

Video getting 'stretched' after export.... help?

hi guys...
ok, i have a movie i did in FCE, its just an audio file with keynote slides that are synched to it.
The slides are jpgs, and are 1024x768 in size.
I made a movie, it looked great.... went back to FCE to make some edits, then re-exported it... problem is now the new movie looks a bit STRETCHED....
thats like the only way i can describe it.
everytime i save etc it takes forever so i'd like to get this fixed... lol
I just need the thing to look normal like it did before.... i'm really new with FCE, self taught (and thanks to the help of many of you guys
I think it has something to do with the export.... i selected 640x480 to export it at, i thought thats what i did before.... and thats the size i need the movie in.
seems like its getting stretched somehow
suggestions?

dconstrukt wrote:
jpgs, and are 1024x768 in size.
export.... i selected 640x480
1024/768=1.33333
640/480=1.3333
So why is it stretched?
I think you might be encountering a pixel aspect ratio (PAR) issue.
Standard definition video, the type used on DVDs, uses 640x480 pixels,
but the pixels are not square. They are stretched to make the end result
720x480. Normally this all happens automatically, which is why many
people don't even realize it's happening.
My suggestion: Set your FCE sequence to be the exact size and format you
want. When you export, don't use Quicktime conversion to adjust the size.
Deal with all the issues in FCE before the export.
Assuming you are working with standard def video, choose a preset
like DV-NTSC 48kHz. When you bring your jpg files into that, you may
have to adjust them in the Motion tab.
Of course, if you really want 640x480, then you can modify the
sequence preset (Sequence Menu > Settings) to set the PAR to square.
Then your 1027x768 images should fit the frame exactly.

Adding titles after exporting large movie

Is there any way to add titles to an exported file simply? I just want to add on title to a section that I forgot to put in. I really don't want to wait another 4 and a half hours for imovie to export a new large movie. Any suggestions?

I suppose you could use QuickTime Pro to cut out just the portion of your movie needing titles and import that back to iMovie.
When you're done, export and copy and paste it back in again using QuickTime Pro.
http://www.apple.com/quicktime/pro/
It costs a few bucks, but QuickTime Pro is a handy tool to have around.
Matt

After exporting video project the quality is poor

Why is this? When I used to use Windows Movie Maker the quality was outstanding. I would think iMovie would be a lot better than Windows Movie Maker? Any help would be appreciated.

I figured it out. I had to reduce the size of the exported file. It looks a lot better now.

Error when converting videos for ipod--help needed please! : )

it keeps saying "unknown error occured -3000"
*** is that supposed to mean? : )
i think i have the 5th generation ipod. its the larger gig video one that came out last octoberish.
i just did the latest updates so i don't really know what else to do & i hate going to the genius bar at my mac store--its in a mall--blech!
any help would be much appreciated--thanks!
ibook Mac OS X (10.3.9)

Where are the videos from? are they from a creditable source or from an illegal downloading site such as limewire. most of those videos are not in the correct video format to begin with so apple itunes will not recognize them and convert them. The best way to convert video is to rip your own dvds or home movies and put them on your computer then ipod. There is at least one way on each operating system (windows and mac) to rip your own dvds and then transfer them to itunes and finally put them on your ipod. A mac is the easiest of the two ways. If you have a mac, then you download a program off of the web called handbrake. Simply "google" >handbrake rip dvds< and its homepage should pop up or try <a class="jive-link-external-small" href="http://">http://handbrake.m0k.org). Handbrake allows you to copy and convert your dvds to ipod format. On a windows operating system the most effective way I have found to rip my dvds is quicktime pro($25-$35). You can buy it at quicktime's website. It basically does the same thing as handbrake. I, myself, have simply converted some videos, like sports shows and commercials, to ipod format using itunes and both the video and audio worked fine.
If you have any ?'s just reply back
I hope this helps!

Slow PDF printing after upgrading to Acrobat 6 - Help Needed

When I used Acrobat 5, my 95ppm printer printed pdf files at that speed (I generally throw several thousand page PDF docs at it at a time). Now since I upgraded to Acrobat 6, printing is MUCH slower. Nothing has changed other than the version of Acrobat. What is going on and is there anything I can do about this? Thanks in advance!

I'm just going to give this a little bump with a little more info.
It doesn't seem to matter if I set the printer up localy or over the network. I have tried several computers (WinXP and/or Win2003) and all with the same results. This is crazy if this is "just how it is". How is a printshop supposed to keep up when people are bringing in PDF docs made in Acrobat 9, but the newest version we can get to print in a timely manner is Acrobat 5. Its not that it takes a while to get up to full speed. We deal with huge PDFs and, with Acrobat 9, a print job can run for hours without speeding up at all.

Odbc connection drops after some time over vpn -- help needed

hi,
sorry to tell u that i am not able to find the right suggestion/ solution in previous posts in this forum. my problem is like this:
I am running oracle database (11g) on windows 2003 server. my oracle client (9i) is accessing database on that server. if the server is on a simple LAN, all the clients are able to login and the connection is lasting fine. recently, the server is configured in a VPN. now the clients are not able to sustain the connection for long time, the connection is getting dropped within minutes. whats the problem with VPN? even though the cluster configuration (VPN) is said to be done properly, whats going to be the problem?
my client side application is with VC++ and using ODBC for accessing database. with oracle Net Configuration Assistant, the connection is working fine even on VPN, but when my application is trying to access the database over VPN, the connection seems to be intermoittent. please suggest me in this regard. thank you in advance.
swamy.

hi,
sorry to tell u that i am not able to find the right suggestion/ solution in previous posts in this forum. my problem is like this:
I am running oracle database (11g) on windows 2003 server. my oracle client (9i) is accessing database on that server. if the server is on a simple LAN, all the clients are able to login and the connection is lasting fine. recently, the server is configured in a VPN. now the clients are not able to sustain the connection for long time, the connection is getting dropped within minutes. whats the problem with VPN? even though the cluster configuration (VPN) is said to be done properly, whats going to be the problem?
my client side application is with VC++ and using ODBC for accessing database. with oracle Net Configuration Assistant, the connection is working fine even on VPN, but when my application is trying to access the database over VPN, the connection seems to be intermoittent. please suggest me in this regard. thank you in advance.
swamy.

Audio and video out of sync after exporting sequence

I'm a FCP user since years, but not so common with HD footage. Therefore I have an issue with my finished edited movie after exporting: Video and Audio are out of sync.
My sequence settings are: HDV1080i50, 25fps, 48kHz, 16bit, Stereo. I used File-> Export-> Quicktime Movie -> Current Settings
Sequence has a duration of 61 minutes and 38 sec. I tried to find out where's the problem and exported audio and video seperated. This results in:
Video is 61 minutes and 27 sec long
Audio is 61 minutes and 38 sec long
That means exported video is shorter than original sequence.
What could that be ?

I had the same problem with a Panasonic camera, even filming at 30 fps. I was able to fix it; see [this thread|http://discussions.apple.com/thread.jspa?threadID=1783029&tstart=0]. It's a frustating problem, to be sure. You might have to use Easy Setup a couple times before you get things to work properly. Not sure why that's the case.
Good luck!
Message was edited by: Anthony M Kassir MD

PE11 has more limited video export formats that PE7?

I upgraded to PE11 but now I find I have fewer video export options. For example, for YouTube I used to export as Windows Media (WMF) at 720p/25, and I had full control over many settings. Now, I find if I choose Windows Media I have a very limited choice of options and the resolution is limited to 720x480. If I choose AVCHD at 720p I get big MP4 files that look terrible. Likewise, HD 720p/25 gives a large and not great-looking MPG file, while HD 720p/25 High Quality confusingly gives a smaller-sized (but equally inadequate) MPG file. Again, Quicktime export offers me only a few options, none of which is 720p, where in PE7 I could choose from a much larger set of presets and change all the parameters. If I choose 'export Flash video for YouTube' I get only a few options, none of which is 720p.
Am I just missing how to do this, or does PE11 really have many fewer options for exporting video than PE7?

keysound
In version 7, you had 2 export routes, File Menu/Export/Movie and Share/ with choices for Disc, Online, Personal Computer, Mobile Phones and Players, and Tape.
In version 11, you do not have the File Menu/Export/Movie route, but you do have Publish+Share (the new generation) Share with a vast selection of export choices. I will not go over them, but for now will address only two of your points in your post.
1. As for QuickTime. Make sure that you have the latest version of QuickTime. QuickTime installation on the computer with Premiere Elements is required to see the QuickTime choices. Assuming that you have done that, then set an appropriate choice for Presets in the export dialog and then go under the Advanced Button/Video Tab, Audio Tab, and, if applicable other of the preset to take control of your video and audio settings.
2. SG has already suggested to you a choice for a file to be uploaded to YouTube at the YouTube web site that should give you best results.
3. But, as an example, here is how you get your old "Windows Media 720p25" export from Premiere Elements 11 Windows.
Publish+Share
Computer
Windows Media
Presets = 720 x 576 16x9 25
then under the Advanced Button/Video Tab of that preset, set as follows
You have full control over those settings. The bottom which is not visible in the screenshot shows "Average Video Bitrate = 1500 kbps (aka Kbps and representing kilobits per second).
Please review.
Thanks.
ATR

Sound problems after export media in premiere pro cs6

hello,
i recently started usining premiere c6 and after exported my project to mpeg-dvd i noticed that sound quality is reasonably lost, than exported sound separatedly without video to wav and result was the same bad. The imported sound source was really good, recorded in studio- wav 24 bit 48000. Before i used cs3 and never had such a sound problem after export video.
thank you very much,
Poly

It's difficult to speculate without hearing the original and the export. Can you upload them?
https://www.depositfiles.com/en/

Misalign animated titles after exporting videos in PE7- help needed

Similar Messages

Maybe you are looking for