Miscellaneous Change(s) warning on Signatures panel when document signed twice

Hello,
I used Acrobat XI (the latest evaluation version) to create a document with two certificate-based signatures. For some reason, when viewing the document in Acrobat XI or Reader X, the following warning is displayed between the signatures on the Signatures panel:
1 Miscellaneous Change(s)
Left-clicking or right-clicking on the warning does nothing, and no further details about the changes are provided on signature properties dialogs either.
Could you let me know how can I overcome reporting this warning please? I didn't alter the document between signings, so I am fairly sure that no changes were introduced to it. I am attaching a screen capture of what I'm concerned about. Just let me know if you need the document itself, and I'll be happy to send it over.
Thanks in advance and have a nice weekend,
Innokentiy

Hello JP,
Thank you for the clarification and a suggestion how to overcome the issue. Still there is a question as to why signing an empty field is not counted as a change, while adding a brand new signature (without altering the document in any other way) is.
I am worrying that our users will be frightened by the 'miscellaneous change' message (at least until they have a clear explanation that the 'change' is only related to the signature), so we will probably end up employing the empty fields-based solution... which also has certain lacks. In general case we don't know the number of signers beforehand, so we will have to create a dedicated page with 6-8 empty fields to cover for the maximal number of signers. Next, as far as I understand, the document can be signed by anyone if it contains unsigned fields, - in other words, say, the 3rd signer can't prevent the document with 8 unsigned fields from being signed for 5 more times in future (as he would normally do by 'locking the document after signing'), can he?
Thanks and best regards,
Innokentiy

Similar Messages

  • I want to change my credit card payment but when I signed in,the itunes always said "This apple ID has not yet been used int the itunes store."

    I want to change my credit card payment but when I signed in,the itunes always said "This apple ID has not yet been used int the itunes store." And when i clicked the review button, the create apple id appears. Can someone pls help me? Thanks.

    FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
    http://support.apple.com/kb/HT1311

  • TS3988 i changed my apple id email and when i sign into iCloud on my phone it still comes up with the old email and my password isn't working for it?

    i changed my apple id email and when i sign into iCloud on my phone it still comes up with the old email and my password isn't working for it?

    Try going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Change of G/L Account Number when document is parked

    Hello,
    I have parked one document, but i have made mistake at the time of entering G/L Account Number. Can i change this account number ? Please advise me. I have used Tcode FBV0, eventhough it is not helpful to me.
    Thanks in advance for your kind co-operation.
    CA SANJAY DARJI

    Hello Dear friend.
    You can Edit here from the Menu Document>Change.
    Or Else Do one thing If you have already parked the Document ,
    Take that Document number and go to Fb02 and make the changes
    Regards.

  • Signature panel 'hangs' when viewing a signed document

    Hello and Merry Christmas to everyone,
    I am facing a problem when viewing a document ( https://drive.google.com/file/d/0B1wk9toh5e7AekxUcGM0RVc4Z2c/edit?usp=sharing ) with Adobe Reader. The signature panel appears to be frozen (not initialized), and it is not possible to access any signature details at all.
    Note that the document contains two invisible signatures. Whenever I remove the second signature manually by truncating the document, the signature panel is shown as expected.
    My environment: Windows 8.1 x64, Adobe Reader 11.0.5. Interestingly enough, the document and the signatures are shown correctly by Adobe Reader 9. I am attaching a screen shot of what I am seeing with Adobe Reader 11 below.
    It would be great if someone lets me know why this is happening and whether Adobe are going to fix this.
    Thanks in advance,
    Innokentiy Ivanov

    A quick update following my own investigation of the issue. Apparently, the problem is somehow related to annotation objects on the first and only page. Whenever I remove the /Annots entry from the page object (e.g. by renaming it to AnnotX to preserve the overall document structure), both signatures are rendered correctly. I've uploaded the updated document here ( https://drive.google.com/file/d/0B1wk9toh5e7AYllGbkJwZmZvR1E/edit?usp=sharing ).

  • Access 2010 warn "System Resources Exceeded" when change machine

    My Access file has 1.2GB and need to run a lot of simple Update SQLs. The program run well on my old PC.
    I recently change the PC from Core 2 Due to I5-4570S. The Access
    warn "System Resources Exceeded" when running. I use the old PC to run and it is ok. 
    My old PC is E7500 2 GB ram, Win 7 (64bit) + Office 2010 (64bit). New PC is I5-4570S with 8GB ram, with same OS and Office. Why the system resources would exceeded on my new machine?
    I searched many websites for this and cannot find a well solution. Does anyone know how to solve it?
    I have posted this question on Access 2010 help forum before, please refer to:
    http://social.msdn.microsoft.com/Forums/office/en-US/60810447-2f18-452e-b752-c23bda4a67aa/access-2010-warn-system-resources-exceeded-when-change-machine?forum=accessdev

    I don't use ODBC. I use ADO with ACE connection string to connect database.
    The Access version of new pc is newer than my old pc already.
    I tried in different PCs with different setting and found that in 2GB ram, the program is stable. If 4GB or above, the error appeared. 
    The error does not appear at the same command all the time. It may not appear sometimes. If I try to compact the database and re-run the command, it may pass, but not always. 

  • Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3

    Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3 Web Premium with Acrobat Professional 8.  I use it fine on my old computer with Windows XP.  I recently got a new laptop with Windows 7.  I installed all my Adobe programs, and I think they are working.  When I look at Adobe PDF in the device section of the Control Panel it looks okay.  But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens.  I have tried printing both as File>print and using the PDF tab on the top menu bar.  I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot.  I look at the document list and it says status "error".  When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print.  I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess).  I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work.  I think I successfully reinstalled using that dll file- no errors came up anyway.  But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice.  Help?

    I just compared the properties between the two computers.  On the old computer it has the port as "My Documents/*.pdf".  On my new computer it lists the port as "LPT1".  I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied".  I then tried to create a new port on the device control panel.  I tried to create a local port "My Documents/*.pdf" port but was denied.  I ten tried to create a new port type and control panel asked for an INF file.  I wonder if this is where my problem lies.  Thoughts?

  • How to get rid of scroll bars in sub panels when displaying a VI which is part of a class?

    I am writing an application that applies different analyses to a set of data. The program must be flexible configurable. To not clutter the GUI with too much elements I ended up with the idea to load the needed user interfaces for each specific analysis dynamically into a single sub panel when needed. This works well without any problem.
    Due to the fact that all analyses share some common functionality I have decided to use LabVIEW classes for implementation. Each class has one VI representing the user interface to show in the sub panel.
    This works also well BUT the sub panel always shows a horizontal and vertical scroll bar I don't want to see!
    I have already learned that I need to change the user interface VI to a custom "Window Appearance" and disable the "Show scroll bar" properties. But this seems to work only for "normal" VIs but not for VIs that are part of a class.
    Any ideas?
    Ingo
    Solved!
    Go to Solution.

    Thanks Pixar, this was the right tip!
    Although: there seems to be a difference between "normal" VIs and VIs that are members of a class.
    For "normal" VIs it is sufficient to set the property to "Off While Running" and it works as expected.
    VIs part of a class need the "Always Off" setting" which is only accessible via right click on the scroll bars but not via the VI's properties box.
    Thanks and Regards
    Ingo

  • Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code

    I get this message when I check the Device manager for my Ipod
    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
    How do I resolve this I have reinstalled iTunes but it still doesn't recognise my ipod

    I reinstalled Itunes a couple of times.  I unistalled all programs that I never use, I updated all of my drivers, Windows swept my computer and found no problems.  I have a yellow causion lite when I look at the USB-port with the phone connected.  All other devices work without a problem.

  • After Effects Warning: A problem occurred when processing OpenGL commands

    Hi There Fellow Adobe After Effects Users.
    Please could some one help assist me with the following error i am getting.
    I bought a template and needed to do a logo animation reveal. It was done using After Effects CC for PC.
    AE had to then convert it to Mac which did so successfully. I was able to modify, add my logo and render out.
    The following day i opened the file again and it gave me the follwoing error:
    "After Effects Warning: A problem occurred when processing OpenGL commands"
    What is confusing to me is that this issue would normally appear if my graphics cards did not support OpenGL, and it would not have opened in the first place if it was not supported.
    My graphics card is a - ATI Radeon HD 5770 1024 MB - running Mavericks OS. So i know that this card does support GPU acceleration.
    Please could someone point me in a direction that will fix this.
    Thank you so much

    Thank you for the update Mylenium.
    If I look at my display info, the card says OpenGL engine. Does this mean anything?
    If it's not supported, then what's the point in purchasing a Mac If you cannot use AE's full capacity. Mac doesn't put Nvidia cards in there machines and on the Adobe website, ATI cards ate not listed; but in the same breath it says that most ATI cards that have come out in the past 5 years are supported. Surely Adobe and their technicians must have spoken with Mac technitions.
    I am considering to buy the new Mac Pro; but am definitely going to change my mind if I cannot use AE's full compatibility. I don't see why spend so much cash if the cards aren't great.
    Please could you then tell me what functions to switch off in the project file. I'll get the guy whom I bought the template from to switch of those functions.
    Thank you.
    Have a great day

  • XMP data not showing up in the custom file info panels when upgraded to CC

    For several versions of Photoshop, I have been able to use a modified custom file info panel to input, update, and track psd files. With each version of photoshop there are always some changes in the way the object data is handled. The lastest challenge is:
    1. XMP data not showing up in the custom file info panels when upgraded CC from CS6.
    2. Raw data is not visible in CC in the File info panel.
    3. This occurs in new documents where we create the xmp wrapper while the file template is built.
    4. When metadata is manually entered into the file, the data is not added to the XMP wrapper when it is recreated on the save.
    5. When a file that was created in CS6 is opened that contains the Metadata in the file info template. It is visible. the Raw data is also visible. Once the XMP wrapper is recreated - write and then close. The data is no longer available. the Raw data will not pull up in the file info panel.
    Any feedback or a direction will be appreciated.

    I have a script that the user runs to input xmp data into a Customized version of the generic file info panel. it is data that is gathered from the user when the psd file is created. once the file is open in photoshop. the information is visible in the File info panel , the raw data, and as a schema addition in the advanced tab.
    in CC the nodes and the children of the XMP packet have changed positions. so that the XML -this.XMP.child(0).appendChild(this.createNode())
    is no longer the node that can be appended.
    Where XML.child(0).elements().length(); would enable the xmlns to be added in CS6
    <rdf:Description xmlns:phsa="' + this.namespace + '" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:x="adobe:ns:meta/" rdf:about="" />'
    it is visible in CC as namespace in a different arrangement. XML.child(0).child(0).namespaceDeclarations().toString()) and the children are  XML.child(0).child(0).elements().length().toString()); There are now 7 child nodes where before there were 1.
    with all shifted, the initialize of the values and the delete XMP packet wrapper and create new or the amend to the XMP packet wrapper is undefined.

  • I updated and changed my apple id and email address on my computer but when I sign in on my phone it doesn't recognize either account now.  help

    If I delete my icloud account so that I can get one that matches my apple id and email and password that I updated due to a new email address, will I lose my contacts and pics and calendars on phone that were synched to icloud.  It keeps warning me when i go to delete that any contacts etc saved in the cloud for the device will be lost.  If I cant delete this icloud account how will i ever have one that has working email, etc. or attached to my apple id account.  I can't even download apps on my phone now bcause it says my id or password is wrong but the account name id on phone and cloud shows up as old inactive address.  I can't even retype current one in box

    If all you did was rename your ID, you can go to Settings>iCloud, tap Delete Account, choose Delete from My iPhone when prompted, then sign back in with your renamed ID.  Deleting the account only deletes the account and any data you are syncing with iCloud from your phone, not from iCloud.  Provided you are signing back into the same account and not changing accounts, your data will be synced back to your phone when you sign back in.
    If, however, you are changing to a new account with a new ID, choose Keep on My iPhone when prompted.  Then choose Merge when you sign into the new account and turn your iCloud syncing back on to upload your data to the new account.
    Before deleting the account, save you photo stream photos to your camera roll (tap Edit, tap all the photos, tap Share, tap Save to Camera Roll).

  • Why can't I add text in the signature panel in firefox?

    why can't I add text in the signature panel in firefox?  I have adobe acrobat pro XI.  I can open a pdf in acrobat pro and am able to add text to a pdf, but when I open a pdf in firefox, the "add text" option is not available.

    When you install Acrobat XI you are also installing Reader for use in the browser. Reader is "sandboxed", or as it says in the Preferences, it is in "Protected Mode". Acrobat does not understand the concept of running in sandboxed memory (sandbox is a security feature to prevent the bad guy from exploiting a memory error and getting into a memory address where they can do damage to your computer) so to help protect Acrobat users the same way Reader users are protected we just install Reader along with Acrobat, but it is only used in the browser (part of this is because the bad guys use web sites as their primary method of distributing corrupted PDF files that can cause problems).
    That said, because you are in Reader the file needs to be Reader Enabled prior to being posted to the web site (or opened in the browser). Once the file is Reader Enabled you should be able to add the text annotations.
    Steve

  • When i try to click on signature field to digitally sign in adobe reader version 9.5 , it does nothing. please explain

    when i  click on signature field to digitally sign, in adobe reader version 9.5 , it does nothing. please explain and help.Urgent

    Hi,
    2 things:
    1. Assuming your script is original - it is not asking for a TXT file till it is found in expected location. You can choose between 2 solutions:
         to remove FindChangeList.txt from FindChangeSupport folder ==> script will ask for another file
         to override this file by your query ==> script will not ask but execute your query
    2. You can see greyed TXT files in Script Panel since this panel shows executable files (script's formats)
    Jarek

  • Matser Table/Detail Table -- Hide detail panel when no row

    Hi,
    I would like to hide the detail panel when the user selects a row in the master table without detail.
    I try to put something like this:
    <af:panelHeader
    rendered="#{bindings.MyView2.estimatedRowCount>0}">
    But it does not work, instead the previous detail rows are display when there is no detail rows for the master row.
    I need to to press a button <af:commandButton text="Apply change"/> , to render the page correctly.
    The selection facet used in the master table is defined as follow:
    <f:facet name="selection">
    <af:tableSelectOne autoSubmit="true"></af:tableSelectOne>
    </f:facet>
    Where am I wrong, it is my first project with ADF ?
    Any help will be appreciate,
    Thanks,

    Well not really clear if it's a bug or not, but here's two workarounds:
    1- the table is surrounded by a panelCollection, if we add a partial trigger from the panelCollection to the table, on every change of row selection the table refreshes itself.
    2- The second option was to remove the primary keys from the entity, and force it to use RowId as the primary key.
    This is such a weird behavior in ADF, it's one of the basic things that one will do in an application. We tried to do a test on a smaller app and it gave the same results.
    Here's the scenario:
    Master/detail linked by two keys
    Master PK (key1, key2)
    Detail PK (key1, key2, key3) => key1 and key2 are the link between the tables.
    If anyone can reproduce this and confirm if it's a bug, it would be greatly appreciated.
    Mo

Maybe you are looking for