Mismatch in PS reports BW vs R3 Standard reports

hello Gurus,
I have loaded the 0PS_C04 (Controlling) for PS.
The Budget data comapared to R3 figures are matching perfectly.
Bu the Actual Cost show big difference. The R3 data using tcode:S_ALR_87013558 shows a very different Actual Cost.
The report in BW is the standard report WBS Elements:0PS_C04_Q0004
I tried filtering on Valuation View,Vtype,0metype etc....
Is there any config setting in R3 for PS....
This particular is coming in BW production data.
In BW Dev the figures are right compared to R3 Quality server....
thanks in advance.

hi,
I got similar problem in BW (Project systems) report on 0PS_C04.
The Cost Plan and Revenue Plan data compared to R3 figures are matching perfectly. Bu the Actual Cost show big difference. I am using sap delivered restricted key figures.
Can any one please help me to match my Cost Actual and Revenue Actual with R/3 Data
Thanks in Advance
Rajesh

Similar Messages

How to call Report 6i/9i Oracle Standard Report into Discoverer 10g

How to call Report 6i Standared report into Duscoverer 10g as there is a requirement to create or transfer Oracle Standard report into Discoverer.
1) Account Analysis Subledger Details(180 Char) - Standard Report 6i as i want the same report in Discoverer 10g.
2) Aging Report -- 7 bucket --Standard report in 6i,how to transfer in Discoverer 10g.
Is is possible to Transfer from Report 6i to Discoverer or How to Create this report in Discoverer 10g.
Please advice,
Sushant

Well, if I had to do it, here's how I'd start.
1. Get the SQL from the Oracle Report and then create a database view that's more generic based on the SQL but still gets the answers.
For example, you'd not code many conditions, etc. but the database view would be pointing to the correct Oracle Apps tables / views.
Once you've got the view, bring it in to Disco Admin, etc. and create a report from it that now adds the extra conditions needed. That way you can use the underlying concept without hard coding things like dates, etc. which you would ask the user at run time.
However ... as you may well know ... Oracle Reports can do some 'strange and/or powerful things' on the fly and, for example, it may be something like a temporary table generated for the report, etc. so may become a much bigger issue.
2. If you have NoetixViews views then they'll most likely already have the views for these queries already created as they're reasonable for what's needed in an Oracle environment.
3. I'd see if there is already a pre-defined BIS view that covers this as well. Again, you're in an area that's pretty popular so if a BIS view already covers much of the same info then you've got a create view 'head start' already. Check views owned by Apps starting with the application plus FV or FG (the one you'd really want) such as: GLFG_Budgets_To_Actuals to see what I mean.
Russ

Need to find All Custom Reports which are based on SAP standard reports

Hi Specialists,
I would like to find out all the customized reports which are a copy of SAP standard reports in the client's system.
For Eg. RPCP11G0 is the SAP standard report which has been customized & it's code has been re-written into a Custom report i.e. ZGBPPYMP001_P11D.
I would like to know all such occurences in the system.
Steps already done:
1) Tried searching with RPR_ABAP_SOURCE_SCAN & RS_ABAP_SOURCE_SCAN.
Please suggest .
Thanks
Abhinav.

it's only possible with an tool-program
when your developers have not change the line with the REPORT-command.
e.g.
standard-report is RAGITT01
copy is ZC_RAGITT01 or sth like this
but report line is unchanged in copy: "REPORT RAGITT01 MESSAGE-ID AB..."
solution:
select all reports from TRDIR/TADIR from your Z/Y-device classes
and analyse the reports with
read report ZC_RAGITT01 into wa.
and use find for searching 'report-command'.
and check whether the result of that finding is an standard abap
hope that helps
Andreas

Adding extension "line-size 255" to a standard report on the first line

Hi Experts,
i want to modify the statment from Report ztest1 message-id zm to Report ztest1 message-id zm and line-size 255.
I am going to add the extension line-size 255 to the report statement in a standard report. There are no enhancement points near the first line. I have access key available, so i can make the changes to core mod.
The problem is that if i run the report in background, out of the 8 fields, i only see the first 6 columns in the spool. remaining 2 fields are truncated.
The reason for truncation is bcoz the line-size extension is not given to the report. What procedure do i have to follow to add the extension line-size 255?

HI,
You do not need any enhancement for it.
If you have the access key then just add the additon line-size 255 to the repport statement.
Regards,
Ankur Parab

1099 Misc reporting for US in SAP Standard report not containing any value

HI All,
In my current clients requirement is to get the SAP Standard reprort for 1099 Misc reporting for US
1) Accordingly i have done configuration for Withholding tax for US with tax type FE
2) There are 14 WHT Tax codes under FE , like 01 = Rent , 02 = royalty, 03 = other income etc.
3) Assigned Tax type with Co. Code
4) Activated WHT tax at Co. code
5) Created WHT country US
And also assign WHT tax type FE and respective tax code to vendors in Accounting info in Vendor Master
Posted couple of vendor invoices and made payment for those also
Then after this when i run the SAP Standard report for 1099 Misc reporting for US , then the output contains with no data.. but only contains vedor names and WHT tax code which i have assigned..
I think i have missed some configuration may be . Can any one let me know the detail step by step config and process how to get proper out put in 1099 Misc reporting for US in Standard reporting..
Regards,
Sandip

Hello auroar,
I followed the path that you provided and that lead me to this part of the tree: Define File Format for Withholding Tax Reporting...This is where I found the information that I needed.
Thank you very much.
-Patrick
Edited by: Patrick Smith on Oct 22, 2009 8:41 PM

Standard report throws the error - 'LOAD FAILED, INTERNAL ERROR'

Hi there,
When i run lead origin report or any other standard report, the error says 'LOAD FAILED, INTERNAL ERROR' as mentioned in screen shot. The same i checked in QA server too and error analysis says ''define the correct currency default is EURO''
All the standard reports has the same problem.
* these reports are running in UI.

Hi Himanshu,
Where is the detailed error screenshot in SAP GUI.
Thanks,
Faisal PC

Suppress Messages when calling Standard Report AR02 with SUBMIT report

Hi there,
I've seen quite a few posts on this topic, but have not found an answer that works.
I have created a Fixed Asset FI report which calls SAP Standard report for tcode AR02 (Program ragitt_ALV01) a number of times and uses the data that is passed back.
The problem is that if run for a previous closed fiscal year, an Info message pops up multiple times, which is annoying. I would like to get rid of this.
I've already made a copy of the AR02 Program RAGITT_ALV01 to try and stop the message, but as this is based on a logical database, I can't get to the source of the message as in normal report code.
If tried various options for the SUBMIT keyword, without success.
Any thoughts, suggestions appreciated.
Thanks,
David

Hi Nabheet
thanks for reply. I can see the MESSAGE statement alright, by using the debugger to stop at MESSAGE but the problem is that it is deep in SAP standard code, within logical database functionality, so I can't make a copy of code and comment out the line.
I have also tried to "switch off" the message(AU172) in T100S - without success.
Thanks,
David

Report error while download the report.-ORA-06502

*"report error:ORA-06502: PL/SQL: numeric or value error: character string buffer too small."*
When I trying to download the classical report,It give the above error when report having the more than 26 column to print,
The download report format what ever may be except .csv.
Any solution for this?
Edited by: 945115 on Aug 29, 2012 12:35 AM
Edited by: 945115 on Aug 29, 2012 12:35 AM

Pratap.,
Error in classical report download by print server link.This is a PDF output that your are generating?
Which Report Server have you configured? This error is coming from Report Server.
The Standard Report Server has its limitations. If are using Std then maybe you have hit one of them.
Cheers,
PS: Change you handle to something better than 945115

Customise Sap Report -- Add logo and change report layout

Hi All,
I have a requirement to amend sap standard report to add logo and change layout, could some one pls point me to teh right direction. Should we .1 Create a new smartfrom if yes -- how to to create smartfroms
2. Should we create new Zreport...3. Is Adobe Interactive forms any good---- cld you please share the steps to create Adobe Ine Form 4. is sap script any good way in my situation
Thanks
Smith

Changes to SAP Standard are always a bit tricky, specially if we are talking about legal reports. If the standard report uses smartform, you can change the standard form without needing a SSCR key, so no need to create a Z report or smartform even, but like every change on SAP Standard, if further changes are made by SAP through Support packages you will always have to replicate them yourself everytime this happens. I would suggest creating a new Z report by copy of standard and new Z smartform, that way you can always recurr to the standard and see what was changed and then replicate them in you Z reports.
To create smartform, go to TCode smarforms and you can create one by copy of an existing smartform.
Adobe Interactive forms is more complex then smartforms and unless the standard uses a print form, i would not suggest you creating one as it will envolve a bit more knowledge.

Difference in GL Balances between two Standard Report fbl3n and fagll03

Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK         Description    Amount
86         GR/IR             1000.00
31         Vendor           -800.00
50          TDS               -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK         Description     Amount
21         Vendor             800.00
40          TDS                 200.00
96          GR/IR            -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          -200.00 -
> ?????
*OPEN ITEMS          - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          +200.00
*OPEN ITEMS                0.00
PLEASE HELP
Regards
Soumitra Bhattacharya

Hi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram

Standard report appended image

Hi,
I'm using XPsp2, LV 2011sp1, standard report, append image VI.
The appended image appears at a low resolution (screen resolution?) when printed. Text is perfect.
If i resize the image to a larger resolution (dpi) it resizes it to fit within the margins but retains the low resolution. The auto-re-sizing results in a distorted image if it is resizes to fit the width, but does not need to resize to fit the height.
Can i increase the resolution of the printed images in the report? -to 150 or 300 dpi so they do not looks so pixelated when printed?
Thanks.

To follow up, the response from an email support request.
"Hi Blue,
Thanks for the information; it was really helpful in understanding your problem further. I've managed to print out the exact same type of response as you've been getting; the larger DPI image just comes out a lot bigger for Standard reports than the smaller DPI image. I also dragged the files into MS Word and saw that the images were resized appropriately. Interestingly enough, I set the type of the report to 'Word' and when printed, the images came out at the appropriate resolution. This means that inside of the MS Office programs, there is some internal compensation for recognition of image DPI scaling that isn't native in the Standard report in LabVIEW.
I also selected to print a 'HTML' implementation of the report. The images were again mismatched in this state.
Q: How do we work around this issue?
A: There are two options I see at this point. We can either try reconfiguring the DPI of the printer that we're printing to, or we can take a copy of the resized image in Word by taking a snap of the screen and then cutting the resized image out. I just tried this out and the resized image that I cut out from a printscreen of MS Word looks just as expected on the report.
I took a look inside the Report Generation VIs that were used for printing and I couldn't find any aspects that we could modify to alter the interpreted DPI of the images. This is because the lower level print functionality is hidden within the higher level LabVIEW Property Nodes and is therefore inaccessable from any Block Diagram code. In this regard, I don't believe that there are any direct features native in LabVIEW that as LabVIEW Users, we will be able to modify. I made a VI to resize the image in LabVIEW and then print the output, however the issue with this is all of the quality in the original image was inevitably lost.
You can head over to the LabVIEW Idea Exchange and post this feature request on the forums and get other LabVIEW Users to Kudos it; the higher the Kudos, the more change of the feature being incorporated into a newer release of the toolkit. I definitely agree that this would be a great feature and I'd be more than happy to contribute.
LabVIEW Idea Exchange -
http://forums.ni.com/t5/ideas/v2/ideaexchangepage/blog-id/labviewideas
I hope that this is okay. If you have any further questions or ideas, please don't hesitate to get back in touch. I want to make sure you're completely satisfied with the solution that we reach.
Kind Regards,
So in summary: No, you cannot adjust the resolution (DPI) at which the Standard Report Generation toolkit processes appended images.... Unless anyone knows better? ...i can not get satisfactory results from either of the suggested work arounds.
BR
Blue

Standard report for Open Orders & JIT lines

Hi,
I need a standard report that will list out all open Purchase Orders and All Open JIT lines for a Supplier for Perticular plant.
Is there any standard report that can pull this data.
Regards
Sandeep

Use ME2M / ME2N and ME2L reports with selection parameters WE101 and scope of list EINT

XML Publisher Report in EBS without Standard Oracle Report

Hi folks ,
i have some questions.
Can I create a XML Publisher Report for the EBS without a Standard Oracle Report in EBS.
So that I can build up the files with the Desktop Publisher, create Data Definition / Template with Upload / Create the executable und concurrent and than only start the new program in EBS ?
I have the situation that I can start my program with the template in the background but ít is searching for the report on the file system.
Thanks in advance for the feedback.
regards
Kay

Hi Ravi ,
can i do it only with the xml Publisher , because when i tried it in the past and get all the staff like Template / DD / CP up and running and started the CR i get an error from the system that he is missing a report directly in the file system... so he searched for the report himself on system like a standard 6i Report. But the template and the dd is stored in the db. So my question again, can I use the XML Puplisher without a Standard Report or can i use a dummy file only for checking and after that he use my template / dd.
regards
Kay

Edit font size standard report

Hello community,
I try to edit the font size of a standard report but I can't find any menu within APEX to edit this reports.
I also tried to edit it within the SQL with '< f o n t s i z e=130%">' || ... || '</ f o n t >' but this did not work.
Can anybody help me? Is there a menu which lists all the standard reports and where is the chance to edit this?
Or is there any other chance?
Thank you so much,
Lisa :-)

Hi Lisa,
The font is defined in the style sheet (css file) that is referenced in the Page Template. You can override the style by adding your own style (with the same name as used by the columns in the report - you can check that using Firefox+Firebug or the Developer Tools in Chrome) after the APEX standard CSS. You can also put this CSS in your Report Template or in your Page (if it's only for one specific page).
A good practice is not to include CSS or HTML in your SQL query. Because SQL is logic and HTML/CSS is presentation and these two shouldn't be mixed up.
Roel

How to add new fields to standard reports

hi friends,
im into ABAP and working across all modules..the basic thing is users and functional people are not satisfied with the standard reports..they need some logic change or to add some more fieldsinb the standard reports.For logic change we have to copy the standard to zprogram and can do or create a new program itself..but in many cases they ask for extra fields.how to achive it ..
for example my requirement now is adding vendor name field to the report FAGGL03 ....i found a badi and have make changes to it ...now the vendor name will be coming in sgtxt over writing the text ...but they need text also...now what shall i do???
append structure vendor name field in faglposx table ....???how to find out the final internal table from where the output is coming ????
?when we check the standard rewport codes...there are lot of include statements perform statements etc ...how to find out the final structure or internal table which has the output values..???

hi
it would be better if u giv full name of the report
if ur displaying the data in alv then search for the
word REUSE_ALV_LIST_DISPLAY REUSE_ALV_GRID_DISPLAY from which u can get the final table name
then check the data that is comming into
try using implicit enhancement or any other exit in the declaration and declare a new structure with the field and append it to the field catalog
if ur displaying the data using write statement
then create a zprogram and add a write statement
fi ur unable to find here the final table then after displayign the report start the debugging and double click on any row to find out more easily
shiva

Mismatch in PS reports BW vs R3 Standard reports

Similar Messages

Maybe you are looking for