Mismatching no of records b/w CATSDB table and Data Source 0ca_ts_is_1

Hi Experts,
We are extracting the data from Data base table CATSDB.The No of records in the table(SE11) are 800 with status 30, but in RSA3 (0ca_ts_is_1) there are 500 records only.
What could be the causes?
Could you kindly suggest me anything.
Thanks in advance
Shaliny. M

Hi Shaliny,
In RSA3, increate the values for "Data Records / Calls" and Display Extr. Calls (to say 10000 and 10000) and see if it pulls all the records. Sometimes the numbers in RSA3 are misleading. Otherwise, pull the data upto PSA and check. RSA3 sometimes is not the best way to compare the number of records.
Hope this helps.
Thanks and Regards
Subray Hegde

Similar Messages

Inconsistent data in PSA table and Data source

Dear Experts,
I am using Process chain to update info cube from data source of a z table. In the process chain, the Delete PSA request step is having the PSA table number of the correct data source. The info package and the DTP also have the correct data source.
But after executing the process chain, the PSA table is updated with the wrong data source.
I have checked the Extraction of the data source in RSA3 transaction. The records are matching to the correct data source. But when I check PSA contents through process monitor in process chain log for DTP, I found the PSA content data is inconsistent and getting the data from wrong data source.
If process chain is repeated once again, the PSA is updated with the right data source.
Also when I do the process chain steps manually, it is working well.
Thanks and regards
Murugesan

Hi,
Looks strange but you can do the following check,
Go to your data source and from the PSA table check which infopackage is loading data. You should be able to see that data is getting loaded from same infopackage. If there are multiple infopackages involved means you could get different data.
Regards,
Durgehs.

R/3 tables and data sources

hi guys,
i am trying to find r/3 tables for plant maintainance data sources
and project system data sources
i am trying it out in help.sap.com
i am able to find r/3 tables information for 60% of data sources only
how can i find the exact information of r/3 tables with respect to data sources
i have seen help link for this application components throughly
please suggest me
i will assign points

Hi Selva,
I typically try this:
Goto ROOSOURCE -> Give the datasource name and find out what type of datasource it is. If it is based on view/table then use the table/view. If it is based on function module then you would need to look at the code and find out from which tables the data is extracted.
For fn module:Goto se37 -> Give the fn module name -> Click the "find" button -> give the text as "select". Select the radio button "Main program". It would list all the select statements in the fn module. In teh select statement you can find the name of the table.
Hope this helps.
Bye
Dinesh

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

Loading MS Access Table and Data into Oracle

Hi,
I have few tables in MS Access. I want to create same layout of tables in Oracle and want to populate data from MS Access tables to Oracle tables.
Please let me know if there is a way by which I can create tables and load data automatically (thru some option or script)?
I have Oracle 10g database and its clients.
Thanks in advance,
Rajeev.

You can use Oracle migration workbench
Loading MS Access Table and Data into Oracle
It´s very easy to use and good to import
regards,
Felipe

Creation of a generic extractor and data source for the FAGLFLEXA table

Hi All,
Need to create a generic extractor and data source for the FAGLFLEXA table to support AR reporting. This table contains the necessary profit center information to perform LOB reporting against the AR data.
Please advice on how to do this.
Regards, Vishal

Hi Vishal,
Its seems a simple a work out.
1.Go to RSO2 & choose the relevant option ie. whether you want to create Transactional DS, Master Data DS or Text DS.
2. Name it accordingly & then create.
3. Give description to it & then give table name FAGLFLEXA.
4. Save it & activate. If you need it to be delta enabled then click over Delta & you can choose accordingly.
If you still face some problem then do mail me at [email protected]
Assign points if helpful
Regards,
Himanshu

VIew all tables and data in MaxDB

Is there any software that is able to view all the tables and data in the MaxDB instance?

Hello
Assuming, that you are looking for information about the DB's catalog, please consider the catalog functions of JDBC or ODBC.
Surely there exists a lot of free tools, gathering the catalog via JDBC/ODBC of a database.
Regards Thomas

Export and import of data not table and data ????

hii brothers and sister
plz i have a a quetion about Export and import of data in oracle forms
i have created 02 boutons one for export his trigger like this :
eclare
alrt number;
v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
path varchar2(100):='back_up'
||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
||v_directory
||'\'
||path
||'.dmp';
begin
host(v_exp);
alrt:=show_alert('MSG');
end;
and the bouton import is like this
declare
alrt number ;
v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
begin
host(v_ixp);
alrt:=show_alert('MSG');
ref_list;
end;
i have just one table "phone"
this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

Pl post OS and database versions.
You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
HTH
Srini

Whar are logical table, Physical table Logical data Source

Hi,
Can any one explain me in details what Whar are logical table, Physical table Logical data Source.
Any qucik help will be graetly appreciated

In OBI there are three layers - Physical, Business Model and Mapping (BMM) and Presentation.
As the name specifies the Physical layer mainly contain physical aspect of the application like which connection to use, which schema (also catalog in case of SQL server) to connect and also which table to use. This layer confirms the PK_FK joins for the related tables. This layer mainly depicts how the data has been stored in the database layer.
On top of this layer you will have you BMM layer. The place where all work of a developer starts. You will structure the tables accourding to the business need. The structure has to be a STAR schema. All the entities in this layer are called logical because they do not directly represent any database object rather they provides a logical mapping to the database entities. This becomes clear when you use more that one Logical Table Source (LTS) for your logical tables. One logical column can map to N number of physical columns based on context. You can also create calculative columns in this layer which are totaly logical in nature.
I am not writing anything on Presentation layer as it is not in you question. :)
Hope this will help.
Regards,
Somnath

Comman to take user level backup(tables and data in table for a particular)

Hi ,
I need to create a sql script to take user level back up i.e i need to take back up ,(export the tables and data in those tables in particular user) to my pc..
i am able to do the same from unix command ,but not able to do the samq in sql script
Please advice.

Hi ,
I need to create a sql script to take user level back up i.e i need to export the tables and data in those tables in particular user to my pc..
i am able to do the same from unix command ,but not able to do the samq in sql script
Please advice

How to find unsued Transfer Rules and Data Sources for a Master Table...??

How to find unsued Transfer Rules and Data Sources for a Master Table...?? My requirement is i need to delete those Transfer rules and Data Sources which are not in use

Hi
Go to manage of the Text or attirbute of the master data object, see what are being loaded daily from there and delete the remaining.
Cheer
Ans as expected, Please reward

From where can i find/download it's tables and data? ("Oracle iDS Froms:...

i have Student Guide named => "Oracle iDS Froms: Build Internet Application I" from
Oracle Corporation, part number D32772, May 2001. it uses "The Summit Sporting Goods Schema"
as an example throughout the book.
from where can i find/download it's tables and data?
will be thankful for guidence.
Arif.

from where can i find/download it's tables and data? ("Oracle iDS Froms:... Jan 22, 2004 6:34 PM
Reply
i have Student Guide named => "Oracle iDS Froms: Build Internet Application I" from
Oracle Corporation, part number D32772, May 2001. it uses "The Summit Sporting Goods Schema"
as an example throughout the book.
from where can i find/download it's tables and data?
will be thankful for guidence.
Arif.

Copy all tables and data from remote schema to local schema

Hi,
I am using Oracle 10g Enterprise edition as a database and Windows 7 as the operating system.
My Requirement is to copy all the tables and data from remote machine database to my local machine.
I created a DB link between my location schema and remote machine schema. Database link created successful. Error what i am getting when i am trying to import all the tables from the remote data is as mentioned below
I created a directory gave all the privilege to do read and write on the directory.
Directory name : DUMP
Local Schema name / PASSWORD : PRODUCTION / PRODUCTION
Remote Schema name / Password : portal / m3892!2
When i run this scrip from command prompt
impdp PRODUCTION/PRODUCTION DIRECTORY=DUMP LOGFILE=LOCALPROD_MERUPROD.log network_link=MERU_DEV_LOCAL_PROD schemas=portal remap_schema=portal:PRODUCTION TABLE_EXISTS_ACTION=REPLACE
It is giving me following error please suggest me what is the mistake i couldn't trace
ORA-31631: privileges are required
ORA-39149: cannot link privileged user to non-privileged user
Thanks
Sudhir

Thanks I gave the grant permission for the "portal" remote user. I didn't not get the error. Issue am facing now is I need to copy the entire schema of production to my local system production.
I am currently using the below script to copy. it not working. what might be the reason there is no error message coming but still i don't see any tables in my local system after executing this script
impdp PRODUCTION/PRODUCTION DIRECTORY=DUMP LOGFILE=LOCALPROD_MERUPROD.log network_link=MERU_DEV_LOCAL_PROD schemas=portal remap_schema=portal:PRODUCTION TABLE_EXISTS_ACTION=REPLACE
Or suggest me some other script to copy all the tables and procedure function from remote database to my local database using impdp script
Thanks
Sudhir

Cannot INSERT records into Partitioned Spatial Table and Index

I am trying to tune our Spatial Storage by creating partitioning our spatial_entity table and index. I used the World Geographic Reference System (GEOREF) creating a partition for each 15 x 15 degree grid square assigning a partition key of decimal longitude, decimal_latitude. The build went OK, however when trying to insert a data record I receive an ORA-14400: Inserted partition key does not map to any partition.
I validated the CREATE(s), and all appears correct, but obviously something is not correct, which is prompting for expert help in this forum.
I would be very grateful for your help.
Below are the code snippets for the table and index, and an insert statement.
CREATE TABLE spatial_entity
     geoloc_type VARCHAR2 (60 BYTE) NOT NULL
,entity_id NUMBER NOT NULL
,metadata_xml_uuid VARCHAR2 (40 BYTE) NOT NULL
,geoloc MDSYS.sdo_geometry NOT NULL
,nee_method CHAR (1 BYTE) NOT NULL
,nee_status CHAR (1 BYTE) NOT NULL
,decimal_latitude NUMBER (15, 6) NOT NULL
,decimal_longitude NUMBER (15, 6) NOT NULL
PARTITION BY RANGE (decimal_longitude, decimal_latitude)
     PARTITION p_lt_0_90s
          VALUES LESS THAN (1, -90)
     ,PARTITION p_lt_0_75s
          VALUES LESS THAN (1, -75)
     ,PARTITION p_lt_0_60s
          VALUES LESS THAN (1, -60)
     ,PARTITION p_lt_0_45s
          VALUES LESS THAN (1, -45)
     ,PARTITION p_lt_0_30s
          VALUES LESS THAN (1, -30)
     ,PARTITION p_lt_0_15s
          VALUES LESS THAN (1, -15)
     ,PARTITION p_lt_0_0
          VALUES LESS THAN (1, 0)
     ,PARTITION p_lt_0_15n
          VALUES LESS THAN (1, 15)
     ,PARTITION p_lt_0_30n
          VALUES LESS THAN (1, 30)
     ,PARTITION p_lt_0_45n
          VALUES LESS THAN (1, 45)
     ,PARTITION p_lt_0_60n
          VALUES LESS THAN (1, 60)
     ,PARTITION p_lt_0_75n
          VALUES LESS THAN (1, 75)
     ,PARTITION p_lt_0_90n
          VALUES LESS THAN (1, maxvalue)
CREATE INDEX geo_spatial_ind ON spatial_entity (geoloc)
INDEXTYPE IS mdsys.spatial_index
PARAMETERS ('layer_gtype=MULTIPOINT TABLESPACE=GEO_SPATIAL_IND') LOCAL
(PARTITION p_lt_0_90s,
PARTITION p_lt_0_75s,
PARTITION p_lt_0_60s,
PARTITION p_lt_0_45s,
PARTITION p_lt_0_30s,
PARTITION p_lt_0_15s,
PARTITION p_lt_0_0,
PARTITION p_lt_0_15n,
PARTITION p_lt_0_30n,
PARTITION p_lt_0_45n,
PARTITION p_lt_0_60n,
PARTITION p_lt_0_75n,
PARTITION p_lt_0_90n,
INSERT INTO spatial_entity
     geoloc_type
     ,entity_id
     ,metadata_xml_uuid
     ,geoloc
     ,nee_method
     ,nee_status
     ,decimal_latitude
     ,decimal_longitude
VALUES
               'BATCH'
               ,0
               ,'6EC25B76-8482-4F95-E0440003BAD57EDF'
               ,"MDSYS"."SDO_GEOMETRY"
                    2001
                    ,8307
                    ,"MDSYS"."SDO_POINT_TYPE" (32.915286, 44.337902, NULL)
                    ,NULL
                    ,NULL
               ,'M'
               ,'U'
               ,32.915286
               ,44.337902
Thank you for you help.
Dave

Thank you for your quick reply. I did not post the entire CREATE script as it is quite long. The portion of the script that is applicable to the INSERT is:
,PARTITION p_lt_45e_90s
          VALUES LESS THAN (23, -90)
     ,PARTITION p_lt_45e_75s
          VALUES LESS THAN (23, -75)
     ,PARTITION p_lt_45e_60s
          VALUES LESS THAN (23, -60)
     ,PARTITION p_lt_45e_45s
          VALUES LESS THAN (23, -45)
     ,PARTITION p_lt_45e_30s
          VALUES LESS THAN (23, -30)
     ,PARTITION p_lt_45e_15s
          VALUES LESS THAN (23, -15)
     ,PARTITION p_lt_45e_0
          VALUES LESS THAN (23, 0)
     ,PARTITION p_lt_45e_15n
          VALUES LESS THAN (23, 15)
     ,PARTITION p_lt_45e_30n
          VALUES LESS THAN (23, 30)
     ,PARTITION p_lt_45e_45n
          VALUES LESS THAN (23, 45)
     ,PARTITION p_lt_45e_60n
          VALUES LESS THAN (23, 60)
     ,PARTITION p_lt_45e_75n
          VALUES LESS THAN (23, 75)
     ,PARTITION p_lt_45e_90n
          VALUES LESS THAN (23, maxvalue)
Or, I do not fully understand. Are you indicating that I must explcitly state the longitude in each clause,
e.g ,PARTITION p_lt_45e_45n
          VALUES LESS THAN (45, 45)
,PARTITION p_lt_45w_45n
          VALUES LESS THAN (-45, 45)
If so, that answers the question of why it cannot find a partition, however an Oracle White Paper "Oracle Spatial Partitioning Best Practices" Sept 2004, discusses multi column partitioning such as represented by this problem, and gives an INSERT statement example of :
CREATE TABLE multi_partn_table (in_date DATE,
geom SDO_GEOMETRY, x_value NUMBER, y_value NUMBER)
PARTITION BY RANGE (X_VALUE,Y_VALUE)
PARTITION P_LT_90W_45S VALUES LESS THAN (1,-45),
PARTITION P_LT_90W_0 VALUES LESS THAN (1,0),
PARTITION P_LT_90W_45N VALUES LESS THAN (1,45),
PARTITION P_LT_90W_90N VALUES LESS THAN (1,MAXVALUE
and as I am writing this I am seeing that I failed to include the longitude and latitude in the SDO_GEOMETRY clause, so it does appear tht I need to explicitly state the longitude valuues.
What is your judgement sir?
Dave

To split the records of the internal table and send in Packets to XI

Hi All,
I am executing the program in SAP. Program will send the material numbers to Oracle through XI and in turn we will get the corresponding data back to SAP. and this all data is written into the file.
if records are more than 700 then XI will not able to get the data fully.
So, solution for this is to send the data in packets.
I want to write the logic like whenever the recods are more than 700, the first 700 records will got to XI and rest of the records will go to XI after that. we are sending the material numbers to xi through proxy.
Problem is : how to write the logic for this.
suppose we have executed the report for 1000 records, then it should generate 2 excel file in which first file shud contain 700 records, AND 2nd will contain rest of the 300 records.
Regards,
Mamta

Hi Mamta,
Please try this code. This is to split records as 255 length and u can change it as ur requirement by simply changing l_offset value as 700.
DATA: l_length TYPE i,
      l_lines TYPE i,
      l_pos TYPE i VALUE 0,
      l_offset TYPE i VALUE 255,
      l_part TYPE i,
      l_lastpart TYPE i.
CLEAR i_etabfinal.
REFRESH i_etabfinal.
*Split etab line as multiple 255 char length of lines
LOOP AT i_etab INTO x_etab.
l_length = STRLEN( x_etab-result ).
l_lines = l_length DIV l_offset.
l_lines = l_lines + 1.
l_part = l_offset.
DO l_lines TIMES.
*To avoid spaces
IF l_part LT l_length.
x_etabfinal-line = x_etab-result+l_pos(l_offset).
APPEND x_etabfinal TO i_etabfinal.
l_pos = l_pos + l_offset.
l_part = l_pos + l_part.
ELSE.
l_lastpart = l_length - l_pos.
x_etabfinal-line = x_etab-result+l_pos(l_lastpart).
APPEND x_etabfinal TO i_etabfinal.
ENDIF.
endloop.
Regards,
Subbu

Mismatching no of records b/w CATSDB table and Data Source 0ca_ts_is_1

Similar Messages

Maybe you are looking for