Missing 2LIS_03_BX

Hi All,
I was trying to activate the standard cube, While searching for the DataSource 2LIS_03_BX, i could not find it in the list
The list contains only the following,
0CO_PC_ACT_02
0CO_PC_ACT_03
0CO_PC_ACT_04
0CO_PC_ACT_05
0CO_PC_ACT_06
0CO_PC_ACT_07
0MM_PUR_VE_01
0MM_PUR_VE_02
2LIS_02_CGR
2LIS_02_HDR
2LIS_02_ITM
2LIS_02_S011
2LIS_02_S012
2LIS_02_S013
2LIS_02_S015
2LIS_02_S174
2LIS_02_SCL
2LIS_02_SCN
2LIS_02_SGR
2LIS_03_BF
2LIS_03_S091
2LIS_03_S194
2LIS_03_S195
2LIS_03_S196
2LIS_03_S197
2LIS_03_S198
2LIS_03_UM
Your help in this will be much appreciated

Hi,
There is no problem with your PI. The data source has to be displayed 0BW_DATASOURCES>SAP-R/3>MM
I am not able to figure out the exact problem .I hope, it is better to create OSS .And also wait for our experts suggestions here.
With rgds,
Anil Kumar Sharma .P

Similar Messages

Transformations 2LIS_03_BX/BF/UM missing in BI Content

Hi ,
I want to activate BI content for Cube 0IC_C03 but transforamtions and also update rules are missing in BI content.
Can some one send me a copy of the mappings of the key figures , including the ABAP routines
thx

Hi,
Please update your patch to get the latest BI Content.
-Vikram

Mapping(type routine) missing in transformation 2lis_03_bf - BCT 703, 704

Hi Friends,
i am on 703 BI content, than when i activated the 0ic_c03 infocube I observed that in transformation 2lis_03_bf mapping is missing, target field should is not mapped with source field, in earlier version of bi content target fields is gettinc caluclated by some routine and secondly start routine of 2lis_03_bf have syntax error, same with 2lis_03_bx and um transformation.
so we upgraded to BI conetent 704 with patch 0001 than i reactivated the 0ic_c03 cube but though problem is same.
so, we are now planning to upgrade support patch 0003 for BI content 704, will support patch 0003 for BI content 704 solve the problem or anyother thing required to do with current status of BI conetent 704 with patch 0001 to solve this issue?
Regards,
dushyant,

Hi Colin Moloney ,
we applied the 0003 support pack/patch for the BI content 704 from patch 0001 of BI content 704,
now start routine error of 2lis_03_bf is gone, transformation is comin as active verson once we do reactivation of object from BI content,
But still missing the mapping rules in transformation.
note 1179880 is saying that Import Support Package 3 into your system. is that mean patch 0003 for BI content 704?
note content - "Solution
Implement Note 1171293 in your system. The following procedure depends on the release you are using.
BI_CONT 7.04:
A Support Package that contains all transformations is available for Release BI_CONT 7.04. Import Support Package 3 into your system.
If you install Release 7.04 by upgrading from Release 7.03, only the changed objects (delta) are imported into the system. As a result, transformations may be deleted in the system, and you may only notice this when you activate the new BI Content from Release 7.04. The missing transformations are delivered completely in this Support Package"
now what to do?
regards,
dushyant.

Fields missing in Update rules

I am creating snap shot DSO for inventory management and after that i created the update rules for it linking it to the info source 2LIS_03_BX. When i do this i am missing the info objects that i created to include in the DSO. How do i solve this issue as those info objects are very important and i have to create the routines for it.
I have got the units for those fields and they are mapped but the info objects itself are missing.
Thanks for any help in advance
Naveen

HI Naveen,
Yes, you can include the missing infoobject in DSO. for that you need to follow bellow steps:
a). Delete the data from DSO.
b). you have to include the infoobject in DSO.
Double click on DSO>select chage mode->select keyfield /data field node--->right click select Infoobject Direct Input.
c). Activate the DSO
Brief Description about 2LIS_03_BX :
The 2LIS_03_BX is used to extract an opening stock balance on a detailed level (material, plant, storage location and so on). At this moment, the opening stock is the operative stock in the source system. "At this moment" is the point in time at which the statistical setup ran for infosource 2LIS_03_BX.Loading the opening stock balance InfoSource 2LIS_03_BX into data target.In the InfoPackage, choose the upload mode u201CCreate opening balanceu201D.
Regards,
Suman.

Loading to inventory cube - LBWQ ( entry MCEX03 missing )

Dear Guru's,
My main idea is to store only last 1 years of data in inventory cube .
I do not want to load the movements & revaluation data from ECC but reconstruct.
I have successfully initialized only 2LIS_03_BX and filled the set up table and further loaded in to BW.
For movements data i wanted to recontruct , so i reconstructed .
BW --> opening stock is correct.when compared with MB5B
Movements ( some data missing ) -- If i check for the historical stock , results does not tally.
I further checked and found some transactions missing in the cube ( when compared to MB51 movements list )
I tried to bring in these into BW using full load of 2LIS_03_BF.
it fetched 0 records.
I deleted the initialization request from info package in BW for 2lis_03_bf earlier
RSA3 --> also 0 records.
LBWE --> Job control scheduled to run every 1 hour.
RSA7 --> found job scheduled.
LBWQ --> no entry for MCEX03
I have run init with out data transfer and then tried to load full . still 0 records .
Also at rsa3 0 records.
Please help to advise how i can fetch these missing movements / records in to BW
Thanks & regards,
Sudhir.

Hello Janardhan,
When ever a full update is complete, the next records i.e. delta records moves into the Extractor Queue (LBWQ ) and after this moves through Scheduled process in delta Queue ( RSA7) .
The role of Setup tables is limited when you need the full extraction from the Application tables . Setup tables are restructuring tables .. basically are pooled tables which are introduced in the LO Extraction to ease up the extraction . Here System doesn't need to look for the Application table for data , this saves down time and consistency of records.
From Reconstruction it is relevant in 3x. Could you please elaborate what you tried to do..!
You can refer to the below links
Setup tables
LO Cockpit data extraction
Hope this helps...!
Regards
YN

Missing content for inventory management (cube 0IC_C03)

Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas

Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas

Missing: RSDS 2LIS_03_BF from Content

When activating from BI_CONT the cube 0IC_C03 some content is missing. It came with the Transformations and DataSources of:
RSDS 2LIS_03_BX -> TRCS 2LIS_03_BX_TR
But is missing the ones:
RSDS 2LIS_03_BF -> TRCS 2LIS_03_BF_TR
RSDS 2LIS_03_UM -> TRCS 2LIS_03_UM_TR
Therefore the loading cannot be completed.
Has anyone enountered such issue?
Thank you,
Alex
BTW: We are on: SAPK-70405INBICONT
Edited by: Alex M on Jun 28, 2010 6:25 PM

Hi,
1.Install DataSources in RSA5 in ECC.
2.Check and configure it in RSA6 and LBWE in ECC.
3. Replicate it in BW.
4. Install 0IC_C03 and InfoSources and TransferRules related to 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM and then create InfoPackages in BW.
5. Fill Setup tables in ECC and then Load Data.
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy

Compression of 2lis_03_BX data gives CX_SQL_EXCEPTION error

Hi,
I'm trying to compress data(from 2lis_03_bx) in inventory cube and am getting the foll. error..
"Insufficient input parameters supplied (Exception CX_SQL_EXCEPTION occurred (program: parameter is missing)
Message no. RS_EXCEPTION102
I would really appreciate if anyone has any thoughts on this.
Thanks,
Ritu

Hello Girija,
Please check OSS note 973969.
Regards,
Praveen

Partner application configuration is missing error on SSO login page

We have APEX 3.1.2 setup as a partner application and an application within APEX setup to use SSO for authentication. Following a link to the APEX application redirects to the Single Sign-On page, as it should, but it also shows "Error: The partner application configuration is missing or expired." I type in my password and username, click the Login button, and (if I entered my username and password correctly, of course!) then the APEX application is shown. So, I cannot figure out why we're getting the no_papp_err error and I have not found any solutions to that issue on Metalink or anywhere else on the Internet. Any ideas? I'm concerned that we have a misconfiguration somewhere that is causing this error and will affect any other partner application we setup in the future.
We're on Oracle Portal 10.1.4, SSO 10.1.2, and SSL is setup on both infra and mid tiers.

Did you try checking the partner application entries on the SSO-login server page?
please login as orcladmin or some other user with membership in, i beleive, iasadmins group. verify that for this partner application, what you see here corresponds to the application URL. it looks like your login page call may have issues. so check for login url too.
also check the ORASSO.WWSSO_LS_CONFIGURATION_INFO$ for entries corresponding to Apex application.

HT203167 A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV.

A movie I purchased in the iTunes store is missing. It isn't hidden and doesn't show up in search. I've followed support steps. Where is it and how do I find it? I believe I originally purchased the film on my 1st Gen AppleTV...other movies show up. Help.

It was Love Actually. It's been in my library a few years but is now missing. It's odd...it isn't even in the iTunes Store anymore. I think there is a rights issue because a message appeared in the store saying it wasn't available at this time in the U. S. store. Still, if I bought it years ago it should be in my library or I should get a refund....

Songs that I have purchased are missing in iTunes (file not found/exclmation point), and do not show up in the iTunes Store for download.

I have a laptop that has (or had) pretty much all of my music, both burned from CDs and downloaded from iTunes. My 17 year old son on occasion syncs his iPhone and iPad with this laptop. As of the last sync (as best I can determine), many songs that I purchased in the past few years are now missing, in that they have an exclamation point to the left of the song title, and when I try to play the song, I get an error message that says "The song could not be used because the original file could not be found" or something to that effect. As it turns out, the file seems to be erased. This has happened multiple times, and I could be wrong, but I believe that there are some songs that had the exclmation point last time he synced that now don't, and vice-versa. There is not an obvious correlation or grouping as to why these songs are missing (e.g,. they were not all purchased on the same date, not all songs from one artist are missing, etc.).
Since most of these songs have been purchased through iTunes through my account, my reaction was to go to the iTunes store, log in with my account, and re-download them. Problem is, all of these songs instead ask me to purchase the song, instead of displaying a "cloud" logo. Therefore, it appears that I have to re-purchase these songs, which does not sound correct.
Questions: Does anyone know, most importantly (to get an immediate fix):
1. How can I re-download these songs and why doesn't iTunes Store recognize that I have already purchased them?
and perhaps as important (more of a long-term question):
2. Why does this happen and how can I prevent this from happening again (since it has happened multiple times)?
Thanks.

1. iTunes won't offer cloud downloads for songs that it "thinks" are in your library, even if it "knows" the files are missing. If you've exhaustively searched for the missing files and there is no prospect of repair by restoring to them to their original locations, or connecting to new ones, then delete that tracks that display both the missing exclamation mark and are of media kind Purchased/Protected AAC audio file. Don't hide from iTunes in the cloud when asked, close iTunes, then reopen. You can download from the cloud links or iTunes Store > Quicklinks > Purchased > Music > Not on this computer > All songs > Download all.
2. Why? Not sure, perhaps 3rd party tools or accidental key presses combined with previously hidden warning messages when trying to organize the library. There is a hint that using the feature to downsample media as it is synced to a device may also be involved, though I've not replicated it. Whatever the reason a backup would protect your media.
tt2

Regarding Field Missing in Dso Transformation

Hi
Folks
I am facing the issue like
In Datasouce to DSO transformation i can see the 55 objects in DSO table, and in DSO to Cube Transformation i can see 54 fields in DSO table, one field is missing , the object 0TXTSH(short discription) is mapped to field 0TXZ01in DS to DSO transformation.
so How can i get the field in DSO to Cube transformation.??
any settings have to be change???
waiting for yours Valuable answers
Regards
Anand

Hi,
Please identify the object and check it whether it is an attribute or a characteristic, if it is attribute only disable that option then check it.
Regards,
Srinivas

Options - Text Editor - C/C++ missing intellisense entry. Intellisense not working

Options -> Text Editor -> C/C++ missing intellisense entry. Intellisense not working. Solutions to turn options for the editor off and on are not working. The intellisense entry is present for other languages,
such as C#, but not C/C++.
By not working, I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.

Hi JerroldBrody,
Thank you for posting in MSDN forum.
>>I mean the intellisense right click menu items are grayed out, and intellisense files are not produced.
Based on your issue, could you please share me a screen shot about the intellisense right click menu items are grayed out?
Generally, I know that it is default that we can enable the intellisense for C/C++ by going to the TOOLS->Options -> Text Editor -> C/C++ ->Advanced-> IntelliSense like the following screen shot.
So please try to check if you set Disable Intellisense property as False in the VS IDE.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Loops "missing" but still in library

Upon update, many loops went 'Missing" although they are in the loop library still.
Have tried several attempts to re-index loops to no avail.
For instance, "Live Edgy Drums 07" remains, but "Live Edgy Drums 29.2" does not and has no sound.
in sound effects, "Airplane Takeoff" is in the loop library and is functioning, but "is not found" in my composition.

how do i get them back into my playlist?
On the left side ofTunes, drag from Library -> Music to the playlist you want it in.
why does it keep doing this?
Are you deleting the playlists the song(s) are in?

New Black BT Vision box - what is missing, a discu...

Maybe it's just me but here is a list of things which are currently missing or wrong with the new BT Vision box (black edition with new interface and OS). Thought it might be useful to keep a list of these going which people can add to.
would also appreciate it if anyone can help with any of these issues in case i've missed something
Red button doesn't work - believe this is 'coming soon'. you can still access the channels by going to 301 or 302
Teletext doesn't work - the button pops up a message saying it's not available, coming soon?
There is no way to set recordings to over run? - this used to be very handy on old box, particularly with live shows. is this being brought back?
No signal strength tester - you used to be able to check digital signal reception strength and quality from the settings menu, not any more
Pressing 'play' when viewing a recording doesn't flash up the progress bar - any other good way to do this, used to be handy. Fix: pressing "select" does the trick
no HD Freeview - the box isn't capable, wondering whether they might upgrade us to YouView later on for this?
No options to set resolution - used to be able to define 720p or 1080i for instance, not any more
Sky Sports small white box - a small logo in the bottom right area, not sure what this is or why it's now there?
Subtitles on iPlayer missing
Some reported picture quality issues - both on SCART and HDMI
On the plus side:
Bigger capacity on the hard disc
Faster inteface and movement between sections
Nice new design and sharp interface resolution
Channel logos / graphics now in the information bar menu
When in the TV Guide there's still a small box showing you what you are watching on the current channel
Music playlist
Bookmarks
Reinstatement of the 30s jump and better fast-forward / rewind (30s jump doesn't work on Sky Sports)
Ability to jump to specific point in recordings (you need to start it first, then stop and go back into it to have option)
Ability to reenter a recording at a time offset
Icon to show which recordings have been watched
HD iPlayer
Recently viewed in iPlayer
Ability to resume a programme on iPlayer
Ability to resume on demand
Disk usage on Recordings page
Auto switching format for HDMI and SCARTOne-press toggling of Subtitles and Audio
Previous channel facility
'Play all' feature for On Demand series
anything else people want to add?

Subtitles on iPlayer
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.

Missing 2LIS_03_BX

Similar Messages

Maybe you are looking for