Missing 934w move type in delivey

Hi
We are facing issue where there is no 934 movement created by system for delivery # xyz
Mat DOc #  ABCD ( 932) created in plant # 8635 and there should be 934W in plant # 8670.
X part was not fully move to service plant 8670 miss 934 move type
Could u pls le me know the cause of this issue and what and where we need to update ?
Regards
Vikas

Hi,
Movment type has to be assigned at Schedule line config. Check you settings in TA - VOV6
Edited by: Ajeet Parmar on Jul 16, 2009 11:40 AM

Similar Messages

  • Data loading problem with Movement types

    Hi Friends,
            I extarcted data using the data source General Ledger : Line itemdata (0fi_gl_4) to BW side.
        Problem is Movement Types for some documents missing.
    But i checked in rsa3 that time showing correctly.
    i restricted the data in bw side infopackage level only particular document that time data loading perfecly.
    this data source having 53,460 records.among all the records 400 records doc type 'we' movement types are missing.
    please give me solution for this how to loading the data with movement types.
    i checked particular document of 50000313 in RSA3 it is showing movement types. then i loaded data in bw side that time that movement types are not comming to be side. then i gave the particular doc 50000313 in infopackage level loading the data that time movement types are loading correctly. this extaractor having 55000 records.
    this is very urgent problem.Please give me reply urgenty. i am waiting for your's replys.
    Thanks & Regards,
    Guna.
    Edited by: gunasekhar raya on May 8, 2008 9:40 AM

    Hi,
    we enhanced Mvement type field(MSEG-BWART) General ledger (0FI_GL_4) extractor.
    this field populated with data all the ACC. Doc . number.
    Only 50000295 to 50000615  in this range we are not getting the movement types values.
    we didn't write any routines in transfer and update rules level.
    just we mapped to BWART field 0MOVETYPE info object.
    we restrict the particular doc no 50000313 infopackage level that time loading the the data into cube with movement types.
    but we remove the restriction infopackage level then loading the data that time we missing the movement types data of particular doc no 50000295 to 50000615.
    Please give mesolution for this. i need to solve this very urgently.
    i am witing for your reply.
    Thanks,
    Guna.

  • Movement Types in the Delivey Document

    Hi all,
    I have some problems regarding the Movemnet types used in Outbound Delivery Documnet.
    1. Can use the Transfer posting function in the delivery documnet. Becasue i want to transfer the Goods at the Post Goods Issue level to another Storage location.
    How can i do this.
    2. Can i have list of Movemnt types which i can do in the delivey Document Level.
    Thanks
    Uwanthi

    Hi
    Can use the Transfer posting function in the delivery document
    No not possible
    First of all Transfer posting is an MM process and outbound delivery is an SD process
    Transfer posting means shifting from one head to another
    That is Transfer the postings
    Under one plant say plant no  1000 stock is shifted from one storage location A to another storage location B  is an example of this
    In SD outbound delivery we normally have the PGI that is goods issue and logically that is entirely different from Transfer posting
    i want to transfer the Goods at the Post Goods Issue level to another Storage location.
    I am not able to understand the meaning of this
    Can you elaborate little more  on what you want to do so that i can help you out
    Can i have list of Movement types which i can do in the delivey Document Level.
    Go to VOV6 and select any schedule line category and go to its details
    Say CP and its details and in the Movement type field press F4
    The list of options available are normally used in SD outbound delivery
    That is the list of Movement types  used in  SD outbound delivery
    It starts with 601 (I think so I dont have access to SAP right now )
    Regards
    Raja

  • Movement type for production supply missing in warehouse

    Gurus,
    I am getting this error when i use TC-LP11
    movement type for production supply missing in warehouse
    What should be done?

    All I can suggest is checking the master data:
    Must have at least one Prod. Supply Area and one control cycle set up.
    PSAs are part of the WM-PP interface and are created in WM and are used to group together Work Centres (which are Production master data).
    Created under application menu:
    Logistics/LE/Master data/Warehouse/Production Supply   (Tx LPK1/2/3 see also LS41) and assigned to Work Centres under application menu:
    Logistics/Production/Master data/Work centres/Work centre/Change (Basic data view).
    (To find out the PSA aka Supply Area from Process Order Display Tx select:  Goto \ List \ WM Picklist  and scroll to right)
    A Control Cycle defines for a given material, Plant and PSA:
    which WHS to get the material from
    which interim storage type to take it to
    which bin to place it in (can be dynamic for pick parts)
    Logistics/LE/WM
    Master data/Control cycle record/Create
    Regards,
    Nick

  • Missing movement type data in 0IC_C03 cube

    Hi Gurus ,
    i  have deltas running for 0ic_c03 cube in B1 7.0 i have used transformations for loading cube .
    In a report of this cube for plant material stock,  i can c the quantities matching with MB51  report of R/3 where as the values are not matching for sum material ( negative stock values with 0 qtys )
    i found that a movement type 121 data is missing in BW
    i have read thread on the forum suggesting  to work on OMJJ transaction and make 121 movement type as statistics relevant.
    But i want to know how this action will effect on R/3 update controlling ?
    any inputs will b a grt help
    Edited by: Rajesh Dalwadi on Jan 13, 2009 12:09 PM

    Hi,
    We faced lot of problems with missing movement type, fo that we taken correct confirmation from MM team and then added it in Update Rules and deleted the data in Cube and then Re-Initialized the Cube.
    To do this, you need ECC Down Time. I'm talking about BW 3.5. I think in BI7, it may be easy, (without taking down time, pls check).
    Thanks
    Reddy

  • Error:movement type for follow-on document missing

    Hello,
    Can anyone help me that i got the error message while creating the shopping cart from INTERNAL GOODS/SERVIES after adding the product id in the second step.
    Error :"movement type for follow-on document missing"

    i define BSA in ppoma_bbp as
    BSA: oneclnterp\nb
    and i define this number range Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Number Ranges ® SRM Server Number Ranges ® Define Number Ranges for Shopping Carts and Follow-on Documents
    NO
    From Number
    To Number
    Current Number
    Ext
    Description
    (not in the table)
    01
    0010000000
    0019999999
    Shopping cart
    LO
    0020000000
    0029999999
    Faulty local PO
    PO
    4100000000
    4199999999
    Backend PO
    RQ
    0090000000
    0099999999
    Backend Purchase requisition
    RS
    9600000000
    9999999999
    Backend Reservation
    SE
    0200000000
    0209999999
    Backend Service PO

  • Miss value FI Posting on Sales Order Transfer Posting movement Type 413 E

    Dear Expertise
                   I've a problem about sales order transfer posting. My both of Sales order (Source & Destination) are make to order and open with configurable material(KMAT). Both of sales order contain only one item on the same material no.
    Assume scenario material vastr
    Assume that material vastr is configurable material wait for sales order to fill characteristic and it was maintained standard price value = 1100
                    Sales order A  has plan cost  on material  VASTR  1000
                    Sales order B has plan cost material VASTR 980
    When we make a sales order transfer posting(Transfer from Sales Order A-> B) by transaction MIGO_TR by use movement type 413 E. It can post a transfer complete. But my problem is when I trace to FI-Document
                    It was post like this
                    Dr. Standard price                         1100
                    Cr. price for Sales order A(src.)  1000
                    Cr. Cost Variance                          +100
    I don't want it to offset with standarad price value. I want it to do like this
                    Dr. price for Sales order B(Des.)   980
                    Cr. price for Sales order A(src.)  1000
                    Dr. Cost Variance                           +20
    How can I configure it?   I trial to clear standard price by MR21, System can do it . But I don't want to clear it because it impact to other. I want to know. How can I configure system to take both of plan cost of sales order to offset each other please.
    Edited by: Gareth John on Aug 16, 2010 2:23 PM
    Edited by: Gareth John on Aug 16, 2010 2:42 PM
    Edited by: Gareth John on Aug 16, 2010 2:42 PM

    Hi,
    411- E- sales order to own stock
    412-E- Reversal of 411 E
    & 413-E-Sales order to sales order.
    Regards,
    Piyush

  • Movement Type Data is missing

    Hi experts,
    Can some one tell me why i am not getting Movement Type data in the inventory cube 0IC_C03 after loading from 2LIS_03_BX,2LIS_03_BF,2LIS_03_UM infoSources ??
    The thing i don't understand is i can see data for Movement Type in the PSA but not in the cube ?
    Thanks a lot
    B

    Hi,
    I  never see the the characterstic for holding the Movement Type information. I mean to say, there is no characterstic(for example 0MOVETYPE) in Info cube 0IC_C03. Thats why your not able to see the informatin regarding  Movement Type .
    Try this:
    Enhancing(including 0MOVETYPE)the cube.Enhance the DS 2LIS_03_BF only.  It does not make sense to enhance the DS 2LIS_03_BX to have the stock initialization with respect to movement type.
    With rgds,
    Anil Kumar Sharma .P

  • Problem in movement type in return delivey

    Hi,
    For return order , I configure the system to use Schedule line category "DN" movement type "651" , but after Post goods issue, system did not reduce the inventory of related Storage Location and did not create account document for this delivery.
    So, It is correct to use this movement type or not? And which movement type is suitable for this?
    Thanks.
    Lida.

    Hi
    As you are doing Return Order , after doing Post Goods Receipt(PGR) check wheather stock is getting updated or not. Also check wheather accounting document configuration has been maintained for the PGR
    Check the FI setting through T.Code OBYC , Offsetting Entry -  GBB (COGS) &  Inventory Setting -  BSX ( Inventory Posting)
    Entries COGS  - Positive ;  Inventory Accounting - Negative
    Regards
    Srinath

  • Replace 601 movement with 301 movement type in outbound Delivery

    Hello All,
    We are using SAP - 4.6 C system.
    We have a requirement to create a customer outbound delivery for a corresponding customer Scheduling Agreement but postings should be similar to 301 movement type against 601 movement
    When we use 601 movement type - Material Document and corresponding Accounting Documents are created.
    We do not want Material Document and corresponding Accounting Documents and at the same time should not use TSA / STO functionality
    We want to use only Sales Outbound delivey fucntionality only with 301 postings.
    So we tried to use 301 movement type to post an outbound Delivery and below is the error. Please advise a solution to fix this error. or an alternative approach to create an out bound delivery which should not post to an accounting document.
    Error -
    Update control of movement type incorrect (entry 301 X X _ L _ V)
    Message no. M7 226
    Diagnosis
    The system could not find entry 301 X X _ L _ V in any of the movement type control tables.
    Procedure
    Cancel current processing.
    Contact your system administrator.
    Action to be taken by the system administrator
    Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
    If the entry is missing, proceed as follows:
    u2022 For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
    u2022 For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
    Regards,
    Siva

    Hello all, Jurgen,
    Thanks for your responses.
    Today, we use 601 movement type for Outbound delivery which creates Material Document and Accounting Documents.
    Instead of this, we would like to replace 601 with 301 movement as this has simple plant to plant transfer postings in one of our specific scenario.
    We are getting below error when we do Post goods Issue on Outoubnd delivery: we just replaced SD: Schedule line category movement to 301.
    Update control of movement type incorrect (entry 301 X X _ L _ V)
    Message no. M7 226
    Diagnosis
    The system could not find entry 301 X X _ L _ V in any of the movement type control tables
    Is this the correct approach? Even if we try to create new custom movement ref to 301 to fulfill  301 X X _ L _ V.
    Will this work? I am sure in addition to this we need some user exit development.
    Presently, this is SD Outbound delivery cycle and will continue with same approach.
    we also have our regular scenarios which work with 601. This is one of our exception business cases where we need affects similar to 301.
    For above case we can not use STO/TSA with some master data changes as we have already have same plants set-up for regular STO/TSA processes.
    The above requirement is special case in one of the business cases.
    Thanks
    Siva

  • Amount on Goods receipt for return orders is wrong with movement type 653

    Hi All, I am sorry if it is a simple question because i am an abap'er.
    My requirement is to create return sales order (with ref.to Billing document) and deliver and PGI for the return orders. This should go to sales order stock. Accounting document should be generated for material document and the amount should be picked up from condition type (if man.cond. type exist) else from material master.
    1) Created a sales order (Bought in item cat) - Create PO (Non stock) - Receive goods (MIGO) - Create Delivery (VL01N) -   PGI (Movement type 601 and special stock indic. 'E') - Create billing document (F2 type from VF01)
    So far it is good. The account document is created (PGI - cost of goods) with correct amount as desired
    The next scenario is if the material is returned? This is where we are having issues
    Created sales order with ref.to billing doc. (S.O: RE. Item.Cat. Return Bought in (YRBI)... this is pretty much same as bought in except few things which are YRBI  - Delivered - PGI (Goods returns. unrestricted) Movement type 653 - Problem comes here.
    a) If i put special stock indic 'E' in 'Return bought in item.cat - There is no accounting document generated for 653 movement type.
    b) if i maintain space instead of 'E' in return bought in item.cat - there is an accounting document but the manual cost is not copied to accounting document and it is picking up from material master which we dont want and The stock is not showing up in sales order.
    I did my research (forum, OSS, google, and in help.sap.com) before posting here but no help.
    I have checked account assignment categories for 'A' - (some post explained this) I tried changing values but no help.
    I even tried changing the schedule line category to DN but no help.
    I dont know what i forgot to change or check but i have tried everything what i know and from help from different sources ... still couldnt get it.
    Original requirement is to make the return stock as sales order stock and this can also be returned to vendor. If there is a manual cost in return sales order, the PGI accounting document should be created with this condition value else from material master.
    My pricing settings are good.
    It would be really helpful if any one guide me to configure the process or atleast if anyone tells me what am i missing... .

    Have a look at any of the following notes:-
    1)  Note 171989 - Sales-order-related productn: Custmr exit COPCP002
    2)  Note 520000 - FAQ: Valuated special stocks
    3)  Note 557582 - User exit and valuated sales order stock
    4)  Note 580228 - Incorrect prices for materials procured externally
    5)  Note 983193 - Docu:Externally procurd material in valtd sales order stock
    thanks
    G. Lakshmipathi

  • Accounting Document for New Movement Type

    Good day!
    Here's the scenario: I have created a new movement type in SPRO. I just copied from the existing movement type closely related to what I wanted to create. I executed the transaction in MB1C and it went well and generated a Material Document number. When I viewed the Material Document number in MB03, it has no Accounting Document number. Is there any config that i missed? How can I relate this transaction to accounting?
    Thank you for your assistance.

    hi
    first check which movement type u have copied .
    now check is ur material is valuated for the plant
    now in OMJJ go to ur movemnttype  and in update control u should have value and quantity update entry
    also check if u have used the po as free or if it is initial entry then check ur material master price
    hope it hellp
    regards
    kunal

  • Ref.mov.type for WM

    I am getting an error message 'Error while determining ref.mov.type for WM via Table 156S: 101/ / / /B/X/ ' while creating inbound delivery. Is anyone acquainted with such an issue? Can you please advice?
    I have checked all the config for movement type definations. Everything looks ok. Please let me know if there is a fix.
    Thanks!

    Hi Avi,
    I think, you didn't get me ...
    In the above configuration what I explained, all you need to do is just adding the ref mvt type the one that is missing...it must be currently blank because of which the error what you posted is appearing.  All that you need to do is just add the ref mvt type for the line as explained....
    Remaining checkboxes, indicators etc....you are not even expected to be able to change....
    What it means?  for mvt type 101 of IM, when a material related transaction GR posting happens, for the material type used for setting up the material, in the plant of your concern, when there is no value and qty update is active in material type config, and which is not of special stock related posting, but referencing B - Purchase Order, of Transfer Type ie, stock transfer PO, the corresponding Ref Mvt type required to process further in WM, is missing in IM mvt type assignment (T156)...
    Regards
    Regards

  • Automatic PO form goods receipt without reference Movement type 501

    Hi,
    My client receive sample material from the vendor that is without reference to PO, but upon approval of sample the vendor has to make the payment for which i do not have the reference document number.
    To arive at the solution i wanted to generate automatic PO for movement type 501, for which i have checked the movement type settings, 501- automatic PO, i ahve maintained the info record, and during GR for movement type 501 i enter the vendor even than system is not generating any PO in backend, I have centraalised purchase organization assigned to the plant.
    can anyone suggest me if i am missing any settings,
    Suggestions willbe worth appreciating..\
    Thanks
    Sarf

    Hi,
    You need to configure the following steps for creating automatic PO in MIGO transaction.
    1.Activate the auto PO in Material and Vendor Master.
    2. Maintain the Info record.
    3.Assign the Standard Purchase organisation for the plant you want to create auto Po.
       Path: ENTERPRISE STRUCTURE-ASSIGNMENT-MATERIALS MANAGEMENT-ASSIGN STANDARD PURCHASE ORG FOR PLANT.
    4. Activate create PO automatically for movement type (101,501).
    Path: MM-INVENTORY MANAGEMENT AND PHYSICAL INVENTORY-GOODS RECEIPT-CREATE PURCHASE ORDER AUTOMATICALLY - here you can activate for the mvt type you want.
    5.In MIGO screen, goto menu Settings and click default values , you will get a screen where you can check the mvt type 101,501... are maintained in mvt type column. if not you just enter the mvt type which you want. and click adopt tab.
    6. Now you do GR using 501 mvt type and give the material and vendor ..
    It will work.
    Regards,
    abi

  • Unable to do a goods issue with a movement type with no consumption posting

    Dear Colleagues,
    I have a customer who sellls books, some of these books are printed on demand and hence no inventory is maintained and other books manage inventory as stocks are maintained.
    SD Orders and deliveries are managed for these products.
    However , the customer would like a process in the SAP delivery document to represent the goods leaving the printing plants, ie the goods issue.
    As for materials that do not manage inventory are not visible from the VL06G ( Outbound deliveries for goods issue) transaction. I configured a 'dummy' movement type and assigned it to a schedule line.
    The movement type has the setting 'consumption posting' removed.
    After doing this, the deliveries show up in VL06G, but when attempting to do the post goods issue, I get the following error message  "Deficit of SL Unrestricted-use "
    I have checked all the config that I know and there should not be any availability checks, but shome how it is being checkad at goods issue. Help!!! What am I missing?
    Many thanks
    Henry

    Hello
    From my point of view you need to use a Non Stock Material  (Material type: NOST)  to manage the books .
    then you sell books as you are selling service
    Best regards
    Meher

Maybe you are looking for