Missing Account information when creating Planned Activity in Account
Hi Expert,
When creating planned activity in Account inwebUI, I am expecting that the Account information would be populated in the Account field of a planned activity but it is not. Could you please tell me if this is a SAP standard? Thanks
Check Partner Determination Procedure of Activity Transaction
regard,
vijay.
Similar Messages
-
Getting 'Unable to verify account information' when attempting to setup Hotmail account
I enabled two-step verification today on my Hotmail email account. This is my one and only Outlook account and is my 'primary alias' which is correct. I am able to retrieve email on my iPhone and Windows PC just fine - have logged in and out several times today on the PC with no problem. However I now cannot get this account setup properly on my iPad, though it worked before today. I get the 'Unable to verify account information' message when I try to set up the account new again on iPad. (I was forced to try and delete and reset it up.)
Is this somehow related to the two-step verification? If so I will remove it and go back to single sign in. What do you advise for email on the iPad in this case?
Thanks
Michellekmgilliam wrote:
Is this somehow related to the two-step verification?
Yes.
If so I will remove it and go back to single sign in. What do you advise for email on the iPad in this case?
That's a question for Microsoft. -
When one or more family members who have been sharing one iTunes account wants to create their own iTunes account can they each upload the music/apps from the shared iTunes on their devices to the new iTunes account?
Yes. I would clarify your statement about the "shared" iTunes Library though. If you want each iOS device to have its own music library, you should create separate user accounts for them. Read:
iTunes: How to share music between different accounts on a single computer
How to use multiple iPods, iPads, or iPhones with one computer -
Did you know that Verizonwireless is saving your checking account information when you pay your bill by check and then making it part of your "MyVerizon" without you adding it? This means of course if they get hacked that information could be compromised. What do you think of this?
Credit card and debit card and checking and savings information is encrypted so it is possible to be hacked, but the odds are greater to get hit by the Love Boat then to have a wide scale hack.
Oh yes they do happen, Bank of America, Chase, Citibank, Target and quite a few others. But in all the years I have paid my invoice with saved card information I never been hacked.
You use good passwords and the risk is minimal.
Good Luck -
Cannot generate accounting doc when creating billing doc
When creating billing doc, no accounting document is generated, the posting status is "Error in accounting interface". I have checked and there is no problem in account determination. Does anyone get idea on this problem? Thanks!
Check the account determination in Transaction Code VKOA.
If the data is not maitained to determine G/L, in that case it gives error. Once you maintain the relevant data in VKOA, next go to billing document in change mode VF02 & release the same to accounting.
Regards,
Rajesh Banka
Reward points if helpful. -
Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?
You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway... -
Terms to be agreed when creating a Paid Books Account and submitting an iBook to the iBookstore
Hi there everyone
I'm advising a client on the range of terms to be agreed when its creates an iBook using iBooks Author and then submits the iBook for publication on the iBookstore (using a Paid Books Account, not a Free Books Account).
From what I can glean from various sources, it seems the client needs to agree to:
the iBooks Author 2.0 License Agreement, when downloading the iBooks Author app from the AppStore;
the eBook Agency/Commissionaire Distribution Agreement (when creating a Paid Books Account through iTunes Connect); and
the iTunes Connect Terms of Service when downloading iTunes Producer (the separate app through which one publishes an iBook to the iBookStore).
There are two things I'm not sure about though. The reason for my lack of certainty is that I don't have a US Tax ID and so cannot replicate the Paid Books Account sign-up process to the stage where I'd have to agree to the various terms and conditions. My questions, please, are:
Am I correct in thinking that a person is required, when creating a Paid Books Account through iTunes Connect, to agree to the "eBook Agency/Commissionaire Distribution Agreement"?
If so, can anyone email me please ([email protected]) or provide a link to the latest version of the eBook Agency/Commissionaire Distribution Agreement? (I've seen a version online (http://outskirtspress.com/iBookStore_v3.pdf) but don't know whether it's the latest version; I'm thinking it's probably not).
When signing up for a Paid Books Account, is one also required to agree to the "PHG Terms and Conditions" and the "Publisher Program Terms and Conditions" that are attached to them, or is that optional?
Many thanks for any help. Much appreciated.
Kind regards
RichardAny documents/agreements are obtained as part of a contract and not allowed to be distributed in an otherwise uncontrolled manner, which if done, could violate the agreement/contract.
You need to participate in the process to:
1. Access the latest, binding versions of all agreements/contracts
2. Possess a tax id/SSN to sign up.
If you have questions about the process, you should contact Apple directly.
Global Phone Support
We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
Country
Phone Number
Australia
1300 307 504
Note that this is a low tariff number.
France
0805 540 117
Germany
0800 664 5307
Italy
800 915 902
Netherlands
0800 0201 578
Spain
900 812 687
U.K.
0800 975 0615
U.S.
+1 (877) 206-2092
Toll-free from U.S. and Canada.
Applications:
[email protected] -
Error depreciation run "GL account 2999999 not created in chart of account"
Dear all,
I am facing a very confusing error message. My customer has been live with SAP for over 2 years, and everything has worked fine. This month period 9) they got an unexpected error message during ordinary depreciation run. No depreciation is posted on GL accounts but if you look at asset values in AW01N you can see depreciation is posted on every asset. When I try to run restart depreciation in test mode I get an error message f5507 "GL account 2999999 not created in chart of accounts CASE". I do not understand anything. Why would this account suddenly after 2 years be used in depreciation run? It has never been created or ever used before? I have looked in transaction AO90 and the account is not there.
Very thankful for any help!
Thanks in advance!
Regards, ÅsaHi,
1 - Execute dep test run with list asset check box, then find is there any new assets created with new asset class
2 - Check in AO90 Dep folder
3 - Check retained earning account either existing or not (T.Code: OB53)
4 - If you are using document splliting Check Docuemnt splliting Zero balance GL account
Regards
Viswa -
I opened and itunes account and when asked to verify my account, the link to click on was not there.
Okay, so I just got around to 'trying' to create and Apple ID for my daughter for her ipod as suggested above BUT I accidentally used her b-day and of course she is not old enough!!! So then I got off the internet etc and tried to create an apple ID for her using my b-day and it still would NOT let me, saying that I do not meet the minimum age reqirements!:( I am SO frusterated right now...it is not like I was going to let her have any control over what she purchases anyways, seeing as how she is 7yr. and we are generally strict about what she listens to. Is there any way that I can do this for her?
Thanks! -
TS4020 family with multiple apple accounts, can we create a secondary "family" account?
family with multiple apple accounts, can we create a secondary "family" account?
You can perfectly well create a new separwate iCloud account: for this you will need to create a new Apple ID for which you will need a non-Apple email address you haven't used elsewhere for iCloud.
That done, everyone can sign into it in System Preferences (or Settings)>Mail, Contacts & Calendars and enable the various data types in the checklist there. This is a 'secondary account': its email, Contacts and Calendars will appear alongside those in the existing 'primary account' but you don't get 'push' email (it's checked periodically) and it cannot use PhotoStream.
Note that if you've been using the same device to create other accounts, there is a limit of three iCloud accounts which can be created by any one device, so if that's been reached you would have to use another device: once done the first device can sign into it perfectly well. -
When I try to download apps it says sign in required then I put in my security code but it said its invalid but I know it's correct but I decided to make another apple account but I don't want to give my debit card number what else can I do?
If you only want the free apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID.
You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.).
As regards the security code issue for your current account, take a look here:
http://support.apple.com/kb/TS1646
If that doesn't help, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards. -
Trying to make a purchase on itunes and keep getting prompted to verify account information. I've done this and when i click done, it says to fix errors; i repeat the process then it says to contact apple support. Any ideas or other experiences with this? I've had this happen before and it got resolved after i called them and it took a few days, not very convenient. The same thing happened when I was just trying to update my account info with a new billing / account address.
ThanksYou will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
http://www.apple.com/emea/support/itunes/contact.html
to contact the iTunes Store.
Regards. -
STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.
I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionIntervalHi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK? -
Missing type information when importing external web service
Hello,
using the SAP NetWeaver Developer Studio SAP NetWeaver 7.1 Composition Environment SP06 PAT0003, I have imported a number of RFCs from an R/3. The import succeeded as expected (see [here|http://img25.imageshack.us/my.php?image=importrfc.png]) and I am able to invoke the RFCs as intended.
Now, we have imported these RFCs into a PI 7.1 and published them as web services.
However, when I import these web services rather than the RFCs, the type information for parameters is lost as shown [here|http://img25.imageshack.us/my.php?image=importwebservice.png]. The missing type information is included in the provided wsdl files, though.
Note: Using the current version of the NWDS for the CE 7.1 EhP1 does not solve this problem!
Does anyone has an idea what is going wrong?
Best regards
AlexanderThe type information is actually not missing. However, the used types carry no names. Therefore, the types are displayed as "anonymous" in the NWDS.
-
"Missing port information" when calling web service
I have implemented a web service that works fine as long as I use primitive types as arguments and return types, but when I add a method that takes a user-defined class as an argument, I receive the following error when calling any of the methods in the web service:
[java] java.rmi.RemoteException: received fault: "Missing port information"
(code: "Server" namespace: "http://schemas.xmlsoap.org/soap/envelope/"); nested
exception is:
[java] received fault: "Missing port information" (code: "Server" names
pace: "http://schemas.xmlsoap.org/soap/envelope/")
[java] java.rmi.RemoteException: received fault: "Missing port information"
(code: "Server" namespace: "http://schemas.xmlsoap.org/soap/envelope/"); nested
exception is:
[java] received fault: "Missing port information" (code: "Server" names
pace: "http://schemas.xmlsoap.org/soap/envelope/")
[java] received fault: "Missing port information" (code: "Server" namespace
: "http://schemas.xmlsoap.org/soap/envelope/")
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingS
ender.java:321)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.
java:211)
[java] at qsws.MyItf_Stub.HelloWorld(Unknown Source)
[java] at qsws.WSClient.main(Unknown Source)
The class I pass as an argument implements Serializable and a user-defined interface and it has two public member variables (int and String).
Anyone know why I receive this error?
/MagnusI am also seeing this same error. I have rebuilt and redeployed the service several times, but am still stuck getting this error. Strangely enough, the Tomcat server where the service is hosted is not reporting this type of error. Instead, it is recording an error 500 (Server Internal Error) each time I try to execute one of my services. I trimmed out the meat of the service and configured it so that it would echo the input parameters to the output (they are actually in/out params) but even this reduced configuration gives an error 500. I am inclined to suspect my deployment, but I have checked it several times against the examples.
Anyone else see the error 500 reported as missing port information?
Maybe you are looking for
-
My MacBook Air was put on sleep mode and a couple of hours later I attempted to turn it on and no response. I called apple support and went through the process to try to power it back on and it would not turn on . Nothing would show on the screen and
-
Acr opens raw in bridge but not in photoshop cs5
When opening a raw (RAF ) file in bridge everything works fine ,when I want to open the file, ps cs5 opens the file, no problem. But when opening the same file in ps, acr comes up and when I click open image, I get the message " could not comlete yo
-
I downloaded the lion recovery update and new mac os and now my power adapter doesn't work
Any ideas how to fix this? I have tried different adapters, different outlets, etc and nothing works.
-
IPhoto Conversion to QuickTime, but NO AUDIO from soundtrack
I cannot seem to get any of the soundtrack from my iPhoto slideshow to transfer to the QuickTime movie. All the appropriate boxes and settings in iPhoto have been checked prior to exporting the slideshow. Any ideas?
-
Monthly charge increased with zero warning?
Hello, I'm on the "High Speed Internet Enhanced" dry-loop plan, which was a consistent $44.99 a month. This month, I see I've been charged $49.99. I looked at my past four saved bills and there's zero mention of an upcoming rate increase. But beyond