Missing Acount Assignment Error
Hi,
We use activity act assigned networks to raise PR/Reservation when activity is released.I have attached a material component and a service activity element to an internal activity and am trying to release the activity to get the PR/Reservation but am getting an information pop up that the activity cant be release-maintain account assignment and the Res/Pur Req indicator turns to "Never" from "from release".I have checked and all the relevant data is maintained.When I save the network ,no data is changed and I get a SAP Express Office having the following details-
Update was terminated
Created Mohammed Haque on 23.02.2010 08:29:06
Update was terminated
System ID.... RQ2
Client....... 700
User..... 00928478
Transaction.. CJ20N
Update key... 4B82B7DC45100C3EE100800026510A01
Generated.... 23.02.2010, 08:29:06
Completed.... 23.02.2010, 08:29:06
Error Info... ME 808: System error: error during update Table EBKN
which suggests that PR table is not getting updated.
Can anyone please advise what might be wrong here and what can be done to rectify this.Any help/input will be highly appreciated.
Regards,
Mohamed
Dear Mohamed,
Are you maintaining the Assignment of WBS element in the network? If so, did you enable the tick on ACCT button against the WBSE?
And also, check in the Transaction OPTT, whether the account assignment gen is maintained as N or not?
Please check and revert.
Regards,
Praveen
Similar Messages
-
PPOME - Org.Unit (Acount assignment) goes into DUMP
Hello Gurus,
ive got a Big issue, concerning SAP HR module.
When we start the TC: PPOME we select org.unit from the structure.
It is beeing showed normaly, but only when we select Acount assignment it goes straight into DUMP,
saying:
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
In the system profile, set the parameters
-abap/heap_area_dia and
-abap/heap_area_nondia
to a maximum of 189714480. To be on the safe side, reduce the value by 10,000,
000.
Then restart the SAP system.
These corrections are not needed since the system for every other purpose (SD, MM, FI) is working, only for HR module during acount assignment is going into DUMP.
Any advice why this happens to some of the Org.Units?
Regards,
Laurynas PrikockisHi ,
Please check this thread might be helpful.
Runtime Errors STORAGE_PARAMETERS_WRONG_SET
Regards,
Siraj. -
Missing item assignment for "Minority interest in the balance sheet"
Dear Experts,
We unable to perform "Consolidation of investment" and "Validation of Consolidation data" due to our 2 newly created ECCS Accounts not properly assigned. Can any experts guide me how to mapped it? Your fast action is very much appreciated.
Regards/LisaDear Dan Sullivan,
I have created 2 news ECCS Accounts named as SHARE CAPITAL & SHARE PREMIUM. And i do not know how to eliminate these 2 new ECCS accounts with INVESTMENT IN SUBSIDIARY COMPANIES.
When we performing CONSOLIDATION OF INVESTMENT, the error message showed "Missing Item assignment for Minority Interest in the Balance Sheet" and "No Items are assigned to the items (Newly created ECCS Account)".
Further when we run VALIDATION OF TOTALS DATA, the error message showed "Total Assets is not equal to Total Liabilities + Equity" in Step 002. -
About acount determination error
hello,
In home pc i have cin settings in 000 client, but i dont have the same in another client 800, is it possible to run cin after configuring in 800 client, suggest me.
At the time of stock posting in 000 client i have received an acount determination error once gothrough and give me ur valuble suggestins.
========================================================
I have copied the company code from 0MB1
Account determination for entry 0MB1 GBB not possible
Message no. M8147
Diagnosis
The system did not find an account for this transaction. This means that the account determination for key 0MB1 GBB is not maintained in MM Customizing (Valuation). The key is made up of:
 Chart of account
 Transaction key (= Posting transaction)
 Valuation grouping code
 Account grouping code
 Valuation class
System Response
The system cannot update a G/L account for this transaction. You cannot post the transaction.
Procedure
Contact your system administrator.
If you have the authorization, check the Account determination in Customizing for Valuation.
Proceed
Note
The relevant posting transaction can be found in Table T030A.
suggest me
OMWD-0001 i did it, but no impact was there
suggest me,Hi
Go to OBYC---> Choose Transaction Event Key, GBB and Go in to Deatails-->The system ask for Chart of Accounts ....and Give your Chart of Accounts---> For your Valuation Grouping Code, Account modifier, Valuation Class combination assign GL Account...
1)In Transaction code, OMWD, For your Valuation Area, You can find your Valuation Grouping Code
2)If you are doing 561movement type in MB1C, then the Acc.Mod. is BSA
If you are doing 501movement type in MB1C, then the Acc.Mod. is ZOB
If you are doing 521movement type in MB1C, then the Acc.Mod. is ZOF
3)Valuation Class for your material, you can find it in your Material Master....Accouting 1 view
If you do the above setting your problem will be solved.
Reward if useful
Regards
S.Baskaran
Message was edited by:
baskaran srinivasan -
The boot configuration data for your Pc is missing or contains errors: error code 0x000014c
Hello,
See if any body may help here... I get this blue screen:
RECOVERY
Your PC needs to be repaired:
The Boot Configuration Data for your PC is missing or contains errors.
file:\\EFI\Microsoft\Boot\BCD
Error code: 0xc000014c
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a a disc or USB device), contact your system administrator or PC manufacturer.
Press Esc for UEFI Firmware Settings
First I was able to get into the option 11 and run the whole factory reset, i was so happy because I tought it will be easy.. but then after I did the factory reset.. I keep getting this blue screen. if I press ESC I get into this next screen:
F1 System Information
F2 System Diagnostics
F9 Boot Device Options
F10 BIOS Setup
F11 System Recovery
ENTER - Continue Startup.
this is what happen when I click any of this options:
F1 I get into the System Information with no problems, then I click <ESC> to continue and get back to the last screen... then I press F2 and super, I am able to run Memory Test and Hard Drive Check 100% with no problems in any of those, after I am done with my teste I press exit and I am back to the F1,F2, ETC menu... now I want to try F9, F10 or F11. bummer.. in this 3 options I get back to the blue screen described at the beggining of this post. (I already connect a USB with an boot loader, which works perfectly)
so I can't do anything, nothing at all!! crazzines.
So what I did to check why I can't get into the BIOS or at least to boot from my USB... I removed the botton cover of my laptop and removed the hard drive and that's how then I was or I am able to Log into the BIOS, - I did the changes to boot first from the USB and then from the HD and this is how I was able to boot from the USB - BUT If I connect back the Hard drive, I am not able to get into the BIOS or boot from the USB - so basically I am stuck in this blue screen and I can't boot from a USB if I have the HD connected.. I can't use any option.. no BIOS, nothing.. only if again, i disconnect the HD.
This is an:
HP ENVY TS Sleekbook 4
PRODUCT NUMBER D1A99UA#ABA
SYSTEM BOARD ID: 1894
Bios F.25
**** I though that by updating the BIOS I may be able to get help, nothing. What I did is, I removed the HD and then and boot from the USB and with a DOS command propmt I excecuted the Bios Update from F.21 to f.25... but again, when I installed the hard drive back, BUMMER, nothing I can't do nothing but this silly blue screen.
Any idea of what should I do?
Thanks in advance.
This question was solved.
View Solution.If you can't access BIOS with the hard disk connected, you certainly won't be able to boot to the usb recovery flashdrive. That is indicative of a failed hard disk.
Install a new hard disk and then boot to the recovery flashdrive.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Hi,
I am having a few problems with bootcamp on my imac. When i tried to move the bootcamp partition on windows 7 into free space, it crashed and turned off. Ever since i have had the error 'Missing operating system' and it fails to boot. I have some very important files on the bootcamp partition. Is it possible to recover these files or even to restore the bootcamp partition to it's original state? I do not have a backup of my bootcamp partition. Another problem i have is that ever since i tried to expand my macintosh HD partition into free space, when i hold alt while booting up (to choose which partition to boot like i normally do), the bootcamp partition has stopped appearing. This means that i cannot even boot the windows 7 bootcamp partition anymore!
So basically here are my 2 questions:
How can i restore/recover files from Bootcamp with Boot Failure - Missing operating system error?
How can i make the Bootcamp partition appear in Startup Disk and when i hold the option key while starting up my computer to allow me to boot windows 7?
Any solutions are very much apreciated!
Thanks!
I know that bootcamp (disk0s4) hasn't been fully deleted since it appears in disk utility (i cant do anything to it though)
And here is the error i see when i try to launch bootcamp (back when i was actually able to boot up bootcamp to the error screen)WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays. -
Using Rollup to get subtotals and grand total - missing right pren error
Hello,
I am trying to create sub totals by person_id and a grand total row in my APEX report but I get a "missing right pren error." I finally figure out that I need to eliminate column alias names to fix this problem, however, I now get an ambigous column reference. I am making this change in my main SQL report statement, however, I was wondering if I should be using the "group by Rollup" somewhere else while using "Break Formatting."
I would appreciate any help.
Thanks
lehCan you post the Query please?
-
Missing right parenthesis error when querying using a list of values
Would anyone know why this statement gives the ORA-00907: missing right parenthesis error..?
SELECT FIELD_X
FROM TABLE_Y
WHERE FIELD_X IN (
'AJD'
'RED'
'ADF'
'MOI'
The reason why I wanted the AJD, RED, ADF, etc values on top of each other is because I need to add the single quotes around those terms in Excel before pasting them into the SQL statement (there are actually over 400 terms so above just shows a subset)Fortunately the SQL syntax is documented in the SQL manual
{ expr [, expr ]...
| ( [expr [, expr ]] ...)
}http://download.oracle.com/docs/cd/E11882_01/server.112/e10592/expressions015.htm#i1033664
Note the comma following each value in the syntax diagram and examples. -
CO Object assignment error in MB1B
Dear All,
While doing transfer posting with movement type 453, system is showing CO object assignment error.
CO object not assigned to cost element error..........
Wiating for reply.
Thanks & regardshi
go to OKB9 here give assignment of cost center and cost element
regards
kunal -
While doing service in service po we get account assignment error pls help
while doing services in service po we get error account assignment error (se181) pls help to resolve
Hi,
a service line can be never saved WITHOUT the account assignment details (except acc. ***. category U in in the PO item).
In case the table ESLL will have entry but the accounting tables eskl has got no entry or has entries with deletion flag, it would be an inconsistent situation.
You can set on the screen SAPLMLSK 0200 the deletion flag (ESKL-LOEKZ) for your service account assignment, but without entering a new account assignment information the system would not allow you to leave this screen. When you set the deletion flag for service line in the account assignment detail screen, you must enter right afterwards a new account assignment information in order to leave the screen without the error message 06 408.
Regards,
Edit -
OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
Windows 8.1 installation first reboot 0xc000007b ntoskrnl.exe missing or contains errors
I'm trying to install Windows 8.1 (with updata 1) using UEFI on my Intel DP45SG.
Starting up the installation by using UEFI works fine, but after the files have been copied and the system reboots I get the following error code: 0xc000007b ntoskrnl.exe missing or contains errors
I've tried reformatting my USB stick and recopying the files, as well as re downloading the installation files but this hasn't resolved the problem.
Is there anything I can try to fix this? Perhaps give some commands in the commands prompt?Hi Gi,
It might be caused by changes in Windows 8 PnP in which Boot Start Drivers are not installed by default.
Please try following
the instructions as mentioned in the KB aticle.
https://support.microsoft.com/en-us/kb/2751461?wa=wsignin1.0
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
"Missing parameter values" error on Export
Hi,
I am getting "Missing Parameter Values" error if all required parameter values are not passed in the report through application. Same error is not coming when all the parameters are passed.
And parameter window also not displaying if all parameters are not passed to the report for export option. (Parameter window displaying on preview option if all the parameters are not supplied).
I have tried both Report Viewer's ExportReport function & ReportDocument's Export function. But both are results same.
Software details:
Crystal Report created in Version: 10.0.0.533
.Net 2005
10.2 Crystal component. Crystal Runtime Version - v2.0.50727 and DLL Version - 10.2
Please help me to resolve this issue.
Thanks,
Venkateswaran.PGiven example is not working as expected.
1) Calling of ExportReport() function invokes the file Save As window to save the exported file eventhough exported path & file name supplied in the program.
2) After accepting the output file name, "Missing parameter values" error coming instead of displaying Crystal's Parameter window.
Below is the piece of code to export the output. I am calling Export() function if all the parameters are supplied by the application otherwise i am calling Viewer's ExportReport() fuction. Please have a look and let me know if any code change is required.
ReportDocument crRepDocument;
String m_strExportPath;
Boolean bUseRepViewExport = false;
if( crRepDocument.ParameterFields.Count > 0 )
if (m_Parameters.Count < crRepDocument.ParameterFields.Count)
bUseRepViewExport = true ;
ExportOptions crExportOptions;
DiskFileDestinationOptions crDiskFileDestinationOptions;
crDiskFileDestinationOptions = new DiskFileDestinationOptions();
crExportOptions = crRepDocument.ExportOptions;
if (base.m_ExportFormat == eExportFormat.RTF)
crDiskFileDestinationOptions.DiskFileName = base.m_strExportPath + ".rtf";
crExportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
crExportOptions.ExportFormatType = ExportFormatType.RichText;
crExportOptions.DestinationOptions = crDiskFileDestinationOptions;
else if (base.m_ExportFormat == eExportFormat.PDF)
crDiskFileDestinationOptions.DiskFileName = base.m_strExportPath + ".pdf";
crExportOptions.DestinationOptions = crDiskFileDestinationOptions;
crExportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
crExportOptions.ExportFormatType = ExportFormatType.PortableDocFormat;
else if (base.m_ExportFormat == eExportFormat.DOC)
if (bUseRepViewExport) //If all the parameter are not supplied. I calling Viewer
FormReportViewer oFormReportViewer = new FormReportViewer();
oFormReportViewer.CrystalReportViewer.ReportSource = crRepDocument;
oFormReportViewer.CrystalReportViewer.ExportReport();
return true;
else
crRepDocument.Export(); //
return true; -
I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?
In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again! -
Attempting to install the "missing plug-in" using the Firefox prompts results in Java 7 Update 10 being installed, re-installing it is successful and does not resolve the issue, Firefox 18 refuses to allow/display java content even with the proper updated version of Java installed.
This problem ONLY occurred immediately following this mornings update to Firefox 18.0.Context:
Yesterday: Java working fine.
This morning: Update to Firefox 18.0
Java will not work, not at all even with Java 7 Update 10 installed, not even the "verify java version" applet at http://www.java.com/en/download/installed.jsp will display.
When attempting to view/display any java content the "missing plug-in" error bar at the top of the page displays and attempting to install the required plug-in via that method does not resolve the issue even though the correct version of Java is installed and the plug-in checker verified it was "up-to-date".
Maybe you are looking for
-
Firefox won't allow typing into Google search bar whereas Chrome will
Hi, I'm currently running Firefox 6.0.2 on Windows XP SP3 with Outlook 2003 SP3. No changes made recently to anything. Suddenly several errors happening at once, most involving Firefox. 1) Homepage Google. I cannot type anything in Google search bar.
-
ITMS problems after upgrading to 6.0.4.2/Win
Background I previously used iTunes 6.0.2 on my Windows XP SP2 machine, without any problems. My last transaction was the purchase of a multipass for the Daily Show; using it, I successfully downloaded the two episodes available at the time. The next
-
Why does moving the mouse over an IMAQ image display slow the GUI down so much?
I have a large application with several vi's running simultaneously under labview 8.6.1. When I mouse over an image display control in one of the vi's, everything slows down a shocking amount in all the other vi's. The windows task manager does not
-
How does the Apple Headphones with Remote Replacement Program non-return fee work?
I have a pair of Apple In-Ear Headphones with Remote and Mic that I purchased a year ago. According to the "Apple Headphones with Remote Replacement Program", http://www.apple.com/support/headphones/replacementprogram/, these headphones are also cove
-
Solaris 10 physical to Solaris 10 zones via flash archive
Hi, I need to migrate E25K domains (all Solaris 10) to zones on an M9000. The solution architect has suggested zones on the M9000 made from flash archives of the source E25K domains for speed & simplicity (read : avoid a rebuild of the application en