Missing Actions Palette Control Button Icons

I seem to be missing all of the control button icons in my Actions Palette. Can anyone tell me how to restore them?

deselect Button Mode from the fly-out menu

Similar Messages

HT4623 SOMEHOW the icon for rotation lock is missing from the control bar. I tried to reset but my passcode doesn't work. First, how do I find my passcode? Then, if I reset, will it return the rotation lock to the control bar?

I don't know how it happened why, but the icon for rotation lock is missing from the control bar. Second problem, the passcode for my iPad isn't working. I wrote it down, so not sure what the problem is. HELP

If the setting for the rotation lock is missing it is because you are using the side switch to control the rotation in Settings>General>Use Side Switch to>Lock Rotation. The software switch in the control center should be for Muting system sounds.
you have to restore the iPad in orde to unlock it now.
iOS: Forgotten passcode or device disabled after entering wrong ...
If you are sure that you are entering the correct passcode, reboot the iPad and then try again and see if it is accepted.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

If your Send / button icons are missing in new messages in Mail, do this

I was mystified as to why the button icons (for Send, Attach, etc) were suddenly missing from my "new message" email windows. The text descriptions were still there, so i could use the functions, but they were in tiny text, more difficult to click on. Trying to drag the icons back on from the view/customize toolbar menus (as was suggested in prior discussions i found here here) did not work.
Then i noticed a drop-down menu called "Show" in the bottom left of the View> Customize Toolbar window (opened directly from a New Message window). It toggles whether you see Text Only, Icons and Text, or Icons Only. Mine was somehow set to Text Only. Just toggling it to Text and Icons brought my buttons back.
I don't know how that preference got changed- i didn't do it, and no one else has access to my Mac- and it looks from Discussions like this has happened to others, and only while in New Message (a glitch?).
This is the simple but not immediately apparent fix.

Thanks Bernd: I am using Adobe Acrobat 10 Pro. I did get a response from Dave Marchant which directed me how to find the layers icon and I found the options icon as suggested in Adobe Help. However, the options do not allow me to choose an option of either merging layers or flattening layers. I am a novice at this and am trying to get this 1-page pdf graphic to convert to a Word document. Is it possible that I already have a single layer pdf and that Word is doing something weird during the conversion? I tried to convert the document yesterday and I ended up with two pages in Word. One page had the text boxes and one had the river channels on which the text boxes had been inserted. This is not a document I created. We have been struggling for 5 years at various times to get this one page document into Word so that it can be used in multiple reports. Even the graphics departments at a couple of companies have not been able to get this document resized from the original 11 x 17 format into 8.5 x 11. I managed to get that done yesterday. But now can't get a useable version into Word. Suggestions?

Where is controls palette search button in 8.20?

This is embarrassing! I rely heavily on the control and function palette search buttons. I updated to 8.20 and my control palette search button disappeared. The function palette search button is in its normal place. I've looked through Help and the Options popup but don't see a way to enable/disable the search button. I need it back!
Jeff
Climbing the Labview learning curve!
Sanarus Medical
Pleasanton, CA

The search button should be right there so something is wrong....
Try to repair the labview installation.
Also check your LabVIEW.ini file for weird entries.
LabVIEW Champion . Do more with less code and in less time .

Programmatically change settings for "Button mode" in actions palette

Hi,
I am making an addon installer for Adobe Photoshop for Mac. After installing, I need to open a ".atn" file, and from the action palette , set it to "Button mode". How can I set the mode programmatically? Is there a plist or xml or setting file that I can modify to set its mode to "Button mode"? Or is there support for this in AppleScript dictionary? Thanks.

I am making an addon installer for Adobe Photoshop for Mac.
That’s certainly beyond my grasp, so please excuse if the question is useless, but if you load the atn-file anyway could you not use a Configurator Panel for those Actions instead of trying to change the Actions Panel’s settings?

Control Buttons on Action Panel

The control buttons are not visible on my Actions Panel making it impossible for me to record actions. Can anyone provide guidance on how to make them visible?

Are you in Button mode? If so switch to normal mode by deselecting Button Mode on the panel menu.

Missing Control Buttons

My beta (WIN)versions of LR lacked the minimize / maximize / exit buttons that one normally sees in the URHC on any program. When I installed the shipping version of 1.0 I had thought that they would be there, especially since they show in the printed images in the cheesy little manual that accompanied the shipment. No dice, neither did they appear with the install of the 1.1 update. When I installed the 1.2 update today I was hoping they would appear. Still no control button on my install. Once LR is running, the only way I have of minimizing or maximizing it is to click on the LR icon in the system tray. How do I fix this annoying "feature?"

Maybe a couple times.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.10 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/

[Solved] Rhythmbox Missing Button Icons

I've been installing and uninstalling Rhythmbox with no luck fixing issues with the player. All of the button icons are missing (just a red X showing). When I play a track the Pause and Album Artwork icons appear, but none of the others are visible. I've been using Pacman, then tried makepkg with the AUR, but the makepkg kept returning an error at the end. There is a download on the Gnome website for the player, but I'm not sure if that can be installed with Arch. I'm wondering if this is a bug or something with my configuration.
Last edited by forkenbrock (2013-09-22 18:06:53)

my guess is youre using an impoverished icon set. not a lot of info here. so check your settings.
It is not advisable to install an outside package. it just needs a tweak or two
Last edited by rufus (2013-09-09 07:57:04)

Create data control button missing from menu

I'm using Jdeveloper 11.1.2
1. I create a new Application
2. create a new JavaClass under viewController
3. right click the class
and...
I can't find the create data control button and create webservice button
I do the same operation on another computer , it appears !
why ?
is ther any settings I need to turn ?

If you do not bother about loosing your current IDE preferences then close/kill jdev and try deleting the jdev system directory. Start jdev again.
Refer http://tompeez.wordpress.com/tag/system-folder/

JQuery mobile button icons missing in dwcs6?

Hi
Does anyone know why the button icons for jquery mobile would not be showing in swatches panel?
Any help much appreciated.
dw cs6 v12 b5808
osx 10.7.4

Hi Corey_,
This is NOT an Adobe support site. It's a user-to-user forum.
Have you selected a Theme?
http://www.htmlgoodies.com/html5/mobile/jquery-mobile-in-adobe-dreamweaver-cs6.html#fbid=T J4wk_LxRHZ
Nancy O.

Volume control buttons don't work for iTunes in speaker mode

Using onboard speakers (no headset on my iPhone 4S, the speaker buttons are not working. In fact the slider ICON in missing in playing music as well as the ringer ICON that comes up when I press the buttons.
I can go into settings, Sounds and manually move the slider for Ringer and Alerts, with "Change with Buttons" set "on, I can then press the volumn buttons on the side and see the slider move up and down (right and left). But as soon as I leave that screen and press either volumn up or down on the side, the Ringer ICON comes up but the slider part is gone.
In this case, there is no sound out of the speakers. However "Siri" works fine.
And in phone mode, I can use speakerphone and hear audio out of the speakers. (In fact in phone mode, speakers or headset works fine).
All other apps the speakers are inop and the volum control buttons are inop.
It's like it's in perminent "mute".

https://discussions.apple.com/thread/3938840?start=0&tstart=0
I got out my air compressor and literally blew the S* out of the docking port. I did dock the iPhone to my car dock port as a test, played music through the car. Then undocked and the volume control and speaker sounds all restored.
Not 100% it was cleaning the docking port or that I unwedged the software by docking into some different device.

Romote controll button activation - Please

Could someone help me and tell me how to allow the remote control buttons
to function for a DVD I have created I can not figure out how to connect them through the connections pane. any help is very much appreciated!

Many of the buttons have default settings which can't be changed. However, you can alter the menu call, Title menu call and return button (if it exists on your handset).
Click on the disc icon in outline view, then look in the property inspector - you will see the drop down settings boxes for the remote control there - these are the overarching settings which would govern the entire disc behaviour for these buttons.
However, you can over ride the disc settings within an individual track. Click on the track in outline view and check the property inspector again. You may see the remote settings set to 'Same as Disc' - they have inherited the disc level settings. You can simply change these to what you want for each track, story or slideshow.
There are other settings which you can use, called User Operations. These govern fine detail in the playback and use of the remote control, and are generally left alone unless you know what they are doing. You can, for example, disable the handset button for fast forward, or disable the menu button completely for a particular track - such as an intro FBI warning - so that the viewer has to watch it. You can also disable or enable a whole raft of other controls in there as well... use with caution!
Finally, you need to be aware of how the buttons actually respond when you are in different locations on your DvD. For example, if you play a track and use the menu button, you will go to a menu. If you press the menu button again when you get there, you go back to the track (it acts like a resume function). This is all normal and yet causes so much grief when people expect it to take them up through the menu hierarchy. The Title button will take you to the first menu on your disc from pretty much anywhere (unless it is disabled). The return button is designed to move you through the menu hierarchies, but there are limitations on its use.
The other buttons generally can't be trapped and made to perform anything other than their default actions as defined by the DVD Spec.

Illustrator CS5 closes the Actions palette

When I click 'File > New', my Actions palette suddenly vanishes from the workspace. If I re-enable it, it appears in the correct position.
Sometimes (usually), it is already missing when I start the program.
I have tried the following but none have cured the problem:
- Re-saving workspace with original name, and with new name
- Enabling and disabling Button view in Actions palette
- Docking the palette to others, and undocking it
- Moving it to various screen positions
- Rebooting the PC
- Spending >1 hour trying to searching for an existing solution using the world's most ineptly-designed support website ...

I also started having this problem yesterday too. I tried everything from deleting all my fonts except the standard ones, deleting preferences and re-installing but nothing seemed to work.
I fixed it though by doing the following:
1. Going here and downloading the "amtlib.dll.rar" file.
2. Extracting it to a folder on my HD.
3. Navigating to "C:\Program Files\Adobe\Adobe Illustrator CS5\Support Files\Contents\Windows".
4. Copying (or cutting) and then pasting the "amtlib.dll" to the above folder overwriting the file that's there (you can back it up before hand if needed).
I could then startup Illustrator CS5 without any problems. So there seems to be a problem with the "amtlib.dll" file, I don't know whether certain fonts can corrupt it or not but this fixed it for me.
-Good Luck!!

Crystal Report/STRUTS: Error (404) when clicking on Control Buttons (Print, Export, Next, Previous, etc...) on report viewer

Post Author: jwenny
CA Forum: Deployment
Need help badly!!!
We are using the crystal reports plugin for STRUTS.
We are able to display the report in the crystal report viewer. However, when we click any control buttons (print, export, etc...), then we get:
JSPG0036E: Failed to find resource /Report-viewer.jsp
We then moved Report-viewer.jsp to the WebContents folder (root directory) and got a different error when we clicked any control button:
Error: 400 page not found
Does anyone know how to solve this problem? For instance, is there a setting or parameter that needs to be set?
Greatly appreciate any help!

HI,
Whenever we print the viewer does an auto postback, I believe due to this some of the values are getting missed. Moreover we are referring to the viewer and reportdocument object, it seems. So can you try this simple code in an application to see if it helps:
ReportDocument rdoc = new ReportDocument();
rdoc.Load("C:\TASKECrystalReports\Intraday.rpt");
rdoc.SetDatabaseLogon("uid","pwd");
rdoc.SetParameterValues("parameter name","value");
CrystalReportViewer.ReportSource = rdoc;
Helps?
Thanks.

Mode, audio/video control buttons on Satellite A20-S103

Hi,
Can anyone tell me how to set this controls? (this controls buttons are on front of the notebook.)
I don't have any more original cd which come with this notebook and i don't know how to set them. If i press any of this keys nothing happens. I'm not shore my be this buttons are related only with Toshiba Media Player, if yes where can i find it and download it?
Thanks in advance
Darko

There are not so many drivers that you can miss it. Just download the driver for "Controls" which version is 2.6.2900 and remove the software you installed before so you can be sure that the downloaded one can be properly installed.
I dont understand why it doesnt works. If you have XP and you installed it by using the "setup.exe" then I dont really dont know where the problem is..

Missing Actions Palette Control Button Icons

Similar Messages

Maybe you are looking for