Missing "Add Records" and "Refresh Records" options for data sets post domain re-import
We recently had to re-install the Endeca server and as part of which had to export and re-import the data domains. Everything went fine except for the fact that newly re-imported data sets showcase just the "Manage Attributes" and the "Delete Data Set" options for an administrator login in. The previously available options to "Add Records" and "Refresh Records" beyond manage attributes/Delete Data Set are missing.
Thoughts? Is there a security setting to enable these?
So are you talking about the Add Records and Reload Records options for a data set in Studio?
There are no separate security settings for these options. If a user is an application administrator (is able to edit the application), then they should have access to these options.
The options are only available for data domains created using the Provisioning Service (created by uploading a file or from the JDBC or BI Server data source from the Data Source Library).
I don't know if the process of exporting and re-importing the data domains (not sure how you did that) could somehow cause the data sets to no longer know that they were created by the Provisioning Service, in which case those options would not be enabled.
Similar Messages
-
Info record and source list mandatory for PO creation?
Hi Gurus,
Client wants to make Info record and source list mandatory for PO creation?
If Inforec and source list not available for that material, then user can't able to create PO.
How can I achieve this requirement?
Any user exit available?
pls help..Hi ,
SproMM-Purchasing -Source ListDefine Source List Requirement at Plant Level
If u mark the indicator then the Source list is mandatory for all the materials procured.
If u want for a speciic material , mark it in purchasing view of Material Master.
Inorder to create a source list , inforecord is mandatory -- this is by default Standard SAP .
Regards
Ramesh Ch -
The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts. I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone. I tried turning contacts for both off and on and rebooting, but it didn't help. Any ideas?
Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting. You would need to check with your employer's IT department to confirm this. You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.
-
IDoc Control Record and Status Record Code, where is it!!!
Hi,
Where can i see the code for generation of control record and status record of IDoc.
Thanks in advance for your answershi ,
1.first create an segment with the fields u want tcode we31 relase it .
2. create an idoc and assign segment to it tcode we30.
3.crate a message type tcode we81
4.assign that message to idoc tcode we 82.
do the ale configarations .
now u can write the code in our sender system
*1. Create parameters/select-options for input data. i.e., message type, logical system.
parameters : p_mestyp like edmsg-msgtyp default 'ZKKUMSG',
p_logsys like tbdlst-logsys obligatory.
*2. Create Data objects for control record, data record and database table.
data : c_segment like edidd-segnam value 'ZKKUSEG', "Data record (IDoc)-Segment type
c_idoctp like edidc-idoctp value 'ZKKUIDOC'. "Control record (IDoc)-Basic type
data : begin of i_tab occurs 0,
ZKSNO like ZKSTD-ZKSNO,
ZKSNAME like ZKSTD-ZKSNAME,
end of i_tab.
data : w_itab like i_tab.
data : s_segment like ZKKUSEG.
data : i_edidd like edidd occurs 0 with header line.
data : i_control_record like edidc.
data : i_comm_idoc like edidc occurs 0 with header line.
*3. Select the data from responding tables into internal table for a defined condition.
here you have take ur internal table
*select single zsno zsname from zkiran into corresponding fields of itab where zsno = p_sno.
*4. create control record into internal table.
i_control_record-mestyp = p_mestyp. "Message Type
i_control_record-idoctp = c_idoctp. "Basic type
i_control_record-rcvprt = 'LS'. "Partner Type of Receiver
i_control_record-rcvprn = p_logsys. "Partner Number of Recipient
*5. create data record into internal table.
*i_edidd-segnam = c_segment.
loop at i_tab into w_itab.
s_segment-zksno = w_itab-ZKSNO. "Application Data
s_segment-zksname = w_itab-ZKSNAME.
i_edidd-sdata = s_segment.
i_edidd-segnam = c_segment.
clear w_itab.
append i_edidd.
endloop.
*6. Process ALE Service Layer using the function module MASTER_IDOC_DISTRIBUTE. It returns the corresponding IDoc No.s.
call function 'MASTER_IDOC_DISTRIBUTE'
exporting
master_idoc_control = i_control_record
tables
communication_idoc_control = i_comm_idoc
master_idoc_data = i_edidd
exceptions
error_in_idoc_control = 1
error_writing_idoc_status = 2
error_in_idoc_data = 3
sending_logical_system_unknown = 4
others = 5.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*7. Display Communication IDocs.
loop at i_comm_idoc.
write : / 'Communication IDoc No. is : ', i_comm_idoc-docnum.
endloop.
*8. Commit Work.
commit work.
i hope this sample code help u .
thanks -
How to print the error records and success records in bdc
how to print the number of error records and success records in bdc
hai,
plz refer this program,
Z_130399130271_A
REPORT Z_130399130271_A
NO STANDARD PAGE HEADING LINE-SIZE 325.
*INCLUDE YVALIDATE.
*include bdcrecx1.
INCLUDE YINCLUDE399.
DATA ITAB LIKE TABLE OF FILE_TABLE WITH HEADER LINE.
PARAMETERS: DATASET(132) LOWER CASE.
DATA : RC TYPE I,
ERR(40) TYPE C,
SUCCESSCNT TYPE I VALUE 0,
FAILCOUNT TYPE I VALUE 0.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
DATA: BEGIN OF RECORD OCCURS 0,
data element: LIF16
LIFNR_001(016),
data element: KTOKK
KTOKK_002(004),
data element: ANRED
ANRED_003(015),
data element: NAME1_GP
NAME1_004(035),
data element: SORTL
SORTL_005(010),
data element: STRAS_GP
STRAS_006(035),
data element: PFACH
PFACH_007(010),
data element: ORT01_GP
ORT01_008(035),
data element: ORT02_GP
ORT02_009(035),
data element: LAND1_GP
LAND1_010(003),
data element: REGIO
REGIO_011(003),
data element: SPRAS
SPRAS_012(002),
data element: TELF1
TELF1_013(016),
data element: TELF2
TELF2_014(016),
data element: BANKS
BANKS_01_015(003),
data element: BANKK
BANKL_01_016(015),
data element: BANKN
BANKN_01_017(018),
END OF RECORD.
DATA: BEGIN OF ERRORITAB OCCURS 0,
LIFNR_001 LIKE LFA1-LIFNR,
KTOKK_002 LIKE LFA1-KTOKK,
ANRED_003 LIKE LFA1-ANRED,
NAME1_004 LIKE LFA1-NAME1,
SORTL_005 LIKE LFA1-SORTL,
STRAS_006 LIKE LFA1-STRAS,
PFACH_007 LIKE LFA1-PFACH,
ORT01_008 LIKE LFA1-ORT01,
ORT02_009 LIKE LFA1-ORT02,
LAND1_010 LIKE LFA1-LAND1,
REGIO_011 LIKE LFA1-REGIO,
SPRAS_012 LIKE LFA1-SPRAS,
TELF1_013 LIKE LFA1-TELF1,
TELF2_014 LIKE LFA1-TELF2,
BANKS_01_015 LIKE LFBK-BANKS,
BANKL_01_016 LIKE LFBK-BANKL,
BANKN_01_017 LIKE LFBK-BANKN,
ERRORMSG(60) TYPE C,
SERIAL TYPE I VALUE '1',
END OF ERRORITAB.
End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR DATASET.
CALL FUNCTION 'TMP_GUI_FILE_OPEN_DIALOG'
EXPORTING
WINDOW_TITLE = 'select a file '
DEFAULT_EXTENSION = 'TXT'
DEFAULT_FILENAME = 'ASSIGN5.TXT'
FILE_FILTER =
INIT_DIRECTORY =
MULTISELECTION =
IMPORTING
RC =
TABLES
FILE_TABLE = ITAB
EXCEPTIONS
CNTL_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE ITAB INDEX 1.
DATASET = ITAB-FILENAME.
WRITE DATASET.
START-OF-SELECTION.
*perform open_dataset using dataset.
*perform open_group.
DATA T TYPE STRING.
T = DATASET.
IF T EQ ' '.
MESSAGE E110(ZX).
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = T
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
CLEAR RC.
CLEAR ERR.
*read dataset dataset into record.
IF SY-SUBRC <> 0. EXIT. ENDIF.
RECORD-KTOKK_002 = '0001'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'RF02K-LIFNR'
RECORD-LIFNR_001.
PERFORM BDC_FIELD USING 'RF02K-KTOKK'
RECORD-KTOKK_002.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-TELX1'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'LFA1-ANRED'
RECORD-ANRED_003.
PERFORM BDC_FIELD USING 'LFA1-NAME1'
RECORD-NAME1_004.
PERFORM BDC_FIELD USING 'LFA1-SORTL'
RECORD-SORTL_005.
PERFORM BDC_FIELD USING 'LFA1-STRAS'
RECORD-STRAS_006.
PERFORM BDC_FIELD USING 'LFA1-PFACH'
RECORD-PFACH_007.
PERFORM BDC_FIELD USING 'LFA1-ORT01'
RECORD-ORT01_008.
PERFORM BDC_FIELD USING 'LFA1-ORT02'
RECORD-ORT02_009.
PERFORM BDC_FIELD USING 'LFA1-LAND1'
RECORD-LAND1_010.
PERFORM BDC_FIELD USING 'LFA1-REGIO'
RECORD-REGIO_011.
PERFORM BDC_FIELD USING 'LFA1-SPRAS'
RECORD-SPRAS_012.
PERFORM BDC_FIELD USING 'LFA1-TELF1'
RECORD-TELF1_013.
PERFORM BDC_FIELD USING 'LFA1-TELF2'
RECORD-TELF2_014.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=VW'.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=ENTR'.
PERFORM BDC_FIELD USING 'LFBK-BANKS(01)'
RECORD-BANKS_01_015.
PERFORM BDC_FIELD USING 'LFBK-BANKL(01)'
RECORD-BANKL_01_016.
PERFORM BDC_FIELD USING 'LFBK-BANKN(01)'
RECORD-BANKN_01_017.
PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=UPDA'.
PERFORM BDC_TRANSACTION USING 'XK01' CHANGING ERR RC.
DATA: SERIAL TYPE I VALUE 1.
IF RC <> 0.
FAILCOUNT = FAILCOUNT + 1.
CLEAR ERRORITAB.
ERRORITAB-SERIAL = SERIAL.
ERRORITAB-LIFNR_001 = RECORD-LIFNR_001.
ERRORITAB-KTOKK_002 = RECORD-KTOKK_002.
ERRORITAB-ANRED_003 = RECORD-ANRED_003.
ERRORITAB-NAME1_004 = RECORD-NAME1_004.
ERRORITAB-SORTL_005 = RECORD-SORTL_005.
ERRORITAB-STRAS_006 = RECORD-STRAS_006.
ERRORITAB-PFACH_007 = RECORD-PFACH_007.
ERRORITAB-ORT01_008 = RECORD-ORT01_008.
ERRORITAB-ORT02_009 = RECORD-ORT02_009.
ERRORITAB-LAND1_010 = RECORD-LAND1_010.
ERRORITAB-REGIO_011 = RECORD-REGIO_011.
ERRORITAB-SPRAS_012 = RECORD-SPRAS_012.
ERRORITAB-TELF1_013 = RECORD-TELF1_013.
ERRORITAB-TELF2_014 = RECORD-TELF2_014.
ERRORITAB-BANKS_01_015 = RECORD-BANKS_01_015.
ERRORITAB-BANKL_01_016 = RECORD-BANKL_01_016.
ERRORITAB-BANKN_01_017 = RECORD-BANKN_01_017.
ERRORITAB-ERRORMSG = ERR.
SERIAL = SERIAL + 1.
APPEND ERRORITAB.
MODIFY RECORD TRANSPORTING KTOKK_002.
DELETE RECORD WHERE KTOKK_002 = '0001'.
ELSE.
SUCCESSCNT = SUCCESSCNT + 1.
ENDIF.
ENDLOOP.
display output********************************************************
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records successfully uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: SUCCESSCNT.
Displaying the success table******************************************
IF SUCCESSCNT <> 0.
SKIP.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE:/ 'Successful Records'.
FORMAT COLOR 7 INTENSIFIED ON.
WRITE:/(261) SY-ULINE,
/ SY-VLINE,
'S.NO', 007 SY-VLINE,
'VENDOR ACC.NUM', 023 SY-VLINE,
'VENDOR ACC GROUP', 041 SY-VLINE,
'TITLE', 048 SY-VLINE,
'VENDOR NAME', 064 SY-VLINE,
'SORT FIELD', 076 SY-VLINE,
'HOUSE NO.& STREET', 101 SY-VLINE,
'PO.BOX NO', 116 SY-VLINE,
'CITY', 129 SY-VLINE,
'DISTRICT', 141 SY-VLINE,
'COUNTRY KEY', 156 SY-VLINE,
'REGION', 166 SY-VLINE,
'LANGUAGE KEY', 180 SY-VLINE,
'TELEPHONE NO 1', 196 SY-VLINE,
'TELEPHONE NO 2', 213 SY-VLINE,
'BANK COUNTRY KEY', 231 SY-VLINE,
'BANK KEY', 241 SY-VLINE,
'BANK ACC.NO', 261 SY-VLINE,
/1(261) SY-ULINE.
FORMAT COLOR 4 INTENSIFIED ON.
SERIAL = 1.
SORT RECORD BY LIFNR_001.
LOOP AT RECORD.
WRITE:/ SY-VLINE,
SERIAL LEFT-JUSTIFIED, 007 SY-VLINE,
RECORD-LIFNR_001(016), 023 SY-VLINE,
RECORD-KTOKK_002(004), 041 SY-VLINE,
RECORD-ANRED_003(015), 048 SY-VLINE,
RECORD-NAME1_004(035), 064 SY-VLINE,
RECORD-SORTL_005(010), 076 SY-VLINE,
RECORD-STRAS_006(035), 101 SY-VLINE,
RECORD-PFACH_007(010), 116 SY-VLINE,
RECORD-ORT01_008(035), 129 SY-VLINE,
RECORD-ORT02_009(035), 141 SY-VLINE,
RECORD-LAND1_010(003), 156 SY-VLINE,
RECORD-REGIO_011(003), 166 SY-VLINE,
RECORD-SPRAS_012(002), 180 SY-VLINE,
RECORD-TELF1_013(016), 196 SY-VLINE,
RECORD-TELF2_014(016), 213 SY-VLINE,
RECORD-BANKS_01_015(003), 231 SY-VLINE,
RECORD-BANKL_01_016(015), 241 SY-VLINE,
RECORD-BANKN_01_017(018), 261 SY-VLINE.
WRITE:/(261) SY-ULINE.
SERIAL = SERIAL + 1.
ENDLOOP.
WRITE:/1(261) SY-ULINE.
ENDIF.
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records not uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: FAILCOUNT.
*Displaying the error table
IF FAILCOUNT <> 0.
SKIP.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE:/(320) SY-ULINE,
'Error Records'.
FORMAT COLOR 7 INTENSIFIED ON.
WRITE:/ SY-ULINE, SY-VLINE,
'S.NO', 007 SY-VLINE,
'VENDOR ACC.NUM', 023 SY-VLINE,
'VENDOR ACC GROUP', 041 SY-VLINE,
'TITLE', 048 SY-VLINE,
'VENDOR NAME', 064 SY-VLINE,
'SORT FIELD', 076 SY-VLINE,
'HOUSE NO.& STREET', 101 SY-VLINE,
'PO.BOX NO', 116 SY-VLINE,
'CITY', 129 SY-VLINE,
'DISTRICT', 141 SY-VLINE,
'COUNTRY KEY', 156 SY-VLINE,
'REGION', 166 SY-VLINE,
'LANGUAGE KEY', 180 SY-VLINE,
'TELEPHONE NO 1', 196 SY-VLINE,
'TELEPHONE NO 2', 213 SY-VLINE,
'BANK COUNTRY KEY', 231 SY-VLINE,
'BANK KEY', 241 SY-VLINE,
'BANK ACC.NO', 261 SY-VLINE,
'ERROR MESSAGE', 320 SY-VLINE.
WRITE:/(320) SY-ULINE.
FORMAT COLOR 4 INTENSIFIED ON.
SORT ERRORITAB BY LIFNR_001.
LOOP AT ERRORITAB.
WRITE:/ SY-VLINE,
ERRORITAB-SERIAL LEFT-JUSTIFIED, 007 SY-VLINE,
ERRORITAB-LIFNR_001 , 023 SY-VLINE,
ERRORITAB-KTOKK_002, 041 SY-VLINE,
ERRORITAB-ANRED_003, 048 SY-VLINE,
ERRORITAB-NAME1_004, 064 SY-VLINE,
ERRORITAB-SORTL_005, 076 SY-VLINE,
ERRORITAB-STRAS_006, 101 SY-VLINE,
ERRORITAB-PFACH_007, 116 SY-VLINE,
ERRORITAB-ORT01_008, 129 SY-VLINE,
ERRORITAB-ORT02_009, 141 SY-VLINE,
ERRORITAB-LAND1_010, 156 SY-VLINE,
ERRORITAB-REGIO_011, 166 SY-VLINE,
ERRORITAB-SPRAS_012, 180 SY-VLINE,
ERRORITAB-TELF1_013, 196 SY-VLINE,
ERRORITAB-TELF2_014, 213 SY-VLINE,
ERRORITAB-BANKS_01_015, 231 SY-VLINE,
ERRORITAB-BANKL_01_016, 241 SY-VLINE,
ERRORITAB-BANKN_01_017, 261 SY-VLINE,
ERRORITAB-ERRORMSG, 320 SY-VLINE.
WRITE:/(320) SY-ULINE.
ENDLOOP.
WRITE:/ SY-ULINE.
ENDIF.
hope this ll help you..
regards,
prema.A -
What's the difference between Transferred Records and Added Records?
When right click an ODS or a cube to select Manage, then under the 3rd tab called Requests, there are two columns called Transferred Records and Added Records, what's the difference between these two?
ThanksHello KeLviN,
How r u ?
Consider a realtime example.
Assume a transfer of Transactional Data from R/3(with PSA) which is having Unit values in it.
Now, I found in RSA3 2844168 of records. In BW I saw one Data Packet with 306 error records(because of a UNIT value is not available in BW T006 table, Eg. YDD) which are automatically collected in PSA. Now in the Monitor screen you could see 2 Monitor status with GREEN Signals for 2 set of data.
1. with 2843862 records
2. with 306 records
Now, if u manage the Data Target you will get 2844168 in the Transferred Records & 2843862 in the Added Records. and the 306 error records are in the PSA.
Hope this is clear.
Best Regards....
Sankar Kumar
+91 98403 47141 -
'use dynamic name' and 'caching properites' options for alias table...
Hello everybody,
can anybody please explain 'use dynamic name' and 'caching properites' options for alias tables...
Thanks...
eagerly waiting for a response..
VijayYou want to create dynamic target table name right?
You can refresh a variable like #GET_SESSION
#GET_SESSION= SELECT <%=odiRef.getSession("SESS_NAME")%> FROM DUAL
My tmp table name like TMP_#GET_SESSION
then in your package refresh #GET_SESSION variable and you can use it.
I hope this can be helpful
Thanks -
Create users under Administration Server Create user and Refresh users options are disabled
We have installed and configured 11.1.2.2 successfully, Essbase in standalone mode.
When we try to create users under Administration Server Create user and Refresh users options are disabled. Please let me know how to create EAS users?
Thanks,
Satheesh.Please find below response.
1.You can create users from EAS console using maxl, if you have not externalized the users .
When we create using Maxl it will create for 'ESSBASE Servers' users but we want to create additional administrator users under 'Administrator Services' --> 'Users'. At the moment default 'Admin' users is created under 'Administrator Services' --> 'Users'.
2. you have installed your essbase in a stand -alone mode , then the option of creating users will be enabled and you can give appropriate provision to applications.
Yes. But the create users is disable for Admin.
3. Through which url are you accessing EAS console is it http://Servername:19000/workspace/index.jsp ?
http://prod-server:10080/easconsole/console.html
Please suggest. -
Manage ODS : Difference of Transferred Records and Added Records
Hi there,
When I click on Manage ODS , I have the following fields
Transferred Records and Added Records.
Please advice the differenceHi,
Transferred Record coloumn indicated how many records were tranferred from the source system to BW,means how many records were extracted at that point of time and another Column indicates that the total number of records added to your data target.these two cloumn vales may not be same for all the time,becoz if you have filters at the update rule level....in this case numbers records tranfered and numbers records added might be different.......
Transferred refers to the number of records that are transferred from the datasource (arrive in BW). Added is the number records inserted into the ODS. Both can be different numbers, like due to any processing of the data.
Added records refer to which is really inserted in ODS (your start routine, for example, can reduce the number of transferred records by deleting something!)
Ex
transferred records means the total records from source e.g ods. say data coming from ods
docnumber docitem customer qty
001 1 x 10
001 2 y 20
002 1 x 30 (3 records)
and your infocube has char customer and keyfigure qty, so
record added
customer qty
x 40
y 20 (2 records)
so here you have transferred records = 3 and added records = 2
Refer these posts:
Re: transferred records and added records
Re: Transfered and Added Records
Re: Clarification about ODS - Transferred & Added records
-Shreya -
I am unable to buy any of applications on App Store as it is not accepting any of cards and doesnot show option for credit card.
ThanksTry this to change your payment method: http://support.apple.com/kb/PH12507
-
Recently downloaded FLAC app. and want to stream 96/24 to my stereo system. Whats best wireless and hard wired option for a 30 foot run?
Try these 3 possible solutions:
1. Restart iPad
Hold down the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, hold down the Sleep/Wake until the Apple logo appears.
2. Close inactive Apps
Double-click the Home button; hold Apps down (in the Task Bar) for a second or two until you see the minus sign. Tap and close all inactive Apps.
3. Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Ignore the red slider. -
Added records and transferred records
What is the difference between "transferred records" and "added records" in Infocube-> manage->requests ??
KarthikHi Karthik,
You may have 2 records in the source data with same characteristic values. Then these two will be sumarized and added as a single record.
say suppose:
C01 M01 100 200
C01 M02 200 400
Now only one record is added to Infocube
C01 M01 300 600
-> When there are multiple records with in a same request with same characteristic combinations, They will be summarized while updated to Cube.
In the above case: No. transferred records = 2
No. Records Added = 1
In this kind of scenarios... Always No. transferred records will be more or equal to Added records.
Some scenarios like where You split records into multiple records using Time distribution or return table... Example: You have monthly revenues in a flat file. But you want to split them into weekly records(based on averege model) and load to Cube. In this kind of scenarios the Added records will be more that Transferred records.
So-> Dont expect the added records = Transferred records always.
Hope this helps.
Suman
Message was edited by: suman kumar
Message was edited by: suman kumar -
Whats the diff between Transfered Records and Added Records
Hi
whats the diff between Transfered Records and Added Records in any data target Request Tab.
Regards
llHi.......
Check this.......
What's the difference between Transferred Records and Added Records?
Manage ODS : Difference of Transferred Records and Added Records
Regards,
Debjani...... -
Transferred records and added records
in Cube manager, I see the number of transferred records and added records in each request are always different.
what's the exactly means of those two field ? I guess added records is record loaded into cube without any duplicated, right?Hi Jie,
Refer these links:
Re: difference i transfered records and added records
Re: manage infocube
Bye
Dinesh -
Select-options for date field.
Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS WDR_SELECT_OPTIONS
SELECT_OPTIONS WDR_SELECT_OPTIONS INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
lt_range_table TYPE REF TO DATA.
data:
lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
EXPORTING
I_TYPENAME = 'DATS'
RECEIVING
RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
EXPORTING
I_ID = '<name of date attribute in the context>'
* I_WITHIN_BLOCK = MC_ID_MAIN_BLOCK
* I_DESCRIPTION =
* I_IS_AUTO_DESCRIPTION = ABAP_TRUE
IT_RESULT = lt_range_table
* I_OBLIGATORY = ABAP_FALSE
* I_COMPLEX_RESTRICTIONS =
* I_USE_COMPLEX_RESTRICTION = ABAP_FALSE
* I_NO_COMPLEX_RESTRICTIONS = ABAP_FALSE
* I_VALUE_HELP_TYPE = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
* I_VALUE_HELP_ID =
* I_VALUE_HELP_MODE =
* I_VALUE_HELP_STRUCTURE =
* I_VALUE_HELP_STRUCTURE_FIELD =
* I_HELP_REQUEST_HANDLER =
* I_LOWER_CASE =
* I_MEMORY_ID =
* I_NO_EXTENSION = ABAP_FALSE
* I_NO_INTERVALS = ABAP_FALSE
* I_AS_CHECKBOX = ABAP_FALSE
* I_AS_DROPDOWN = ABAP_FALSE
* IT_VALUE_SET =
* I_READ_ONLY = ABAP_FALSE
* I_DONT_CARE_VALUE =
* I_EXPLANATION =
I_TOOLTIP = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
lt_date type REF TO DATA.
FIELD-SYMBOLS:
<fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
EXPORTING
I_ID = '<attrib_name>'
RECEIVING
RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.
Maybe you are looking for
-
Can't open more than one Macromedia product at a time
I haven't really used my Studio products much other that editing web pages. Well now, I'm working on a site that uses flash, but for some reason I can't have both Dreamweaver (MX 2004) and Flash open at the same time. If I try to open a secondary MX
-
In sharing , can't see facebook
hi İ can not see facebook on the Sharing option AND İ can not find it here İ picture it http://i45.tinypic.com/2nq79r6.png and here http://i48.tinypic.com/59y63a.png
-
I want to know how to upgrade HP EVA 6400 Storage Upgrade/ 3*Disk Enclosure/ 28*600GB 15K FC HDD and Memory upgrade on Existing X3800 Network Storage Systems.
-
Copy condition from sales order to invoice ?
Sorry for this very general question, but i need a starting point for my development. It is partly functional and partly technical. Data transfer or copy requirements are probably needed. The situation is : Sales order with a condition type and value
-
We purchased RoboHelp 7 on May 7, 2008, with order # AD001542272, less than a year ago. We bought RoboHelp because we wanted an easy to use HTML editor that: • Imports from Word • Creates .pdf files We found out the hard way that RoboHelp does not im