Missing address info

Downloaded the May 17 security update and found all my address contacts missing after restarting the computer. Have tried renaming the user/library/application support/addresses as in a couple of discussions, but to no avail. Any other ideas? I do have a back up in iDisk, but am nervous about bringing it over.
I'm about to give up on downloading security updates. Seems everytime one comes out, somethings goes whacko. Not only did it mess up my address contacts, but also messed up my printer, too.

got answer

Similar Messages

HT204150 Outlook contacts missing address info

Since I started using iCloud with MS Outlook 2010, I am having 2 specific problems:
1. Essential info in the address field is now missing from my outlook entries. I have over 2500 entries in my contacts list, so I am really unsure how many contacts are affected.
2. There are multiple entries created for some often used contacts
I am sure many others would have faced similar problems. Can anyone advise how to fix these issues.

Another issue is that the phone still has the info, but Outlook entry is missing it. If I add the missing info to the Outlook entry, it duplicates that info on the phone entry.
I spent a lot of time cleaning up some of the important contacts in Outlook (a few hundred of them), and now find that the phone entries are all messed up.
What to do???

Missing Contact Info

I've had my iPod touch for a few days now. Everything has seemed to sync perfectly. My bookmarks, calendars, and photos are all there. But there's a majority of my contacts who are missing their info. Even my own card is missing info from it. Can anyone help?

Hi there.
I've got the same problem. I first synced some groups but then decided to sync my entire address book. Now there are some contact with no information in them. When I complete the missing information on the iPod touch and sync back the entered info appears along the existing info in my mac's adress book.
Strange thing. I heard someone say that it might be a problem with the format of the vcards but that would be strange. Hopefully this will be solved soon.
Thomas.

TS2972 How can I change my HomeSharing email address info on my Apple TV?

How can I change my HomeSharing email address info on my Apple TV? I updated to a new email address through iTunes but now Apple TV won't recognize it and won't connect. Please help! Thanks.

This is the first time I have ever replied to a question on here but I actually know this because I just figured it out for myself.
On the apple tv go to settings>computers
Then turn off home sharing.
Now go back to the main menu and open computers.
When you do it will give the option to use the previous home sharing settings or to use a new apple id.

Return Order incomplete because of missing address indicator (VBPA-ADRDA)

Hello,
Using the VA02 to create a subsequent retun order results in a complete return order created. However, when I use BAPI BAPI_CUSTOMERRETURN_CREATE to create the return order, the incompletion log identifies a missing address indicator (VBPA-ADRDA) for the ship-to party. Both sold to and ship to party are defined as one time customers. Looking at the entries in table VBPA the problematic customer holds 'D' as the address indicator value while the other customer holds 'E' as the missing address value.
What could be the reason for the missing address indicator for that specific customer while creation works fine using the subsequent retun order creation?
Thanks in advance, Ziv.

1: You took care of the copy controls.
2: Whats the item category you are using in your return order. Please mark that item category as not relevant for pricing. Uncehck the pricing field in VOV7 for this item category. Also check the incompletion procedure to make sure "pricing" is not an entry.
3: Please check the pricing procedure you are using for the return order type, uncheck any "Mandatory " pricing conditions.
4: In the pricing procedure determination OVKK, please check you have the required entry for the return pricing procedure.
Please test with these changes and see the results,
Regards
Sai

Epson scanner error message: missing file info.plist

I've been wrestling with an epson scanner/printer I got free with my mbp a year ago. The printer worked fine, but every time I tried installing the scanner drivers, I was foiled by the error message "missing file: info.plist..." I was reduced to scanning on my sloooow dell desktop at work. After a few rounds with epson support, they suggested I install the drivers on a different user account on my computer. Problem solved! It works, even on the original user account.

I've been wrestling with an epson scanner/printer I got free with my mbp a year ago. The printer worked fine, but every time I tried installing the scanner drivers, I was foiled by the error message "missing file: info.plist..." I was reduced to scanning on my sloooow dell desktop at work. After a few rounds with epson support, they suggested I install the drivers on a different user account on my computer. Problem solved! It works, even on the original user account.

Missing Address Data

Recently when I search my address book most data is missing.. many contacts are missing and contacts there are missing address, etc.. if I quit both Mail and Address Book then reopen Address Book things are back to normal... how can I fix this?

I found a solution.
See my posting here:
http://discussions.apple.com/message.jspa?messageID=11380486#11380486

Missing types info in array manager?

I have a doubt regarding "Missing types" shown once in a while on the Array Manager in the emulator sessions.
I want to know wat exactly this means and how can we see wats missing
Any info is helpful.
Thanks and Regards

"Missing Types" should be a temporary state. It is the difference between webtop and emulator session counts and can occur while replication updates are being performed. If "shown once" then it is of no concern. If you see this consistently then it could mean that you have Security enabled and you need to tune the number of ttassl processes running.
http://docs.sun.com/source/820-1088/ssldaemon_tuning.html
regards,

Equipment change.. address info

Hi Experts,
I need to update address info(fields:NAME1,STREET,DISTRICT,POST_CODE1,CITY1
COUNTRY,REGION,TAXJURCODE,HERST,TYPBZ, on the equipment.) I Tried to use the below code and it does not wrk. I haven't used this fm before and can someone please let me know how to make it wrk.
FORM update_additional_fields USING    p_zinput_zserial
                                        p_zinput_matnr
                                        p_lt_gr_item LIKE lt_gr_item[].
DATA: wa_gr_item TYPE bapi2017_gm_item_create.
DATA: l_bednr TYPE ekpo-bednr.
data: l_adrnr TYPE lfa1-adrnr.
data: l_afnam TYPE ekpo-afnam.
data: l_equip type BAPI_ITOB_PARMS-EQUIPMENT.
data: ls_data_general type BAPI_ITOB.
data: ls_data_general_x type BAPI_ITOBX.
data: ls_DATA_SPECIFIC type BAPI_ITOB_EQ_ONLY.
data: ls_data_specific_x type BAPI_ITOB_EQ_ONLYX.
data: ls_data_general_exp type BAPI_ITOB.
data: it_Return_c type BAPIRET2.
LOOP AT p_lt_gr_item INTO wa_gr_item.
    select single equnr from equi into l_equip
                                      where sernr = p_zinput_zserial
                                          and matnr = p_zinput_matnr.
    if sy-subrc = 0.
    SELECT SINGLE bednr                                    " SIR 93298
                   adrnr
                   afnam                                    " SIR 93298
                   FROM ekpo
                    INTO (l_bednr, l_adrnr, l_afnam)
                    WHERE ebeln EQ wa_gr_item-po_number
                   AND   ebelp EQ wa_gr_item-po_item.
    IF sy-subrc EQ 0 AND l_adrnr IS NOT INITIAL.
     wa_objrecip-adrnr = l_adrnr.
       ls_data_General-READ_ADRNR = l_adrnr.
       ls_data_general_x-read_adrnr = 'X'.
       ls_data_specific-SERIALNO    = p_zinput_zserial.
       ls_data_specific_x-SERIALNO = 'X'.
       ls_data_specific-MATERIAL    = p_zinput_matnr.
       ls_data_specific_x-MATERIAL = 'X'.
    ELSE.
     SELECT SINGLE adrnr INTO l_adrnr
                   FROM t001w
                   WHERE werks EQ wa_gr_item-werks.
     IF sy-subrc EQ 0.
       wa_objrecip-adrnr = l_adrnr.
     ENDIF.
    ENDIF.
CALL FUNCTION 'BAPI_EQUI_CHANGE'
EXPORTING
    equipment               = l_equip
    data_general            = ls_data_general
    data_generalx           = ls_data_general_x
    data_specific           = ls_data_specific
    data_specificx          = ls_data_specific_x
DATA_FLEET              =
DATA_FLEETX             =
VALID_DATE              = SY-DATUM
VALID_TIME              = SY-UZEIT
IMPORTING
   DATA_GENERAL_EXP        = ls_data_general_exp
DATA_SPECIFIC_EXP       =
DATA_FLEET_EXP          =
   RETURN                  = it_return_c
commit work.
endif.
endloop.
ENDFORM.                    " update_additional_fields

Thank you ... I looked into the program RMEQUI65.. but the structures for BAPI_EQUI_CHANGE are populated using the following statements that I cannot understand
SWC_GET_ELEMENT CONTAINER 'DataGeneral' DATAGENERAL.
SWC_GET_ELEMENT CONTAINER 'DataGeneralx' DATAGENERALX.
SWC_GET_ELEMENT CONTAINER 'DataSpecific' DATASPECIFIC.
SWC_GET_ELEMENT CONTAINER 'DataSpecificx' DATASPECIFICX.
SWC_GET_ELEMENT CONTAINER 'ValidDate' VALIDDATE.
I need to update Address info.. am I in the right path ? I'm trying to populate READ_ADDNR (Address number) which I'm hoping will take care of updating the address info. Can someone pelase share their code with BAPI_EQUI_Change that will successfully update equipment info.
Thank you

Missing contact info for one of the users. Can't get it back

?missing contace info for one of the users. can't get it back?

On what Mac or iDevice, running what operating system?

Problems with iTunes 7.1.2 : Missing Contacts Info

Problems with iTunes 7.1.2 : Missing Contacts Info !
I synced my iPhone 5s (running v 7.1.1) to my late 2010 MacBook Pro 13" (OSX 10.9.4) using iTunes (can't remember exactly which version of iTunes, but whatever was the latest around the end of May 2014).
Subsequently, I upgraded my iPhone 5s to v 7.1.2 and also upgraded iTunes to 11.3.1 (2), then synced my 5s to my MacBook Pro.
Following this, on both my iPhone and on my Mac (I don't use iCloud), many of my Contact details had reverted to a much older version, and most of the information under the "notes" field in each contact was missing.
Is there a way to revert to the prior version of iTunes (7.1.1) or otherwise restore this missing information? There is critical information in my Contacts that has now ceased to exist!

Often in upgrading the OS, QT or FCP for some odd reason QT will get knocked slightly off kilter. Before doing the step back to 6.5.2, try a complete QT reinstall.
This is how:
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
FWIW, FCP4.5 can run without issue under 10.4.x and QT7, but it is VERY stable under 10.3.9 and QT6.5.2.
Good luck.
x

Checkstyle warning: Missing package-info.java file

Hi,
I'm getting a checkstyle warning for a simple class which looks like:
package tools.interprocess;
* Class for testing RMI.
* @author spinth
public final class RMITest {
     * Private constructor.
    private RMITest() {
     * Main method.
     * @param args User arguments
    public static void main(final String[] args) {
}The warning message says: Missing package-info.java file
I really couldn't figure out what this means and how I can fix it. Do I have to add something to the source tree?
I'm using Eclipse for development and Eclipse-cs as my checkstyle plug-in.
Thanks.
Edited by: spinth on Apr 15, 2010 12:37 PM

If you don't want that warning then simply turn it of.
A package-info.java file is there mostly to attach JavaDoc to the package itself.
If you don't need/want that, then the checkstyle warning is useless. Checkstyle (and similar tools) are meant to be tweaked to your needs and not used blindly.

Kinterbasdb AUR build missing package info file

Not sure what this means, but used the AUR PKGBUILD and the download didn't resolve, so manually copied the file to the directory from the project page. Package seemed to build ok but on installing it gave message ... load_pkg: missing package info file in kinterbasdb-3.2.src.tar.gz
Any help appreciated.

How stupid am I, build these packages all the time, hit the tab key and tried to add the wrong package.
Profound apologies for my stupidy and wasting your time - worked fine of course now.
My only excuse is of having just done a total system upgrade and being agitated that my postgresql won't start!!!!!!!!! and doing > 1 thing at the same time.
Thanks again.

CO24 missing parts info

Hi Gurus,
Is component ATP info in CO02 consisitent with missing parts info in CO24?
An order in status created but not released is ATP OK using CO02, but is reported as Parts Missing in CO24, what is the reason behind?
Thanks,
Dawson

Hi,
Check rule used for Availablity check in Order is diffrent from Missing Part List .
Missing Part List will use check rule from Plant Parameter (OPPQ) perhaps Order will use Check control (OPJK)
Use same Check rule for both of them.
Regards,
Velmurugan S

Missing tap info on itunes

missing tap info on itunes
please help me!!!!

Tap? What's that apart from a thing that water comes out of?

Missing address info

Similar Messages

Maybe you are looking for