Missing adjustments in Develop

The section below the histogram has suddenly disappeared so there are no sliders for exposure, clarity, mid-tones etc.
I've been using Lightroom 3 for a few days with no problems till now.

Click on the header entitled, "Basic".  If there isn't one, right-click on any of the other headers and enable basic.

Similar Messages

  • I have lost Basic adjustments in develop module LR5.6.  I would love to find them again

    My Basic adjustments have gone missing from the develop module of my lightroom 5.  I have just downloaded 5.6 and they are no longer with me in my favored form  Can I have suggestions please?

    control or right click on any of the section headers left of the text. You'll get a popup panel where you can select what you will see. Make sure there is a checkmark next to "Basic"

  • Missing adjustments in LR5

    Hi, I have upgraded from LR4 to LR5, but my adjustments from developer module, stars, keywords tag etc is missing.
    I think I moved the catalog from 4 to 5 instead og copied and do not know how to fix this problem.

    Here is the general method
    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
    You can apply this method to the "parent" folder that contains subfolders with your photos

  • For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

    For some reason the "Basic" tab is missing in my Develop folder when trying to edit using LR5..? Plz Help

    Right-click (Mac Cmd-click) on another panel header such as "Tone Curve". Make sure there is a checkmark for Basic as was all other panel sections that you want displayed.

  • Why is the "basic" edit option missing from the develop module?

    why is the "basic" edit option missing from the develop module?

    http://www.lightroomforums.net/showthread.php?19775-Missing-Panels-Modules

  • Relative Adjustments in Develop Module and Presets...

    Hi there,
    the new Lightroom 4 beta is great and has some really good improvements inside (e.g. the "new" shadows/highlight or the new possibilities in the adjustment brush).
    But what I really miss is the possibility to make relative adjustments in the Develop Module. Primary this is useful in presets to make steps of correction. I can do very limited relative adjustments for single parameters partially in the Library Module, but it goes not far enough and I can not save any preset from that or even combinations of adjustments.
    An Example:
    I have an image which is nearly perfect. All adjustments are almost done. Now, I want to give the image a +10 in Clarity or -3 in Brightness relative to all current adjustments. Those relative adjustments are perfectly to increase or decrease simple adjustments stepwise, but also really helpful for stepwise bringing in or out more complex adjustments.
    Another Example:
    I have an image with no corrections. No I can push Clarity, Shadows/Highlights, Saturation etc. from a preset which brings in more and more of a complex set of adjustments, which are just right for this type of image.
    I think, a small checkbox behind a slider would be perfect to set relative or absolute adjustments. This settings should be saved within a preset to make some/all adjustments relative to the exisiting ones, or - if deactivated - absolute adjustment, like in the current version of Lightroom.
    What do you think about that? It would be great to see that in future betas or the final Lightroom 4 product.

    If they've been discussed at length, I'm surprised not to see them. Much has been provided that I would have guessed has received less requests.
    And while I understand that Adobe might simply want feedback on what they have provided, what would be the best forum for letting them know what we feel has not yet been provided.

  • Visual Studio 2008 with BizTalk 2009 Missing Assembly Reference - Developing under Windows7

    I'm having a similar issue to this....> http://social.msdn.microsoft.com/Forums/en-US/2df94010-5755-4982-a02d-81f8feb51fda/visual-studio-2008-with-biztalk-2009-missing-assembly-reference?forum=biztalkgeneral
    Prior to going to Win7, I was developing on a Win-XP machine. I used to delete the generated code and have VS generate it again, but no luck. I get errors in the Build, similar to what shows in the Message Assignment shape in the orc. It's complaining about
    a missing part of a Multi-part message.  Oh, and the Multi-part message is a schema created in VS2005/BizTalk2006 R2, which was created on a separate Win-XP machine.
    Just wondering if anyone has come up with a fix to this? The previously documented entry did not seem to have a solution.
    Thanks.

    Jeff,
    Do you see your_orchestration.odx.cs ?
    If you do Can you try as following:
    1. Take backup of whole solution
    2. Delete all .cs files associated with biztalk artifacts, like odx.cs, xsd.cs, btm.cs
    3. Open orchestration and in any one of the expression shape copy all statements.
    4. Click OK to close the Expression window.
    5. Build the solution. (you should get errors)
    6. Goto expression and paste code.
    7. Build
    This has worked for me in past. May be it will work for you too.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

  • Missing controls in Develop module - crop etc

    They were there a couple of days ago but for the last few sessions the group of controls (including crop etc) that sit under the main image in the Develop module have gone missing.
    I've been playing with the 'view' options without success and it seems that they are not coming back of their own volition.
    Any help appreciated.
    Thanks
    Scott Hortop

    Thanks - I tried options on the view menu but missed the obvious one at the top.

  • Missing Tools in Developer Suite 9i

    I have been using Forms 6i and Reports 6i. I have also installed Developer Suite 9i and found that the following tools are missing?
    Schema Builder - Is it replaced by Designer's Server Model Diagrammer?
    Graophic Builder
    Procedure Builder
    Translation Builder - Is it the same as Forms Builder/Reports Builder's TranslationHub?
    Can anyone clarify these mappings of tools?

    Hi Freddy,
    I suggest you post this query to the Forms and Reports
    forums here on OTN. Subscribers to that list, including
    the Forms and Reports Product Managers, will be able to
    answer your questions fully.
    Designer's Server Modeler has always existed separately
    to any similar tools in Forms and Reports and has never
    actually replaced such tools.
    Secondly, yes, the translation functionality in Forms9i
    is called Oracle9i Forms TranslationHub.
    Hope this helps.
    Regards,
    Dominic
    Designer Product Management
    Oracle Corp.

  • Missing adjustments in aperture photos

    Photos in certain my albums/projects have lost all flags, adjustments and captions (but not keywords).  Others, including adjustments created earlier and later, are fine.  I tried rebuilding permissions but no success.  Help!!

    I'm not actually sure as I haen't used stacks (at least knowingly) - and I have a referenced library.  The point is, why can I see adjustments in otyher projects/albums and not these?  Wouldn't it be all or nothing?
    Thanks!

  • Exported images to external editor (Photoshop CS5) have missing adjustments

    Hi All
    Wonder if anyone knows the answer to this. Basically if I select a image that has Aperture adjustments applied to it and edit in external editor (in my case CS5) the image opens without the adjustments, however if I export the image say to the desktop then open them in CS5 it is fine. The adjustments I made in aperture are contrast, curve vibrancy etc and some brush adjustments. Also I have heard that the sharpening brush adjustment is not exported ? Running a iMac on 10.6.4 and Aperture 3.0.3
    Any help would be much appreciated.
    rgs
    Colin

    If I take an image with a large number of adjustments including all the ones you've listed above, multiple brushes etc. and click open in CS5, Aperture takes a reasonable while to process the image, creates a psd with all the adjustments applied and then opens the 16 bit 300 dpi psd file in photoshop. So what you are describing is not a universal bug as it's been working as it should every time on my machine.
    It may be a slight library corruption from your side.Your last description of long and short process times is telling. Have you done the basic checks? Rebuild database, check library permissions, ensure that the images in question on online if referenced etc?
    Fill us in a little bit more about your setup - can you tell a difference between the images it works on and those it doesn't (RAW or jpeg, what flavour of RAW, referenced or managed, same camera or different) - and we'll see if we can help you further.
    M.

  • Missing program in development...

    hi all...
    i face a weird problems in developing program...
    this morning i make a changes to my program and i save it in one request.. before i take a break i double checking the program whether i save it or not... the program already save and in the request...
    after break.. i try to open my program again but i got a message 'the program name does not exist'...
    how can i retrieve my program again...? the program name is still inda request but it state dat my program doesn't exist
    help me

    Hi,
    If u feel tht ur program is still in the same request then u can retriev them since u have not releaesed them . Got o Tcode :se09  check in the transport request whcih u were storing there u can retrive ur program. check this it might work.....
    Regards,
    Sana.
    Reward points for helpful answers!

  • BASIC pulldown missing from my DEVELOP screen. What to do?

    Can someone help? I am running LR5. Why is my Basic pulldown missing? How do I get it back? Thanks in advance!

    Right-click at the top header of any of the palettes (pull down menus) available, and then select Basic.
    Thanks,
    Sunil

  • Lens correction feature completely missing from Develop Module

    The lens correction feature has gone missing from the Development Module.  It was missing before I upgraded to 5.6 and is still missing.  Previously, it was present, so I am wondering if I did anything to hide or remove it?

    Right-click on one of the other section headings, such as Tone Curve, Basic, etc. Make sure there is a checkmark in lens corrections. This is how you control which develop features you want displayed on your system. Sometimes features disappear mysteriously.

  • Quick Develop Missing Saturation and Sharpen

    Does anyone know why Saturation and Sharpen is missing from Quick Develop, or how to get them back?
    Since Vibrance usually works on cools first, this is a terrible option for Portraits. Saturation does warm colors first, so it makes more sense. Vibrance makes the sky or water jump out before the flesh tones, so I am not just making it up. Seems like a silly thing to drop out.

    The Art of Retouching wrote:
    That key command changes..
    Yes, and in many, many other contexts as well - remember the Alt key! (especially useful when defining smart collections).

Maybe you are looking for

  • Radio button's click event to script both ".presence" and ".mandatory" -- Need help !

    Hi all, I've adopted the script stated in HightlightOneRequiredField.pdf so that the print button in my form can detect and prevent null field before pop up the print dialog. It works fine. In my form, I've created a mandatory 2-radio buttons group w

  • Cursor For loop question

    Hi, I have a cursor in my plsql and I am trying to get the record through a FOR loop. I know that for loop will take care of opening, fetching and closing the cursor implicitly. Ex. declare cursor c1 is select * from emp; begin for l_rec in c1 loop e

  • HT1535 I have a problem syncing my song into my ipad mini.

    Hi, I am facing a problem to sync my song into my ipad. after i click the sync button it process but doesn't copy my song into my ipad. i did the same on my ipod touch ,it's work. i wondering why it's failed on my ipad.

  • LOB question about performance, fragmentation etc.

    Well.. I want to discuss the issues around LOB objects. If I have an enttity class with n-count fields and then a lob as the n+1th field, does this affect performance in any way ? E.g. if performance is random access for an object without a lob, does

  • Archive not linking ;(

    hiya -- all of sudden during my last publish the 'see older posts' which is still linked to my archive doesn't work. when it publishes and you click on 'see older posts' it's a dead link. in iWeb i can see the entire archive.. though it is not publis