Missing amt.lib.dill

my adobe photoshop cs6 for 64x wont open. it says missing amt.lib.dill file. how do i fix this without having to re-buy the program bc i lost the disk. i already tried troubleshooting for working in earlier versions but that didnt work....i have windows
7.

MB
First I suspect the actual file is amt.lib.dll and that is a Photoshop dynamic link library. You will need to re-install PS.
Wanikiya and Dyami--Team Zigzag

Similar Messages

[SOLVED]Missing /usr/lib/libgssapi.so when using conserver client

With newly MIT krb5 in [Core] repo, everything I using console ( the client of conserver: http://aur.archlinux.org/packages.php?ID=27856), I got a compain about missing /usr/lib/libgssapi.so error.
I recompiled it, but not work.
Manaully create a link from /usr/lib/libgssapi_krb5.so will solve this problem.
But still confusing about why recompile the software don't goes to correct lib file.
Anyone can give me a clue?
Last edited by cathay4t (2011-05-12 11:23:49)

Where did you get that 0.1-4?
I get this error when starting cups
# /etc/rc.d/cups start
:: Starting CUPS Daemon [BUSY]
/usr/sbin/cupsd: error while loading shared libraries: libgssapi.so.2: cannot open shared object file: No such file or directory
[FAIL]
Last edited by markuman (2011-05-12 16:41:17)

Recently upgraded from 7.1.1 to LV2009 and noticed LV 2009 is missing \vi.lib\DAQmx\ !!!

I recently upgraded from LV7.1.1 to LV2009 and noticed LV 2009 is missing \vi.lib\DAQmx\. I tried to copy my DAQmx library over from LV7.1.1\vi.lib and did a mass compile of that directory but the compiled files have a bunch of screwed up connector sinks showing as "void".
Anyone have any suggestions how I can acheive a proper DAQmx library within LV2009? Does LV2009 not come with DAQmx support??!!??
Solved!
Go to Solution.

After you install LabVIEW (any version), you need to run the DAQmx installer to install support for it with LabVIEW. Even if you already had DAQmx installed, you still need to re-run the installer to install LabVIEW support.
Jarrod S.
National Instruments

Websharing (apache) error   missing /usr/lib/libpq.5.dylib

My webserver wouldn't start up under lion, it said I was 'missing' /usr/lib/libpq.5.dylib
I looked at my iMac mini server running lion and noticed that /usr/lib/libpq.5.dylib   was a symbolic link to /usr/lib/libpq.5.3.dylib
So, I did the following:
as root# cd /usr/lib
sh-3.2# ln -s libpq.5.3.dylib libpq.5.dylib
It's as happy as a clam..   so am I.

I'm having this problem too.
I upgraded from the mplayer-1.0pre8 version and upon installing mplayerOSX-1.0rc1 whenever I try to run any of my .avi files I get this:
2007-03-05 17:20:53.587 MPlayer OSX PPC[427] ===================== MPlayer OSX Started =====================
2007-03-05 17:20:54.118 MPlayer OSX PPC[427] User Default Deleted
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Path to MPlayer: /Applications/MPlayer OSX PPC.app/Contents/Resources/ExternalBinaries/mplayerppc.app/Contents/MacOS/mplayer
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: /Users/******/Movies/Random-File Name.avi
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: -identify
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: -frames
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: 0
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: -ao
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: null
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: -vo
2007-03-05 17:21:02.080 MPlayer OSX PPC[427] Arg: null
dyld: /Applications/MPlayer OSX PPC.app/Contents/Resources/ExternalBinaries/mplayerppc.app/Contents/MacOS/mplayer can't open library: /usr/lib/libncurses.5.4.dylib (No such file or directory, errno = 2)
2007-03-05 17:21:02.181 MPlayer OSX PPC[427] Abnormal playback error. mplayer returned error code: 5
I have no idea what any of this means. I get the same error after I download the Binary Codex for PowerPC and install that. I deleted all files in anyway related to mplayer, then reinstalled everything, and I get the same result. Any help would be most appreciated.
For all the problems I've been having I wish I hadn't upgraded. Can't seem to get the old version to work anymore either.

[solved] compiz-core upgrade issue: missing /usr/lib/compiz/libcore.so

After upgrading from compiz-core 0.8.8-3 to 0.8.8-4, but it's persisting even downgrading I got a segfault for the missing file.
Running
LANG=C xinit >xinit.log 2>xinit.log
with the following .xinitrc
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
setxkbmap it -option compose:rctrl -option terminate:ctrl_alt_bksp
urxvtd -f -o
fbpanel &
gtk-redshift &
compiz --debug --replace ccp --indirect-rendering
echo "ARGH -> $?"
I got this output in xinit.log
ARGH -> 139
rver 1.13.0
Release Date: 2012-09-05
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.6.0-1-ARCH x86_64.
Current Operating System: Linux archmini 3.6.2-1-ARCH #1 SMP PREEMPT Fri Oct 12 23:58:58 CEST 2012#
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7342087f-b1bb-4133-8b50-d25ff902fcab#
Build Date: 05 October 2012 01:57:18PM
Current version of pixman: 0.26.2
>...Before reporting problems, check http://wiki.x.org
>...to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
>...(++) from command line, (!!) notice, (II) informational,
>...(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 15 22:20:21 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
rxvt-unicode daemon listening on /home/milky/.urxvt/urxvtd-archmini.
compiz (core) - Debug: Could not stat() file /home/milky/.compiz/plugins/libcore.so : No such file#
compiz (core) - Debug: Could not stat() file /usr/lib/compiz/libcore.so : No such file or directory
/home/milky/.xinitrc: line 19: 858 Segmentation fault compiz --debug --replace ccp --indire#
xinit: connection to X server lost
^M
waiting for X server to shut down urxvt: X connection to ':0' broken, unable to recover, exiting.
Server terminated successfully (0). Closing log file.
Relevant pacman.log:
[2012-10-15 21:30] Running 'pacman -Syu'
[2012-10-15 21:30] synchronizing package lists
[2012-10-15 21:30] starting full system upgrade
[2012-10-15 21:40] upgraded acpid (2.0.17-1 -> 2.0.17-3)
[2012-10-15 21:40] upgraded cabal-install (1.16.0-1 -> 1.16.0-2)
[2012-10-15 21:40] upgraded chromium (22.0.1229.92-1 -> 22.0.1229.94-1)
[2012-10-15 21:40] upgraded libglapi (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded libgl (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] installed glu (9.0.0-1)
[2012-10-15 21:40] upgraded compiz-core (0.8.8-3 -> 0.8.8-4)
[2012-10-15 21:40] upgraded curl (7.27.0-1 -> 7.28.0-1)
[2012-10-15 21:40] upgraded dnsutils (9.9.1.P3-1 -> 9.9.2-1)
[2012-10-15 21:40] upgraded erlang (R15B01-1 -> R15B01-2)
[2012-10-15 21:40] upgraded firefox (15.0.1-1 -> 16.0.1-1)
[2012-10-15 21:40] upgraded firefox-i18n-it (15.0.1-1 -> 16.0.1-1)
[2012-10-15 21:40] upgraded freeglut (2.8.0-1 -> 2.8.0-2)
[2012-10-15 21:40] upgraded gegl (0.2.0-3 -> 0.2.0-4)
[2012-10-15 21:40] upgraded git (1.7.12.2-1 -> 1.7.12.3-1)
[2012-10-15 21:40] upgraded gnutls (3.1.2-1 -> 3.1.3-1)
[2012-10-15 21:40] upgraded gparted (0.13.1-1 -> 0.14.0-1)
[2012-10-15 21:40] upgraded hwids (20120922-1 -> 20121012-1)
[2012-10-15 21:40] upgraded intel-dri (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded jasper (1.900.1-7 -> 1.900.1-8)
[2012-10-15 21:40] upgraded khrplatform-devel (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded pam (1.1.5-4 -> 1.1.6-1)
[2012-10-15 21:40] upgraded util-linux (2.22-7 -> 2.22.1-1)
[2012-10-15 21:40] upgraded systemd (194-1 -> 194-3)
[2012-10-15 21:40] upgraded libgbm (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded libegl (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded libldap (2.4.32-1 -> 2.4.33-1)
[2012-10-15 21:40] >>> Updating module dependencies. Please wait ...
[2012-10-15 21:40] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-10-15 21:40] ==> Building image from preset: 'default'
[2012-10-15 21:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-10-15 21:40] ==> Starting build: 3.6.2-1-ARCH
[2012-10-15 21:40] -> Running build hook: [base]
[2012-10-15 21:40] -> Running build hook: [udev]
[2012-10-15 21:40] -> Running build hook: [autodetect]
[2012-10-15 21:40] -> Running build hook: [pata]
[2012-10-15 21:40] -> Running build hook: [scsi]
[2012-10-15 21:40] -> Running build hook: [sata]
[2012-10-15 21:40] -> Running build hook: [filesystems]
[2012-10-15 21:40] -> Running build hook: [usbinput]
[2012-10-15 21:40] -> Running build hook: [fsck]
[2012-10-15 21:40] ==> Generating module dependencies
[2012-10-15 21:40] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-10-15 21:40] ==> Image generation successful
[2012-10-15 21:40] ==> Building image from preset: 'fallback'
[2012-10-15 21:40] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-10-15 21:40] ==> Starting build: 3.6.2-1-ARCH
[2012-10-15 21:40] -> Running build hook: [base]
[2012-10-15 21:40] -> Running build hook: [udev]
[2012-10-15 21:40] -> Running build hook: [pata]
[2012-10-15 21:40] -> Running build hook: [scsi]
[2012-10-15 21:40] -> Running build hook: [sata]
[2012-10-15 21:40] -> Running build hook: [filesystems]
[2012-10-15 21:40] -> Running build hook: [usbinput]
[2012-10-15 21:40] -> Running build hook: [fsck]
[2012-10-15 21:40] ==> Generating module dependencies
[2012-10-15 21:40] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-10-15 21:40] ==> Image generation successful
[2012-10-15 21:40] upgraded linux (3.5.6-1 -> 3.6.2-1)
[2012-10-15 21:40] upgraded linux-headers (3.5.6-1 -> 3.6.2-1)
[2012-10-15 21:40] upgraded lirc-utils (1:0.9.0-30 -> 1:0.9.0-31)
[2012-10-15 21:40] upgraded mesa (8.0.4-3 -> 9.0-1)
[2012-10-15 21:40] upgraded mtdev (1.1.2-1 -> 1.1.3-1)
[2012-10-15 21:40] upgraded nodejs (0.8.11-1 -> 0.8.12-1)
[2012-10-15 21:40] upgraded subversion (1.7.6-1 -> 1.7.7-1)
[2012-10-15 21:40] upgraded sysvinit-tools (2.88-8 -> 2.88-9)
[2012-10-15 21:40] upgraded systemd-sysvcompat (194-1 -> 194-3)
[2012-10-15 21:40] upgraded thunderbird (15.0.1-1 -> 16.0.1-1)
[2012-10-15 21:40] upgraded tmux (1.6-2 -> 1.7-1)
[2012-10-15 21:40] upgraded wpa_supplicant (1.0-1 -> 1.0-2)
[2012-10-15 21:40] upgraded xf86-input-evdev (2.7.3-1 -> 2.7.3-2)
[2012-10-15 21:40] upgraded xf86-video-intel (2.20.9-1 -> 2.20.9-2)
[2012-10-15 21:40] upgraded xorg-server-common (1.12.4-1 -> 1.13.0-2)
[2012-10-15 21:40] upgraded xorg-server (1.12.4-1 -> 1.13.0-2)
[2012-10-15 21:40] upgraded youtube-dl (2012.09.27-1 -> 2012.10.09-1)
Anyone can help me tracing in which package the missing file is located (if it's not in compiz-core)?
Last edited by dexgeh (2012-10-16 17:58:39)

I managed to solve the issue commenting the --indirect-rendering flag and installing and launching driconf to create a default ~/.drirc file.
I just noticed that in the same upgrade I got intel-dri from 8.x to 9.x version, maybe it's related.
Launching a terminal in .xinitrc and manually launching
LIBGL_DEBUG=verbose compiz --debug --replace ccp
show me a lot of errors, but it's working, and I don't need anymore the --indirect-rendering flag (in the past I put that flag in the command because of the bad performance that compiz had without).

I can't compile mplayer and FVWM because of missing X11 libs

when I compile fvwm 2.5.16, I got this error:
In file included from ../libs/FImage.h:10,
from Graphics.c:34:
../libs/FShm.h:19:33: error: X11/extensions/XShm.h: No such file or directory
In file included from ../libs/FImage.h:10,
from Graphics.c:34:
../libs/FShm.h:31: error: syntax error before 'FShmSeg'
../libs/FShm.h:31: warning: data definition has no type or storage class
../libs/FShm.h:32: error: syntax error before 'FShmSegmentInfo'
And when I compile mplayer in the newest abs tree:
$makepkg
Checking for X11 headers presence ... not found (check if the dev(el) packages are installed)
Checking for X11 libs presence ... yes (using /usr/lib)
Checking for X11 ... no
Error: X11 support required for GUI compilation
Check "configure.log" if you do not understand why it failed.
Makefile:7: config.mak: No such file or directory
make: *** No rule to make target `config.mak'. Stop.
==> ERROR: Build Failed. Aborting...
It seems to miss one or more x11-libs,but
$ pacman -Q |grep libx
libx11 1.0.0-1
libxau 1.0.0-1
libxaw 1.0.1-1
libxcomposite 0.2.2.2-1
libxcursor 1.1.5.2-1
libxdamage 1.0.2.2-1
libxdmcp 1.0.0-1
libxevie 1.0.0-1
libxext 1.0.0-1
libxfce4mcs 4.2.3-1
libxfce4util 4.2.3.2-1
libxfcegui4 4.2.3-1
libxfixes 3.0.1.2-1
libxfont 1.0.0-1
libxfontcache 1.0.1-1
libxft 2.1.8.2-1
libxi 1.0.0-1
libxinerama 1.0.0-1
libxkbfile 1.0.2-1
libxkbui 1.0.1-1
libxklavier 2.1-2
libxml2 2.6.23-1
libxmu 1.0.0-1
libxp 1.0.0-1
libxpm 3.5.4.2-1
libxprintapputil 1.0.1-1
libxprintutil 1.0.1-1
libxrandr 1.1.0.2-1
libxrender 0.9.0.2-1
libxres 1.0.0-1
libxslt 1.1.15-1
libxss 1.0.1-1
libxt 1.0.0-3
libxtrap 1.0.0-1
libxtst 1.0.1-1
libxv 1.0.1-1
libxvmc 1.0.1-1
libxxf86dga 1.0.0-1
libxxf86misc 1.0.0-1
libxxf86vm 1.0.0-1
PLEASE, tell me, what should I do? :?:

You're welcome , plz mark it as solved

Missing vi.lib files in Run-Time LabVIEW 2012

Hi
I've got a problem executing VI's under RT in LabVIEW 2012.
Our system consist of multiple independent modules which are opened and run from a Manager VI. VI paths to the modules are read from an .ini file by the Manager VI.
We have build a single executable (RT Launcher) that takes the path of the Manager VI as argument (Attachment : RT Launcher.png).
The RT Launcher is placed in the ..\National Instruments\LabVIEW 2012 folder as the LabVIEW.exe.
The RT Launcher is called from the CLI.
"C:\Program Files\National Instruments\LabVIEW 2012\RT Launcher.exe" "C:\Workspace\Labview\Manager.vi"
This will run the Manager.vi in the RunTime Environment and the Manager.vi will open the .ini file and execute the Module VI's one by one.
By calling the RT Launcher.exe from the same folder as the LabVIEW.exe, the search paths should be the same.
The system worked fine in LabVIEW 2010.
The Manager VI is opened with broken arrow and the errors indicate that vi.lib sub VIs are missing (attachment : Manager VI errors.png)
I know there are issues regarding object cache and separated compiled code from LV2010 -> LV2011 -> LV2012, but simply can't figure out how to come around this problem.
Can anyone explain the difference and how to solve the problem ?
Thanks
Regards Kahr
Certified LabVIEW Architect
CIM A/S
Solved!
Go to Solution.
Attachments:
RT Launcher.png ‏68 KB
Manager VI errors.png ‏35 KB

Hi Kahr.
It sounds like you are making some dynamic calls to VI's, eg. by using 'Open VI Reference'. My answer is based on that assumption.
You are absolutely right. In LabVIEW2010 we introduced a function called 'Separating Compiled Code from VI'. At that time none of the VIs from VI.lib had that option enabled. In LabVIEW2011, many VI's in VI.lib have, by default, a separation of compiled code and VI. This option cannot be changed (greyed out) for these VI's as well. This feature was introduced in order to simplify source code control.
Separating Compiled Code from VIs and Other File Types
The drawback is, that it is no longer possible to call VI's dynamically from an application (executable), when this option in enabled, since the compiled code no longer exists. The method of calling a VI dynamically from an application has been (and still is) used to make some kind of a plug-and-play architecture, meaning we have one EXE-file that only gets distributed once and a set of subVI's that gets redistributed according to new versions (new features added to the subVI), meaning we can make changes in the subVI without having to redistribute the EXE-file.
With the release of LabVIEW2011 and LabVIEW2012 we can no longer distribute VI's that uses functions from vi.lib, this also include DAQmx calls even though the DAQmx driver is installed.
The simple explaining is, that it has never been intended that VI's got distributed. Eg, when Microsoft is making a new software update for Windows7, they don't send out the source code to all the users.
The solution is therefore to wrap up the source code into 'something' that includes all the compiled files. In LabVIEW we do that in a couple of different ways.
1) Include the VI's in the EXE-file.
When building the application, we have the option to include files, that normally is not included in builds. If we call a SubVI dynamically this will not automatically be included! However, the drawback of this method is, that if you need to change something in one of your SubVI's, you would need to build and distribute the entire application. Thereby, we are not making use of the plug-and-play architecture that we originally wanted. However, this method will fix the error.
Error 1003 When Using VI Server in a LabVIEW Application
2) Now, if we still want the plug-and-play architecture in LabVIEW2011+2012 (and this will properly be the same for the next many released of LabVIEW), this can still easily be achieved by making a Source Distribution. When we make a Source Distribution, we can include the VI's from VI.lib and thereby the compiled code. When using this method, two important things should be remembered:
a) Make the files into a LLB file. This will pack all the VI's into one single file, that is easy to distribute.
Go to Destinations ==> Destination Type ==> LLB.
b) Make sure not to 'Exclude files from vi.lib', as this method will then simply not work.
Go to Additional Exclusions ==> Remove checker mark in 'Exclude files from vi.lib'.
How Can I Call a VI Dynamically from an Executable Without Including Those VIs in the Build?
I have made a small example to demonstrate this:
Example: Using vi.lib
This example has two mainVIs and two EXE-applications. Build the two EXE-files, but do NOT build the source distribution yet.
1) Main(IncludeSubInExE). This version has included the subVI in the build distribution for the EXE-file. When running this EXE everything works fine, even when calling the subVI dynamically. However, since the subVI is build into the exe, we would have to redistribute the exe for every new version of the subVI. This breaks the hole idea.
2) Main. The subVI is no longer included in the build. When running and trying to call the subVI, you will get this error (on both your developer and run-time machine):
Now, build the Source Distribution and run this EXE again. The exe is running perfectly with no errors.
I hope this answers your question.
Best Regards
Alex E. Petersen
Certified LabVIEW Developer (CLD)
Application Engineer
Image House PantoInspect
Attachments:
Using vi.lib.zip ‏83 KB

Missing /usr/lib/ what can I do??!

Don't tell me how,But I accidentally deleted the /usr/lib/ folder...now every command I run obviously fails because some lib is missing...Is there a way I can recover the lib folder? apart reinstalling linux -.-

Apart from restoring your backup, obviously, you could try booting from an Arch install disc/usb and using the --dbpath and --root options of pacman to reinstall all the packages you've got in /var/cache/pacman/pkg/.
Edit: I've never done that. And you could also try some undelete utility, of course.
Last edited by stqn (2011-04-20 14:10:44)

Keymap missing from /lib/initcpio/hooks/

I was attempting to upgrade my kernel to 2.6.25-rc7, and I dscovered that
/lib/initcpio/hooks/keymap
and
/lib/initcpio/install/keymap
are missing...obviously, I couldn't parse the keymap hook. Eh, I looked around the forums, and even google, and there doesn't seem to be any info on how to deal with it.
Last edited by ph0tios (2008-03-28 16:20:23)

Well, the problem is...keymap isn't there...period.
Edit: I believe I fixed it by reinstalling klibc-kbd
Last edited by ph0tios (2008-03-28 16:49:51)

Missing shared lib nldapj8.so

after install 8i1.7 on linux, I am missing a shared lib, which prevents me from running any apps?!?!?

Thanks for your hint, which gave me the clue. Indeed, I
confused the 1 by l - thus I didn't find the lib (should have
pasted the truss output, stupid g) .
Now, I added the LD_LIBRARY_PATH and it works,
thanks.

Missing vi.lib files

Hello,
I am using the motion assistant with labview 2013 and NI motion driver 8.1. I followed the first tutorial to create my first project (using the virtual friver). But when genrating a labview code, I could not execute the VI was created since there are plenty of messing VI's from the vi.lib such as :
-Configure vector space.flx,
-load velocity.flx
-loaad acceleration/deceleration.flx,
-load s-curve time.flx,
-set operation mode.flx
-load vector space position.flx
-start motion.flx
-chek move compleate status.flx
-read per axis status.flx
-Motion error handler.flx
Can you please help me figuring out what the problem is? THank you very much for your help and have a nice day.

Have you included the LV2013 support when installing the motion driver ?
If you have installed the motion driver before LV, it was not included by default.
As a first step, I would reinstall the motion driver and check if this feature is activated.

Missing orasql9.lib in Windows ???

Has anyone downloaded and installed Oracle 9i Release 9.2 Standard and attempted to compile and link a Pro*C program in Windows?
I'm not finding orasql9.lib in the precomp\lib\msvcc directory as is documented. It's supposed to be there, but it's not!
Help please.

My 9.2 client env has orasql9.lib in ${ORACLE_HOME}\precomp\lib and ${ORACLE_HOME}\precomp\lib\msvc.
I installed mine as a client install from a server disk set.
Good luck.

Native Compiled PL/SQL - Missing ORAPLS9.LIB (9i Release 2)

In configuring the Natively Compiled PL/SQL feature of Oracle 9i, the library file ORAPLS9.LIB file can't be found. I tried generating it with:
LIB /DEF:ORAPLS9.DLL
but got the following warnings which didn't quite look right, and the resultant orapls9.lib file is rather small and doesn't work (unresolved externals).
Is the ORAPLS9.LIB file supposed to be installed with 9i Release 2 for Windows 2000, or am I generating it incorrectly?
BTW, the snpc_makefile.mk file is installed with 9i Release 2 for Windows, but not with 9i Release 1 for Windows.
Thanks,
Kevin Runner
[email protected]
Runner Technologies, Inc.
561-395-9322
OUTPUT
E:\oracle\ora92\bin>lib /def:orapls9.dll
Microsoft (R) Library Manager Version 6.00.8447
Copyright (C) Microsoft Corp 1992-1998. All rights reserved.
LIB : warning LNK4068: /MACHINE not specified; defaulting to IX86
orapls9.dll : warning LNK4017: MZI statement not supported for the target platform; ignored
orapls9.dll : warning LNK4017: $ statement not supported for the target platform; ignored
orapls9.dll : warning LNK4017: &&`j statement not supported for the target platform; ignored
orapls9.dll : warning LNK4017: -? statement not supported for the target platform; ignored
orapls9.dll : warning LNK4017: &E► statement not supported for the target platform; ignored
orapls9.dll : warning LNK4017: -jF◄oC♦♥-^kC♦[os]+IIIIIIIIIIIUo8b8↑oM6SVoG7 Wu♣o~Hd6weI statement not supported for the target platfo
rm; ignored
orapls9.dll : warning LNK4017: jK◄[]IIIIIIIIUo8So]♀VWoC♦o‼o+-?♥t statement not supported for the target platform; ignored
Creating library orapls9.lib and object orapls9.exp

Have you managed to resolve this problem?
I'm having exactly the same experience (it's very frustrating, as I'm trying to run a benchmark at the moment).
Hope to hear.
Regards,
T.
Message was edited by:
terenceo

Missing lvapp.lib

Hello 2 all !
I'm using LabView 8.5.1 on Windows XP SP2 and i'm trying to buid a executable based on a working vi.
But the build fails because, and i quote:
"Error copying files.
Source: D:\Program Files\National Instruments\LabVIEW 8.5\AppLibs\lvapp.lib
Destination: C:\Documents and Settings\Administrator\Local Settings\Temp\lvapp.lib.tmp"
" Error 7 occurred at AB_Engine_Get_AppShell.vi -> AB_EXE.lvclass:Build.vi -> AB_Engine_Build.vi -> AB_Build_Invoke.vi -> AB_Build_Invoke.vi.ProxyCaller
"Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer. "
How can i solve this ?
Thank you 4 your time.

I've searched tryed the following things :
1. Repair LabView - no luck.
2.Search my computer for lvapp.lib - no file found.
I've searche the forums, and came across http://zone.ni.com/devzone/cda/tut/p/id/6449#65891_by_Category.
This error should have been corrected in LAbView 8.5.1.
What else can i try ?

Missing shared lib libsall.so

The library above seems to be required when starting Star
Office 5.2 . It is not on my system. Where does that lib
belong to and how to obtain it?
thx for any help

Thanks for your hint, which gave me the clue. Indeed, I
confused the 1 by l - thus I didn't find the lib (should have
pasted the truss output, stupid g) .
Now, I added the LD_LIBRARY_PATH and it works,
thanks.

Missing amt.lib.dill

Similar Messages

Maybe you are looking for