Missing any Reverse details for new Primary Zone

Evening,
Following a successful install and update, I set about configuring DNS for local functionality as per numerous Leopard Server installations.
Please note no network cable was attached during install and no network details were configured during install.
While configuring the initial Primary Zone I noticed no Reverse Pointer setting and therefore no ns IP to input.
Is this simply an install problem or am I missing something? I've followed the excellent advise of Antonio Rocca (http://discussions.apple.com/thread.jspa?threadID=1251475&tstart=0)for all my DNS issues in the past, but I'll admit I'm initially a bit thrown.
Thanks
Steve

It seems, unlike 10.5 the server could not be installed without an 'active' ethernet connection providing basic DHCP information.
This enabled DNS to be autoconfigured during the set up and provided the previously missing ability to edit the server IP. We did use an already fixed address from the other DHCP source on the network and the address was 'manually' configured in System Preferences.
The DNS service was then already running when Server Admin was started.
Onward.

Similar Messages

Not getting any sound alerts for new mail, key lock etc

I'm not geeting any sound alerts for new email, sent mail, clender alerts etc for my iphone 4. Though all my alerts are on. Also I can't hear the incoming call but the speaker works. I've already upgraded to latest 4.3.3 Any help appriciated.

Did all that...talked to Apple 5 hours and I did everything they said..they don't kno what the problem is

Any Video strategy for new iPad?

I know the video for iPad shhould be a mp4 file, coding by H.264.
As the new iPad features a retina display, it requires higher resolution video.
Is there anyone has any idea about what the best setting when I try to compress the video for new iPad?
Quanlity vs File size ( resolution, bitrate, and any other thing?)

Thanks to Bob.
I also read something like this:
iPad3 supports a maximum video dimension of 1920×1080 which is likely more resolution than you really need on iPad3.
It seems that the resolutioin/deimension is not the most important thing.
How about the bitrate for iPad 3? Anyone has any experiences about it?

Log on Details for new client

hi experts,
I created the client 820 by using scc4 how can i create the password for that client to log in .
please give me solution asap.
Thanks ,
K.Rajesh.

Rajesh,
i would suggest you please close this thread and open new one in Basis forum am sure you will get better and good reply there.
its an ABAP section.
Amit.

Are we missing any Management Packs for newly installed services/applications

Hello!
Would it be possible to get a report or alarm when new server roles, services, applications etc. are installed on the monitored Windows Servers in SCOM 2012 SP1, but there are no Management Packs installed to monitor the new services?
For example on a newly provisioned Windows Server, the customer installs SQL 2008, but we don’t have the SQL 2008 SCOM Management Pack. How can we get a notification that we have a new Service installed there but no MP to monitor it.
Best Regards,
Mario Patov
Mario Patov

Hi,
Based on my knowledge, it’s a little difficult.
I recommend you use SCOM to monitor a txt which create by sc query command.
For more information, please review the link below:
Sc query
http://technet.microsoft.com/en-US/library/dd228922.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Missing SOA record for AD integrated zone

We are in the process of updating our Domain Controllers. We have 3 (now 2) Domain Controllers running server 2008 and 3 new Domain Controllers running Server 2012 R2. In DNS, we have 3 AD integrated zones. 1 of the zones is missing the SOA record on all
3 new DCs.
Before the record went missing, I first noticed an issue when attempting to demote one of the Server 2008 DCs. I had received the following warning:
"This Active Directory domain controller appears to be the last DNS server for the following Active Directory-integrated zones:
zonename If you demote this domain controller, you may be unable to resolve any DNS names in these zones."
I found a TechNet article with someone in the same boat, and the solution was basically to ignore the warning.
Well I checked out the zone in question, and noticed that the SOA record on the 3 new DCs had an old version/serial number (25 on the new DCs, 126 on the old DCs). This is a zone that rarely gets touched. I did an increment serial number on one
of the old DCs and they were then all showing version 127 for their SOA record, so the replication was working. The other odd thing about the SOA record is that on the OLD DCs, the record pointed to themselves, like they should. But on the new
DCs, the SOA record pointed to other DCs, which they shouldn't be doing. Well, whatever, I went ahead and completed demoting the 2008 DC I was working on.
After demotion completed, I attempted to fix the messed up SOA record on the new DCs. First I tried changing the replication scope from all DNS servers on DCs in the domain to all DCs (Win 2000 compatible). This didn't do anything for the SOA
record. For my next attempt, I took one of the old DCs and removed the problem zone from AD, making it a standard primary zone. Then I removed the AD-integrated version of the zone from another DC and waited for the zone removal to replicate.
So now the only copy of the zone is a standard primary on 1 DC. Then I switched the zone to AD integrated and waited for replication. Sure enough the zone appeared on all DCs. However, now on the 3 new DCs, the zone in question is now missing
the SOA record entirely. On the old DCs, the SOA record looks fine. When I open the zone properties on one of the new DCs and select the SOA tab, it just says "The data is not available."
So there we go. 3 DCs missing their SOA record for an AD integrated zone. Any suggestions?

Well I found the source of the problem. The zone giving me trouble has a CNAME record that's the same name as the zone itself. For example, for the zone testZone.local there is a CNAME record called testZone.local that points to www.testZone.local.
That way if someone types testZone.local into their browser, they end up at www.testZone.local. After some research, I discovered that CNAME records cannot share the same name as any other record. In my example, the CNAME record has the same
name as the SOA and NS records in the zone. Although many DNS servers allow this practice, it is not a valid DNS configuration.
While this setup worked fine in our Server 2008 environment, it definitely causes problems in Server 2012 R2. Somewhere between those 2 versions, Microsoft changed their DNS implementation. So to avoid any issues with our zone, we just need to
configure it correctly!

Hi All,How2 delete a pkey for std table and add 2 new primary keys

Hi All,
How2 delete a pkey for std table and add 2 new primary key fields .Please provide me the required procedure .
Thanks&Regards.
Bharat.

Hi Bharat,
First thing is you need to have the access key to change any standard dictionary object/standard programs/ standard transactions.You may get this from your basis person after getting approval from your respective manager.But changing or modifying the standard object is not recommended, but if there is no alternate to meet the business requirement then we have to follow this way only.
Next, you need to check whether this table's primary key is being used in any other table as foreing key or not. If there is, then you must remove this relation and then you can delete the unncessary primary key field from that table.Finally you can add the two new fields and set them as primary key, save, check for any errors and activate.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

HT201342 Are there any setting or some way to show notifications for new email without open Apple Mail app ?

Are there any setting or some way to show notifications for new email without open Apple Mail app ?
You know , I am an OCD . I alway's close my Mail app and miss many important new emails .

What I do is open the Mail.app, then click the red traffic light (upper left corner of the main Mail.app window) to close that window. The app itself will remain running and you will get updates - this helps keep the desktop tidy while while the mail app remains running. When an update is received, simply click the either the mail icon in your dock or go to the Mail.app menu and click Window > Message Viewer.

I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.

I want to know that if i want to download facebook on my iphone 4 or any other apps then it ask me put my card details for payment. why is that. if they are free then why do i need to give my card details?please help me anyone.

Just select no credit card as outlined here:
http://support.apple.com/kb/ht2534

Don't have money for new tech or headphones. I want to watch a movie from my laptop via AirPlay (watch a movie straight from Apple TV), but hear the sound on my headphones attached to my MB Air. Is there any way to do this??

I don't have money for new tech or headphones. I want to watch a movie from my laptop via AirPlay (watch a movie straight from Apple TV), but hear the sound on my headphones attached to my MB Air.
Is there any way to do this??
http://superuser.com/questions/853821/watch-a-movie-straight-from-apple-tv-but-h ear-the-sound-on-my-headphones-on-my

Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul

Please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

please , help me for apple id....... i made new id but there is a credite card option and that's why i am not able to download any free application for iphone,.....so,.....what i do about this problem..???

You can create an Apple ID without a credit card by following this guide exactly: http://support.apple.com/kb/ht2534. Note that you have to start by downloading a free app, then create the ID.

Any Function Module For getting Shipment Details

Hi All,
I want to get all details of shipment. i tired , but unable to get any function? I was able to find the creation or change shipment function modules, but not able to find the function module for getting the details for Shipment.
like BAPI_SHIPMENT_CHANGE Change Shipment
BAPI_SHIPMENT_CREATE Create Shipment
similary
Do you have any idea for getting (display)the details of Shipments?
Regards,
Raju

hi,
you can use
VTTP,VTTK
or
RV_SHIPMENT_READ

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Since updating to Mavericks, Mail doesn't work properly. It just stops working (no error messages--it just won't check for new mail) and I must shut it down and reopen it to get it working again. Any suggestions?

Try to force quit the mail app
Double tap the home button. When you see the app previews on the screen scroll sideways if needed to get the preview in question on the screen. Flick that preview up and off the screen to close the app. Single tap the home button or home screen preview to exit the mode.
Failing that, go into the settings, mail, contacts and calendars and remove your account info then put it back in and see if that works

Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement.

Hi all, Please suggest a case where there is a requirement for new SOAP sender adapter module. I wanted to develop a module but in my current project i am unable to find any such requirement. So please give me inputs for the same..
Thank you,
Vinay Kumar A

You can try converting a synchrnous soap call to asynchronous using a custom module
Here your module will send a response back to the sender system and make an asynchronous call forward

I have a iPod clsic load it with the music I like. I want to sync all my iPod music with the iTunes library (new) without missing any music from my iPod. How I do that?

I have a iPod clsic load it with the music I like. I want to sync all my iPod music with the iTunes library (new) without missing any music from my iPod. How I do that?

you have to pay to get a program like CopyTrans here is the link: http://www.copytrans.net/download.php

Missing any Reverse details for new Primary Zone

Similar Messages

Maybe you are looking for