Missing Apple ID

I restored my Iphone 5 recently by mistake and now i cannot use it anymore.
They are asking me for the Apple ID and password that i used when i seted up the phone.
I forgot it and i don't remember it anymore.
I have a new Apple ID and password that i am using on My Ipad and Imac but it does not work here.
any suggestions?
thx

You MUST use the ID that was used to activate Find my iPhone on the device.
If you don't remember what it was, you can recover it at https://iforgot.apple.com/appleid
If you can't recover it there, you will need to contact AppleCare and speak to someone in account security.

Similar Messages

I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver.

I upgraded Windows 7 to Windows 8 with iTunes installed. Now my iPhone 4S is no longer recognized in iTunes. Connecting the iPhone with USB sends me directly to the MS app that downloads pictures from the iPhone. Suggest this is a question of missing Apple driver for Windows 8, iTunes and iPhone. MS does not care! This seems to be a general problem with Windows 8 that a number of drivers that used to work with Windows 7 now do not work, ie. iPhone to iTunes, HTC to HTCSync, Samsung to Kies etc. I need this connection to work in order to syncronize with Outlook and my iTunes library.

diesel vdub wrote:
Maybe it would have been a better idea to confirm that iTunes is supported in Windows 8 before buying a computer with that Operating System.
There will be a new version of iTunes released this month... no one forced you to upgrade prior to a supported version of iTunes being released.
Like the fact that you just called most of us stupid there

After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong?

After my successful download of iTunes 64 bit,I continue to get an error message that it's missing Apple Application Support. What am I doing wrong? I've installed it and uninstalled it several times already, but each time I get that error message...

I've been getting timed out for 2 days now, what finally worked for me was not plugging the phone into the computer and just doing the update through my wifi, worked perfectly, took less than 15 minutes

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

I can't download itunes. It says I am missing apple support. What do I need to do?

When I go to download ITunes to my PC running Windows 8 it gets all the way to the end and says I am missing Apple support. I must re-install and install again. I have done this and still no luck. I have also tried installing through Firefox and it didn't work.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the above steps haven't helped try installing:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for a 32-bit core program, similar to previous 64-bit releases of iTunes, or roll back to:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
as appropriate.
tt2

[Missing] Apple FireWire Pal

"FCP can't find the missing Apple firewire Pal driver, reinstall Quicktime 7"
Is this true?or is there any other solution?

Yes... unfortunatly that is probably the problem. A few weeks ago (or months! i can't remember... time flies when you're having fun!) there was a surge of panic as everyone experienced connection issues after upgrading QT.
You also have to trash quicktime receipts. If you do a search on this forum about the topic i'm sure you will find everything you need to know in detail.
Good luck.

[missing] Apple FireWire DV NTSC

this is strange. I opened final cut to start capturing today and I couldn't capture anything from my camera. I've been able to do it before so I know it isn't the camera. Any ideas? When I go into my A/V settings it shows that the video playback is set to "[missing] Apple FireWire NTSC." Everything else is set up for Apple FireWire, the only one that says missing is video playback. I tried deleting my preference files and that didn't solve the problem, I've tried restarting and that didn't solve it. Any ideas?

First... can you open iMovie and check to see that it sees it there?
If not...
Shut down the computer unplug everything have a beer and then fire it back up after 20 minutes. (Often called the Guinness Solution)
Work?
No -- do this: http://docs.info.apple.com/article.html?artnum=301852
Good luck,
CaptM

Mail missing apple push notification service

After Software update on 03/20/2012 Apple Mail Application will not open. Error message missing apple push notification service ect...

Greetings Prem garigapati,
I understand you are receiving a message regarding an expiring certificate. Are you using a version of OS X Server on your computer? This article has additional information which may be helpful:
OS X Server: How to renew expired push certificates - Apple Support
If the certificate you use with the Apple Push Notification service (APNs) has expired, you can renew it using OS X Server.
Use these steps to renew any push notification certificates that have expired:
Open the OS X Server app.
Select your server in the Server app sidebar, then click Settings.
Click the Edit button next to the “Enable Apple push notifications” option.
Enter your organization's Apple ID in the sheet that appears, then click Renew to renew the expired certificate.
Deselect (uncheck) the “Enable Apple push notifications” option.
Select (check) the “Enable Apple push notifications” option.
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

I was getting the message missing msvcr80.dll so i did everything it said too and now it says i am missing apple application support error 2

i had a message that said i was missing msvcr80.dll and i did everything it said to and now it says i am missing apple application support error 2. how do i fix this

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Missing apple application support

I cannot get iTunes 9.0 to run on my pc, windows xp pro. I downloaded iTunes 7.0 and it worked on the computer but not with third generation shuffle. I keep getting the error 1, Missing apple application support. I have tried uninstalling, repairing, turned off firewalls while downloading etc. Does anybody have any ideas? Thank you

Hi,
Try uninstalling iTunes and the related Apple software, as shown here: http://support.apple.com/kb/HT1925.
Then download and reinstall the latest version of iTunes from here: http://www.apple.com/itunes/download/.
If you run into any issues, just post a reply here with the alert messages that appear in iTunes.
Also, this article: http://support.apple.com/kb/HT1926 provides *General installation troubleshooting* tips that will resolve most Itunes installation issues.
-Jason

Missing Apple Firewire NTSC

Hi all,
I've read tons on this but can't find a solution...please help.
I needed to output a spot to miniDV for a station (haven't needed to do this in quite a while) but when I start up to output there's the "(missing) Apple FireWire NTSC (720 x 480)" message.
I recently (past 6 or so months) upgraded to Final Cut Studio 3 (not sure if this is significant).
I'm certain all of my capture and sequence settings are correct (used EasySetup and checked settings).
I also:
trashed prefs
zapped the PRAM
removed QT versions and installed the most recent version
copied all additional easy setups to the library
checked cables and ports
reset decks to factory settings
checked system profiler is seeing decks
removed other peripherals on FW chain
My FCP is not seeing either of my decks – it won't load up the Apple FireWire NTSC for video or audio out.
It's not the decks – ultimately I had to transfer the project over to my laptop for output to the deck.
I don't know what to do.
I have:
Dual-Core 2x2.66 Xeon PowerMac G5 with 9 GB RAM
FCP 7.0.3, QT7.6.9, AJA Kona 3, JVC BR-HD50 Deck, Sony GV-HD700 Clamshell Deck
Thanks for any advice.

Woops! Thanks for replying.
Sorry for the disinformation – it's a MacPro 2nd Gen Dual 2.66 Intel Xeon with 9G RAM, AJA Kona3, and a 3ware Sidecar eSATA RAID.
The system recognizes both of my decks (JVC BR-HD50, and Sony GV-HD700). I'm just using the DV-NTSC easy setup to keep things simple and I check to make sure all of the AV tabs reflect these settings accurately.
This is the way I've always done it for going out to these decks for years now and I've never had any problems. I have a standard DV-NTSC sequence with bars and tone, slate, countdown, etc. for sending to stations. I haven't had to do this in quite a few months as stations are increasingly accepting digital files via ftp.
As I mentioned, I've done everything I've seen suggested online, and also tried the powered FW400 hub with no luck.
Thanks for any insight you might be able to give me on this issue.
Message was edited by: JWilson

[Missing] Apple FireWire

I can't get Final Cut Pro 4.5 to output to my DV deck, although it has in the past.
When mastering to tape I have device control of my Sony DSR-20 deck (I can lay black w/ timecode) but I can't output the program's video & audio. In my Audio/Video Settings, Video Playback indicates "[Missing] Apple FireWire NTSC (720 x 480)", although device control and blacking happens via firewire.
I also tried digitizing DV footage but can't bring in video or audio either. Capture Settings are Device Control: FireWire NTSC, and Capture/Input: DV NTSC 48 kHz.
FYI I have Final Cut Pro 4.5 running on a G5 with Panther 10.3.9 and Quicktime 6.5.2. Im aware of the issues some folks have had with Tiger and QT7 so Ive been hesitant to go there yet. Also, I have external drives firewired into the G5s back port, while the DV deck is firewired into the front port.
Thanks for any help --
Dan

I exported the program to my HD, unplugged the external drives, and tried again to see if FCP would recognize the deck without the drives. No luck.
I wonder why I'd need to add a new card? This has always worked fine before. It's just now that FCP can't locate my deck and input or output video/audio. At the moment I'm more concerned with outputting since I need to master to tape for a project I'm sending out.
I checked my external drives in System Profiler and they're all 400 Mb/sec speed -- I don't have an 800 speed drive connected, which I would guess might impact firewire's ability to detect devices.
I'm up for trying a new card. Is there one in particular that you would suggest? I'm considering this one:
http://www.firewiredirect.com/firewire/products/adapters_pci800.shtml
Thanks,
Dan

FCP5 - [Missing] Apple Firewire NTSC (720x480)

I just upgraded to Mac OSX 10.4.6 and Finalcut Studio.
I went to open FCP5 and look at all the new glory they offered me and found disaster. It gave me the "can't connect to device" message box on boot up. So I did my usual look at the deck and saw that it was on. But I'm still not able to connect.
Thus far, I've tried:
-restart my computer
-powercycle the deck (DSR-1800)
-Checked the firewire bus through the OS and it shows that a Sony device is connected
-remove all other firewire devices
-tried different firewire port
-I dumped the preference files for FCP4.5, but can't seem to find documentation on how to dump FCP5 files
I've seen a post from someone about dumping all traces of Quciktime and reinstalling it. I'm a bit leary about that for some reason.
I also have Media100 installed on my machine. With FCP4.5 I never had an issue, or noticed any integration of any sort. However, if I go to View->Video Playback I am currently getting the follwoing:
None
[Missing] Apple Firewire NTSC (720x480) (greyed out)
Digitial Cinimea Desktop Preview - Main
Media 100 NTSC 640 x 480 (640 x 480)
Media 100 NTSC 720 x 486 (720 x 486)
Media 100 PAL 768 x 576 (768 x 576)
Media 100 PAL 720 x 576 (720 x 576)
HELP!!
Thanks in advance

I'm having a similar issue, but a bit more extreme.
I have a PBook G4, and while I"ve tried all the following -
-restart my computer
-powercycle the camera
-Checked the firewire bus through the OS and it shows
that my device is connected
-remove all other firewire devices
-tried different firewire port
-I dumped the preference files for FCP5
-tried the cables and camera on a G5 with success
And I cannot get my laptop to recognize the camera. I have the same issue as this post -
And, if I try and open Log and Capture, it closes FCP immediately.
to quote the other post, -
if I go to
View->Video Playback I am currently getting the
follwoing:
None
[Missing] Apple Firewire NTSC (720x480) (greyed out)
Digitial Cinimea Desktop Preview - Main
any ideas?

[Missing] Apple Firewire NTSC (720x440)

I just upgraded my system software and Final Cut Pro from 4.5 to 5.1. I'm having a problem with the video output through firewire. FCP play video though my deck (Sony DSR 40) however, when I go to the log/capture tool, I can control the deck (but preview is disabled). Under the the Audio/Video Settings, the drop down menu for video playback says "[Missing] Apple Firewire NTSC (720x480)."
I've tried putting the deck on different busses, disabling other firewire devices, isolating the deck, rebooting the computer, reinstalling FCP software, and dumping the preferences (and probably a couple other things). I have checked all the refresh devices, etc. as well. All to no avail. Help!!! Any suggestions?
Thanks!

welcome to the forum!
You'll get good advice here and it's worth a visit even if you don't have a problem - you'll learn a lot from reading the posts.
This is a good workaround for curing your camera recognition problem:
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time but note that if you have QT Pro, you’ll have to re-purchase it.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Mac mini mid 2011 missing apple logo slide up animation at logon in Mountain Lion!

Here is a video I have found on Youtube to show the animation for those who didn't know, also showing a macbook pro which is missing this animation (Although in the video the OS is Lion but this is not the main point of this thread). the Apple logo gently slides up and the user image and password field appears:
http://www.youtube.com/watch?v=ztpCNmDYDZ4
I have installed Mountain lion on my Macbook Pro 13inch Early 2011 first and I loved this little animation which made the boot even more beautiful.
However when I installed Mountain Lion on my Mac mini mid 2011, I had to see that the animation is missing.
Luckily I have an iMac 21,5 incher Late 2009 as well, so I updated the OS and the animation was present on the iMac.
So I'm wondering if this is a bug or is there any reason why this nice animation is not visible on my Mac mini?
I did a Clean install as well to make sure it's not the upgrade's fault and I got the same result.
Both my Mac mini and Macbook Pro has SSD. My iMac has a regular HDD.
There was a thread opened about this issue where they said the animation issue would be solved in Mountain Lion:
https://discussions.apple.com/message/18890484#18890484
Well it was solved for my Macbook Pro and iMac seemingly but not for my Mac mini which is the latest from the family so it makes me sad that my newest computer is missing out on this little eyecandy. (Also I use the Mac mini most the time, so I miss this animation greatly)

Same problem here. My MacBook Air (mid, 2012) doesn't have the issue and the animation is smooth. The problem is with my Mac mini (Early 2009). When it boots the apple logo shows up, then the spinning circle and then the screen goes black and the login screen appears afterwards with no animation.

Missing Apple Application iPod touch (2nd generation

Help,
I can't find the App Store /Safari icons on my Ipod Touch (2nd generation) anywhere. I tried to enable/disable Restriction several time and the icons are still missing ? I even tried to reset the ipod touch and it doesn't seems to work still.
thanks,
Khoa

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Missing Apple ID

Similar Messages

Maybe you are looking for