Missing arrows for scrolling through tabs

I am missing the left and right arrow keys for scrolling through tabs. They show up in new windows, but not in restored windows.

The time it worked I completely closed all the "original restored" windows and made a new window with more than 11 tabs. This new window had the left/right arrows for scrolling through the tabs. They also appeared when I forced quit firefox and restored using session restore addon.
This is only happening to my previous sessions. Any new session is working fine.
Also my os is mac.

Similar Messages

My mouse wheel won't scroll through tabs

I can't remember if it was right when I updated to v.22, but if not then it was shortly after that my mouse wheel stopped working for scrolling through tabs. I can still scroll through pages just fine, but even on safe mode and with hardware acceleration disabled, if I put my cursor over tabs and scroll, nothing happens.

Hello,
note that to scroll through tabs with mouse wheel, you can position the mouse cursor, between the two arrows at each end, of the row of tabs. That means that you have quite a few tabs to see the arrows at each end.
otherwise, '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Arrow buttons for shifting through tabs stop working

On my Linux Ubuntu system with Firefox 17.0.1 (and with several earlier releases, eg 12-16 I think) after a few weeks the tab triangle or arrowhead on one or more Firefox windows becomes defective. This problem is different from http://support.mozilla.org/en-US/questions/931515 in that if I restart the browser and resume the Firefox session the problem goes away for a while. (Note: I will wait until 05:00 UTC on 28 Dec before restarting FF to clear the current instance of the problem, in case anyone can suggest other relevant tests or data.)
The main symptoms are these: Triple click no longer slides the list of tabs all the way left or right. Double click appears to work once (from an extreme end). Single clicks step the tab list one tab at a time up to near an extreme end but then stop working before the extreme tab becomes visible. The following paragraphs give some more details about the symptoms.
When the problem occurs, tabs for new pages (eg reached by links from the right-most visible tab and opened in new tabs) do not become visible (that is, are not squeezed into the list on the tabs bar). The right-facing triangle, although not grayed out, does not make the tabs for the newly opened pages visible, but seems to have no effect. Clicking the X for the right-most visible tab closes that page and then one of the tabs that are "hidden out to the right" becomes visible, but other tabs out to the right remain inaccessible.
Meanwhile, the tab triangle arrowheads continue to work ok on other FF windows. For example, the left and right tab triangles in this current FF window (where 15 tabs are visible for 17 pages open in the window) are working fine. But in the FF window with the problem (where 15 tabs are visible for 40 pages open in the window) the triangles stop working one tab too soon: they don't give access to the leftmost or rightmost tab.
Note, clicking + (Open a new tab) jumped the list to the right end, with the new tab and an empty page visible; but after I clicked the left triangle three times, so that the new tab scrolled off to the right, no matter how many times I click the right triangle, that tab remains invisible, even though the webpage for it is still visible as the currently selected page. Opening a URL from command line acts the same way.
The system runs Linux 3.2.0-35-generic #55-Ubuntu 12.04.1 LTS x86_64 system with Firefox 17.0.1. I don't remember when I first encountered the problem but believe it was in 2011 (vs 2010) on a Fedora 7 system. Restarting FF has always cleared the problem. The command line "echo session $DESKTOP_SESSION desktop $XDG_CURRENT_DESKTOP; wmctrl -m" produces (in part)
session ubuntu-2d desktop Unity
Name: Metacity
"top" shows, in part:
PID PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
3033 20 0 2158m 1.1g 38m S 7 28.7 3878:21 firefox
Note, I snipped 1200 lines of text from the Troubleshooting Information because the 50000 bytes in it pushed this post's length over the 30000 byte limit. All of the snipped lines started with "print.tmp.printerfeatures"

Firefox left/right arrows are broken.
When you have multiple tabs open and you use the left and right arrows to scroll through your open tabs, they stop at a certain point, you then have to click the little, "List all tabs" icon in order to access one of your open tabs.
This is on a Windows 7 64-Bit OS. I've already followed all the instructions, still no good. This is Firefox version 19.0.2

Scrolling through tabs in Firefox without opening them

With many tabs open we get two arrows on top of the screen to scroll left and right through tabs by clicking with the mouse. Please see the attached image for an example.
Is there a keyboard shortcut for those arrows or is it possible to add one?
Note: I am aware that we can scroll through tabs directly with Alt+[Num], or by using Ctrl+PgUp and Ctrl+PgDown. I have dozens of tabs open, so if I want to go to tab 35 I can't use Alt+[Num], and using Ctrl+PgDn is a problem if I'm say in tab 65. The reason is that with Ctrl+PgDn the tabs from 65 back to 35 would all open while I'm passing through them.

Image wasn't attached properly and I can't seem to edit the question. Here it is.

Is there a way to make the arrow keys scroll through a page (webpage or other)? Lately, it seems to go right from the top of the page to the bottom, skipping everything in between.

Is there a way to make sure the arrow keys scroll through a page rather than jumping from the top to the bottom?

It is kind of strange that the files are not being overwritten. If you publish to a local folder and upload with an FTP app you should be able to set this to over write the old files.
http://www.iwebformusicians.com/iWeb/Publish-Website.html
http://www.iwebformusicians.com/Search-Engine-Optimization/Upload.html

How can I stop Firefox from changing Tabs/pages when I use the up/down arrows for scrolling?

A recent update is causing the browser to switch between tabs, or even go on to other pages, when I use the keyboard navigation arrows to scroll down the page. This is aggravating, especially when filling out a form, which can submit before completion. The tab switching occurs mostly when the focus is not in a specific portion of the web page, such as when I have selected a tab. I I can find no way to disable this behavior.
Win 7 Ultimate fully patched, Firefox version 35.0.1

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Rendering of tab row and pages is totally messed up when I add/remove/scroll through tabs

After upgrading to 4b9 from 4b8, the rendering is totally messed up, whenever I add, remove or simply scroll through the tab row (if I'm calling it correctly). The tab row basically disappears and at least 5 seconds to come back, while lots of flashing and buggy behavior. During this time the rendering of the main page is also messed up.
After it finishes rendering, the main page could still be in a bad state. At which I have to switch tabs or scroll the main page, to force a re-draw of the main page, to get the rendering looking correct.
The only clue I have is that I have lots and lots of tabs open. And it looks like when I'm on the first few tabs it doesn't happen as badly.. This worked perfectly on 4b8.

I'm sorry to hear that you have so many issues. What version of Firefox were you using before?
The double title bar issue has been identified as an issue with the Tax Mix Plus extension but it doesn't affect everyone, it's an interaction with something else (not exactly clear what, although Norton Toolbar was mentioned in one thread).
There is a new version available that you could try. If Firefox is stable enough to do it...
orange Firefox button (or Tools menu) > Add-ons > "gear" icon > Check for Updates
If your beta version won't update, you could try installing [https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus/ from the add-ons site].
More generally, could I suggest disabling as many extensions as you can live without for 24 hours, and re-enable them gradually? This should help isolate interactions between them. As you know, you can do that here:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Finally, regarding your old session, if you haven't closed Firefox, you might find a sessionstore.bak file in your profile folder that contains your old session. To easily access that folder, try
Help > Troubleshooting Information > "Show Folder" button
Grab a copy of that file and save it somewhere outside the folder because it is overwritten when you close Firefox. Got to run, but if you find one with an appropriate date, someone can help you restore it.

Firefox features: smooth scrolling btwn tabs, how do you access/use this??

On the Firefox Features of Getting Started, "Smooth Scrolling" is described as "An elegant new feature lets you scroll through tabs easily to see them all and access the one you want quickly." But how does one do this??
I found this feature with the other "Tab" features like App Tab, Reopen Tab, Switch To, and Organize Tabs, etc...

That doesn't disable them, but merely moves them to below the location bar.
If you want to disable them, go to Options | Options | Tabs and remove the checkmark from: "Always show the tab bar".
Hovering the mouse near the top of the screen reveals the toolbars, not just tabs.
If it's not working for you, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

Scroll Through Emojis

My daughter, using an iPhone 5c, is reveling in her ability to scroll (up and down) through the list of emojis but for whatever reason my list is still in swipe left-to-right mode.
I'm running the latest version of iOS (8.1.3) but I'm not seeing the same thing. More frustrating than a functional issue but kind of maddening that I don't have it.
Anyone else seen this?

Excuse me
I have bought a pen tablet and it has the kapability of scrolling through layers.
It works in photoshop but in illustrator it doesn't work.
after I asked about this problem from related technical support, they proposed me setting it with related shortcut.
so I am looking for appropriate function or shortcut for scrolling through layers.
My adobe collection is CS6

Why is there no support for up and down arrow keys when scrolling through presets in adobe raw

seems like it would be common sense to support such a basic function, especially when having to scroll through about 100+ different presets(VSCO Film). We need support for arrow keys so that it may be easier to compare colors much more quickly. Also the support for comparing 2 of the same images would be even more awesome, RAW image on left, and Presets on the right, or compare different presets to one another.

You can submit it as a feature rquest, then forget about and go back to your life.

The arrows on the ends of the list of tabs wont allow me to scroll through them.

When a list of tabs gets long enough that the tabs go off the page, two arrows appear at either end that allow me to scroll through them but now theyre not working, what can I do?

If you start Firefox in [[Safe Mode]], does it work? It is possible there is an extension causing problems.

Scroll through fonts (using arrow keys) in CS3?

I've searched a couple dozen blogs and this forum, but I cannot seem to find a way to scroll through fonts using the arrow keys in CS3. The tips I've been able to find are for older versions of PS and don't seem to work with CS3. Am I missing something? Am I crazy?
Many thanks!
- An addled designer

Okie Dokie.
So, on the left, I have the type tool selected.
In the middle is the drop down font family panel.
On the right, you'll see that I have the text layer selected.
Oh, and you can see in the top that my text is not in editing mode (hence the lack of the green check/red "no" symbol).
Am I doing this correctly?
Oh and if I trash my preferences will I lose keyboard short cuts I've set up?
THanks again!

How to change keyboard shortcut for cycle through open tabs in PS and AI CC 2014

I would love to set my own keyboard shortcuts for cycling through open tabs in PS and AI 2014 on OS X. I found out that this can be achieved with ctrl+tab in PS, but I couldn't manage to make any of the suggestions in the forum work for AI. As said, I would like to set a more "standard" shortcut like alt+cmd+arrow-keys for both of the apps. If that shouldn't be possible, does anyone know a shortcut in AI CC 2014?
Many thanks!
Amadeus

Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

Problems with scrolling through premiere timeline using arrow keys and shift arrow

This is a really weird problem in cs6.
When I load a clip into the source monitor i can scroll throughit fine using the arrow keys, and shift arrows and my shuttle pro controller.
When I place the same clip on to the timeline it really struggles to scroll using the arrows or the shuttle pro, its really kerky and sdlwo to scroll the timeline, which is really frstrating, becuase it can play the footage fine in the source monitor.
The clips will playback fine, but scrolling through them just doesn't work as it should any ideas?
Cheers
Mike

I changed my shuttle settings to make the shuttling more responsive:
1 - 5 times second
2 - 10
3 - 15
4 - 30
5 - 45
6 - 60
7 - fast as possible
At least I changed this a long time ago - don't know if these are the defaults or not.
It'll only shuttle as fast as your system is responsive of course - so if you get instantaneous scrubbing by dragging the CTI in the timeline with the mouse, you should be able to get good performance with the shuttle. Of course that performance depends on the type of footage and how demanding it is on CPU to decode and whether youi have effects applied etc etc etc.
I edit pretty much exclusively with Sony XDCAM EX 1080P 25 footage we've shot on EX3 and PMW-350 etc and I get very very fast performance on the timeline - no issues at all i7 6 core 4GHz with 24Gb ram and fairly fast RAID array for footage.

***Cant Scroll through fonts using arrow keys

when trying to preview different fonts in AI i am unable to scroll through them using the arrow keys, it just doesnt move... can anyone tell me whats wrong? im sure its pretty simple but i have no idea how to fix it...if it can be fixed... oh im using cs3 and a mac on os x leopard

you cant scroll through fonts in photoshop too. the scrolling stops on an item of the list (maybe photoshop has problem with it), and 1. in photoshop, you can't jump over it, you have to manually place the selection on the item after the one that blocked the scrolling, 2. illustrator will jump backward and you will keep scrolling about max 5-6 fonts over and over.
the font groups divided with lines are meaningless. it doesn't have any relation with regional keysets or any good reason.
a lot of unusable font f....d into the middle of the page.
i have to scroll over a dozens of unusable system fonts, what I cannot uninstall from Windows.
no font management at all.
and yes waiting for another 300$ upgrade too.
(plus another upgrade for a flash, because flash drawing tools didn't see upgrades in their whole lifetimes.
these tools are covered with bugs from top to toe. because nobody takes care of them. 300$ / 1bug.)

Missing arrows for scrolling through tabs

Similar Messages

Maybe you are looking for