Missing Artwork after upgrade to version 10

Before upgrading to itunes 10 all my songs had artwork. Now the artwork is missing. Many albums will have the artwork for the first song and then its missing from the other songs in the same album.
Does anyone else have this problem?

I have the same problem. Since the upgrade artwork has just disappeared from many of my albums. It's not just that it's not showing in the album list, it's gone completely. If i "Get Info" then go to the artwork tab, the pane is empty where there used to be artwork. Using the itunes get artwork feature doesn't help, and as i spent a lot of time scanning in many of the images in the first place, I'm more than a little upset at having to do it again...
Is there any way to use Time Machine to recover it?

Similar Messages

Unable to add missing artwork after upgrading today to iTunes 12.1

I have a Macbook Pro running the latest updates. In fact, just a few minutes ago, I upgraded both the OS and iTunes to the latest versions of everything
(OS X Yosemite Version 10.10.2 & iTunes 12.1.0.50). Prior to the updates I have been fixing my missing albums artwork by going on the Net and copy and paste the appropriate artwork to my missing albums without any problems. After the upgrades, I tried to continue fixing my albums to no avail, I no longer have access to add artworks to my missing albums. The grey box with the music sign that represent the artwork that I used to use to paste the photo artwork to is now grayed out and I am no longer able to paste onto that location. Anyone else having this problem? Thanks in advance for your support. Bob

Not able to save album art to iTunes m4v movie file. Right clicked file in iTunes and chose MORE INFO, clicked the ARTWORK tab, used the ADD ARTWORK button. Image appears in info window but disappears when clicking OK. Image was not saved. All other text info was. Also tried to copy and paste inside artwork tab, does not let me. Also tried dragging the image to the artwork tab in both the top and middle areas, again image appears but then disappears when clicking OK. Also tried the OPTION KEY-RIGHT CLICK work around that worked in the previous version, no longer available. Using iTunes version 12.1.0.50 on 2009 iMac with Yosemite 10.10.2 Any info or discussion would be greatly appreaciated.

Texts are not showing up after upgrading to version 11

Could someone help me with why some of my texts are not show up on my Flash project? Before the upgrade, everything is fine. However, after upgrading to version 11, my texts are disappearing.
Before (version 10.3.183.7...)
After (version 11.0.1.152...)
The texts in the boxes will disappear, when I hover mouse cursor over it. Those boxes with texts in them are created with an external AS file, and the texts are dynamicaly changed/put in with an external XML file. There is a mask on the boxes, show only 4 at a time.
Demo: www.ethanslin.com/portfolioWorks/flashWorks/demo/
You will see the changes with Flash player version 11, and everything working fine with older versions.
I use iMacs with Snow Leopard and Lion, and this happens on all of the browsers with Flash Player version 11.01.152. I also tested on Windows 7, and it is still happening. Is this a Flash Player bug or something changed that I am not aware of? Is there a work around for this?

This is a known issue and we have a fix for this in our next release. Thanks for posting.

HT203175 After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

After upgrading to version 11.0.4.4 I get a "Itunes has stopped working" message when I try to start a movie on my PC. I have updated Quick time and previous version of Itunes worked great.

One thing is for sure, and that is if the only page i visit is the Google homepage (not logged in) or this site (mozilla forum), the problem does not occur, ever. I can't make it happen.
If i visit yahoo.com (not logged in) (or ighome.com, logged in), as examples, it happens every time.

Z10 not able to call oversea after upgrade to version 10.1.0.273

I live in Thailand and I usually make call to Malaysia using 009 service from CAT. The full number will be 0096057163xxx and I have been using 009 services for more than 10 years. After upgraded to version 10.1.0.273, I'm not able to make oversea call with 009 services. The reply is "The number you are calling is not in service", I try call with other mobile phones and everything work as per normal. I doubt the the latest version are not able to read and dial the first 2 digits "00". Please help to provide a solutions.

Checked with BB call center Thailand and they have not received similar complain from other customer, no solutions neither. I try making oversea call with 001, 007 and 008 follow by country code, all having the same problem. Especially for 008 follow country code 60 (Malaysia), it ends up calling to China. It seems like the firmware do not recognized the 3rd digit as it read it as 'country code' instead of international call service offer by CAT Thailand. This is really PISS me off and I hope RIM can do something about it!!

Anyone else having trouble with missing ringtones after upgrading to 8.1.1

Anyone else having trouble with missing ringtones after upgrading to 8.1.1?

Try resetting the keyboard dictionary
Settings>General>Reset>Reset Keyboard Dictionary

After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). How can I downgrade to version 5?

I am using ArcGIS 10 and Firefox 6 on Windows XP.
After upgrading to version 6 my ArcGIS files become corrupted if I save them while I have FF open (sporadic occurence, but limited to FF being open). Any ideas of what could be causing this? I have also posted on the ArcGIS forum site for input from that side.
How can I downgrade to version 5? If that is the only option available.

Thanks for the reply. It doesn't have to process the php, it just has to show the HTML content. It did that just fine before the last upgrade but won't now.
I've seen that page you referenced: http://kb.mozillazine.org/File_types_and_download_actions.
It doesn't help. The things it says to look for aren't there for me, specifically:
browser.download.pluginOverrideTypes
plugin.disable_full_page_plugin_for_types
I followed the rest of the instructions but it didn't help.
I did get it to quit opening tabs, instead it prompts me what it should do with the file every time now. What it should do, and used to do, is open the php page and display the HTML content.
Any other ideas?

After upgrade to version 20 of Firefox websites do not display anymore. Seems like v20 does not work well with ISA

After upgrade to version 20, we receive the following error when trying to open a website:
Error Code: 502 Proxy Error. The ISA Server denied the specified Uniform Resource Locator (URL). (12202)
Everything worked fine in the previous version of Firefox.

Found the fix for this:
Just set the following values to false in about:config.
network.automatic-ntlm-auth.allow-proxies
network.negotiate-auth.allow-proxies

My ipad will not stay activated after upgrading from version 7 to version 8.

After upgrading from version 7 to version8 I cannot keep my ipad activated. I have tried online tech support and visited an Apple store with no one able to tell me what is happening. Some said it might be had ware problems. Other say it might be software problems. With vs 7 I never had the problem.. I have anolder ipad with vs 5 and do not have the problems. any feed back from anyone.

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "'Start in Safe Mode"''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

Can not access Tiscali web mail account "undefined e-mails" message. This is after upgrading to version 5! Any solutions?

Did it work in Firefox 4, or did you skip that version?

Missing Airdrop after upgrade to Mavericks 10.9.1

Missing Airdrop after upgrade to Mavericks ( runing 8 g i5 mac pro)

Actually, the Evernote extension thing was just a coincidence.
It seems the real culprit is the firewire mixer connected to the laptop. After a reboot, I often have to shut the mixer off and then turn it back on before things start working properly.
Chrome is not the only software affected either. So far, I've discovered iTunes and Safari are also basically crippled after a reboot until I turn the mixer off.
Something is wrong with Maverick's implementation of FireWire, I'm afraid. I've written about cracking and popping noises I get from QuickTime when playing audio over FireWire.
Something just ain't right.

3GS IPHONE AFTER UPGRADE TO VERSION 6.0 SOME COUNTRY SIM CARD NOT ACTIVATED

why my iphone 3Gs after upgrade to version 6.0 and when i go to china slot in the local sim card it apeal "no sim card" which no problem and can be used before upgraded the software. what should i do to solve this problem.
thanks.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

After upgraded to version 5 few things missing..

Hi,
I am using blackberry curve 8520.. I have been using this for almost a year already. I noticed, there are few things missing and some problems occurred when I upgraded to version 5. Eg. Memopad, No column in option for alarm tones, my BB getting slower during browsing, everytime I try to connect to wi-fi, it will be intermittent or not connected.
For unable to connect to wifi, I suspected it is browser issue but then I set to default setting it is still the same.
Can somebody help me to rectify this please?
Tq.
Solved!
Go to Solution.

Memopad: 1. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
2. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
If still can't be found, read this link.
Alarms tones? Can you elaborate?
Slow or lagging device, please see below.
i don't know about your WiFi issue, you would also need to elaborate your problem.
To prevent freezing or lagging/slow response on any BlackBerry, the most important practice you can adopt is to be sure to CLOSE applications when you are finished using them.
If you just hit the red "end call" key to go back to the home screen the application actually stays open and running in the background. If you do this repeatedly you will have lots of apps open and consequently your memory will get used up. Lack of memory is the biggest reason your BlackBerry slows to a crawl or locks up. If you get into the habit of actually using the menu key to close the applications this will at least slow down this memory-clogging process. You still may have to do a battery pull or use the "Quickpull" app once in a while when things get slow.
To check what applications are running on your device in the background, press the Menu key then choose Switch Applications. You will see the icons of each application there.
So now, check your applications running in the background. There are commonly four or five applications that will always be running (Messages, Call Logs/Phone, BlackBerry Messenger, Homescreen, and the Browser; there are other third party applications such as BeeJive, and BlackBerry Alerts which will also run in the background which you cannot close if you want them to operate). Make certain that the browser is NOT on an active webpage (open the browser and choose Menu > Close). Close any other applications that do not need to be running (the camera or a game you were playing or Google Maps).
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Missing features after upgrade

I updated my 3GS to 4.0 and lost cell data (though it will show full bars and 3G), as well as MMS. I then got the iPhone 4 and restored from my 3GS backup. Now, I am missing those features as well FaceTime (which isn't even showing up in the phone settings). Anyone know what's going on?
Most important is obviously that I'm able to access the data network. I'd rather not restore entirely because I'd then lose camera roll, text history, etc.

Hello, I had the same problem yesterday after upgrading from Windows 8.1 to Windows 10. After searching the web I found this solution (source: http://support.hp.com/us-en/document/c01114052#SelectiveUpdate) which worked for me: Step 4: Selectively update the imaging device driverIf a webcam driver is recognized after running the scan for new hardware in Device Manager, verify it is the latest version of the driver. note:If there is an HP webcam driver on the product page for your model and OS, use that driver, otherwise use the Microsoft USB Video Device driver.In the Device Manager, under Imaging Devices, expand the list of webcam drivers, right-click the webcam driver, and then select Properties.Figure : Webcam PropertiesMake a note of the existing name of the webcam driver (Example: HP Webcam), as it may change after the update.On the Webcam Properties window, select Update Driver....When prompted, select the option to Browse the computer for desired driver.When prompted, select the Let me pick from a list of device drivers on my computer option.De-select the Show compatible hardware checkbox, select Microsoft in the Manufacturer pane, select USB Video Device in the Model pane, and then click Next to install the desired webcam driver.Allow the installation of the USB Video Device, and then click Close.View the Imaging devices option in the Device Manager to verify the presence of a webcam driver. Hope this works for you too. Regards,

Can't paste artwork after upgraded...

Can't paste artwork in "Multiple Item Information" after upgraded to the latest version!
Have to Add artwork in single song info.

Hi All,
Thanks for the reply. I used to copy the image from FireFox "Copy Image" or copy the image from Photoshop and just paste into the "Artwork" box in "Multiple Item Information". It always OK but now it just appear the tick only and blank in the box.
One time I tried copy image from ACDSee, it worked!!! It can paste from ACDSee!!!
I'll try "drag & drop" the image into the artwork box when I get home tonight, where I work is using MAC, can't test here.
Thanks a lot!

Missing Artwork after upgrade to version 10

Similar Messages

Maybe you are looking for