Missing at least one of my Contacts (strange)

My own information is missing- and no one else- from my Contacts on my Macbook Pro and my iPhone but is NOT missing from my iPad Mini (both the iPhone and iPad were upgraded to iOS7). Weird. Any suggestions?

who is the email account with?

Similar Messages

Upon installing Thunderbird on my new computer (after using Outlook and hating it) I am missing at least one folder. How do find that folder?

I have a new computer. My IT support asked me to give Outlook email another chance. I did for a week and decided it's not to my liking. So I installed Thunderbird.
I did a search to find an email, and the search came back - 0 found. I knew this was wrong.
I then went to find the folder the email would have been stored in and found that folder is missing from my fold list.
I do see the folder on my old computer which is still alive, but it's not showing up on my new computer. These are not local folders but are listed in the University's email server.

Sounds like you have an imap mail account.
If you cannot see a folder which is on the server, then you need to subscribe to see it.
So first question is 'Have you subscribed to see it?'
If it is a subfolder, you will need to subscribe to see it as well as the higher tier folder it is in.

Connection attempt to at least one service in a pool failed (Event ID 14584)

I see a number of these errors on my Lync 2010 Server. I don't have federations or any other connections to these domains listed in the details (see bolded text). Why is my server attempting to contact them?
Log Name:      Lync Server
Source:        LS Protocol Stack
Date:          3/16/2014 2:27:12 AM
Event ID:      14584
Task Category: (1001)
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      EdgeServer.mydomain.com
Description:
Connection attempt to at least one service in a pool failed.
Connection attempts to the following services have failed. Another attempt will be made for each service every 10 minutes.
Service Address: 128.229.5.30:5061; Pool FQDN: lcs.bah.com; Down Time: 65:25
Service Address: 128.229.5.39:5061; Pool FQDN: lcs.bah.com; Down Time: 65:55
Service Address: 151.151.42.145:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 66:14
Service Address: 151.151.42.148:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 71:17
Service Address: 151.151.42.151:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 71:17
Service Address: 151.151.42.154:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 71:17
Service Address: 170.12.17.4:5061; Pool FQDN: lync-edge.raymondjames.com; Down Time: 0:36
Cause: The specified service(s) are unavailable.
Resolution:
Check the servers in the pool(s) on which the service(s) are installed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Protocol Stack" />
    <EventID Qualifiers="50153">14584</EventID>
    <Level>3</Level>
    <Task>1001</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-03-16T07:27:12.000000000Z" />
    <EventRecordID>32162</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>EdgeServer.mydomain.com</Computer>
    <Security />
</System>
<EventData>
    <Data>10</Data>
    <Data>Service Address: 128.229.5.30:5061; Pool FQDN: lcs.bah.com; Down Time: 65:25
Service Address: 128.229.5.39:5061; Pool FQDN: lcs.bah.com; Down Time: 65:55
Service Address: 151.151.42.145:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 66:14
Service Address: 151.151.42.148:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 71:17
Service Address: 151.151.42.151:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 71:17
Service Address: 151.151.42.154:5061; Pool FQDN: sip.wellsfargo.com; Down Time: 71:17
Service Address: 170.12.17.4:5061; Pool FQDN: lync-edge.raymondjames.com; Down Time: 0:36
</Data>
</EventData>
</Event>
Blog /
Facebook / Twitter

To remove federation, verify from Topology builder that you disable lync federation.
To get round above issue. On the Edge open a remote certificate snap-in on a 2008 machine. Open another certificate snap-in of the local Edge. Copy the missing Trusted Root Certificate Authorities from the remote
machine to the Edge. This will hopefully include all the certificates relevant to your federated organizations, if not you'll need to acquire the root cert direct from the vendor.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

At least one amount is required in document rows

Hi all
I have written some code for JE transfer from a set of databases to one database with all valid accounts, customers etc existing in all. for a particular credit memo's JE, it gives me "At least one amount is required in document rows " error. the strange thing is, even if it gives this error message, the JE is created! I have thrown SDK's execpetion message and it returns this. from the error message, it sounds like either of the debit or credit amount is not given but that is simply not happening.
any idea?
thanks,
Binita

Hi,
Check whether any row level account is getting transfered with null or zero value in JE.
For more response i suggest you to post this thread in SDK Forum

Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
Invites to share a calendar to OD accounts on the server seem to work fine.
I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
I've tried creating a new test account and no luck.
I don't know what else to try.
Thanks in advance for any help!

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

Is there a way that you can have two different text fields (email, phone) that one at least one of them must be completed before submitting the form? Can it be done using javascript in the validation tab? if so, how?

Is there a way that you can have two different text fields (email, phone) that one at least one of them must be completed before submitting the form? Can it be done using javascript in the validation tab? if so, how?

Here is one solution:
// mouse up action for submit button;
function GetField(cName) {
// get field object for cName field with error checking;
var oField = this.getField(cName);
if(oField == null) app.alert("Error accessing field named " + cName + "\nPleae verigy field name, spelling and capitalizeation.", 1, 0);
return oField;
} // end GetField function;
var oPhone = GetField("phone");
oPhone.required = oPhone.value == oPhone.defaultValue;
var oEmail = GetField("email");
oEmail.required = oEmail.value == oEmail.defaultValue;
if(oPhone.required && oEmail.required) {
app.alert("Missing required fields.", 1, 0);
} else {
app.alert("Submitting form", 3, 0);
// additional code for submission;

Deployment exception : The deployment of at least one item aborted

Hello Everybody,
I am getting error in deploying any applications on WAS server.
It gives me following error.
just one application . other applications is OK
Help, anyone?
2009-6-26 17:47:32 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[005]Deployment aborted
Settings
SDM host : JT-PLDEV
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/perplpe/LOCALS1/Temp/temp57144FI_SEARCH_BXD.ear
Result
=> deployment aborted : file:/C:/DOCUME1/perplpe/LOCALS1/Temp/temp57144FI_SEARCH_BXD.ear
Aborted: development component 'FI_SEARCH_BXD'/'local'/'LOKAL'/'0.2009.06.26.17.47.22'/'0':Caught exception during application deployment from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Cannot deploy application local/FI_SEARCH_BXD.. Reason: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro.; nested exception is:      com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
2009-6-26 17:35:20 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] INFO:
[004]Additional log information about the deployment
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/TD1/JC00/SDM/program/log/sdmcl20090626093509.log]/>
<!PATTERN[sdmcl20090626093509.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
Jun 26, 2009 5:35:09 PM Info: -
Starting deployment -
Error handling strategy: OnErrorStop
Prerequisite error handling strategy: OnPrerequisiteErrorStop
Update strategy: UpdateAllVersions
Starting deployment prerequisites:
Loading selected archives...
Loading archive '/usr/sap/TD1/JC00/SDM/program/temp/temp57143FI_SEARCH_BXD.ear'
Selected archives successfully loaded.
Actions per selected component:
Update: Selected development component 'FI_SEARCH_BXD'/'local'/'LOKAL'/'0.2009.06.26.17.35.09'/'0' updates currently deployed development component 'FI_SEARCH_BXD'/'local'/'LOKAL'/'0.2009.06.26.17.17.23'/'0'.
Ending deployment prerequisites. All items are correct.
Saved current Engine state.
Starting: Update: Selected development component 'FI_SEARCH_BXD'/'local'/'LOKAL'/'0.2009.06.26.17.35.09'/'0' updates currently deployed development component 'FI_SEARCH_BXD'/'local'/'LOKAL'/'0.2009.06.26.17.17.23'/'0'.
SDA to be deployed: /usr/sap/TD1/JC00/SDM/root/origin/local/FI_SEARCH_BXD/LOKAL/0/0.2009.06.26.17.35.09/temp57143FI_SEARCH_BXD.ear
Software type of SDA: J2EE
Begin of SAP J2EE Engine Deployment (J2EE Application) *****
Begin of log messages of the target system:
09/06/26 17:35:12 - ***********************************************************
Start updating EAR file...
start-up mode is lazy
- EAR file updated successfully for 237ms.
- Start updating...
- EAR file uploaded to server for 823ms.
- ERROR: Not updated. Deploy Service returned ERROR:
                     java.rmi.RemoteException: Cannot deploy application local/FI_SEARCH_BXD..
                     Reason: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro.; nested exception is:
                          com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro.
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:683)
                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:319)
                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:200)
                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                          at java.security.AccessController.doPrivileged(AccessController.java:219)
                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
                     Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro.
                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:406)
                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3186)
                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:671)
                          ... 10 more
                     Caused by: java.lang.NullPointerException
                          at com.sap.engine.services.webdynpro.util.Procedures.switchio(Procedures.java:40)
                          at com.sap.engine.services.webdynpro.ArchiveParser.extractEntry(ArchiveParser.java:127)
                          at com.sap.engine.services.webdynpro.ArchiveParser.process(ArchiveParser.java:101)
                          at com.sap.engine.services.webdynpro.PApplication.process(PApplication.java:170)
                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:949)
                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
                          ... 16 more
                     For detailed information see the log file of the Deploy Service.
09/06/26 17:35:15 - ***********************************************************
Jun 26, 2009 5:35:15 PM Info: End of log messages of the target system.
Jun 26, 2009 5:35:15 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jun 26, 2009 5:35:15 PM Error: Aborted: development component 'FI_SEARCH_BXD'/'local'/'LOKAL'/'0.2009.06.26.17.35.09'/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application local/FI_SEARCH_BXD..
Reason: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro.; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application local/FI_SEARCH_BXD in container webdynpro.
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Jun 26, 2009 5:35:15 PM Info: Starting to save the repository
Jun 26, 2009 5:35:17 PM Info: Finished saving the repository
Jun 26, 2009 5:35:17 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Jun 26, 2009 5:35:17 PM Error: -
At least one of the Deployments failed -
Edited by: Gavin Zheng on Jun 26, 2009 6:16 PM
Edited by: Gavin Zheng on Jun 26, 2009 6:16 PM
Edited by: Gavin Zheng on Jun 26, 2009 6:17 PM

Hi,
1) Please check if J2EE engine is up or not. Please make sure that its up and running.
2) Please close the project, NWDS and then again open NWDS, project. Deploy the application.
3) Contact your BASIS consultant and explain the problem to him. Many time, BASIS consultant do carry out some BASIS activities and at that time you get this type of error.
4) If nothing works out, get your Portal restarted.
Regards,
Gary

Build - Generates an "NTSC DVD requires at least one AC3 or PCM Audio track"

I'm using the trial version to make my first DVD with Encore. All went fairly smoothly until I went to "build" the DVD and received the "NTSC DVD requires at least one AC3 or PCM Audio track..." message. I continued with the build and tested the DVD. All the audio was fine except for audio assigned to my menus via the audio section, assigned from the motion tab, was not heard on the DVD. The Menu audio did however sound good from the preview mode. The audio that I tried to use in the motion audio field, was from a M2P file from the same clip that worked fine on the DVD. The video field was not set to anything on the motion menu.
My questions are: 1) How do I clear the error? 2) How do I get the Audio on my menus?
(Not sure if this item belonged in the forum, the error forum, or the audio forum - Sorry).
I don't even know for a fact that the error message was tied directly to the menu. I'm sure its something basic that I just missed - Thanks.
Eric

Thanks you very much, now I will be able to sleep tonight. My editing system (Edius) had both the ability to export my sound track to PCM AIFF & PCM WAVE, which worked great for the sound on the menus, as well as an elementary stream (M2V) format which worked good for the main sound track. I looked in the Audio Forum to find out about the elementary streams. The end result is that my DVD build error cleared as well as getting audio on the menu.
Once again, thank you both for your help.

ZipException: ZIP file must have at least one entry

When I place a security constraint on jar files in a Tomcat server to prevent unauthenticated access to the jar files
<security-constraint>
<display-name>Security Constraint</display-name>
<web-resource-collection>
<web-resource-name>ee</web-resource-name>
<url-pattern>*.jnlp</url-pattern>
<url-pattern>*.jar</url-pattern>
</web-resource-collection>
our jnlp applications can no longer download the needed jar resources and I get the following exception. ( It works fine when I take jar files out of the security-constraint list.) Any suggestions on why this is happening and how to get this to work?
Thanks.
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(Unknown Source)
     at java.util.zip.DeflaterOutputStream.close(Unknown Source)
     at java.util.zip.ZipOutputStream.close(Unknown Source)
     at com.sun.deploy.net.HttpDownloadHelper.download(Unknown Source)
     at com.sun.deploy.cache.Cache.downloadResourceToTempFile(Unknown Source)
     at com.sun.deploy.cache.Cache.downloadResourceToCache(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.actionDownload(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResourceCacheEntry(Unknown Source)
     at com.sun.deploy.net.DownloadEngine.getResource(Unknown Source)
     at com.sun.javaws.LaunchDownload$DownloadTask.call(Unknown Source)
     at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
     at java.util.concurrent.FutureTask.run(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

What am i missing here???
ZipOutputStream zos = new ZipOutputStream(new FileOutputStream("out.zip"));
void goDir(String dirName) {
File dirObj = new File(dirName);
if (dirObj.exists() == true) {
if (dirObj.isDirectory() == true) {
// create an array of File objects
File[] fileList = dirObj.listFiles();
for (int i = 0; i < fileList.length; i++) {
if (fileList.isDirectory()) {
goDir(fileList[i].getPath());
else if (fileList[i].isFile()) {
goZip(fileList[i].getPath());
} // loop
else {
else {
void goZip(String filePath) {
try {
FileInputStream fis = new FileInputStream(filePath);
BufferedInputStream bis = new BufferedInputStream(fis);
ZipEntry fileEntry = new ZipEntry(filePath);
zos.putNextEntry(fileEntry);
byte[] buff = new byte[1024];
int len;
while ( (len = bis.read(buff)) > 0) {
zos.write(buff, 0, len);
zos.closeEntry();
bis.close();
catch (java.io.IOException ioe) {
ioe.printStackTrace()

Missing Themes option and touch sensitivity is strange..Sticky swiping

Just bought 2 new blackberry storm 9350 one from Amazon and one from ebay for my husband. Both arrived new in their individual boxes. One was made in Canada (Amazon), and one was made in Mexico (ebay). The one made in Canada does not have options to choose different themes. That is my main concern.
A second strong concern is  the touch sensitivity is really sticky on the one from Canada. The touch sensitivity is real nice on the one from Mexico. I set touch sensitivity exactly the same on each, but the Canadian one is not nice at all swiping is really sticky.
Note:   This is my 3rd blackberry storm, and my husband's 2nd. These 2 are not acting quite like the earlier ones.
3rd issue is that The one from Canada did not come with a charger...Only the adapters for foreign outlets but no charger to plug them into. It did come with a manual and cds. However the one from Mexico did not come with a manual or cds (luckily I have one from the other box)

This is a partial duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Storm/mms-missing/m-p/2603751#M67694
But, given the additional information in this thread, I would deduce that the condition of at least one, and perhaps both, of the devices is not "new"...rather, a used device that has been carefully repackaged so as to deceive the purchaser into thinking they have bought a truly new device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Exception : DI Error: (-5002) At least one amount is required in document rows

Trying to create a MaterialRevaulation object. doesn't matter what I am using I can getting this error message "Exception : DI Error: (-5002) At least one amount is required in document rows"
Formate of payload looks like
<Payload Role="X" id="atom1">
- <MaterialRevaluation xmlns="">
- <row>
<RevalType>P</RevalType>
<DocDate>20140701</DocDate>
<JournalMemo>Inventory Revaluation</JournalMemo>
<InflationRevaluation>tNO</InflationRevaluation>
</row>
</MaterialRevaluation>
- <MaterialRevulation_Lines xmlns="">
- <row>
<LineNum>0</LineNum>
<ItemCode>Item1</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>14.973030</Price>
</row>
- <row>
<LineNum>1</LineNum>
<ItemCode>Item2</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>15.973030</Price>
</row>
- <row>
<LineNum>2</LineNum>
<ItemCode>Item3</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>13.973030</Price>
</row>
</MaterialRevulation_Lines>
</Payload>
And my SBO object call looks like this
<Payload Role="C" id="atom2" system="0010000102" status="success" b1login="Technical User" method="Synchronous Insert with fallback to Update" objectid="162" payload="atom1" keyname="" keyvalue="" DIresult="failure" DImsg="Exception : DI Error: (-5002) At least one amount is required in document rows" />
I don't think I need to put anything in KeyName or Keyvalue. Since I am insert.
But it looks like it is not even look at the XML changes. I have tried to with no change
1. Add BOM/BO admin structure
2. Rouding price difference (from 0 decimla ot 6)
3. Put in Quantity
4. Add LineNum
5.Change Item
6.Change WHS
Running out of ideas!! Any help will be appreciated. Thank You!

Successful format looks like this
Strange enough, and I still don't know why. Certain item in combination give me the error message. If I break it out to individual document. Then it give me the proper error message. But if it bundled with number of item together then it become this at least one amount is needed at document row error message.
<BOM xmlns="">
<BO>
<AdmInfo>
<Object>162</Object>
<Version>2</Version>
</AdmInfo>
<MaterialRevaluation>
<row>
<DocDate>20140702</DocDate>
<RevalType>P</RevalType>
</row>
</MaterialRevaluation>
<MaterialRevaluation_lines>
<row>
<ItemCode>ITEM1</ItemCode>
<WarehouseCode>WH1</WarehouseCode>
<Price>14.587</Price>
</row>
</MaterialRevaluation_lines>
</BO>
</BOM>

One of my contacts is unable to receive my text messages since I updated my iPhone 4s?

Since updating my iPhone, a few of my contacts have been unable to receive my text messages? One of the contacts originally had an iPhone but changed device before I updated, I was able to send and they were able to receive text messages prior to the change, the problem has arisen since update? More recently another contact who also has an iPhone is now unable to receive my text messages? Has anyone else experienced this problem, and if so what did you do to resolve it? Thanks.

Hi susandlee,
Wow this definitely sounds like strange behavior and something we need to investigate further. I want to find out, on your iPhone 5, do you have any signatures set? When you send text messages, do you include any emoticans or special characters? These aren't compatible with all type of devices and networks so we want to eliminate any causes of the trouble. If you do have anything like this set please remove the items and test the texting communication again. We look forward to hearing back to get this resolved.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

Resulting grid does not contain at least one row, one column and one POV

I have upgraded to 9.3.3 recently.
We have a front end app which will run MDX queries to retrieve data.
Sometimes based on the users selections MDX query might get back nothing i.e will get #missing across all rows/columns and this works fine with the existing 9.3.1 essbase server.
If I run the same query against a 9.3.3 essbase cube I get the error "Resulting grid does not contain at least one row, one column and one POV. If you have any suppress row options selected pls clear them."
I DO NOT have Supress missing data/zero enabled. Not sure why I get this error even though I dont have that option enabled.
Essbase 9.3.3 on HP-UX ITanium 11.31
APS 9.3.3 on win 2003 R2
Smartview 9.3.3 - also tried with smartview 9.3.1.6 and see the same error.
Any suggestions to fix this issues?

The front end is using a VBA command "hypexecutequery" and with 9.3.3 essbase I get a return code -9 which means Operation was cancelled as per the smartview doc.
In 9.3.1 essbase I get the return code 0 which means the query is fine even if it does not return any data.
The query I am using now will return nothing as it is a check to see if there is any data. But with 9.3.3 Essbase I get an error code -9 which looks like it does not like the syntax or something.
Any suggestions?

I am not receiving emails from at least one person.

I am not receiving emails from at least one person. The emails don't show up in my Junk mailbox and they do not get an email that there email did not go through. Their address is in my mail recipients list. Does anyone know why this is happening? Is there somewhere else that email get's filtered? If there is somewhere else, I'd like to fix it so that this users emails get sent through. I'm very concerned that there could be other people that are trying to send me emails that are getting through that I may not even know about yet. Thanks for any help that you can lend.

Hi Ricardo,
Contact iTunes Support:
http://support.apple.com/kb/HE57
Cheers,
GB

EWS Managed API - update appointment - 'At least one recipient isn't valid.' during update item with invitation mode set to SendToNone on Exchange 2013

Hi All,
My team works on a managed EWS API based solution but we've found a behavior of the managed EWS API that we can't explain based on dev documentation (maybe we've missed or misunderstood something).
The problem is that the following piece of code throws 'At least one recipient isn't valid.' error in the line "up.Update"
I don't have any recipients for the appointment so that's true that there is no valid recipient but on the other hand I set the invitation mode to SendToNone so the update changes shouldn't be sent to any recipient. That's is also interesting why the
behavior is different when SendToNone is used during creation and SendToNone during updating (the commented out lines). The update works fine in this case.
try
var ap = new Appointment(service);
ap.Start = new DateTime(2014, 1, 31, 10, 0, 0);
ap.End = new DateTime(2014, 1, 31, 11, 0, 0);
var r = new Recurrence.RelativeYearlyPattern();
r.DayOfTheWeek = DayOfTheWeek.Friday;
r.DayOfTheWeekIndex = DayOfTheWeekIndex.Last;
r.Month = Month.January;
ap.Recurrence = r;
ap.Recurrence.StartDate = new DateTime(2014, 1, 31, 23, 30, 0);
ap.Subject = "abc";
// ap.Save(WellKnownFolderName.Calendar, SendInvitationsMode.SendToNone);
ap.Save(WellKnownFolderName.Calendar, SendInvitationsMode.SendOnlyToAll);
var up = Appointment.Bind(service, new ItemId(ap.Id.UniqueId));
up.Recurrence = new Recurrence.DailyPattern(new DateTime(2014, 1, 29), 3);
up.RequiredAttendees.Add("[email protected]");
// up.Update(ConflictResolutionMode.AlwaysOverwrite, SendInvitationsOrCancellationsMode.SendOnlyToAll);
up.Update(ConflictResolutionMode.AlwaysOverwrite, SendInvitationsOrCancellationsMode.SendToNone);
catch (Exception e)
Console.WriteLine(e.Message);
The problem seems to only occur on Exchange 2013. We have also two test boxes with Exchange 2013 and the behavior also slightly differs between the boxes. On the first test box the problem occurs always but on the second one the problem only occurs in specific
appointment configurationd. I've never configured exchange 2013 myself so I don't know if there is any parameter during set up that may impact this behavior.
Does anybody see any problem with the above code?
Thanks in advance for help

Were you able to figure what was going on with your first problem? we're seeing the exact same issue with one of our customers.

Missing at least one of my Contacts (strange)

Similar Messages

Maybe you are looking for