Missing attachment in mail Lion

Hi,
After upgrading snow leopard to Lion, when using mail in mac os, I have problems with attachments.
Mail displays all attachement with an icon but when you select a message with an attachment icon, the attachment is missing. Moreover, when you are sending an email with attachment, in your sent mailbox, the attachment is not displayed.
I have tried to rebuild my mailbox account, or to remove and purge it an reinstall it (with imap), without any success. I know this is due to Lion, because I have tried to open my mailbox through a webmail client and all attachments are displayed.
The latest update of Lion (10.7.1) does not fix this problem.
Does someone have fix this very annoying bug ?
Thank you

I am not having this issue with mail and Lion. And some
of the mailboxes I have have been carried as far back
a Tiger (2006 as a matter of fact).
You may have a permissions issue or a User account
issue.
First, easiest thing would be to go to Disk Utility
and repair permissions on your hard drive.
If that doesn't resolve the issue, create another user
on your Mac and log into that account. Then set up your
email in that account and see what happens. Sometimes
user accounts can get corrupted causing some strange
behaviors in mail, address book, etc.

Similar Messages

Missing emails in Mail - Lion deleting them?

I'm using Mail with two IMAP accounts (oneis gmail), and I'm experiencing a little weirdness.
I seem to be missing emails coming in, which I'm not deleting or filing away.
I got in late last night and checked my emails on my iPhone. I read one that needed to be replied to today, then closed Mail on my iPhone and went to bed.
This morning, I jumped on my Lion iMac and opened Mail - and the email I read on my iPhone doesn't appear in my inbox. I checked on my iPhone and iPad and it's not there either.
I didn't delete it or move it or do anything other than read it on my iPhone.
I asked on another forum, and one person said the following:
I am experiencing the same thing. I seem to be able to send email from the Lion's new Mail, but can't receive any.
I have several mail accounts in Mail and the problem seem to be the same with all of them regardless of whether on exchange server or not. The strange thing is that I can see and read some of the "invisible" incoming mail in my iPhone, but if I try to refresh my Mail accounts on mac, it may delete the new emails also from my iPhone! The disappearing emails are nowhere to be found and I have also checked the external exchange service mail boxes and junk mail and spam boxes.
Quite serious bug causing a lot of harm!
So it doesn't seem to be just me.
Anyone else?
Cheers.

Ditto,
I have an Exchange, 5 IMAP, and a POP account. I only have the exchange and an IMAP set up on my phone and iPad, so I only know that those are acting odd for sure. Not really sure what the problem is. The emails are showing up in searches. I have a special "ding" for when my wife emails me and that sounds, but I can only see it if I search for it. The message, along with, most, others wont show up in my inbox...
I'm a part of the developers beta for iCloud and have iOS 5 beta on my iPad but not my iPhone. Not sure if that has anything to do with it, but I figured I should mention.
I really have no idea where to start to fix this bug. Maybe adding and removing the account, but if it's a problem spanning multiple accounts, that doesn't seem likely and with the number of email I have, it'd require quite a while to sync up again.

Missing attachements on iPhone when sending from mail.app

I am with 3 collegeas and we are missing attachements when mail is send from mail.app on the mac.
We use different mail all based on imap.
google apps (exchange mail)
dovecot imap server
both will sometimes not receive attachements.
this happens in 4.2.1 and in 4.3
it's helll!!

Sorry i forgot to tell the attachment is missing on the iphone4 4.2.1 or 4.3.
The mail is send from a mac with mail.app

File attachment in mail missing

I am using iphone to read my corporate emails. I received an email with attachment 8MB and was asked to download full message. Once I downloaded the full message, the attachment was missing and a text message (See attached file: filename.zip) was replaced. If I forward the email, the recipient did not received the attachment, even if I chose Include attachment option. Where did the attachment goes? How do I solved this problem?

Hi Jagesh,
The content type of the Pdf has to be identified, in order to conver the pdf successfully, You need to perform the conversion usign the PayloadSwapBean the Module tab. You use this when you want to receive attachment using Mail adapter. You need to configure few steps in Module Configuration
There you need to mention your MIME header paramenters Content-Type, Content-Description.
How this can be configured and how process with PayloadSwapBean check the below link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
Module Processor
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
Regading MessageTransformBean, Migrating Dispatcher Classes
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
Regards,
Prasanna

Pdf attachment from mail to ibooks?

hmm, how do you 'import' pdf attachment from mail into ibooks 1.1? i hit downloaded on iphone mail, it loaded with img, not even a pdf. flip back to ibooks, hit pdf tab, its not there. am i missing something here?
thanks guys
Message was edited by: Tran Hoang Long

I have the latest version of iTunes with iBooks, and it doesn't have anywhere to drag PDF files into iTunes. Where are you seeing this? I tried every imaginable PDF, include a text document, I printed to PDF from textedit, then dragging it into the pane of grayed out books in iTunes.
What gives?
Here's a screenshot:
http://drp.ly/1eMh5M

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time -been

My computer is running slow after Yosemite install -but in the Mail program, when I open an email and then open the attachment -all is good -when I close the attachment the Mail program goes away, and I have to reopen it in my Dock -every time.

I tried this, but no luck. I went to Previous System>Users. There is nothing inside the "Users" folder, so I hit a dead end.
I can find my new e-mails -- those that came in since I re-installed the system -- in my NEW system (which I did to see if I was correctly understanding the advice), by going to Users>Home>Library>Mail>POP account name>Inbox.
Let me add a new question: I am running PhotoShop C3. It opens OK, and I can use it, but when it opens I get this message: "One or more files for Adobe Application Support folder are missing. Please re-run the PhotoShop installer."
I don't like re-installing working programs if I can avoid it, because it always seems to lead to other issues. Any idea what files are missing, and where it/they might be in the Previous System folder?
thanks
Mike

Fetch data from table and generate attachment than mail it.

Hello Experts,
From couple of day I am searching on Google for a better database procedure that will help me to get data from tables and generate attachment and mail it but i fail.
My Scenario is:
I have a query that will fetch almost 5000 records from database tables. Each record has almost 75 characters
select a.location_code,
               a.item_code,
               b.description item_desc,
               to_char(a.manufact_date,'ddMonyy')mfg,
               to_char((a.manufact_date + nvl(b.expiry_period,0)),'ddMonyy')expr,
               to_char((a.manufact_date + nvl(b.qurantine_period,0)),'ddMonyy')qrtn,
               round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) days_elapsed,
               a.closing_balance_posted quantity
          from wms_stock_current_balance_v a, wms_item_setup_mast b
         where a.closing_balance > 0
           and a.item_code = b.item_code
           and a.loc_type in ('RACKING','PICKING','QUICKA','BUNDLED')
           and nvl(b.qurantine_period,0) > 0
           and round(nvl (b.qurantine_period, 0) - (sysdate - a.manufact_date)) <= 0
      order by a.item_code, a.location_code;
Sample data of above query is
LOCATION_CODE
ITEM_CODE
ITEM_DESC
MFG
Expiry
Quarantine
Days Elapse
Quantity
13DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
14DL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
134
14DL2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
14DR2
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
20
14LL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17ER2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17GL2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
17SL0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
64
18QL0
000000000000000F0487
CLEAR COOL BLACK 05ML
23-Feb-10
3-Apr-14
7-Jun-13
-119
160
19AR5
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
160
19DL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
19JR0
000000000000000F0487
CLEAR COOL BLACK 05ML
17-Feb-10
28-Mar-14
1-Jun-13
-125
60
19TL1
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
160
20GR2
000000000000000F0487
CLEAR COOL BLACK 05ML
20-Feb-10
31-Mar-14
4-Jun-13
-122
40
36FL3
000000000000000F0487
CLEAR COOL BLACK 05ML
18-Feb-10
29-Mar-14
2-Jun-13
-124
65
19UR0
000000000000000F0591
COMFORT WHITE 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
1
12SL1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
12SR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
42
14OR1
000000000000000F0593
COMFORT PINK 24ML*300
28-Oct-09
28-Oct-11
1-May-11
-887
8
36EL4
000000000000000F0594
CLEAR HF DECRASE 5M*360
14-Feb-10
14-Feb-11
12-Oct-10
-1088
14
13VL1
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
160
14ER0
000000000000000F0595
CLEAR COM SFT CRE 5*360
8-Feb-10
8-Feb-11
6-Oct-10
-1094
105
Database Info
Oracle 10g
Version 10.2.0.1.0

Look at the sample code for generating a CSV file that I've just posted in response to a similar question:
Re: How to execute a proc and spool files in a database job
And the use the search button in this forum to find sample code for sending a CLOB as a plain/text e-mail attachment using UTL_SMTP.

Smart Forms - Attaching HTML file as an attachment in Mail

Hai,
I have following requirements. I have to send the Payment Advice document output as a HTML format to the vendors.
I am able to get the smartforms output as html file. The output of smartforms i am capturing
   call function '/1BCDWB/SF00000170'
      exporting
        control_parameters = w_control_parameters
        output_options     = w_output_options
        user_settings      = 'X'
        w_t001             = w_t001
        w_reguh            = w_reguh
        w_regud            = w_regud
        w_e1idrs1          = w_e1idrs1
      importing
        job_output_info    = w_job_output_info
      tables
        t_item             = t_item
      exceptions
        formatting_error   = 1
        internal_error     = 2
        send_error         = 3
        user_canceled      = 4
        others             = 5.
    w_xmloutput = w_job_output_info-xmloutput.
*-SAP Smart Forms: Result of XSF Transformation
    w_htmldata = w_xmloutput-trfresult-content[].
Currently the w_htmldata informations are stored in the form of RAW 1024 characters.
Using the below mentioned FM the attachment information i am passing through
       contents_txt               = it_message
parameters. The contents_txt support only 255 characters. But the smartforms returns RAW 1024 characters. When the HTML attachment is not showning the content properly and the data displays is misaligned. Kindly give me the suggestion how to overcome this issue !
call function 'SO_DOCUMENT_SEND_API1'
      exporting
        document_data              = w_doc_data
        put_in_outbox              = 'X'
        sender_address             = ''
        sender_address_type        = ''
        commit_work                = 'X'
      importing
        sent_to_all                = w_sent_all
      tables
        packing_list               = t_packing_list
        contents_bin               = t_attachment
        contents_txt               = it_message
        receivers                  = t_receivers
      exceptions
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
        operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        others                     = 8.

Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

How do I send a large (23mb ) PDF file as an attachment in mail?

How do I send a PDF mail attachment in mail that is greater than the crazy limit of 23MB? Thanks for your help!

Have you upgraded to Yosemite? Then you could send the attachment using Mail Drop.
You can use Mail Drop to send files that exceed the maximum size allowed by the provider of your email account. Mail Drop uploads the large attachments to iCloud, where they’re encrypted and stored for up to 30 days.
If you have an iCloud account and you’re signed in to iCloud when you click Send, Mail automatically sends the attachments using Mail Drop. Mail Drop attachments don’t count against your iCloud storage.
If you don’t have an iCloud account, or if you’re not signed in, Mail asks you whether to use Mail Drop (select “Don’t ask again for this account” to always use Mail Drop).
If a recipient uses Mail in OS X Yosemite, the attachments are automatically downloaded and included in your message just like any other attachment. For other recipients, your message includes links for downloading the attachments and their expiration date.
You can turn Mail Drop on or off for an account. Choose Mail > Preferences, click Accounts, select your account, click Advanced, then select or deselect “Send large attachments with Mail Drop.”

Problem in Sending .txt as an attachment to mail

Dear Experts,
I am working on a file to mail scenario. I have searched a lot in sdn, but could not locate the exact answer for the same.
I am using file adapter to pick up a txt file from a location and supposed to send this as an attachment to mail(in box).
My scenario is ready, have configured the IR and ID. there are only 5 fields at the sender side, have done one to one mapping at the receiver side.
question is
1) Do I have to use content conversion at the sender side in order to read the file in XI or....
2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
Kindly provide your valuable suggestions or idea to proceed , as i am confused how to proceed wz the same.
Thanks
Virendra

Hi,
1) Do I have to use content conversion at the sender side in order to read the file in XI or....
Since ur source is a .txt file... to convert it to a xml format u need to use the FCC in file adapter.
2) Can i send the payload of the message as an attachment? Do i have to configure anything else for the same for eg
You can send the payload of a message as a attachment.
I hope u dont want to send the XML structure as a attachment... In receiver...first u have to convert the XML to a .txt file and then
u need to send this .txt as a attachment..
If this is ur requirement u can do it by using the inbuilt EJB's and a Mail adapter in receiver.
The inbuilt bean is MessageTransformationBean... which can convert a XML structure a Text file.
and then u have to pass it to Mail adapter... Please keep in mind the sequence of processing.
If clarification needed u can put a post again
3) where i have to configure my sender and receiver, has to be in mail adapter or in xml payload?
U need to configure both sender and receiver. Sender is a file adapter and receiver is a Mail adapter.
Decide first u want to use mail package or not..
For ur scenario u can do both ways using Payload or XIALL..
Babu

Is it possible to send xls attach in mail in background ?

is it possible to send xls attach in mail in background ?
i build/copy program to send attach file in xls format ,
its work fine in foreground but do nothing in background ,
What can be the reason?
the section of the sending :
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      DOCUMENT_DATA              = W_DOC_DATA
      PUT_IN_OUTBOX              = 'X'
      SENDER_ADDRESS             = LD_SENDER_ADDRESS
      SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
      COMMIT_WORK                = 'X'
    IMPORTING
      SENT_TO_ALL                = W_SENT_ALL
    TABLES
      PACKING_LIST               = T_PACKING_LIST
      CONTENTS_BIN               = T_ATTACHMENT
      CONTENTS_TXT               = IT_MESSAGE
      RECEIVERS                  = T_RECEIVERS
    EXCEPTIONS
      TOO_MANY_RECEIVERS         = 1
      DOCUMENT_NOT_SENT          = 2
      DOCUMENT_TYPE_NOT_EXIST    = 3
      OPERATION_NO_AUTHORIZATION = 4
      PARAMETER_ERROR            = 5
      X_ERROR                    = 6
      ENQUEUE_ERROR              = 7
      OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.

Try this example, not sure where I got this, but it works.
report zmail_excel.
parameters: p_email   type somlreci1-receiver
                               default '[email protected]'.
data: begin of it001 occurs 0,
      bukrs type t001-bukrs,
      butxt type t001-butxt,
      end of it001.
data:   imessage type standard table of solisti1 with header line,
        iattach type standard table of solisti1 with header line,
        ipacking_list like sopcklsti1 occurs 0 with header line,
        ireceivers like somlreci1 occurs 0 with header line,
        iattachment like solisti1 occurs 0 with header line.
start-of-selection.
select bukrs butxt into table it001 from t001.
*   Populate table with detaisl to be entered into .xls file
perform build_xls_data .
* Populate message body text
clear imessage.   refresh imessage.
imessage = 'Please find attached excel file'.
append imessage.
* Send file by email as .xls speadsheet
perform send_email_with_xls tables imessage
                                      iattach
                                using p_email
                                      'Example Excel Attachment'
                                      'XLS'
                                      'TestFileName'
                                      'CompanyCodes'.
*      Form BUILD_XLS_DATA
form build_xls_data .
constants: con_cret type x value '0D', "OK for non Unicode
             con_tab type x value '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
*    con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
*    con_cret type c value cl_abap_char_utilities=>CR_LF.
concatenate 'BUKRS' 'BUTXT'
         into iattach separated by con_tab.
concatenate con_cret iattach into iattach.
append iattach.
loop at it001.
    concatenate it001-bukrs it001-butxt
           into iattach separated by con_tab.
    concatenate con_cret iattach into iattach.
    append iattach.
endloop.
endform.
*      Form SEND_EMAIL_WITH_XLS
form send_email_with_xls tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription.
data: xdocdata like sodocchgi1,
        xcnt type i.
* Fill the document data.
xdocdata-doc_size = 1.
* Populate the subject/generic message attributes
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle .
* Fill the document data and get size of attachment
clear xdocdata.
read table iattach index xcnt.
xdocdata-doc_size =
     ( xcnt - 1 ) * 255 + strlen( iattach ).
xdocdata-obj_langu = sy-langu.
xdocdata-obj_name   = 'SAPRPT'.
xdocdata-obj_descr = p_mtitle.
clear iattachment. refresh iattachment.
iattachment[] = pit_attach[].
* Describe the body of the message
clear ipacking_list. refresh ipacking_list.
ipacking_list-transf_bin = space.
ipacking_list-head_start = 1.
ipacking_list-head_num = 0.
ipacking_list-body_start = 1.
describe table imessage lines ipacking_list-body_num.
ipacking_list-doc_type = 'RAW'.
append ipacking_list.
* Create attachment notification
ipacking_list-transf_bin = 'X'.
ipacking_list-head_start = 1.
ipacking_list-head_num   = 1.
ipacking_list-body_start = 1.
describe table iattachment lines ipacking_list-body_num.
ipacking_list-doc_type   = p_format.
ipacking_list-obj_descr = p_attdescription.
ipacking_list-obj_name   = p_filename.
ipacking_list-doc_size   = ipacking_list-body_num * 255.
append ipacking_list.
* Add the recipients email address
clear ireceivers. refresh ireceivers.
ireceivers-receiver = p_email.
ireceivers-rec_type = 'U'.
ireceivers-com_type = 'INT'.
ireceivers-notif_del = 'X'.
ireceivers-notif_ndel = 'X'.
append ireceivers.
call function 'SO_DOCUMENT_SEND_API1'
       exporting
            document_data              = xdocdata
            put_in_outbox              = 'X'
            commit_work                = 'X'
       tables
            packing_list               = ipacking_list
            contents_bin               = iattachment
            contents_txt               = imessage
            receivers                  = ireceivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
endform.
Regards,
Rich Heilman

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

When I open a word document attachment in mail for IOS 7.1.1 the previous jpeg is showing on the first page. When I open the attachment from mail in mac OS X the jpeg does not appear. Can anyone help?

gonsa47 wrote:
When I open it in pages or word the correct company logo appears.
Does the mail app display whatever is in the document without the ability to differentiate between hidden or non hidden images?
The mail app will not display fillable form fields in PDF files that can be seen in real PDF apps. I say real PDF apps because the form fields in PDF apps will not appear in the iBooks app either. IMO, iBooks is not a real PDF app.
So, I would say that the mail app cannot differentiate between hidden and non hidden items

File attachement in mail adapter

Hi ,
I need to send users an error report which I have captured in the form of a file. Is it possible to attach this file as an attachement via mail adapter. I have been reading that the payload can be sent as attachment by specifying the interface namespace and interface name. But my requirement is to trigger the mail once the file has been completely written and not for every message. The reason being I could have 3000 records in the file and I dont want to send 3000 MAILS out but just 1 mail for the entire 3000 records...
Thanks,
Teresa

Hi Teresa,
I hope, I understand you right.
When you use the file-adapter for sending the file, you can without mapping send this file out to a mail receiver as attachment, there is nothing special to do.
Regards
Stefan

Need to sent alv output as html or as pdf attachment in mail

+Hello
I want to send an ALV output as attachement in html or as pdf format. how to do that? line size is greater than 600(nearly 40 fields).
+please help me in this query.
Regards
Guruvayurappan
Moderator Message: Please search before posting your question. Thread locked.
Edited by: Suhas Saha on Dec 29, 2011 4:57 PM

Hi,
For sending the ALV output as PDF attachment, you can create a spool (proper page size in print parameters) and convert the spool to PDF using the FM CONVERT_ABAPSPOOLJOB_2_PDF and then send the same as attachment in mail.
For send the data as HTML attachment, try the below FMs
WWW_ITAB_TO_HTML_HEADERS & WWW_ITAB_TO_HTML_LAYOUT to create the HTML layout
WWW_ITAB_TO_HTML to create the HTML for the actual data.
Hope this helps you.
Regards,
Sachinkumar Mehta

Attachment in mail shrinks

Hello,
When I go to place an attachment in Mail, a image or jpg, it "shrinks" the size of the file. I have a jpg which is 2048 x 1536 pixels and approx 1MB in file size but when I place it in an email using apple Mail, the file size shrinks down to 320 x 240 pixels and 156KB. There must be a setting or preference or something that is doing this? I've tried to find it but can/t...any help is much appreciated!
Thanks much!
Mike

Michael,
Part of what you are seeing is deceptive and part may be the settings.
After dragging the image to the email message, highlight the image and look down in the lower right of the message frame. You should see a little drop-down menu labeled "Image Size". If it says anything other than "Actual size" then it *+is being reduced.+*
But if it says "Actual Size" then what is sent will be full size, even though it does not appear that way within the message. When the recipient downloads the image it will be delivered full size. You can test this by sending yourself the image set to "Actual Size". Alternatively, you can CTRL-Click the image and select "Quick Look Attachment" then click the opposing arrows to expand it full screen. You will see that the image is intact and not pixilated. If the image was being reduced, a full screen Quick Look would show it pixilated.
Hope this helps. Cheers!

Missing attachment in mail Lion

Similar Messages

Maybe you are looking for