Missing audio driver after upgrade/Skype install

Hi,
A few days a ago I fresh installed Arch 64b/KDE 4.5.1 on a new PC and fully updated it.
During the installation, I remember alsa has worked fine
Yesterday I've installed Skype from repositories (inc 32b libraries), and upgraded to x-server 1.90 (as part of a full upgarde).
Ever since, upon login KDE complaints about a missing audio device (which it did NOT before), Skype offers only Pulse audio (and does NOT work), and my on board audio driver is missing.
Although on-board audio IS ENABLED at the BIOS, the on board audio modules are NOT loaded as indicated by the following:
lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
(I've an ATI 5600 PCIe graphic card which includes also an HDMI output, and an on-board Realtek ACL 889 audio controller).
Please advise how to restore full audio functionality from on-board controller?
Thanks!
MoBo is Gigabyte GA 890FX UD5

Hi mhohhman,
X230 does uses different driver with E530. Please refer followig link for driver.
Realtek High Definition Audio Driver for Windows 7 (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029024
Fred
T61 + X201i

Similar Messages

Problems with dolby advanced audio driver after upgrade on X230

Hello,
After I downloaded manually realtek audio driver version 6.0.1.6647 and upgraded it on my X230 I get following error:
actual version 7.2.8000.13 of dolby-audiodriver is installed, but the software need driver-version 7.2.7000.7. Please install a correct combination of software and driver.
I found in the net that other users got a similar error on Thinkpad E530 and a conexant driver. There it helped to de-install the driver, no reboot and run the thinkvantage upgrade tool, which repaired the problem automaticly.
I tried it in the same way, but after I de-installed the driver, the upgrade-tool didn't found any upgrade. And I have no conexant driver.
What can I do to fix this error?
Thanks for Help
Martin

Hi mhohhman,
X230 does uses different driver with E530. Please refer followig link for driver.
Realtek High Definition Audio Driver for Windows 7 (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029024
Fred
T61 + X201i

Missing application icons after upgrade to 2.0

Missing application icons after upgrading to 2.0. Tetris, Clock and Voice recording icons are missing. Looks like the applications are still installed but they are not showing up with all the other icons.
There is absolutely nothing in the help about restoring icons.
Any ideas as to how I can get these missing icons to display again?
Thanks.

Great! Where was it?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem in audio driver and unable to install rescue and recovery ver 4.3 -

Dear community collegues,
I have installed original windows7 home premium in my lenovo N100 series 0768-54A model y'day. Though every thing went well, the AC97 audio driver could not be installed. Can any one provide me a solution to make the audio working in Windows7 Home Premium.
Similarly after new installation, I could not install rescue and recovery version 4.3 (windows7 compatible) in to the system, every attempt failed. Could any one provide a solution.
thanking You.
Sakthivelu V M Chennai

I am not sure which audio chipset your N100 has, so
Try this for sound:
Go to THIS web page.
Download Soundmax audio driver for Vista.
Extract the files by double clicking, and note where they
are being extracted to.
Uninstall any sound driver you have installed, reboot.
If windows says New Hardware Found, click cancel.
Go to folder where downloaded drivers were extracted,
and run Setup.
If Soudmax drivers do not work, uninstall and repeat
with the Realtek audio drivers.
I do not think Rescue/Recovery will work except for
the originally installed OS.

InfoObject is missing in report after upgrade

Hi,
My InfoObject Statistical ID is missing in Report after Upgrading from 3.5 to 7.0.
I did comparison of report before and after upgrade and found this issue.
the data content is the same but only this infoObject cannot be seen in the report
how do I correct this issue.
thanks
Edited by: Bhat Vaidya on Aug 6, 2008 12:24 PM

This not fixed. SAP couldn't explain why

Audio issues after upgrading to OS X 10.10 (Yosemite)

Hello,
I have been facing audio issues after upgrading to OS X 10.10
- No sound in VLC
- Re-booting with Option-Command-P-R did not work
- System sounds are fine
- Quicktime Player works just fine
I tried:
- Plugging in earphones while video was playing on VLC
- F10/F11/F12 while video was playing on VLC
- Re-boot with Option-Command-P-R keys (found on a thread elsewhere)
- Played something in Garage Band (found on a thread elsewhere) and restarted VLC
None of the above solved the issue
Any one else facing similar issue with VLC on 10.10?
How did you manage to fix this?
I am running VLC 2.1.5 btw.
Thanks in advance!

Shockwave says at the present moment not to be compatible with OS X 10.9 Mavericks.
Youtube, QuickTime, all play with no sound at all.

HT203167 I am missing my audiobooks after upgrading ipod to new os

I am missing my audiobooks after upgrading ipod to new os.

Even though Apple iTunes has reached agreements with the Music and Film industries, they cannot offer Audiobooks over the Cloud.
So, when you buy an Audiobook, you must download it to your main machine and hold it there. If you upgrade your hardware (iPod, iPhone, or iPad) or IOS software, the audiobook on that device disappears and you will have to download it again from your main machine. This means wiring it up "old school" and not wifi.
As a consequence, it is advisable never to buy an audiobook from a portable device as it will not sync and will not be available for download elsewhere. I did this and I had to ask Apple to "push" a new file so that I could download it on my main machine.
Hope this helps.

Are you having problems with the Lacie external drive after upgrading to the new operating system

Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

See here for everyone discussing the issue you are having:
https://discussions.apple.com/thread/5475136?tstart=0

Lost Deskjet 5740 printer driver after upgrade.

Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

No Audio Output after Upgrading to windows 7; Soundblaster Card is installed

After upgrading to Windows 7 Ultimate (64-bit), I found that my speakers (which are built into my HP w2207 monitor) are not recognized. In the notification area I have the speaker with a red x in it, and it says “No Audio Output Device is installed”.
I have a HP Pavilion D4890Y with the Sound Blaster Audigy X-FI 24-Bit Xtreme sound card. I tried looking in Device Manager, and found “Multimedia Audio Controller” under Other, which states no drivers could be found.
I tried following some of the advice online, and downloaded the latest Realtek High Definition Audio drivers, but and the download seems to run successfully, but I don’t notice any differences. When I reboot as prompted, I’ve still got the same error.
I then tried forcing the Audio Device to use a Realtek driver, but Windows protests (saying it’s not sure it’s compatable with my device, and I end up with “Realtek High Definition Audio” under “Sound, video and game controllers”, but it has a yellow exclamation point. If I click properties, the device status says “This device cannot start (Code 10).” If I try to update the driver I get the message that it cannot find the driver software.   If I uninstall the driver I’m back to the original problem (multimedia audio controller under original devices, with no known drivers).
I also tried downloading various files from the Creative site, but it’s not clear which one to use, and the 4 or 5 different ones I tried (including their recommended beta version for Windows 7), when each of them opens it says it can’t find any supported devices.
Suggestions? Thanks!
This question was solved.
View Solution.

Hi,
"If the driver is a previous revision install it using the TROUBLESHOOT COMPATIBILITY tool that is part of the Windows 7 OS.
To use the tool, uninstall any drivers for the sound card you show listed in Control Panel/Programs/Uninstall Programs  list.  Delete the Device from Device Manager.
Download the revision of the driver from www.creative.com  website to a folder you've created and placed on your desktop.
After the driver is downloaded, navigate to the "setup.exe" of the driver and Right Click - select Troubleshoot Compatibility  ----
Let the compatibility tool select a possible solution then use its suggestion of TRY RECOMMENDED WINDOWS SETTINGS, if it does not find a solution it will submit only CUSTOMIZE SETTINGS and let you install it as you designate."
The preceding information comes from a Microsoft Windows 7 forum regarding an issue similar to yours.
the information you provided did verify that it is a sound blaster XiFi Extreme card as checked against the Vendor / Device list.
regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Envy 14-3017NR no Audio Driver After Recovery Install

Hello,
I'm looking for a help. I have performed a clean install of Windows 7 trough booting into HP Recovery Manager (F11 thing). It installed the OS and all other drivers seems to be OK except there is no driver for the audio at all (none of the built in speaker or jack-output will actually work).
I've been trying to install the audio driver from HP Support & Drivers page, from the HP recovery manager software. I have also tried to install multiple times the Intel chipset driver and then attempting the audio driver installation.. No success.
Moreover, I cannot seem to find the Beat's audio interface that was installed initially after unboxing the machine. The beats and trackpad-locking lights are also not functional on the laptop body itself... Am I missing something or what? Your response would be much appreciated! Thank you.
I'm attaching an image of the error I'm getting when installing the driver trough HP Recovery Manager software.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp57001-57500/sp57195.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then perform a hard reset for your Model as detailed in the document Here.
Next, tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Touchsmart 520 1020it - missing driver after OS re-install

After OS re-install I am missing drivers for the following HW ids
PCI\VEN_8086&DEV_1C22&SUBSYS_2AC3103C&REV_05
ACPI\ITE8715
Could you please help?

If you need drivers, please follow these steps:
1. In the Run box type devmgmt.msc.
2. Unknown devices would be listed as such and marked out with a yellow question mark.
3. Select the unknown device or other device for which you need drivers and right click to access Properties.
4. In the Properties window click on Details tab and select Device Instance Id or Hardware ID from the drop down.
5. An alphanumeric string like this PCI\VEN_1217&DEV_7130&SUBSYS_012F1025&REV_01\4&6B16D5B&0&33F0 is the identification marker for the device.
6. Please provide this number so that we can suggest the appropriate driver.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Cannot install DVD/CD ROM drive after upgrading from Windows 7

I had a working DVD/CD-ROM drive before upgrading. Now it shows as Unknown Device in Device Manager, I tried uninstalling it and then scanned for hardware changes but it still does not work. I also tried manually selecting a CD-ROM drive for it but it
ends up with an error code 31. I also checked for {4d36e965-e325-11ce-bfc1-08002be10318} registry but it did not have lowerfilters key. How do I install the driver for it?

Hi,
The error code 31 means that Windows cannot load the drivers required for this device.
Considering that this issue mostly can be caused by compatible issue.
Please check if you can fine the latest driver from Manufacturer’s website. If so, try to install it under Windows 10 compatibility mode: Right click the installer of the driver, choose Properties, choose Windows 7 under Compatibility
mode to install.
If the CD device still fails to work, I recommend to check the setupapi.dev.log under %windir%\inf, locate the device and find the line below:
dvi: Rank - 0x00000000
Then, corresponds the score in this link:
Identifier Score
http://msdn.microsoft.com/en-us/library/windows/hardware/ff546297(v=vs.85).aspx
The value 0x00003000 is the best identifier score and the value 0x00003FFF is the worst identifier score.
The score near 0x00003FFF means that the driver and device may not compatible with current system, we may need to wait for the menufacturer’s driver update.
Thanks for your understanding.
Kate Li
TechNet Community Support

Missing Audio Driver in Windows 8.1 64 bit

I have a HP Pavilion m7750n that originally was installed with Windows Vista. It's had it's hard drive replaced many times over the years, and now it's running on Windows 8.1 64 bit.
The problem is: the audio driver went missing somehow
I can't find it on Device Manager (no "Unknown Devices" show up on the menu)
The only "Sound, video, and game comtrollers" drivers that show up are:
1. Hauppauge WinTV HVR-1600
2. NVIDIA High Definition Audio
3. NVIDIA Virtual Audio Device
All of this happened after I used the "Refresh" option Windows 8 has. The right sound driver showed up on Device Manager and worked before I did this.
On sound options it says the only audio devices I have are some HDMI outputs. The only way to get sound out of my PC anymore is to hook it up to my TV from a HDMI cable connected to the HDMI port on my video card.
Does anyone know how I can find the audio driver so i can use my desktop speakers again?

Hi,
It uses "Realtek High Definition Audio" and Microsoft says it's compatible but many people say no:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Realtek%...
Please try:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
or
http://drivers.softpedia.com/get/SOUND-CARD/REALTEK/Realtek-High-Definition-Audio-Driver-6017161-for...
Other option: does it have a spare PCI/PCIe slot ? Buy a PCI or PCIe aud card and install on your machine.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to start the Dolby audio driver after updating windows 10

I am using a Lenovo Laptop G510 that came with Windows 8 preinstalled. Yesterday I updated it to Windows 10 and after that whenever I boot my pc to desktop I get an error message saying that "Unable to start the Dolby audio driver". I have already tried uninstalling and reinstalling Audio driver from my computer but still the error comes up. Does anyone know how to solve this problem? Thanks

hi Abrahamjoy,
Can you try these steps:
1. Follow this guide on how to disable automatic driver installation.
2. Press the Windows key‌ +X and choose Device Manager. On the Device Manager, navigate to
- Sound, video and game controllers > right click on Conexant SmartAudio or IDT High Definition Audio > choose uninstall > and ensure the delete the driver software for this device is checked.
3. Press the Windows key‌ +X and choose Programs and Features. On the list of apps, uninstall anything that relates to the Conexant/IDT & Dolby then reboot.
4. After the reboot, download and install the driver below (this should install the audio & dolby components)
- Audio Driver (Conexant) for Windows 10 (64-bit) - Lenovo G410, G510
When finished, you the audio & dolby settings should now work and the errors should not pop-up anymore.
Edit:
Added links
Let me know how it goes.
Regards

Missing audio driver after upgrade/Skype install

Similar Messages

Maybe you are looking for