Missing audio for .mov import

Hi,
I'm new to FCE (have been using iMovie for the last few years). Project one has involved importing a couple of mpeg files that friends have recorded on their digital still cameras. I converted the files to .mov in QTPro. The mpeg shot on an Olympus worked great - the Sony Cybershot mpeg4 file converted to .mov and plays back with audio in QT however it's silent once imported into FCE. I chose the complete movie option in QT. I also tried to import the mpeg4 file and no audio that time either. Is there something else I should try or do I need to download a plugin or simlar to make this work? Thanks for any advice you can offer!
Connie

Sorry for the delay Tom. Properties for the .mov file I created and the original MPEG file are both the same...Enabled is checked, Format is MPEG1 Muxed. I would have used whatever the defualt settings are for QTPro. Thanks for your help.

Similar Messages

Can't hear audio for movies on 1st generation ATV

Anybody know how to fix the audio while watching movies on first generation apple tv? On my apple tv, I can hear audio for music, music videos, youtube, internet radio and even movie previews! But..... when I pay for the rental download of a movie there is no audio - just visuals. I am connecting with hdmi. When I connect an apple tv 2nd generation to the same amp and tv, using same hdmi and even same power lead and same settings then there is no problem! Anybody know how I can get audio to work for movies for this?

I would suspect that it have to do with surround 5.1 settings
if you don't have such a speaker setup but have turned it on in appletv settings
the audio would likely be playing in the speakers you don't have
rather then the tv's speakers
your own material is likely not 5.1 surround but stereo
so there you dont get the problem

Missing volume for "movies" after backup.

Hi,
My problem is as follows:
I recently re-installed my 10.5 and did a TimeMachine backup restore after.
Unfortunatly the backup did not include the "movie" - folder that residents in "user". (I have a "bypass" on this folder in my TimeMachine-backup because the many gigabytes that very often gets changed in the moviefolder and I forgot to do safety-backup on it)
So.... now I dont have any "movies"-folder under "user" from the finderwindow and when I try to put a new folder there the link to "movies"-icon in finderwindow does not work. It says that "The volume for "movies" cannot be found".
How can I restore this link?
How can I get my "movie"-folder back with the original folder-icon and get it to link with icon in finder-window?
I have tried to repair the disk from installation-dvd (disk-utility) but no luck!
I´m VERY thankful for any help!
Sincerely
/Richard

I'm not sure if I've fully understood the problem.
You can certainly put a new folder into your home folder and call it Movies. Is it that you had your Movies folder in your Finder sidebar and now you find that you click on that you get an error? If so pull that icon out of the sidebar so it disappears and drag your new Movies folder to sidebar instead.
To get the proper Movie folder icon I would suggest temporarily making a new account with admin privileges. Log on to that account and it will have the OSX created Movies folder. Create a new untitled folder and change its permissions so that everyone has read and write. Then copy/paste the icon from the Movies folder to that folder. Then drop that folder into the home folder of your usual account. Now log back on as that account and copy/paste the icon from the folder you just transferred to your new movies folder. I would trash the transferred folder and empty trash before deleting the account you just created to be sure that permissions don't get stuffed up.
Of course, maybe someone knows a source for Apples standard icon suite?

Missing audio tracks when importing mp4 movie clip into adobe premier trial

I am trying to sanitize a movie clip by bleeping out the curse words in the clip. However when I import the clip on Adobe, I am missing 3/4 audio tracks; bringing the sound level way down. Can someone please assist me. I've been trying to fix it all morning!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Missing audio from DVD import

Need abit of advise,
Importing a VOB file from a DVD movie which is playing
to sound allright in QT but the audio does not follow
the movie in FCP. There appears no audio files in the
audio folder on the DVD at all.
Is there a special way to import vob movie files into
FCP pretaining the audio files or it is done differently.
Cant find anything about it.
Many thanks any advise.

Sorry for the delay Tom. Properties for the .mov file I created and the original MPEG file are both the same...Enabled is checked, Format is MPEG1 Muxed. I would have used whatever the defualt settings are for QTPro. Thanks for your help.

No audio for movie maker

I had started a movie maker project back in August, and had sound attached and working. Sound is now no longer working in movie maker. Works for everything else eg itunes, you tube, games etc. What am I doing wrong?
This question was solved.
View Solution.

Hi,
Which video maker product are you using ? And what is the Operating system of your computer ? Please try the following fix:
http://answers.microsoft.com/en-us/windowslive/forum/moviemaker-program/no-audio-during-playback-in-...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

K1 - Google Android Market Missing Tabs for Movies and Music

Am I missing something or does the Android Market on the K1 not offer Movies and Music? I have tabs for Apps and Books, but there is no way to rent movies nor buy songs through the market. As a work-around, I can go to market.android.com and rent movies and buy music, but for some reason it's not available within the Market App. Is anyone else experiencing the same thing?
Just so you know, I have a new K1, I've run all the system updates, and I'm not rooted.
Thanks in advance.

That explains the versioning of the Android Market app on K1. I thought it was odd that it was 1.0.28... whereas Google support always refer to version to Android Market version 3.3+.
I've been looking for the latest Market to get the PIN/parental controls. On a side-note/rant -- With the existing Android Market, my younger one has already made some in-app purchase charges playing with a game from GAMEVIL (BTW for K1 owners DO NOT DOWNLOAD GAMEVIL games ie AirPenguin if you have young ones. Their games make it easy to purchase items and they were not refunding it. Apparently I'm not alone if you look at the 1 start reviews. I've already lost $$$ which I'm trying to get back... In the meantime I advise anyone with Google Wallet accounts to remove their Credit Card)
Lenovo, please put an updated version of Android Market in your next update!!
Builds:
01/18/2012 - K1_A301_14_14_120109_US
01//2012 - K1_A301_13_13_111209_US
12/2011 - K1_A301_12_12_111109_US

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Original Audio for Movies in the German iTunes Store

Hey there,
I bought a movie from my german iTunes Acount. Apparently there is no original audi with it. Is there a chance to get the original audio afterwards?

That message is infuriatingly misleading. I'm being told that it is not available in the UK Store but is available in the German Store. In point of fact it isn't available anywhere.
A number of people have complained recently that it's taking a lot longer than it should for newly accepted podcasts to appear in the Store. If your feed is OK there isn't really anything you can do except wait. You could try emailing Support at podcasts 'at' apple.com but I'm afraid you will probably just get a form answer telling you how to submit a podcast (which you already know). Your feed appears to be OK.

Missing audio for one frame

Okay, been using Premiere for well over a decade now and this problem has plagued me for years. I've never found time to actually make a comment about it until now; I just would find a work around.
This has been going on since 2006, when I started using 1394 to capture video after a Matrox card went crispy. Sometimes, seemingly at random, I lose one frame of audio on clips that I capture. My captures rarely exceed 60 seconds. I usually capture some head and tail black along with a slate if available, the issue could still be happening but I can't hear it since it's quiet anyway. Here's an example:
I zoomed in on the one channel to point it out; it spans both channels. If I bring this in to Audition, the space times out to exactly one frame (0.033 seconds). If I capture the same piece again, it's possible to have another frame drop but I've never had it at the same location twice. I've had this from Premiere CS2 to 4. I'm capturing off a Panasonic AJ-D250 directly to Premiere, no third party card.
Here's the first kicker: a completely separate system using a different model (still Pan. tho) deck in the same building has the same issue. I could bring this tape to that system and get similar results.
Kicker #2: I now have a completely new computer and have upgraded to 5.5. The above was captured with that system. The system also came with a different editor on it (a major one that I am not overly fond of and won't mention here) but that captures via 1394 without this issue.
I think I can rule some things out but the common items left are: 1394 capturing, using a Panasonic deck for playback and capturing into Premiere. I've noted posts around the Internet describing the same issue dated as early as 2004.
Thoughts or ideas on how to eliminate this problem?

So no other decks Firewire capable in my building besides the Panasonics (AJ-D250's and AJ-D455's) but I came across something worth posting.
I downloaded and have been using the DVIO.exe program and have used it for about two weeks without any audio drops.
I hope to have a 1394 device here sometime to try capturing off that.

Missing audio tracks when importing raw from my PMW-350

I Have the Sony PMW-350 and i import directly to my computer from my SxS card but when i import it into PP and put it on the time line only one mono track appears and i know there should be at least 4 or more tracks

Works fine for me.
Win 7 CS6.03.
Did it work before?

Can't see external drive for movie import

Hi gang,
I have all of my iMovie projects on an external hard drive plugged directly by Firewire 2 into my MacPro. When I run iMovie 9.09, I get a beautiful sorted list of all of my projects by year. When I run iMovie 10.0.5., I can't even see the external drive that contains my movies. On the left column of the new iMovie, I have the choices of iPhoto Library, All Events, All Projects, and an iMovie Library that is empty.
How can I see my external drive with all of my long years of iMovie work on it in the new version of iMovie?
Cheers!

Just to respond to the comment above.
Disk formatting and disk access security are two different thing.
An Airport disk can be formatted as HFS+ and both Macs and PCs will be able to access it.
Regarding "Security" which you setup on the Airport Extreme there are two option:
a) "Secure Disks: With accounts": Here each user on your network will only be able to see and access the folders and files they uploaded to the Airport disk themselves. The disk (as hardware) is shared but data is not shared.
b) "With a disk password": Here all users on your network will be able to see and access all folders and files on the Airport disk.
I hope this makes things a little more clear.
Karsten

**Missing Audio when Exporting to HD**

Hi,
I have been trying to find a solution to missing audio for sometime and there are many discussions on this forum regarding this topic. I have an external drive and in the past I have lost audio, I guess because the event and the project were on different drives, I have resolved that. Also, the problem that I have is not related to the speed of a clip or that I have more than 10GB in my events (I don't). There have been other audio issues and I have always been able to resolve them but this one has me stumped! I thought that perhaps the graphics card was not up to the task but this has just happened and now I am confused.
I have just completed a project that was only 3 minutes long 403.5 MB. The movie was imported to iMovie from my video camera and listed as an Event, I also used movie clips and stills from iPhoto, I added titles and transitions. I then exported the movie to Media Browser (mobile size) so that I could import it into Garage Band to make an soundtrack. I then exported the soundtrack as an AAC to iTunes (as I have read that there are issues with MP3 and audio missing). I then opened iMovie and dragged the soundtrack into my project and republished the completed project to Media Browser in the HD size. No problem all works well, I was really happy! Onwards I thought and get another 2010 video finished, wrong!
On my next project I have done everything that I have described above, this time the project is only 349.8 MB (smaller). The audio on the HD size has failed. I have copied all the files onto my desktop and reimported everything. I have tried exporting using Quicktime or as a Movie but still no audio. I have found that the 'consolidate media' is grayed out when I have all my clips in the project editor, because they are all on my hard drive. As soon as I add the iTunes track that I have exported from Garageband the consolidate media option becomes available. If I select this I then get the message that the iTunes track cannot be copied as it is not on my hard drive! It is on my hard drive (I disconnected all external drives so that there would be no confusion!).
I cannot understand how the first project worked and the second smaller project failed using the same process! I thought that I would share this information with the forum in the hope that perhaps a solution can be found. I am able to publish the second project to my mobile me in the large and mobile sizes, it would be good to have the HD size for a DVD. There seems to be no logical pattern to the audio disappearing on export. Your thoughts or help would be very welcome.
Kind regards,
Watchthebat.

In Soundtrack if you have selected to use only channel 2 of a stereo file (right click on stereo file and select mono->channel2) you will hear channel 1 when you export. Its a massive bug.
Could that be the source of your problems? The bug can certainly create exported mixes that sound like stuff is missing.
There's a recent thread around here about this.

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Can't import audio from .mov into iMovie 10.0.3

When importing a .mov file with sound into iMovie 10.0.3, the audio does not import with the video. I have no sound. The file plays and sounds fine on the desktop. What am I doing wrong?
Macbook Pro, OSX 10.9.3. 16G Ram, 768GB SSHD 2.7GHz Intel Core i7

Hello John,
Check out the first article for some troubleshooting steps to see if anything is preventing the audio from playing properly. Also try using QuickTime to convert the video in a different format and then import it into iMovie to see if that changes things.
iMovie is missing audio on import, export, or playback
http://support.apple.com/kb/ts2289
QuickTime Player 10.x: Export a movie in another format
http://support.apple.com/kb/PH5878
Regards,
-Norm G.

Missing audio for .mov import

Similar Messages

Maybe you are looking for