Missing audio from iPhone videos?

Some videos on my iphone are missing the audio. They used to have audio, but now when I play them back they are silent. The backup copies in iPhoto also have no sound. The videos are about 2 months old. I have done the update to IOS 7 recently, however the copies in iPhoto were done prior to this and also have no audio, so I doubt its an update thing. Is there anyway to retrieve the audio, and what would make random videos on my phone lose the audio?

Hello SebastianTroen,
It sounds like you are seeing these performance issues persist between 2 different versions of the Apple TV. I would recommend that you use these troubleshooting steps from the following article, as it should help you resolve the issue:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Troubleshooting performance issues with AirPlay or AirPlay Mirroring
If you are experiencing intermittent playback or significant network lag with AirPlay or AirPlay Mirroring, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your iOS device, Apple TV or AirPort Express.
Try the following suggestions:
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

  • IPhone 4S keeps playing audio from a video file that is no longer on my phone.

    If I'm listening to music and try to change tracks or pause with the earbud buttons the music fades out and starts playing audio from a video file. It will only play about 3-4 seconds and then stop. This also will happen when double clicking the home button to try and change tracks. When I do that the track skipping buttons won't work and there's no title for the short bit of audio that plays. The only way to get music to start playing again is to go into music and press play again. The music I had been listening to is sitting there paused. The audio from the mystery video file still sometimes plays even when you're in music and the only way you would know is the little play icon at the top right part of the screen. I have removed every video off of my phone and it still does it. This is really frustrating.

    Sounds like a bad battery.  You'll need to bring the phone into Apple for evaluation.
    I'm sure you've been using your phone as designed and properly backing up your data, so you should have minimal, if any data loss should the phone need to be replaced.

  • My ATV3 will not airplay audio from iPhone unless mirroring is selected

    my ATV3 will not airplay audio from iPhone unless mirroring is selected... what am I missing? all software is up-to-date...
    my other, slightly older ATV performs as expected with my iPhone and iPad

    Hi LongbowJim,
    Thanks for visiting Apple Support Communities.
    If your iPhone doesn't AirPlay to your Apple TV as expected, start with the troubleshooting tips in the section of this article called "Troubleshooting performance issues with AirPlay or AirPlay Mirroring:"
    iOS: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/ts4215
    Best Regards,
    Jeremy

  • Recording Audio from DVD Video

    Hi,
    I have a music concert video on DVD. I would like to record a song off the video so that I can learn to play the guitar part. Is there any software out there that will separate the audio from the video, or in other words, capture the audio and maybe convert it to mp3 format so that I can play it in iTunes without playing the video?
    Sincerely,
    Jim

    Audio Hijack will let you capture audio from any running Mac Os X application.
    http://www.rogueamoeba.com/audiohijack/
    --HangTime [WIll Compute for Food] B-|>

  • Can you record the audio from a Video embedded in a pdf?

    I can't seem to find anything on this, so I will ask. A client sent us a company produced interactive pdf and wants us to use the audio from a video clip that is in the pdf. We asked for the audio clip but they don't know who to get it from and just keep saying it is in the pdf. While others try to explain that a pdf and an mp3 are not the same thing. I get to look into a fall back position of trying to extract the audio (or video). There is no copyright issue here. Client peon just can't/won't get the proper file.
    Maybe some one can help or point me to info that says it is not possible.
    Thanks.

    WireTap Studio did the trick. I downloaded a free Trial version and bob's yer uncle.
    Thanks Michael

  • Downloading audio from a video file from iTunes?

    I have a 40G 4th Gen click wheel iPod (no color or video). Is there a way to download just the audio from a video file that I have in iTunes?

    I use Steve's method all of the time, and edit the Audio output in Adobe Audition. You will want to Export/Share to PCM/WAV @ 48KHz 16-bit, and keep that format both going and coming back into PrE. Remember that you will be working with an Audio file, that is the full (or almost) Duration of the Timeline. When you Import that edited Audio file, give the program a few moments to Conform that newly Imported PCM/WAV for editing. I suggest not touching the computer, until Conforming has completed 100%, and the little progress bar in the lower-right of the GUI has disappeared. If the Imported Audio file is short, and your computer is fast, you might not even see that progress bar, but the Conforming has taken place, just the same.
    I like to keep the original Audio on its Audio Track(s), and just use Window>Audio Mixer to Mute that/those Track(s), leaving only my edited Audio on its own Track un-Muted. This is a "fail-safe," just in case I change my mind along the way, and wish to revert to the original Audio for some reason. It is much easier to Mute-Unmute, than to gather up all of that original Audio again.
    Good luck, and happy editing,
    Hunt

  • Can I  rip the audio from a video file?

    I have a video file with a band singing on it. I have an ipod nano, so I can't import the video with the singing onto my ipod. Is there anyway to rip the audio from the video file and put that onto my ipod?
    -Thanks

    Open the video in Quicktime Player.
    Select the Export menu item.
    Change the Export type to "Sound to Wave".
    Save the WAV file somewhere with the default settings.
    Load the WAV file into iTunes and use iTunes to convert it to AAC for the Nano.

  • Audio from inserted video keeps playing on next slide

    Hello,
    I'm experimenting with Adobe Presenter 6. I have inserted a
    video clip into a slide. There is a stop action on frame1 with a
    button that advances to frame2. The video has audio, which
    unfortunately keeps playing if I advance to the next slide. If I go
    once slide further ahead, the audio from the video stops. Has
    anyone else encountered this problem? It's driving me crazy!
    Thanks!

    Hi Doc!
    I actually ran into the same situation...not with a video
    clip, but with a basic flash animation that had audio in it. I'm
    not suggesting that the following will definitely work for you, but
    it might be worth taking a look at:
    Any audio that's set to "Event" while editing in Flash will
    continue to "stream" , even while navigating between slides. In
    most cases that I've seen (from my experience), audio will stop if
    the offending slide is placed immediately before a question slide.
    I realize that might not be practical in every case, so....
    1. Make sure that audio sync settings in flash are set to
    "Stream". What this does is effectively kill off any audio once you
    navigate away from the slide that has the embedded flash on it.
    2. you can always add a stopAllSounds(); method in flash, but
    that's not highly recommended
    UNLESS your content slide (with the offending flash object )
    comes immediately before, or within a range of question slides.
    Again, this too might not be entirely practical based on what
    you're trying to do.
    I realize that might not help, but as I said, it might be
    worth taking a look at how you're incorporating your video.
    Rob

  • Recording audio from Flash video

    I'm not sure if this is in the correct section, but . . .
    I would like to know how to record only the audio from Flash video. Specifically, there's a website my daughter loves which has Flash movies showing little animations with children's songs. I'd like to be able to get just the audio from those songs onto my MacBook so we don't have to go online to listen to them every time.
    Thanks.

    Audio HiJack http://www.rogueamoeba.com/audiohijackpro/

  • Problem: Audio from the video plays, but video does not show.

    Hi,
    I used the following code to play the video. The audio from the video plays displaying the player but there is no visual.
    There is no problem with the video as I have tried several other videos with .mpg and .mov extensions.
    import javax.swing.*;
    import java.awt.*;
    import javax.media.*;
    import java.awt.event.*;
    import java.net.*;
    public class MediaPanel {
        JFrame frame = new JFrame("Movie Player");
        static Player player = null;
        public MediaPanel(){
            try{ // method using URL
                URL url=new URL("file",null,"c:\\temp\\A.mpg");
                player = Manager.createRealizedPlayer(url);
            } catch( Exception e) {
                System.out.println(" Unable to create the audioPlayer :" + e );
            Component control = player.getControlPanelComponent();
            frame.getContentPane().add( control, BorderLayout.CENTER);
            frame.addWindowListener( new WindowAdapter() {
                public void windowClosing(WindowEvent we) {
                    MediaPanel.stop();
                    System.exit(0);
            frame.pack();
            frame.setSize( new Dimension(600,600) );
            frame.setVisible(true);
            player.start();
        public static void stop(){
            player.stop();
            player.close();
        public static void main( String args[]){
            MediaPanel panel = new MediaPanel();
    }

    use this code "Component control = player.getVisualComponent(); "
    instead of this code " Component control = player.getControlPanelComponent();"
    But if you want show both of them, modify as following
    Component control1 = player.getControlPanelComponent();
    Component control2 = player.getVisualComponent();
    then add the two control (control1 & control2 ) to your JFrame panel

  • Separating audio from the video

    I'm new to this version of iMovie. I only knew how to use an older one from high school, I don't know which version that was, but it had three bars at the bottom to place video and audio files.
    Anyway, I need to know how to separate the audio from a video file while still being able to keep the video clip. Plus, how do you adjust the volume of only certain clips, like for it to start off quiet, but gradually increase in volume?
    Thanks!

    [See this blog post for instructions|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-cli p.html]
    This all becomes much simpler in iMovie 09.
    For working with Audio [see this tutorial|http://www.apple.com/findouthow/movies/imovie08.html#tutorial=audiocli ps]

  • How do I get audio from mp4 video to stop playing on other slides? URGENT

    I have imported an mp4 video into my Captivate file, and it plays well. But when I get to slides after that one, the audio from the video file repeats on several other slides. How do I get this ugly behavior to stop?
    I don't want to unsync the audio and video because it could get out of sync on playback.
    Please advise ASAP. I am supposed to be handing this in tomorrow and have spent countless hours doing workarounds on this project already...
    Thank you very much for any help you can give me.
    Ellen

    Hello Ellen,
    What is your Captivate version and what option did you choose to insert the video?
    If it is Captivate 6, Can you use the Multi Slide Synchonize video. If it is a Previous version, can you select the Video and from properties choose to synchronize with project?
    Does the audio play on other slides when you jump from an incomplete video to other slides or when you view the complete video and then move to rest of the slides.
    Thanks,
    Anjaneai

  • Cannot hear audio from internet video. Can hear DVD. Help!

    Cannot hear audio from internet video.  Can hear DVD.  I don't know what I changed in msconfig start up.

    Hi,
    The first thing I would suggest is to run through the guide by Daniel_Potyrala on the link below to completely uninstall and then reinstall the Flash Player Plug-in.
    http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/The-solution-to-most-problems-with-the-Flash...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I take the audio from a video and divide it into separate songs

    How do I take the audio from a video file and divide it into separate audio songs? I then want to export those songs into itunes.

    http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • After I detach audio from the video, and I go to delete the video portion but keep the audio, it deletes both. Am I doing something wrong?

    Hello Everyone!
    I would appreciate your support if you can. I know how to detach the audio from a video clip. Once this is done I wanted to add another video shot (B-roll) over the audio I detached. When I go to delete the video (which is detached form the audio) It deletes both of them automatically.
    Is there something I am doing wrong? Do I need to unpin the audio somehow?
    Thanks again.
    RJ

    Hey I found the info I needed. I decided to show it to anyone else who may be looking for this same answer.
    http://www.youtube.com/watch?v=xmP0mUKsJwU

Maybe you are looking for