Missing audio tracks when importing raw from my PMW-350

I Have the Sony PMW-350 and i import directly to my computer from my SxS card but when i import it into PP and put it on the time line only one mono track appears and i know there should be at least 4 or more tracks

Works fine for me.
Win 7 CS6.03.
Did it work before?

Similar Messages

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Missing audio tracks when importing mp4 movie clip into adobe premier trial

I am trying to sanitize a movie clip by bleeping out the curse words in the clip. However when I import the clip on Adobe, I am missing 3/4 audio tracks; bringing the sound level way down. Can someone please assist me. I've been trying to fix it all morning!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Losing Audio Tracks When importing from 5.1 to 3

I was capturing video on one of the new intel imacs in FCP 5.1. Afterwards I'm importing the files into a project on my powerbook g4 with FCP 3. For some reason I only get 1 audio track when I import the files.
The files on my imac all say 1V and 2A and have the two separate audio tracks. But when I import them on my laptop I get only 1V and 1A. I've tried everything I can think of and changed all the settings I can but can't figure this one out. Can anybody help me?

This has been posted by others in the past, there seems to be changes in FCP 5 and/or QuickTime that make its media not fully-readable by earlier revs of FCP.
I would recapture in FCP 3.

How can I 'join' audio tracks when importing audio book?

HELP!!
In the latest version of iTunes, 11.0.1, I can't find the 'JOIN Tracks' button which is needed when importing an audio CD to keep each disc treated as one book instead of storing each chapter as a separte entry. Without this, I can't find a way to keep the chapters to play in proper order as each CD, starts with chapter 01.
Thank you for your help

Join CD tracks
When you import songs from a CD into iTunes, you can group songs so they always play together (even when you’re shuffling songs).
Insert an audio CD into your computer’s CD or DVD drive, and click No in the window that appears.
When the songs on the CD appear in the iTunes window, hold down the Shift key to select the ones you want to join.
Click near the top-right of the iTunes window, and choose Join CD Tracks.
http://support.apple.com/kb/PH12278

Locating audio tracks when Importing OMF

I have just imported an OMF from another Logic session. All my audio tracks are in the media folder and all the audio regions are in the session page in their correct places.
But the audio isn't synced up to the regions, is there any way of not doing it manually as I have over 2000 files.
Or is there something I can do when importing the OMF's to make sure this doesn't happen.
I just started a new session straight from the OMF when this happened.
I am now importing the OMF from an open session.
Any advice greatly appreciated

This has been posted by others in the past, there seems to be changes in FCP 5 and/or QuickTime that make its media not fully-readable by earlier revs of FCP.
I would recapture in FCP 3.

Crashing when importing RAW from disc?

I'm going through the somewhat drawn-out process of exporting all of my photos to DVD and re-importing them, to merge my libraries, now that iPhoto can handle so many images.
However, I'm finding that iPhoto 6 crashes repeatably when some RAW images (.nef files from a Nikon D50) are imported from disc.
Interestingly, if I export the image to a file (still RAW) and re-import it with drag-n-drop, it's fine; it seems the problem is limited to when you're importing from an iPhoto library on disc.
Is anyone else seeing this?

Same problem, same circumstances except for the camera (D70). The only way I see to merge libraries is to drag the "Originals" folders from iPhoto created DVD to the library. But it results in loosing all the editing, keywords, comments and so on .

Why can't I separate audio tracks when I import clips from an sd card into FCP 7

Why Can't I separate audio tracks when I import sd card files into fcp 7?

You need to ask this on the Final Cut Studio forum
http://discussions.apple.com/forum.jspa?forumID=939

How can I turn off the sound from the original midi or audio tracks when I turned on the duplicate tracks for editing ?

How can I turn off the sound from the original midi or audio tracks when I edit or listen to the duplicate tracks in Logic Pro 9 ?
I'm using iMac desktop with Mac OS X Version 10.7.3. Pls advise.

Dan,
It sounds like one of your preferences has changed.
Go to preferences > audio > general, and make sure "track mute/solo" is set to "CPU saving (slow response)". It is probably set to "Fast " at the moment.
This setting (fast) basically causes immediate muting from the channel strip while your song is in play. This is because the audio is still being read from the hard drive, but the channel strip is simply muted.... like a hardware mixer. When set to "CPU saving", the audio from that track, when muted, is actually stopped from streaming from the hard drive, but there is a couple second delay before the audio is actually muted.
One would think that the fast setting is generally preferable, except when you need to do what you are doing. The only way to keep duplicate copies of channel strips acting independent of one another is to leave this setting on the "CPU saving" setting.
Hope that helps

What happens to Raw files when importing Raw+JPG from camera to Lightroom Mobile on iPad? Only JPGs are showing up.

Hey I am Brian, and I was wondering how Lightroom mobile works again as in when importing photos directly into iPad using the camera connection kit.? This is for IPad 2. I . Like when importing raw files. now I just did a photo shoot. and I just uploaded them into lightroom 5 on desktop. the raw files are being pushed as smart priviews acroos ipad and iphone. its kinda cool seeing cr2 file showing up on lightroom mobile. when its coming from lightroom 5. but what about coming from camera to ipad.?
I thought you can import a Raw plus jpeg into ipad and it shows up as a jpeg plus raw file. well its not doing that. shows up as just jpeg.
cant wait for next update of lighroom mobile.

With this version of LR Mobile we not support the direct RAW import.
You can vote for this feature request...Lightroom mobile: Ability to import raw files
- Guido

When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

When importing raw photos from Nikon D90 aperture seems to automatically adjust exposure darker. why? How can I stop this?

This is typical of the default NEF RAW conversion of Aperture and the best thing you can do is set up a few presets to apply to all of your RAW images to get a tone curve and colors that is pleasing to you as a default. The in camera JPEGs / embedded JPEGs (that you first see during import) are treated to the Nikon "Picture Control" settings that are set on the camera - the RAW's as interpreted by Aperture are not.
I have written extensively and even have a few downloadable presets on my site - look for NEF...
http://photo.rwboyer.com/
RB

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my UBS microphone?

With Adobe Premier Elements 13 can I add my own audio tracks by pulling music from my files and by using my USB microphone?

larryh
Please remind us on what computer operating system your Premiere Elements 13 is running
Using your own music.....
Yes, with important but.....
Details
If your music is from iTunes, more than likely you will get some sort of error message from the program when you try to import the iTunes music into Premiere Elements (most versions including 13). In that case, please convert the iTunes music to the wav version in iTunes using the following iTunes instructions.
iTunes: How to convert a song to a different file format - Apple Support
If you are getting program error message using Premiere Elements 13 Add Media/Files and Folder with other than iTunes music, please give the source and properties of that music.
Using USB Microphone....Not recommended by Adobe....See Adobe ReMe
Details
As for Premiere Elements narration clips using the its Narration Tool
1. Adobe documentation indicates the USB microphone do not work in Premiere Elements and suggest the use of microphones that connect to the computer via computer jack.
But, there are some scattered cases where the user has found a USB microphone that has worked for him or her.
2. Be sure to check Edit Menu/Preferences/Audio Hardware ASIO settings to assure that Input and Output are enabled.
3. There have been reports (Premiere Elements several versions) where addition of narration using the Narration Tool results in loss of pre-existing
sound on numbered audio track clips and soundtrack.
ATR Premiere Elements Troubleshooting: PE12: Audio Losses After Narration Addition
4. In my particular Premiere Elements 13 on Windows 8.1 64 bit, I have found that I need to set the Mic Sensitivity all the way to the left to avoid
serious audio distortion.
I have tried to give you an overview to avoid surprises if you have not used the features that you pointed to in your thread question. Please let me know if you need further information.
Thank you.
ATR

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th

Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?

No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size?

When importing RAW files in Photoshop why does camera raw 8.6 only import 1 size from canon 5d mark iii, in older versions I used to be able to import the files as larger images. It use to have a number of options for the images size. The option now is smaller than the maximum size used to be.

You know what - I'm sorry
I'd had a crazy long all-nighter session sorting out images for a client, then decided - when I should have simply gone to bed - to set up the new photoshop. At the very start I made a silly mistake, tried to sort it out then decided to call it a day, responding to your remarks with the problem still in my head but feeling more and more tired.
Responded again to your comment earlier with the problem still in my head but not in front of me on the screen - however with a fresh head I just turned it all on, opened up PS and today could instantly see what was going on - Oops!
Thank you for being patient with a sleep deprived photographer who must have been getting annoying yesterday
I am officially embarrassed
M

Develop settings when importing RAW + jpeg

When importing NEF files from my D700 I apply the landscape sharpening pre-set and am happy with the results. However on my Fuji X20 I import RAW+jpeg rather than just RAW, in this situation if I use the landscape sharpening pre-set sharpening is applied to the jpeg as well as the RAW resulting in the already sharpened in camera jpeg being grossly over sharpened. If on the other hand I use none for the develop pr-set no sharpening or noise reduction is applied to the jpeg and a minimum amount applied to the RAW file, more or less what I want except I want the higher landscape sharpening applied to the RAW files. Is there anyway to modify the built in pre-sets so that they only get applied to the RAW files when importing RAW+jpeg pairs?
Dave Rosser

I believe the answer is No, you cannot apply a preset at Import time based on file type.
What you can do is after you import, filter on File Type and set it to JPG and apply another preset that changes the sharpening settings of the filtered set of files, then go back and turn off the filter and work with both sets of images as you want.
To filter by File Type, you need to go to Library Grid, enable the filter bar with the backslash \ key if necessary, then select Metadata, and either change one of the existing filter columns to say File Type or add a new File Type column.
Once you have created and applied the filter, you can save it as a filter preset that can be applied by the filter preset selector at the very right and just above the thumbnail strip at the bottom, even in Develop mode.
You might make one for raw and for jpg in case you want to swap between the two, and if you shoot JPGs with more than one camera model, you can add the camera model to the filter criteria.

Missing audio tracks when importing raw from my PMW-350

Similar Messages

Maybe you are looking for