Missing audio tracks.

Can anybody help? I have made a movie where I have tuned the volume down on almost all of the clips and just set it to background music. However there are three clips where I want the audio to be heard so you can hear the persons commentary. When I play it in the editing window and in preview it works, but whenever I burn a dvd it leaves the audio off????? It worked ages ago when I made the movie using PE3, but I'm now running PE8 and re-jigging my old movies.

it's only when I burn it to dvd & play it on the telly that the Audio 1 tracks are lost.
OK, Audio is good in PrE, but not on the burned DVD via a set-top player.
First, what brand of blank media did you burn to? Verbatim & Taiyo Yuden are the brands that I recommend. Many, like Memorex and Ritek buy from the cheapest source, and then rebrand the blanks. In a spindle of 100, there might be discs from 4 different mfgr's. One can get some good blanks, and then the rest in that spindle will not play.
Second, can you test play on your computer with a DVD software player? How does it play there?
Good luck,
Hunt

Similar Messages

Missing Audio track controls (fader, solo, mute, sends, inserts etc...)

After doing a "save as project" I ended up with 2 big problems. When I pull the song off the CDR and open it up on my computer the controls for some audio tracks are missing. I lose anything having to do with track control such as input, output, fade, solo, pan, inserts, buses, mute, record. The only thing i can see is the group assignment and automation pull down menus. The other problem i have is that i have to manually relink all the audio files. Why can't the session file find the audio files??? They are all in the audio files folder right next to the session file. Arg. i am running logic pro 7 and the computer that the "save project" was completed on is running logic 6 express 6.4.0.

I'll take a stab at it.
Sounds like your parameters are not viewed. In the arrange window menus - there should be a view menu and it allows you select what things to see for each track.
Maybe view parameters or view channel strip only settings may help.
Not sitting in front of Logic at the moment.
May have something to do with goign from L6 to L7,but i'm only guessing on that one.
hope this helps
B
G5 1.8/ 3GB Ram Logic Pro 7.1.1 Mac OS X (10.4.6)

H.264 export, randomly missing audio tracks

Came across a strange issue when exporting a 1080p timeline using the H.264 export option. The first export had some strange video flickering issue, but the audio was fine. So I re-exported and switched to CBR instead of 2 pass VBR. On the 2nd export, the footage looked fine but for some reason tracks 3 and 4 which contained background audio, were not in the exported file, just silence. The thing that concerns me is the only encoding option I changed was the bitrate, and going from VBR to CBR, everything else stayed the same in the 2 exports. I have no idea why Premiere would mysteriously drop 2 of my audio tracks. Has this happened to anyone else? This problem has happened to me before, both with the flickering and missing audio. I've tried the usual updating to current version of Premiere, clearing preferences, etc. and still running into this.

I work in Broadcasting and we use Quicktime HD 1080i h264 with no problems. Plus the file sizes are just amazing (Less than 100mg for a 30 seconds)

Missing audio tracks when importing mp4 movie clip into adobe premier trial

I am trying to sanitize a movie clip by bleeping out the curse words in the clip. However when I import the clip on Adobe, I am missing 3/4 audio tracks; bringing the sound level way down. Can someone please assist me. I've been trying to fix it all morning!!

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download

Premiere Pro CC and missing audio tracks for .mts files

Hello guys,
I used to edit my .mts files with Premiere Pro CC without any issues until yesterday.
Now I import my .mts file (made with a Sony VG900) but Premiere doesn't recognize the audio tracks (that I can hear just fine with VLC).
I tried changing the extension in .m2ts but it didn't work, I also tried reinstalling Premiere but, again, it didn't work and I tried (I was desperate) to install Premiere CS6 just to check if maybe the problem was just about the CC version. Guess what? It didn't work...
I tried also converting the file with Encoder in .mp4 but after the conversion I can't hear the audio with VLC and, of course, it doesn't work on Premiere.
Do you think it's a Premiere issue or a file problem?
I used those same files for other videos (like this one http://www.youtube.com/watch?v=H1X5vsZ-5yI) and I had no problems. Then I updated Premiere, I moved the files in other folder and the problem came to life.
Any idea?
(I'm waiting for my colleague to send me a new mts file just to check if I accidentally damanged the old ones).

A similar problem here..... although......
Take a look at this screenshot
As you will see, the blue marked audio is repeated audio of less than on sec. Certainly not the way it has been recorded.
I think I've got the answer........ (working with Premiere Pro CC, always up to date, Mac OX 10.9.2; Camera: Sony HXR NX3)
1. Don't copy but clone your flash card to the location where to edit on your hard drive. At the same time: alt+click on external flash card, draw it onto your hard drive location.
(or use carbon copy cloner, which I use for backup and transferring avchd files).
2. Don't import regularly via the import dialogue box (cmd-i). Instead: use the mediabrowser browser, locate the map "private" (as often standard named),
3. Via cmd-a (select all): select all videofiles.
4. click right mouse button and select import.
This way, all the video and audio files will be imported.
If however you have alreade re-used your camera flash card for recordings and don't have access to the 'corrupted' files to be imported into your project, you won't be able to solve the problem. You just lost some of the essential data which were not copied onto your Mac.
This solution I found for my problem may well be the one you are looking for........
Another solution might be to convert the compressed avchd - before importing into your project - into uncompressed .mov filed. However...... you will lose data so this is not exactly what I would prefer if the former described workflow does fix the problem for you.
Please let me know if this works for you or not.
Good luck!
Regards,
Peter

Missing Audio Track on playback after "Share" or "Render"

OK, I am tearing my hair out on this one:
Premiere Elements 4
I have captured a bunch of clips (with their own associated audio) from my DV Camera
I have added music.
Few title screens and transitions.
Once I hit the "share" thing, or the render thing, when I play back the resulting file on my PC I only get the music audio!
The audio associated with the clips is not there.
I have tried doing different sorts of share formats (i.e. to AVI, to MPEG, to WMV, etc) and it is still the same
In the Timeline both tracks are NOT muted.
The Clip audio is not too low (i've read the trouble shooting guide).
I tried sharing just a captured clip (i.e. didn't add in any music), and the native audio came through on that one, so the problem is probably not with how I imported the clip or anything. Basically it just seems like when I have 2 audio tracks, one a music track and the other the audio from the video recording, only the music clips are added into the final file, but the audio from the clips themselves is omitted somehow!
Help!

When you say you're capturing DV, can you confirm that you're capturing over FireWire from a miniDV camcorder and that you're using Premiere Elements to do the capture?
Also, does your camcorder have a dubbing feature for adding narration to already recorded video?
There are other possibilities (such as the possibility that you have your camcorder audio set to something other than 12-bit 48K sampling), but we need to know what we're dealing with first.

Missing audio track when importing video into Premiere Pro CS3

When I import my M2TS video into the editor there is no audio when viewed in the source. There is also no audio track when I drag a clip down to the timeline. Any fix for this?

I have the same problem with M2TS files in Adobe Premiere Pro CS4. The audio track is there - Adobe Premiere just doesn't recognize it. If you open the same clip in Nero Showtime, Corel Ulead VideoStudio, etc., the audio will be there. The audio is probably multiplexed.
I have been recording High Definition TV using the Hauppauge HD PVR 1212. About 15-20 % of the M2TS files recorded will be seen as video only clips by Adobe Premiere. The remaining clips will be conformed by Premiere and you will have a Dolby Digital 5.1 audio track. If you convert the video only clips to .MP4 and then re-import them into Premiere you will then have the Dolby Digital 5.1 audio track back and you're good to go.
I use either Xilisoft or Arcsoft media converters to change to .MP4 files. If you use Arcsoft you will have to render the clip. The files converted by Xilisoft don't have to be rendered for playback.

Missing audio tracks when importing raw from my PMW-350

I Have the Sony PMW-350 and i import directly to my computer from my SxS card but when i import it into PP and put it on the time line only one mono track appears and i know there should be at least 4 or more tracks

Works fine for me.
Win 7 CS6.03.
Did it work before?

Encore CS3 - Hangs and import problems with menus and avi footage with audio tracks present.

I'm trying to import some footage files in .avi format into Encore CS3 and am having several problems.
In what follows when I say "crash" I mean Encore quits with a standard Windows error. When I say "hang" I mean Encore does not quit but rather becomes an unresponsive process that must be killed manually using Windows Task Manager.
My System:
WinXP Pro SP2
2.93 GHz Intel Celeron CPU - single core
Intel PERL mobo
3GB 400MHz RAM
NVidia 7800GS video
I mention these specs however I am not experiencing any hardware
related bugs or issues (like out of memory or video driver crashes
etc) when using any CS3 app.
The footage files (as reported by GSpot) and problems I am seeing. In all cases GSpot reports that I have the appropriate codec installed:
footage1.avi - Dx50 XVid 1.0.3, Dolby AC3 48kHz 192kb/s, 716834 KB
Attempting to import as timeline causes Encore CS3 to hang.
Importing as an Asset allows it to import but when I try to click
on it in the project windown to add it to a new empty timeline,
Encore hangs. It plays fine in Windows Media Player.
footage2.avi - Dx50 XVid 1.0.3, MPEG-1 Layer 3 48kHz 128kb/s, 718302 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no audio.
footage3.avi - Dx50 XVid 1.0.3, MPEG1-Layer3 48kHz 112kb/s, 717606 KB
Imports fine as either a timeline or asset but no audio track comes
with it, even though there is an audio track in the footage. It plays
fine in Windows Media Player. Video imports perfectly, just no
audio. I tried converting this one using AVS to both MPEG3 and DivX,
each using MPEG1-Layer3 44kHz 192kb/s audio, and got the same issue
upon importing into Encore CS3. I also loaded it into Camtasia
Studio and it looked fine over there. The audio was present and I
was able to export it as a .WAV file. When I tried looking at the
file in Soundbooth CS3, there was no audio track or, more
accurately, the audio track was a flat line.
By way of comparison these are importing perfectly:
footage4.avi - XVID XviD 1.1.0 Beta2, MPEG1-Layer3 48kHz 189kb/s Two mono
channels LAME3.96r, 717436 KB.
footage5.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage6.avi - XVID XviD 1.1.0 Final, Dolby AC3 48kHz 448kb/s Six
channels (3/2 .1), 716418 KB.
footage7.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717502 KB
footage8.avi - XVID XviD 1.0.3, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 717180 KB
footage9.avi - XVID XviD 1.1.2 Final, Dolby AC3 48kHz 448kb/s 6 channels
(3/2 .1), 2291904 KB
Although this one imported & transcoded correctly, when I went to
build it to a DVD image file I got some strange errors during the
"planning video" stage that prevented the process from completing.
Unfortunately I neglected to write down the error message I recieved
which read like quite nonsensical babble to me, and I have since
deleted the project folder. I remember it was not a memory or
display related error and it included a timestamp where the error
was happening. I played the footage in the preview panel thru the
identified timestamp but it previewed perfectly without even a
jitter in either the video or audio. Took forever to transcode so I
doubt I'll be doing this one again anytime soon.
Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the

Another issue I am having is with the motion menus. I burned a DVD and it does not load correctly in one of my DVD players (a Sony rdr-gx330 recorder/player). It appears to take extra time to recognize the disk, the startup (first-play) menu does not show automatically, and I must press the Main Menu button on the remote control to make it appear. Other than that it seems to play ok in that player. Also tested it in 2 other DVD players (a Panasonic and Zenith) and it worked just fine like it's supposed to in them. Also plays perfectly in my computer's DVD player/burner using Windows Media Player v10. I tried burning to Memorex +RW single-layer single-sided disks at 6, 7, & 8Mbps project settings but got the exact same result every time.
Encore CS3 crashes fairly often during authoring, particularly during imports, and when I go to edit things like calling up a timeline in the timeline panel, dragging footage into an existing timeline, or changing button links in a menu etc.. I have also experienced seemingly random hangs even more often, probably 5 or 6 times as often as a crash. Saving the project after every little change I make, then closing and restarting Encore allows me to make progress albeit at a significantly reduced workflow rate. Accessing Photoshop from Encore appears to be working flawlessly so far aside from the slow load times. Encore hangs sometimes during video transcoding, repeat the process and it works ok. If I try to import a menu from the library after importing my footage files, Encore hangs trying to import it either at the 50% mark or the 99% mark (it varies even with the same exact menu selected from the library). If I import the menu first and the footage after, then no problems. Also trying to render motion menus after importing footage causes Encore to hang, render before footage import and everything works ok. Interestingly enough, previewing my project in Encore's monitor or preview panels works perfectly even in High quality mode -- in fact it operates quite smoothly in comparison to other apps I have tried. Although those footage files that had missing audio tracks on import obviously played silently, I have yet to experience a hang or crash during a preview or when scrubbing through a timeline in the monitor panel.
The last problem I've seen is with the project cache files. It doesn't always get rid of cache files when stuff is deleted from the project. I was working on one project and surprisingly ran out of disk space. When I tracked it down I found that there were some two dozen copies of a footage file I had repeatedly imported and deleted from the project still sitting in the cache folder. The file was an avi about 2GB so it was taking up some 40 GB of disk space for stuff that was no longer in the project. I tried shutting down Encore and manually deleting all the cache files, and that worked for most of them, but there was one 2GB file that kept reappearing in the cache folder even though it was no longer in the project. The XML file in the cache folder still had references to it in there so I can only assume that was the reason it kept showing up. I eventually had to delete and totally recreate the project from scratch to regain my lost disk space. This included having to sit thru a 6 hour long transcoding session which pissed me off to no end.
Encore CS3 appears on the surface to be a very powerful, feature rich, and approachable app with a simple easy to use interface, but it is awfully bugged in just about every area I have explored and still needs lots and lots of work for it to be really useful. Frankly for me it is pretty damn annoying that I have invested so much money in this suite only to find several of the apps in it (Encore & Premiere in particular) behaving this poorly. In my opinion every single app in the suite exhibits lousy performance whenever you must do anything at all involving the disk from the time you click to start it up until the time you click to close it down. Several of them are just as seriously bugged as Encore too, and being a long time Photoshop v5.5 user I expected much more from Adobe. Even Photoshop is two or three times as slow now (e.g. it takes about 20-30 seconds to simply create an empty 500x500 pixel image file and almost a full minute to load a 30x60 pixel single-layer gif). So far I have attempted to create 6 DVDs using Encore and after 3 weeks of effort have only succeeded in getting one of them onto a final disk -- and that one is kinda limping to work correctly in my DVD player. Three of those projects became so corrupted while working on them that I had to delete them completely and recreate them from scratch, only to find that I still couldn't get them to completion for one reason or another. Seriously disappointing.

Missing Some Audio Tracks from Premeire Queue'd videos

Hi I am useing Premeire CC 2014 to Queue some videos that have 4-8 tracks of audio. They play fine in Premeire. When I Queue the clips in AME CC 2014 and then render them with a H264 codec transcode, I am only getting the last track (Music) in the outputted video. I am missing the voice over tracks.
Not sure why this is happening? Any suggestions. I am using the Audio Track Mixer with Submixes and effects on the Submix in Premiere. Perhaps there is an issue with this.
Thanks
DB

It can be done with QuickTime Pro
<http://store.apple.com/us/product/D3380Z/A>
"Show Movie Properties" in "Window" menu, detete the unwanted track, then "Save" in "File" menu.
You may need to install Perian
<http://www.perian.org>

Audio tracks suddenly missing from capture... need help!

Hi! I have been capturing video (with audio) successfully and routinely for months now. Suddenly, though, when I capture video... from the same device, with the same preset... the clips have only 1 Video track, and no Audio tracks. My camera is still recording audio (and I still hear it during the capture), but the audio tracks just aren't there in the resultant clip. It seems to me like FCE has just decided not to capture audio, as if to say "pffft... we don't need that." But why this happened is beyond me!
Even within this same project, I have other clips captured with audio just fine. I didn't even realize it was an option NOT to capture audio. There aren't any settings to that effect in the Capture window... i.e. there's nothing to turn OFF, so I don't know how to turn it back ON! HELP! How do I get audio back on my captured clips? Is there a way to toggle this? How can I possibly be getting video without audio when the preset has already been working for this device?
Things seemed to change once I started using the Voice Over tool. After that, none of my captured clips have audio. Something I did on or around that time changed FCE internally. I combed through the manual but didn't see any leads. They assume if you have the right preset, it'll just work. No mention of disabling audio.
Please help, because I'm just about ready to throw my Mac throw the wall. I even tried reinstalling FCE, just to get it back to the previous state, but it didn't help.
P.S. I also haven't changed anything on my camera that would affect audio. I feel this is just a setting somewhere in FCE that I can't find and don't even know where to look for it...
Thanks in advance!!

Hi. Where should I look for them? I haven't had much success finding things on my own, so please spell it out for me.
I just find this so odd... it would be one thing for the tracks to be silent or garbled, then I would think this was a cable issue or the camera. But I can't even imagine why the audio tracks would just not be there. If I saw a preference for "Video Only Capture" somewhere, it would make sense.
Anyway, thanks. Please tell me where there's a prefs file, and I'll roast it.

Audio tracks missing in the timeline viewer

Hello,
I am using Imovie 4.0.1 and have been working on a project for several months and now towards the homestretch, I have lost the ability to see the audio tracks that I added to the project. I am referring to the 2nd and 3rd tracks on the timeline viewer. This isn't a killer as I have completed all of my editing and am ready to export it to my camera (to then reimport, seperate audio, and then lock--to make sure audio and video matches up) The problem is that when I export to the camera, the audio comes and goes, and some of the video stutters at times. It seems that this all might be related. Has my imovie become corrupted? All of the projects that I have worked on in the past--that are still on this computer--exhibit the same thing i.e. I can't see the audio tracks and the editing arrows (and other items) have disappeared from underneath the viewing area.
I would appreciate any help.
jg

com.apple.imovie3.plist is what you should have found because you are using imovie 4.
And, a new .plist should have been made by imovie when you re-launched it-so that's OK.
Sounds like you have enough HD space...are you sure you are using the Timeline viewer and not the Clip viewer?
The Clip viewer looks like this:
And the Timeline viewer looks like this:
(But these are screen shots from imovie 5 so don't let that confuse you).
Sue

Audio tracks missing from footage

I was working on a project in the trial version using some footage I shot, and after I switched over to the full version, the audio tracks had completely disappeared. Moreover, much of the footage is listed as 'media offline' in the project itself, but when I reinsert the footage in a new project, it works just fine (except for the audio).
Please help!

Audio tracks missing when doing automate to sequence.

Using PMW200 with 4 audio tracks. When dragging single file to timeline I get the 4 audio tracks. But when I do an automate to sequence, I only get 1 audio track, plus, the default audio transition is not going on.
I have all the tracks highlighted and have ticked apply audio and video transitions.
Any idea where I'm going wrong? Thanks
Mike Ward

Hi Kevin. I uploaded a clip onto you tube for you to try, but you tube mixed the audio tracks so it was useless.
Basically, drag any video clip with 4 audio tracks recorded from camera onto timeline in cs6, and all audio tracks appear on the timeline. But automate several similar tracks to timeline and only one audio track gets added. The other 3 do not appear. Is there a work around for this, rather than dragging all on one at a time.
Thanks

Premiere Pro CC Audio Track Titles Missing

Since updating to Premiere Pro CC from CS6, I lost the audio titles at the top of each audio track in the timeline. These were important for me to stay organized and for my workflow. Is there a way to get them back?

Hi Brandon163,
Please check on the right top corner you will notice a magnifying glass icon which is spotlight.
Click on it and type Audio midi setup which will populate in the list click on it to open.
Once you open it you will get Premiere Pro 7.0 or 8.0 whichever version you have.
Please check this link.
http://support.apple.com/kb/PH5176
Regards,
Vinay

Missing audio tracks.

Similar Messages

Maybe you are looking for