Missing Audio when Converting from MPEG1 Muxed to Ipod using QT Pro 7
I just got my video iPod over Christmas. After reading up on QT Pro 7, I purchased it over the weekend, and have attempted unsuccessfully the past two nights to convert home videos (taken with my Sony digital camera) to iPod format. My home movies play fine when I open them in Quicktime; however, when I export to the iPod format (and also when I export to mpeg4 format), I only get the video and not the audio.
I've confirmed that my key for QT Pro 7 is successfully loaded, so that's not the issue.
I've also confirmed that the format of the original video taken from my camera is "MPEG1 Muxed". Several internet discussion boards seem to indicate that missing audio is a common problem for people using Sony cameras and Quicktime. If this is the case, I'd prefer to simply refund my money and buy one of the other video to iPod converters available on the web.
So, either help me solve this problem, or help me get a refund. I'm fine either way.
-- Chief1Pat
QT does not export the sound when exporting from muxed mpegs (mpeg-1 or mpeg-2). QT Mpeg Limitations
You should be able to export both sound and video with this Windows freeware:
http://www.videora.com/en-us/Converter/iPod/
Similar Messages
-
Loss of sound when converting from MPEG1 to DV
Is it possible to import sound and video into FCP 5 from a MPEG 1 movie accidentally recorded on the memory stick in my digital camcorder. The video transfers well as .mov but I can't get any sound to transfer. It works perfectly as a file on the desktop played through the Quicktime Player but the file loses the sound when imported into FCP5. Any suggestions?
Thanks in advance.
Mac Mimi 2
G4, G5 Mac OS X (10.4.7)most likely you need to demux the file (untangle the audio and video). MPEG Streamclip is a good way to go to do this.
Export as a Quicktime DV-NTSC or DV-PAL (depending on your part of the world) and all should be good.
Cheers,
x -
Missing audio when sending from FCP
When I send my project to Soundtrack Pro from FCP, Soundtrack opens and loads everything up, but oddly some audio clips show no waveform, and contain no sound, but the sound is clearly present and working in FCP.
What could be causing this?mrjam, I am having the same exact problem. I have a sequence in FCP and am using the "send to "Soundtrack Pro Multitrack Project" command. I have tried this almost 30 times now and only twice has it worked properly, i have no clue what was different these two time and tried to repeat the process the exact same way to no avail. What a pain. I have no clue why this function doesn't work. I have a mono pair in FCP and when i "Send to.." there are no waveforms in STP at all, and of course, no audio. Funny thing is it did work twice! Sounds like a major bug! Have you had any luck?
-
Losing Audio when converting videos to work on IPOD
Hello,
I have loads of small home videos I took using a pretty basic Hewlet Packard Camera. They are just MPG files and when I dragged them over into ITUNES then tried to sync them into my IPOD it did'nt work.
I followed the instructions and used the option in the advanced settings to convert them into an IPOD version which seemed to work. However when I sync'd then over to my IPOD they transferred across and look fine but have no audio.
Does anyone know if it's possible to sort this or are the video clips just not completely compatible.
Thanks
Craig.Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(36872) -
How can I keep the formatting when converting from Word to pages?
How can I keep the formatting when converting from Word to pages?
Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
Regards,
Barry -
When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe. -
Missing Audio When Burning A DVD For Grandma
I've created a short 8 minute video with an audio track on top of it. The 8 minutes consists of a 2 minute video opening created in quicktime. 4 minute slide show imported from iPhoto and 2 minutes of closing credits created in iMovie. The 8 minute soundtrack was created in garage band using several iTunes tracks. (I'M TRYING TO BE ALL APPLE!!)
Everything looks great when I preview in iDVD. However, when I burn the dvd the audio drops out about 3 minutes into the video and then starts up again at the very end (out of synch of course).
I've tried everything I can think of - created an image in iDVD and burned using disc utilities , swapped out the audio tracks, changed the photos...still nothing works.
Any suggestions?? We have a first birthday coming up and we really want to get this to Grandma. Thanks.Hi
Can be audio from iTunes or strange file formats eg .mp3 etc.
iTunes - Copy out as an Audio-CD .aiff
Other audio formats - convert to .aiff 48kHz 16-bit
Use this and it most probably works.
Yours Bengt W -
BSP Exception: Missing reference when converting data object ZZxx
Hi there,
I have created these new Z fields and tried to include them in a field group. These fields did appear, but they are highlighted with a red box, with the above text in the tool tip.
Does anyone know what it means??
ThanksI believe they were generated by EEWB - or could've been added manually to the CRMD_CUSTOMER_H. This error only occurs on the Currency fields...something to do with reference field but I just can't find what is wrong with this. I searched up SAP notes and found the following the closest match: -
<b>Symptom</b>
when trying to scroll down in the result list in the F4 for the Ibase the error error "BSP exception : Missing reference when converting data object amount. Correct the entry" occurs.
<b>Other terms</b>
CRMT_BSP_IBASE_TREE_NF, data object amount
<b>Reason and Prerequisites</b>
This happens due to inconsistancy in structure
<b>Solution</b>
Please follow the below steps manually.
1. Go to tx:SE11
2. Select data type "CRMT_BSP_IBASE_TREE_NF" in change mode
3. Select component AMOUNT in 'Components' tab
4. Go to "Currency/quantity fields" tab
5. Replace 'Reference table' entry from 'CRMT_BSP_IBASE_DETAIL'
to 'CRMT_BSP_IBASE_TREE_NF'
6. Save and activate -
Overflow when converting from "1.64174e+11"
Hi ,
I am working on PS module and facing the above mentioned error.Whenever I am attching any material haveing value more than Rs 100000 the system gives "Overflow when converting from "1.64174e+11""
The detailed error description is given below,
Runtime Errors CONVT_OVERFLOW
Except. CX_SY_CONVERSION_OVERFLOW
Date and Time 24.11.2008 11:19:23
Short dump has not been completely stored (too big)
Short text
Overflow when converting from "1.64174e+11"
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFV45P" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "KALKULATIONSWERT_UEBERNEHMEN" "(FORM)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "1.64174e+11", an overflow occurred.
Missing RAISING Clause in Interface
Program SAPFV45P
Include FV45PF0K_KALKULATIONSWERT_UEBE
Row 8
Module type (FORM)
Module Name KALKULATIONSWERT_UEBERNEHMEN
Trigger Location of Exception
Program SAPFV45P
Include FV45PF0K_KALKULATIONSWERT_UEBE
Row 140
Module type (FORM)
Module Name KALKULATIONSWERT_UEBERNEHMEN
Source Code Extract
Line SourceCde
110 MTCOM-MATNR = VBAP-MATNR.
111 MTCOM-BWTAR = VBAP-BWTAR.
112 CALL FUNCTION 'MATERIAL_READ'
113 EXPORTING
114 SCHLUESSEL = MTCOM
115 IMPORTING
116 MATDATEN = MBEW
117 EXCEPTIONS
118 ERROR_MESSAGE = 04
119 OTHERS = 04.
120 MOVE SY-SUBRC TO SAV_SUBRC.
121 ENDIF.
122
123 IF T685A-KRECH = 'C'.
124 IF SAV_SUBRC = 0 AND MBEW-PEINH NE 0.
125 KOMV-KPEIN = MBEW-PEINH.
126 ELSE.
127 KOMV-KPEIN = 1.
128 ENDIF.
129 * Falls keine ET da, Zielmenge nehmen (Gut-/Lastschrift, Kontrakt ...)
130 DATA: DA_MENGE LIKE VBAP-KWMENG.
131 IF TVAP-ETERL EQ SPACE AND VBAP-KWMENG = 0.
132 DA_MENGE = VBAP-ZMENG.
133 ELSE.
134 DA_MENGE = VBAP-KWMENG.
135 ENDIF.
136 IF DA_MENGE > 0.
137 DA_WERT = DA_WERT * KOMV-KPEIN * 1000
138 / DA_MENGE * VBAP-UMVKN / VBAP-UMVKZ.
139 ENDIF.
>>>>> KOMV-KBETR = DA_WERT.
141 ELSEIF T685A-KRECH = 'B'.
142 KOMV-KBETR = DA_WERT.
143 ELSE.
144 KOMV-KWERT = DA_WERT.
145 ENDIF.
146
147 KOMV-WAERS = DA_KALKO-FWAER.
148 RV45A-KOEIN = DA_KALKO-FWAER.
149 KOMV-KMEIN = VBAP-MEINS.
150 PERFORM KOMV_PRUEFEN USING SPACE
151 CHANGING SY-SUBRC.
152 * Nur für den ersten Lauf prüfen, ob Status gesetzt werden muß
153 IF SAV_INDEX = 1.
154 DA_SUBRC = SY-SUBRC.
155 ENDIF.
156 IF SY-SUBRC = 0.
157 PERFORM KOMV_BEARBEITEN.
158 ENDIF.
159 ENDDO.
Pl suggest.
RgdsHi,
Try to declare your variable using Packed Number:
DATA: va_num TYPE P DECIMALS 3.
Hope this helps.
Patrick -
No audio when exporting from mpeg to flv
We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?How are you determining that the FLV has no audio? Are you playing it back in VLC Player or importing it into Flash?
Also, do you see a full range of formats on the system where you don't hear audio? If some formats are missing this might be a licensing issue. Also check if AME recognizes audio on the MPEG source (hover over it in the queue and look for audio info in the tool tip). -
Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student -
How do I maintain column formatting when converting from PDF to Excel?
How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.
Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription. -
Default PR Type when convert from Planned Order
Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
AndrewHi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM -
Moving Scriptlet Code to backing bean when converting from JSP - Facelets
Hello!
We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
I do appreciate the response!
Eg of a jsp page:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
<%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
<%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
<%@ page import="com.kkee.util.*"%>
<%
AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
if (advancedSearchFormManagedBean == null) {
advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
advancedSearchFormManagedBean.setQuickSearch();
request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
%>
<h:form id="MYCenterForm">
<p:portletRenderer portletSetName="test of portlet"
portletContainer="#{PortletContainerManagedBean}"
id="MYCenter"
portletScope = "TEST_SCOPE"
suppressIfNoData="true"
portletSkinName="SOME_SKIN">
<f:facet name="persistenceToolkit">
<h:commandLink id="persistenceToolkitLink"
actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
<h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
</h:commandLink>
</f:facet>
</p:pagePortletSetRenderer>
</h:form>
<%
String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
if("1".equals(flag)){
ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
if(rt!=null){
rt.setDesc("my cle loaded");
long now = System.currentTimeMillis();
long start = rt.getStart() + rt.getTotal();
rt.setInterval(now-start);
rt.setTotal(rt.getTotal()+rt.getInterval());
LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
session.setAttribute("responseTime", rt);
%>That helps.
This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
<h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
<l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
</h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
javax.servlet.ServletException: Index: 0, Size: 0
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.RangeCheck(ArrayList.java:547)
at java.util.ArrayList.get(ArrayList.java:322)
at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
... 22 more
********** Message End *************Thanks -
Overflow when converting from "3.60001e+11"
Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Occurred on 03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM
Maybe you are looking for
-
Earth with USB & message that phone will work for emergency use only
I had problems with poor reception and people telling me that I kept cutting in and out, or that I sounded like I was talking underwater. Happened only after I upgraded my 16g 2g from 1.1.4 to 2.1. Husband has a 3g on 2.1 and has no problems, so area
-
How does the CRM to BW extraction takes place...????
Hi Experts, i need a detailed explaination about crm-bw extraction. what are the steps followed & pre-requisites required. how it will be different from other extractions...??? cheers swaps
-
Installing a Timer in Whiteboard
This is my assignment. Please someone guide me how... This is urgent. Have a timer on the upper left hand corner that counts down in military time. The input is in minutes. Example, say "eric" logs in as account "a" and waits in the virtual whiteboar
-
Exit from FPM application to non-FPM application
Hi Experts, In my custom project (ABAP Webdynpros), I have created homepage screen using non-FPM webdynpro application. When I click any link on homepage, Iu2019m calling 2nd screen (FPM application) using exit plugs and this is working fine. In FPM
-
How to check in IDCS4 the rgb images?
Apparently the Preflight panel does not consider this option and the links option (which shows this condition) is a calamity because you have to touch photo by photo and the vertical arrows to speed the process do not work at all...