Missing authorization for the plant - Message no. ME303
Missing authorization for the plant - Message no. ME303
I am getting the above error while creating the PO.
what is the cause of error?
How do I rectify this?
I have used the right data, till yday it was working fine. I doubt some config change has happened
Hi,
Check with your basis consultant whether the authorization is change ?
Regards,
Chetan.
Similar Messages
-
Missing authorization for plant ' '
User is missing authorization for plant ' '
User trace gives the following missing authorization
Object:
M_IS_WERKS RC=4 MCINF=S039;WERKS=' '
Can anybody help me out to find the meaning of space( ' ' ) in plant or any field?
thank you in advace* Prüfung, ob Berechtigung für die Werke existiert
SELECT * FROM T001W INTO TABLE AW_HLP_T001W
WHERE WERKS IN AW_WERKS.
DESCRIBE TABLE AW_WERKS LINES SY-TFILL.
IF SY-TFILL > 0.
FLG_SELECT = 'X'.
ENDIF.
<b> clear aw_hlp_t001w-werks. " note 124769, ver.04
collect aw_hlp_t001w. " note 124769, ver.04</b>
LOOP AT AW_HLP_T001W.
AUTHORITY-CHECK OBJECT 'M_IS_WERKS'
ID 'MCINF' FIELD AW_MCINF
ID 'WERKS' FIELD AW_HLP_T001W-WERKS.
There must be a reason to add an empty line, which causes the silly authority check. As far as I understand Note 124769 you have got to add plant ' '. See Note 408003: ."Create an authorization for the authorization object M_IS_WERKS which contains the value WERK = . Refer to Note 124769." -
You have no authorization for the requested data. Message no. UPC217
Hi All,
When i execute a BPS planning function i am getting the following error.
'You have no authorization for the requested data. Message no. UPC217'
Plz let me know how to rectify the problem asap.
Thank you all in advance
KiranHello,
Your Function/level makes use of an authorization relevant InfoObject without restriction (or at least no restrictions enough).
Check that the Level is restricted correctly regarding the authorizations.
regards, -
CK40N error: Missing authorization for BOM (SAP Error: CK-581)
Hi Experts,
When running CK40N, I found an error message Missing authorization for BOM (SAP Error: CK-581).
If this is the problem of my CK40N that make object cannot be costed, how can I solve this? Is this relate to SAP authorizartion?
Thanks.
sbmelHello,
While doing Costing run CK40N or Cost estimate CK11N, you require having authorization of T. Code CS03 for the plant in your SAP ID as it explodes BOM.
Kindly contact basis team & take the authorization on your SAP ID.
Regards,
Anand -
Missing authorization for processing condition
Hi All,
We are having a problem with our pricing procedure zxxx.
we created a pricing procedure and connect it to a java formula.
this formula return an error message :
" Missing authorization for processing condition zxxx "
in debug we see that this message come from the formula and not some kind of authorization check.
( even a user with "sap all" get this message ).
does any one know how to solve this?
or:
does any one know how to debug the java formula ?
thanks,
Lilach.Hi,
Check with your basis consultant whether the authorization is change ?
Regards,
Chetan. -
Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
VijayHi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar -
EDMS: 'Missing authorization for this functionality' when searching user
Hi,
I've activated ALC authorization for DMS. In EDMS, when trying to add an user to a DIR with search function an error occurres as below.
'Missing authorization for this functionality'
BTW, the user has contains SAP_ALL profile. It can't be any authorization reasons.
Regards,
YemiHi,
authorization checks will not happen if the search help from sap-gui.I
think the problem is releted to missing implementation of "check
function module" from your side. If the search help is linked to a
"master data table" (type A) a check function must be implemented to
check the permission of the user.
This function module is read from table BAPIF4T. Please
check the following link: http://help.sa
p.com/saphelp_nw04/helpdata/en/a5/3eca044ac011d189
4e0000e829fbbd/content.htm
http://wiki.sdn.sap.com/wiki/display/PLM/Object+Link+search+in+EasyDMS
Regards,
Hari -
No authorization for the component (query name)!
Hello all,
when i am publishing the query in web, the following error message is displayed!
"No authorization for the component (query name)!"
i had installed and configured everything here, so the person responsible for authorization is none other than me. what i shud do now? shud i add any other authorization profile to the username created? or still any configuartion is required?
please let me know!
Thanks,
RaviHi ARK,
thanks for the info.
i had assigned SAP_ALL and SAP_NEW profiles to the user.
let me say clearly that when i am executing the Query in the designer it is working fine,no issues in Bex browser too. but when i want to publish safely exexuted query in web (clicking the button publish the query in web) i am getting the above mentioned error!
do suggest me what is the authorization profile that is needed to serve my purpose?
hope this time i am clear!
Ravi -
Doesnot ask for access key. error No authorization for the 'S_DEVELOP'
Hi,
After applying patches,in transaction F-43 one of the field Inv Recd Date( BSEG-ZOLLD) is not getting displayed.
after analzing we found that ZOLLD is not there in screen SAPMF05A(0302).
in my development server when i try to change the screen it says "You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned"
my profiles contains sap_all and sap_new rights even then I am getting this error.
Why doesnt it ask for access key ?
Kindly guide me .
Regard> Please check in Su24, if iy has S_develop object or not,
In SU24? why? and what or who is "iy"?
> since you say you have SAP_ALL access please regenerate SAP_ALL its a composite profile this should work fine.
What does the fact that it is a composite profile matter? Besides that I've already made a remark about regenerating it.
> But you need to check at SU24 against f-43 whether S_develop missing or not,if missing please insert manually
Ehm, do you really think the SU24 settings for a transaction influence the changeability of it's underlying screens/programs etc? It will not matter at all what you do with S_DEVELOP in SU24. -
BPS You have no authorization for the requested data
We are implementing Hierarchy node based security for our BPS.
When the user tries to display the planning layout, they get the error message "You have no authorization for the requested data "
I have given authorization to the relavant Infocubes, also checked the all the Authorization Relavant Info Objects and added theses Info Object to the custom authorization created in RSECADMIN.
Also added the info objects 0TCAACTVT, 0TCAIPROV, 0TCAVALID to the custom authorization.
In pfcg, this authorization has been added to S_RS_AUTH. I have also given activity 02, 03, 16 values and a * to planning areas, functions, packages, groups, levels, folders, ... to the objects R_AREA
R_BUNDLE
R_METHOD
R_PACKAGE
R_PARAM
R_PLEVEL
R_PM_NAME
R_PROFILE
But still we get the same error.
Has anyone encountered this problem? Can you please provide me some clues to resolve this issueThank you very much Grevaz, but that template does not help.
I did run both ST01 trace and BI RSECADMIN trace. RSECADMIN Trace shows the below authorization failure
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR BETWEEN '4012001000'
AND '4012001999'
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Partially Authorized (Average) Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Quantity
Characteristic Contents
0FUNDS_CTR
0TCAACTVT
SQL Format:
FUNDS_CTR > '4012001000'
AND FUNDS_CTR <= '4012001999'
AND NOT FUNDS_CTR IN ('4012001001','4012001002','4012001003','4012001004','4012001005','4012001006','4012001007','4012001008','4012001009','4012001010')
AND TCAACTVT = '03'
Characteristic Contents
0FUNDS_CTR Node 1 I EQ #
I EQ :
0TCAACTVT I EQ 02
I EQ 03
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
206 ( 0FUNDS_CTR )
Authorization Check Complete
We have created custom authorization and trying to restrict based on hierarchy node.
One point I observed is, when I give access to all nodes with a wildcard * in the custom authorization, then the error disappears and the layout is visble. But our point here is to try to restrict based on the nodes and we cannot give display access to all nodes. -
No Authorization for Planning plant in MIGO
Hi Gurus,
I have an issue for the Goods Receipt for multiple line items of account assigned( F) PO.
When user try to receive goods thru MIGO, system throws an error (dump) saying "NO AUTHORIZATION FOR PLANNING PLANT XXX" even though roles are assigned to the user.
I went thru the OSS note 385830 but it hardly helped me.
Pls throw some light on the issue...
Regards
ShashidharHi,
Check for the Authorization Object that system is referring for the error in SU53 transaction. You may process the transaction and once the error comes, go to transaction SU53 check for the Authorization object there.
You can check the roles available for a given authorization object in SUIM transaction. -
Missing authorizations for authorization object UIU_COMP
I have generated the pfcg role for a business role using report CRMD_UI_ROLE_PREPARE and assigned the pfcg role to a user.
The user is apparently able to perform navigation as required. However, when a ST01 trace is run for the user, there are few missing authorizations for UIU_COMP. Could anyone please explain the reason for this? No changes have been made to object UIU_COMP i.e. only values generated by the report is present there. Should the missing authorizations be added manually to the role?I would recomend that you define for component UIU_COMP in your pfcg role full access (all set to *), because this authorization object is used for access to web ui components. Even thou if you define this object to full access users will still see just components defined in business role.
Regards. -
Creating Authorization for multiple plants
Hi,
I have one requirement that, Creating Authorization for multiple plants
SELECT-OPTIONS: s_werks FOR mseg-werks.
AUTHORITY-CHECK OBJECT 'M_MSEG_WMB'
ID 'ACTVT' FIELD '03'
ID 'WERKS' FIELD s_werks.
1. If have no of plants in s_werks then how to authorize the plants?
2.if i dont enter any plant in my selection screen how to authorize that?
3. if i have 5 plant only then how i can authorize those perticular plants only?
Thanks in advance,
Thanks,
DP.S_WERKS is not a field; it's a set of fields. Use simple ABAP to select your plants and loop at the selection(s) to check...
-
Hi
I have made one report, I needed to check the authorization for the report, how to do it.
Eg. One employee is executing the report, he only needed to select his transaction
If somebody from one sales organisation, they only needed to take the data belongs to the sales office.
SELECT-OPTIONS: p_vkorg FOR tvkot-vkorg.
SELECT-OPTIONS: p_pernr FOR pa0001-pernr
for example two selection parameter is displaying. if my employee no is 100, while trying to enter execute the report for 200 employee no. no data should show. like that vkorg filed also should work.
Please let me know how it possible.
Regards
Sebastian JohnHi,
You can change the code below
*---Authorization for Company code entered by the users.
*---This code will restrict users to see data for company
*---codes which they are not authorized to.
*---Select all the company codes based upon selection entered by the
*---user
SELECT bukrs
FROM t001
INTO TABLE li_bukrs
WHERE bukrs IN z_bukrs.
IF sy-subrc EQ 0.
*---Clear Screen variable for Company code
CLEAR z_bukrs.
REFRESH z_bukrs.
*---Filter and prepare Select options for Company code table to be
*---passed to query. Table will only have values of company codes he is
*---authorized to for display.
LOOP AT li_bukrs INTO lwa_bukrs.
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
ID 'BUKRS' FIELD lwa_bukrs
ID 'ACTVT' FIELD '03'.
IF sy-subrc = 0.
z_bukrs-sign = 'I'.
z_bukrs-option = 'EQ'.
z_bukrs-low = lwa_bukrs.
z_bukrs-high = space.
APPEND z_bukrs.
ELSE.
lv_flag = 'X'.
ENDIF.
ENDLOOP.
*---Give warning message to the user in case he is not authorized to see
*---data for all the company codes that he has entered.
IF lv_flag = 'X'.
MESSAGE ID 'ZFNG' TYPE 'W' NUMBER '015'.
ENDIF.
ENDIF.
This code does an authorization check at company code level and removes all the company codes that user has entered but is not authorized to look for. After that we pass the filtered list of company codes for which user is authorized to in the select query and fetch the results. You can first select all the records from database for PERNR and VKORG. Then filter them and prepare new list of VKORG and PERNR after performing authorization check and pass it further to select queries in your program.
KR Jaideep, -
Hello ,
For my user id, I have the authorization for the transaction, but still iam getting the error that, you don’t have authorization, plz suggest?????
ThnksHello Sampath,
after you have received the error message about the no authorization, run transaction SU53.
This transaction shows which authorization has failed last time.
Best regards,
Laszlo
Maybe you are looking for
-
When I try to play albums or artists or any other catagories on my itunes library my iphone 3GS will only repeat the first song over and over and will not go on to the other songs. This just started. It won't random or play through the whole album or
-
Help... Please can someone tell me how to cancel skype, I have not used skype since february as conection was really bad, I cancelled in my account and closed account, every month since skype are still taking payment from pay pal, i followed paypals
-
Set Nvidia Quadro 1000M as primary card.
Hello all. I have issue with Nvidia Quadro card 1000M on Windows 8. I set discrete graphic in bios and saved settings. But on Windows startup at login screen it goes black and only helps to restart and set it back to optimus or integrated. How to set
-
[CS2/CS3] - Resizable dialog window
Hello, I would like to create resizable dialog window with only few widgets, please does anybody have some sample of resources, how to do it or some link ? Thank you for all answers, marxin
-
Having trouble opening flash help/f1 in cs6
This is so stupid I can't get any help I need from any one I don't know what I am even doing here. I have tried to contact adobe but all they want you to do is join or become a member of their boards and that is it. I am having trouble opening flash