Missing "Basic" Settings.

The "Basic" adjustments in my Devellpe Module have disappeared. can anyone tell me haow to get them back?

What seems puzzling to me is the number of people who have had this problem since switching to Lightroom 5. It seems like it comes up almost on a daily basis. Haven't seen that before.

Similar Messages

Basic settings tab missing from Develop module

I recently bought lightroom 4 after using the free 30 day trial, and i have no basic settings on my mac, can't find them anywhere? My tabs go from histogram to colour curve. Where are they?
Very confused..
Message title was edited by: Brett N

No need to be confused, you've probably inadvertently hidden it. The thing is that in every Module, all the individual panels in each of the left and right-hand columns can be optionally shown or hidden under user control (there are few minor exceptions such as the Navigator, but by and large this control is available throughtout Lightroom).
So to bring up the options for each column (in your case the right-hand column of the Develop Module), simply right-click (ctrl-click on Mac) on ANY of the headers that are showing in that column and you'll see a pop-up context menu like the attached screenshot. Here you can see that I've previously hidden the Basic panel, so all I need to do is click on the Basic line and it's restored. Conversely, I can use this method to hide a panel.

Basic settings missing

Hello, all.
II have just installed Lightroom 2. I have a problem in that the "basic" settings do not appear in the develop module. Does anyone know how to make them visable?
thanks,
Copemys

Hal,
thanks very much. That must have been the only area I didn't click on. Minimizing the fields helped.
best,
Copemys

Where are the basic settings in develop module?

Since updating to lighroom 3 using a MacPro running Snow Leopard I seem to be missing all the 'basic' settings on my develop module namely exposure, white balance etc. All the other adjustment settings are there. Any idea how to fix this?

When you are in the develop module, right-click in the right-hand panel and make sure there is a checkmark next to the basic settings. If there isn't just click on basic settings. Then it will show in the panel. The different areas are designed so that you can hide any that you don't use.

When i try to sync my phone, it says i should get ios5.1 but will lose my data except basic settings. How do i back it all up before getting new software if it wont let me sync? I am worried about the photos.

I have been trying to sync my phone, but it says i need to get the new software ios 5.1, but in doing this I will lose some things purchased on my phone which arent on itunes, and I should transfer them It also says something about apps and that i will only be able to store basic settings like contacts and texts. How can i back my phone up before installing this software update, and what do i do about my photos?
Thanks

Read the User's Guide... it covers how to backup and sync the device as designed.

My data tab is missing in settings on ipad

My data tab is missing in "settings" on my ipad

What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

I want to change the settings (brightness, contrast, gamma) for my internal cam on Macbook pro. I find having to but a third party software (iglasses, webcam settings) to control basic settings as unnecessary and exploitative. Does anyone have a solution?

It is not about payment of $19.95 (Igalsses) or $7.99(webcam settings). This is a very basic setting that should be available in the system settings. The automatic setting of the internal cam does not work great on low lighting as everyone is aware.
i am just amazed how users take in lying down and suggest solutions such as paying for a 3rd party paid app or improving the lighting in your room.

Basic Settings for new BW QA Box

Hi All,
i got a problem in BW QA.
The BW QA server was a new one. I have created new requests for all the master data infosources and transported them sucessfully.
The problem is when i opening the infopackage which was transported to QA i am getting a popup with "Caution ! - The transfer method has changed" and when i see in the infopack the processing method was changed to ALE and i could'nt see the PSA option there. The infopack in Dev was with psa.
This is the case with all the infopacks in QA.
Do i need to do any settings as this is a New QA box.
Can anyone send me the basic settings need to done for the new BW qa box document.
Thanks in Advance
Appreciated with Rewards

Ram,
have you created the source systems in QA - that should be done and when you transfer - make sure you have also transferred the datasource ...
Arun
Hope it helps...

Premiere Basic Settings for MTS

A bit new to Premiere but coming up to speed fast. I have scoured the forums and docs for the following basic questions but have come up empty. However, I am still unclear on what to use for the basic settings for my project to get me the best results. Basically I want to create the project in Premiere and output it as an NTSC DVD via Encore. I have .MTS files from a Canon HG21 shot as either MXP (1920x1080) for some projects and SP (1440x1080) for others and so when I start a project, I:
leave the Project presets but select the Capture Format as HDV
not sure what to set for the Sequence presets.
Would love any guidanceor pointers to the rights docs. Thanks!

I guess the HG21 is an AVCHD camera, it definitely is not HDV. You should use sequence settings that reflect the majority of your material. If 2/3 of your material was shot at 1920 x 1080, use that as the sequence setting and just use the rest of your material in that sequence.

Check List for TTE Basic Settings

HELLO guys..
Can anybody send the check list for TTE Basic settings
Thanks in advance
Regards
vamshi

Yes I have. At this point, that's all I have. I can't change any settings via Computer since the computer doesn't seem to know that the AX exists.
Any other ideas?

Basic Settings for BADI

Hi All,
I would like to set BADI to transmit contracts from SRM to MM and I am going >>>Customizing under BADi --> Follow on documents --> Create Contract in back-end but then I do not know how to move.
Could you please explain me basic settings for BADI.How to set and configure ?
Thanks in Advance,
#Bill J.

Bill,
Hi. You would only implement this BADI if you would like to modify the functionality/values of the contract interface to MM.
To do this proceed as follows:-
1) Press the execute button (As per you navigation in SPRO mentioned).
2) Specify an implementation name (Start with a Z or Y) - press enter (You will need a developers key from service.sap.com)
3) Give the implementation a name and SAVE to a transport package
4) Select the interfaces table and navigate (double click) on the method applicable (CONTRACT_INTERFACE_FILL or CONTRACT_PROCESS_TYPE_FILL)
5) Enter the code you would like SAVE & activate.
6) Go back to the implementation (F3 to go back) and activate the implementation (CTRL-F3).
7) Test and if this works transport the development through the landscape.
Cheers
Rob

Basic settings not sticky when changing the process version

Yes, I understand that process 2010 will not use the same basic settings as 2012 as they have different adjustments but, If I make adjustments in 2012 and then try and see what 2010 would do and then go back to 2012 the adjustments I previously made in 2012 are zeroed out? I guess I'd like to be be able to see a compairson between the two processes so I can understand the differences between 2010 and 2012.

Make a virtual copy....develop one using PV2010, the other using PV2012.

Basic Settings for Lifecycle planning

Hello All,
I want to maintain the basic settings of Life Cycle Planning to use Like Profile
Transaction: /SAPAPO/MSDP_FCST1 - Lifecycle Planning
My question is; is it a must to use 9AMATNR and 9ALOCNO characteristics in our POS?
I have seen the sentence below in OSS note: 354660
**If you are using a characteristic for a product and do not want to use the 9AMATNR characteristic, you must specify the characteristic you would like to use.The 9AMATNR characteristic must exist in the planning object structure if you want to use it as a characteristic for a product.Only then can a LIKE profile be used.In this regard, see the information on the /SAPAPO/FCST_LIKE user parameter in note 350065.**
What I understand from this sentence is that 9AMATNR is not an obligatory characteristic to use in POS for the purpose of life cycle planning.
However when I do not use 9AMATNR I receive such an error message during the maintenance of Basic Settings for Life Cycle Planning.
*Errors have been found in your Customizing settings
*For detailed information, see consulting note #354660
*The basic settings cannot be saved
*Characteristic for product 9AMATNR is not in the planning object structur
So, does anybody know if is it a MUST to keep the 9AMATNR in the POS for lifecycle planning? May be I am doing wrong something else...
Thanks in advance

While in DP MPOS you are free to choose custom characteristics for location and product, there are certain DP functionalities like Promotion Planning which normally uses 9AMATNR as characteristic for Product. In such cases the DP MPOS in absence of 9AMATNR has an issue. Through this assignment of location and product in the MPOS, system knows the custom characteristic that needs to be mapped to 9AMATNR and 9ALOCNO for product and location.
This is useful during release from DP to SNP also.
Hope this helps.
Thanks,
somnath

Basic Settings before HR Org Structure

Hello
What are the basic settings required in Entreprise Structure (FI/CO) before you actually start creating an Org Structure in HR. Can you please provide step by step process.
Thanks
HR Infant

hai u need to create Company code as it is the duty of FICO guys
steps Enterprise Structure-financial accounting-definition
in this structuer u willl define the compay code

Username/password to access basic settings

I am trying to connect a Lexmark wireless router to my LAN and have been unable to do so thus far. Lexmark's installation wizard suggested changing the channel on my LAN. When I tried accessing my basic settings, I could not find the correct username/pw combo
I had always left my username and password at factory settings ie admin/blank. I think I changed it as the result of a much larger conversation with Liksys tech support. Whatever the case may be, it is no longer admin/blank nor can I open the settings with any other of the usual combinations I've used elsewhere.
I can't get customer or technical support because a convoluted effort to install a Linksys music bridge along with an new N-series router resulted in my eventually going back to my old WRTG2 v.1 series router (and throwing hundreds of $ away on Linksys products). This router is out of warranty and I cannot get any type of support aside from recommedations to use their paid support products. I even tried that spending $40 on Network Magic, which I had to uninstall bnecause ot didn't work as well as Linksys Easy Support.
If anyone can help with either or both issues; connecting Lexmark printer wirelessly and/or resetting username AND password w/o currently being sure of either, I would greatly appreciate it. I have gotten extremely frustrated with the usual channels of support. Thanks for any help. Bill

Hello boomer619,
Thanks for posting. With Acrobat.com each user account have a
designated username and password to log in with for their account.
Is this not the username and password you are referring to?
Are you needing them to log in using it? or just reference it
so you know who the form is coming from?
As far as setting up password protection within a PDF file in
Acrobat 9, you may want to ask this question in the Windows Acrobat
forums, since these are specific to Acrobat.com.
Link to
Acrobat Forums
Thanks!
Pete

Missing "Basic" Settings.

Similar Messages

Maybe you are looking for