Missing Benefit Plan in HRBEN0001 in one client but not in another.

Hi All,
I was wondering if anyone has stumbled upon this issue where your benefits configuration are identical in three clients. I have configured two savings plans - 401K and Roth which the employee is allowed to make changes anytime. In two DEV clients, I was able to see both savigns plan in HRBEN0001 and 401K in QA but not the Roth. I've compared the configuration and the dates and they are correct (and identical).
I went back into QA and hired a new test employee and the Roth plan appears in HRBEN0001. My question is: why didn't the Roth plan appeared for the employees that were previously hired. Is there a table that needs to be activated in QA?
Your help is much appreciated! Thanks!

Hi Donna,
Could you please tell how did you resolve this issue as I am facing same problem. I have configured 3 pension plans which are not reflecting under HRBEN0001. Appreciate your help.
Regards,
Purnima

Similar Messages

Airplay works for one user but not for another on the same machine

I have the problem where airplay works for one user but not for another and both users are on the same machine. For the user where it does not work, everything appears normal, it's just that there is no sound being transmitted. I have tried restarting the Airport express, restarting iTunes, repairing disk permissions. Any ideas about what can be done to resolve this?

my /etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,hans,ibm,gast
ftp::11:
mail::12:
uucp:x:14:
log::19:root
locate:x:21:
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:ibm,gast
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:gast
dbus:x:81:
hans:x:1001:
vboxusers:x:108:hans
policykit:x:1002:
hal:x:82:
kvm:x:78:
nx:x:85:nx
avahi:x:84:
camera:x:97:
gdm:x:1003:
gast:x:1004:

WDTHEMEROOT works in one client but not another

I'm looking at using the WDTHEMEROOT application parameter to set a theme. I've set it to 'sap-chrome' in our development client and that works fine when I test the application. When I log into another client on the same system, however, the WDTHEMEROOT parameter has no effect. I'm guessing there is a setting in the first client but not in the second but I don't know what that might be. Any ideas ?
thanks,
Malcolm.

Well,
I guess my excitement was shortlived. I changed the theme and did whatever the note suggested. It worked!
But then I changed it back to 'sap_chrome' and did all that the note suggested - it did not work. I am now stuck with the new incomplete theme and am not able to change it back to what it was earlier.
Any Help?
Thanks,
Sanjiv

Call customer-subscreen causes dump in one box but not in another box

Hi guys,
Just wondering if anyone here encountered this situation before and knows of any explanation or solution.
There's two development boxes with a program that contains the following code/statement:
call customer-subscreen SSCR903 including 'SAPLXXXXXX' '2000'
SAPLXXXXXX happens to not exist in both boxes. In the first box, when execution reaches that statement above it will generate a dump saying that 'SAPLXXXXXX doesn't exist'. But in the second box, when execution reaches that statement above it won't generate a dump and execution continues to the next statement in the program.
I checked SAP documentation on the CALL CUSTOMER-SUBSCREEN keywords, but I didn't find anything that would explain why it dumps in the first box, but not in the second one.
Anyone encountered the same situation before? Any explanation why it's dumping in one box, but not in the other box?
Thanks in advance for any help.
Kind regards,
Carl

Welcome to sdn.
Abap doesn't check existence of the dynpro, it only check activation of the exit in CMOD, that may explain the, difference.
Regards,
Raymond

IPod recognized on one PC, but not on another

Hi!
I just received a brand new iPod Click Wheel 20GB in exchange for my old one that had a hardware defect within the warranty period.
When I tried to connect the device to PC1 (WinXP) which I had always used with the old iPod without any problems, the new iPod was discovered in Windows, but not in iTunes, although the diagnostics feature in iTunes showed the iPod connection with a green "light".
I removed all other USB devices, re-installed iTunes 7.0.2. twice, reset the iPod a few times and also put it into disk mode. After some attemps, it was recognized by iTunes and started to synchronize songs (which are both imported from original CDs and purchased from iTunes). However, synchronization took a lot longer than it used to with the old iPod (approx. one song per minute now compared to one song per 5-10 sec. before). After some time (3GB in first try, 7 GB in second try) an error code ("1-24") was displayed and synchronization (which should have been 18 GB in total) stopped.
The next thing I did was to try to connect the iPod to PC2 (again WinXP), first using an older version of iTunes and a different library. It worked without problems. Then I upgraded iTunes to V.7.0.2. and it still worked. Then I copied the iTunes library from the PC1 to PC2 and again, it worked.
In connection with copying the iTunes library, another question emerged: I copied all folders unter \iTunes\iTunes_Music from PC1 to PC2. Strangely, only 1,500 songs were copied on PC2, while there are over 3,000 songs on PC1. I compared the directories in detail and found out that there were artists with and some without their own directory, which might be the reason for the difference, as songs of those artists had not been copied.
Hence, my questions to the community are:
- What could I do to make the connection of my iPod with PC1 work like it did with the old iPod and like it does on PC2?
- Where is the rest of the songs/artists that do not have a seperate directory?
Thanks for your help, cheers, Boern.

I have the same kind of problem. I installed the ipod on one comouter in my house, dont know what version of itunes but i dont think the latest one and registered it, then I installed it onto this pc with the latest version of itunes and windows dosemt recognise it. It makes me insall drivers like five times and sends me loads of messages saying things like it is installed and ready to use one minute, then found new hardware the next. And even now after I have installed everything and I dont get the messages anymore it still dosent come up in 'my computer.' Does anyone know what the problem could be?

Oracle online in one node but not on another

Hi all,
I have Oracle 9i running in a 2 node windows 2003 cluster. When I try to move oracle from node 2 to node 1 it fails with ora-01017 invalid username or password and come online on node 2.
I noticed in the event log that in node1 it try to put the database online with user sys and privilege none, but in node 2 the event is with user sys and privilege sysdba.
Does anyone have any suggestion on what is the problem?
Thanks,

Let me try to explain better.
I opened Windows Cluster Administration and moved the Oracle group to node 1. The group came offline and windows tried to bring it online on node 1 where the error happens and after 3 fails it returns online to node 2.
I can't say it better because I'm still learning about this.
I can't give you more information right now because I'm at home and can't access the server but tommorow i'll post the exact error and the software versions to see if it helps.
Thanks for your time
DELLS1 is node 1 and DELLS2 is node 2 of cluster
Oracle is currently running in DELLS2 and this is what happen whe I try to move it to DELLS1
Database Version
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for 32-bit Windows: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
Event Log
OracleMSCSServices - Oracle Database resource DLL is about to bring PSI online.
Oracle.psi - Audit trail: ACTION : 'CONNECT' DATABASE USER: 'SYS' PRIVILEGE : NONE CLIENT USER: PSICLU CLIENT TERMINAL: DELLS1 STATUS: 1017 .
OracleMSCSServices - ORA-01017: invalid username/password; logon denied
Error bringing resource PSI online.
Then after 3 attempts
OracleMSCSServices - Oracle Database resource DLL is about to bring PSI online.
Oracle.psi - Audit trail: ACTION : 'CONNECT' DATABASE USER: 'SYS' PRIVILEGE : SYSDBA CLIENT USER: PSICLU CLIENT TERMINAL: DELLS2 STATUS: 0 .
Oracle.psi - Audit trail: ACTION : 'CONNECT' DATABASE USER: 'SYS' PRIVILEGE : SYSDBA CLIENT USER: PSICLU CLIENT TERMINAL: DELLS2 STATUS: 0 .
Oracle.psi - Audit trail: ACTION : 'STARTUP' DATABASE USER: 'SYS' PRIVILEGE : SYSDBA CLIENT USER: PSICLU CLIENT TERMINAL: Not Available STATUS: 0 .
Edited by: Reise on Mar 26, 2009 9:29 AM
Added info on oracle versions and event log

Oledb working in one place but not in another

I have two examples accessing the same table in my oracle database. Whereas code in example 2 always working , code in example 1 worked initially but after that failing with the following error.
Please help me as to why I get table or view does not exist error in one case but working fine in other case when I use the same table in both examples?
This post is organized as
A) the error
B) Code which contributed the error (please note this code worked initially , later started to fail without any modification at all).
C) Code which is working fine also using the oledb provider and using the same table in the database.
A) the error
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: ORA-00942: table or view does not exist
Source Error:
Line 14:
Line 15:      dim ds as DataSet= new DataSet()
Line 16:      objCmd.Fill(ds, "HR.tblPeople")Line 17:
Line 18:      MyDataList.DataSource=ds.Tables("HR.tblPeople").DefaultView
Error Complete
B) Code which contributed the error 'Table or View Does not exist'
<% @ Import Namespace="System.Data" %>
<% @ Import NameSpace="System.Data.OleDb" %>
<Script language="VB" runat="server">
Sub Page_Load(obj as Object, e as eventargs)
     dim objconn as new OleDBConnection _
     ("Provider=OraOLEDB.Oracle.1;Data Source=bora9i;" & _
     "User ID=Sssss;Password=aaaaa;" & _
"Extended Properties=;Persist Security Info=False;OLEDB.NET=True;")
     dim objcmd as new OledbDataAdapter _
     ("SELECT * FROM HR.tblPeople" _
& "ORDER BY LastName, FirstName",objConn)
     dim ds as DataSet= new DataSet()
     objCmd.Fill(ds, "HR.tblPeople")
     MyDataList.DataSource=ds.Tables("HR.tblPeople").DefaultView
     MyDataList.DataBind()
End Sub
</Script>
<HTML>
<BODY>
<Asp:DataList id="MyDataList" RepeatColumns="2"
     RepeatDirection="Vertical" runat="Server">
     <ItemTemplate>
          <div - style="padding:15,15,15,15;font-size:10pt;
          font-family:Verdana">
          <div - style="font:12pt Verdana;color:darked">
          <i><b><%# DataBinder.Eval(Container.DataItem,"FirstName")%>
          <%# DataBinder.Eval(Container.DataItem,"LastName")%></i></b>.
          </div>
          <br>
          <b>Address: </b><%# DataBinder.Eval(Container.DataItem,"Address")%><br>
          <b>CompanyName: </b><%# DataBinder.Eval(Container.DataItem,"CompanyName")%><br>
          <b>Email: </b><%# DataBinder.Eval(Container.DataItem,"Email")%><br>
          <b>Webpage: </b><%# DataBinder.Eval(Container.DataItem,"WebPage")%><br>
          <b>HomePhone: </b><%# DataBinder.Eval(Container.DataItem,"HomePhone")%><br>
          </div>
     </ItemTemplate>
</Asp:DataList>
</BODY>
</HTML>
C) Code which is working fine also using OleDb provider and using the same table
<% @ Page Language="VB" Debug="True" %>
<% @ Import Namespace="System" %>
<% @ Import Namespace="System.Data" %>
<% @ Import Namespace="System.Data.OleDb" %>
<html>
<head>
<title>Contact Manager: View All Contacts</title>
</head>
<body bgcolor="#FFFFFF">
<h1>View All Contacts</h1>
<table cellpadding="4" cellspacing="0" width="100%">
<tr>
<th>Name</th>
<th>Title</th>
<th>Company Name</th>
<th>Work Phone</th>
</tr>
<asp:label id="lblOutput" runat="server"></asp:Label>
</table>
</body>
</html>
<script runat="SERVER">
Sub Page_Load(Src As Object, e As EventArgs)
Dim sqlConn As New OledbConnection
Dim sqlCmd As New OledbCommand
Dim sdrData As OledbDataReader
Dim sb As New StringBuilder
sqlConn.ConnectionString = _
"Provider=OraOLEDB.Oracle.1;Data Source=bora9i;" & _
"User ID=Sssss;Password=aaaaa;" & _
"Extended Properties=;Persist Security Info=False;OLEDB.NET=True;"
sqlConn.Open()
sqlCmd.CommandText = "SELECT * FROM HR.tblPeople " _
& "ORDER BY LastName, FirstName"
sqlCmd.CommandType = CommandType.Text
sqlCmd.Connection = sqlConn
sdrData = sqlCmd.ExecuteReader()
While sdrData.Read()
sb.Append("<tr>" + vbCrLf)
sb.AppendFormat(" <td>{0}, {1}</td>" + vbCrLf, _
sdrData("LastName"), _
sdrData("FirstName"))
sb.AppendFormat(" <td>{0}</td>" + vbCrLf, sdrData("Title"))
sb.AppendFormat(" <td>{0}</td>" + vbCrLf, _
sdrData("CompanyName"))
sb.AppendFormat(" <td>{0}</td>" + vbCrLf, sdrData("WorkPhone"))
sb.Append("</tr>" + vbCrLf)
End While
sdrData.Close()
sqlConn.Close()
lblOutput.Text = sb.ToString()
End Sub
</script>

Hi Srikanth,
1. why there is no space between "HR.tblPeople" and "ORDER BY" in your query? I am surprised it works initially.
dim objcmd as new OledbDataAdapter _
("SELECT * FROM HR.tblPeople" _
& "ORDER BY LastName, FirstName",objConn)
2. use
Dim ds As New DataSet()
Sinclair

Beta user on one computer but not on another

I have Beta version 16.0 on one computer on one computer but on another computer its regular version 15.0.1. Bookmarks are not synching. How do i get both versions the same?

Do you have [[Firefox Sync - Take your bookmarks, tabs and personal information with you|Firefox Sync]] setup? If so and it is giving you problems, please check [[Firefox Sync troubleshooting and tips]].
Please tell us if this helped!

Visa class conflict on one PC but not on another

Hello
My problem is, that vi's (LabVIEW-drivers for the data aquisition unit
34970A, but also any self-created) with VISA functions doesn't work on
one PC, but on another PC (with the same LabVIEW version 6.0 and the
same operation system Windows 2000) they do.
The reason why it doesen't work on one PC is a class conflict between
VISA resource name control and the VISA function block (read, write,
On the PC with the problem also a framegrabber-card is installed. May
this cause the problem? Or maybe any other software?
I haven't installed any HPIB or other drivers for the data aquisition
unit on any PC. But also when I install the driver, the problem isn't
solved. (I tried both ways.)
Thanks for help, Florian.

That is a great suggestion. Make sure you have the full NI-VISA driver installed. You may also want to check to see if that VISA resource is listed in MAX. Even though the software is present, you communication line may not be detected.
You can open up the VISA Alias Editor to find which resource names exist on your computer. Then you can use the VISA Interactive Control to actually test the VISA resource. Open the Interactive Control from Tools>>NI-VISA>>Interactive Control. Double-click the resource name of your device and select the Basic I/O tab on the panel that appears. This allows you to write to and read from your device to test if VISA works with it at all.
Testing with these two utilities should give you some more information about what is goin
g on in your system.
J.R. Allen

Send Mail attachment to one recipient but not to another?

In Mail 4.5, how do I send an attachment to the main recipient but not to the carbon copy recipient?

Thanks, Bob. I realized only after I posted (this is my first post ever) that someone had answered my question previously but my search had not revealed the answer. I understand now the limitation of Mail--only one message goes to the outgoing server regardless of number of recipients, and the attachment is part of the message. Thanks again for your help.

Text Track font is missing on one computer, but not on another

I brought in a text track into my QT movie, then saved the whole thing as "self-contained". The font that I set for the text track (with QT descriptor) is Verdana. The problem is that on one computer, the text shows up fine, yet on another laptop, the text shows up as a bunch of boxes instead of characters.
I know that laptop has Verdana as a font on the system, so I am not sure what's going on.
has anyone had that problem before?
Thanks!

I use a lot of text tracks in my "movies". Since mine are made on a Mac I also use Mac "specific" fonts for some of them. When viewed on a PC the Mac only font always defaults to an appropriate substitute and no one is the wiser.
If there is an issue with a PC only font it should also revert to a similar substitute.
Other issues could be a corrupt font or even duplicates or a conflict.
You may want to experiment a bit with some text track QT files.
Create your plain text (.txt) file and import into QuickTime.
Export it (with text descriptors) back to a text file so you can edit the font. Make a few versions and test the file onvarious computers (Mac and PC).
More info:
http://www.apple.com/quicktime/tutorials/textdescriptors.html

Missing Music from one file but not on another file

Hello. I want to add a music sound to a program. I click on "browse" to find the music I want to add but some of the ITunes music files aren't there but.......I can closed out of the program completely go to my user folder, click on my name, the Music folder, Itunes folder, the ITunes Media folder and all the songs are there. To do the "browse", here all the files: Album Artwork>ITunes Media>Previous Libraries. To just go to my personal folder, then Music, here's the folders: Album Artworm>ITunes Media>Previous Libraries>ITunes Libraries>ITunes Library Extras>ITunes Library Genius>ITunes Music Library.
With the "browse" option, the ITuned Media folder is there but completely empty. But just to go the Music folder, with the ITUnes Media folder, all the songs are there. ITunes Media- how can the songs be in this folder but to do a "browse" to add a song, the songs are not. I have tried uninstalling ITunes and reinstalling it and still the issue. Maybe I have the folders wrong. I went to Microsoft Answers but since ITunes is my default media player, they suggested I contact the support here.
I hope I explain it clearly in order for someone to help me. Thanks and have a good day.

Here are typical layouts for the iTunes folders:
The iTunes folder is normally inside <User's Music>. I get the idea that things are different but I don't have a clear picture yet. I think you've somehow managed to get the media folder pointed at <User's Music> instead <User's Music>\iTunes\iTunes Media. A screenshot of the iTunes > Edit > Preferences > Advanced might help confirm. Once we know what is going on it should be possible to make suggestions as to what to do next.
tt2

TNS error ORA-12154 : can connect to one server but not to another.

Hello,
I have a Forms 6.0 application running on a Solaris box. It connects
fine to an Oracle 9.0 server but fails with ORA-12154 when trying to
connect to Oracle 10g running on a different server.
'sqlplus' can connect fine to both servers .
'tnsping'result is succesful from the Solaris client to both servers.
Configuration details are as follows. (IP Addresses have been
sanitised. I've included the client side listener and also entries for
the 'local' Oracle 8i server running on the Solaris 'client' although
I think some of this may be not relevant):
1. Connecting to Server 9.0 : application CAN connect successfully:
a. application URL
http://host_ip_address:7778/dev60cgi/if60cgi?config=rack : application
runs successfully
b. client's formsweb.cfg excerpt:
[rack]
pageTitle=yadayada
form=login01
userid=user/pass@nn_rackspace
archive=f60all.jar, oracle_ice-4_03_1.jar
c. client's tnsnames.ora excerpt (local services not excluded):
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sun1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
RR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = sun1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = RR)
NN_RACKSPACE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 1.2.33.44)(PORT =1521))
(CONNECT_DATA =
# (SERVER = DEDICATED)
(SERVICE_NAME = QQ1.QONNECTIS.COM)
NN_QQ3 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
# (SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
NN_QQ3.qonnectis.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
# (SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
d. client's sqlnet.ora: contains ONLY:
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
e. client's listener.ora excerpt:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /space/oracle/OraHome1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /space/oracle/OraHome1)
(SID_NAME = orcl)
(SID_DESC =
(GLOBAL_DBNAME = NN)
(ORACLE_HOME = /space/oracle/OraHome1)
(SID_NAME = NN)
(SID_DESC =
(GLOBAL_DBNAME = RR)
(ORACLE_HOME = /space/oracle/OraHome1)
(SID_NAME = RR)
f. remote server's tnsnames.ora excerpt:
QQ1.QONNECTIS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = qanasta1.qonnectis.com)
(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = QQ1.qonnectis.com)
QQ1 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)
(HOST = qanasta1.qonnectis.com)
(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = QQ1)
QQ3.QONNECTIS.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.qonnectis.com)
g. remote server's sqlnet.ora contains only:
NAMES.DEFAULT_DOMAIN = qonnectis.com
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
h. remote server's listener.ora excerpt:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)
(HOST =qanasta1.qonnectis.com)
(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/product/9.2.0.1.0)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = QQ1.qonnectis.com)
(ORACLE_HOME = /opt/oracle/product/9.2.0.1.0)
(SID_NAME = QQ1)
i. on Solaris client, tnsping nn_rackspace : succeeds
j. on Solaris client, sqlplus user/pass@nn_rackspace: succeeds
k. on server, Oracle server processes have names like ora_d000_QQ1.
l. on server, Oracle connected listener processes show up in ps
listing like oracleQQ1 (LOCAL=NO)
m. On server, lsnrctl status reports amongst other things
Service "QQ1.qonnectis.com" has 2 instance(s).
Instance "QQ1", status UNKNOWN, has 1 handler(s) for this service...
Instance "QQ1", status READY, has 1 handler(s) for this service...
2. Connecting to Server 10g : application does NOT connect successfully:
a. application URL
http://host_ip_address:7778/dev60cgi/if60cgi?config=rack2
b. client's formsweb.cfg excerpt:
[rack2]
pageTitle=yadayada
form=login01
userid=user/pass@nn_qq3
archive=f60all.jar, oracle_ice-4_03_1.jar
c. client's tnsnames.ora excerpt (local services not excluded):
-as above-
d. client's sqlnet.ora: contains ONLY:
-as above-
e. client's listener.ora excerpt:
-as above-
f. remote server's tnsnames.ora excerpt:
# default sid 'orcl' : for local access
orcl =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
# QQ3_Vlan : default sid 'orcl' : access over 10. private net from qq1
QQ3_VLAN =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.99.99.99)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
# nn_qq3 : default sid 'orcl' : access from external sites by public
# external IP - specifically sun admin dba tool in twx
NN_QQ3 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 2.3.44.55)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl.qonnectis.com)
g. remote server's sqlnet.ora contains only:
NAMES.DIRECTORY_PATH= (TNSNAMES)
NAMES.DEFAULT_DOMAIN = qonnectis.com
h. remote server's listener.ora excerpt:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/OraHome_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/OraHome_1)
(SID_NAME = orcl)
i. on Solaris client, tnsping nn_qq3 : succeeds
j. on Solaris client, sqlplus user/pass@nn_qq3: succeeds
k. on server, Oracle server processes have names like ora_d000_orcl .
l. on server, Oracle connected listener processes show up in ps
listing like oracleorcl (LOCAL=NO)
m. On server, lsnrctl status reports amongst other things
Service "orcl" has 1 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this
service...
Service "orcl.qonnectis.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
As you can see, I have tried adding an alias for the default domain
name suffix '.qonnectis.com' in the tnsnames.ora files on the solaris
client and on the new 10g server.
Just to add to the fun, the 'new' server running Ora 10g CANNOT connect
to the old server running Ora 9:
sqlplus user/pass@nn_qq3
sqlplus user/pass@nn_qq3.qonnectis.com both fail.
While the old 9.0 server CAN connect to the new 10g one:
sqlplus user/[email protected] succeeds.
Sorry this is such a mess. TBH I find this whole area extremely
confusing.
All suggestions welcome. Unfortunately I am away on holiday next week
but will follow up any leads when I get back.
thanks!
Victor Churchill.

Hi DianeinBirmingham,
Welcome to the Apple Discussions
The Log goes further
Chat ended with error -8
Video Conference Error Report:
Video Conference Support Report:
Video Conference User Report:
Binary Images Description for "iChat":
This bit suggests the ports are not open.
Intermittent success like this And the ports not being open suggests a Modem that might be SIP aware such a Thomson-Alcatel Speedtouch device.
Can you tell us what modem you have ?
7:55 PM Friday; July 13, 2007

Form on Table with Report works in one environment but not in another.

Here's a short description of the problem:
Created a form on a table with report (using the wizard) in an ApEx application. The form and report work perfect in development environment. Once the application is moved to the Test environment, the insert feature of the form does not work. We have verified that the underlying table the form is based on is there with all the fields, primary key, sequence and trigger.
Any ideas?
Marc

Ben,
I assume that apex_public_user has all the approporiate privilegesapex_public_user requires no privileges other than those it is created with during installation and the execute privileges on procedures it may acquire as URL-invokable procedures are developed and registered.
Marc - What are the symptoms of the problem (insert does not work) ? What does the debug output show when you run the page in debug mode? Does the "request" value of the button (create button?) match one of the request values recognized by the DML process?
Scott

Weird - Query timeout on 1 client but not on another

Hi folks
I have a really strange problem. In SSMS I run a query on machine A and it runs in under a second. I run the same query on machine B and it takes nearly 2 minutes to run. Both machines are querying the same DB. I tried it on a 3rd machine and it also
returns in under a second, so obviously the fault is with this single machine.
The table I am querying has a large file (40mb) stored in a varbinary(max) field, and the query is returning this single row... It seems to work ok on smaller files.
Any ideas appreciated....!

Make sure the following:
1. All machines have the same resource capacity. Otherwise, it is expected.
2. Look at the execution plan to confirm the index usage and for any differences
3. The data is same for all three machines.
4. The stats are updated

Missing Benefit Plan in HRBEN0001 in one client but not in another.

Similar Messages

Maybe you are looking for