Missing / blank images in galleries - PLEASE HELP

Someone else asked this earlier this year, with no real satisfactory answer.
Consistently, when I create galleries in Aperture, about 10 percent of the images end up as blank thumbnails and larger images. This is maddening and unusable. (I'm sending galleries to magazines, and I have to always send a second gallery of the dropped / missing images). I've tried adjusting the thumbnail and image sizes to different parameters (no improvement). I've tried re-processing the gallery multiple times (it just ends up with different images missing). I've tried leaving my computer completely untouched while it's creating the gallery (no improvement).
Is this happening to anyone else? I can't be the only one suffering from this. When I view the galleries within Aperture, it's all there. Only once I view the exported gallery in a browser are images gone. (I've tried viewing in different browsers.)
Any suggestions? I pray that this is fixed in the next version of Aperture, if not before.
thank you

I have found that there are so much to be worked out with this aperture software.
I am sticking with Adobe Lightroom and my Nikon NX software. They are both so much easier to use and considerably less time consuming.
I'm, sorry I wasted the money on Aperture.
If I am speding more time & effort on the sodtware than with my camera shooting, something is clearly not right.

Similar Messages

I have an ibook g4 laptop and i cant add music frommy library to my ipod touch but my ipod shows up on image capture ? please help immiedeatly

i have an ibook g4 laptop and i cant add music from my library to my ipod touch4 but my ipod shows up on image capture ? please help immiedeatly

What OS is on the iPod?
What version of iTunes is on the computer
Try using iTunes 10.6.3

Whenever i open any tab on the app store such as games or entertainment or travel its starts loading and all i see is a blank page...Please HELP!!!

whenever i open any tab on the app store such as games or entertainment or travel its starts loading and all i see is a blank page...Please HELP!!!

Try updating to iTunes 10.4.1 -> http://www.apple.com/itunes/download/
If that doesn't work, try resetting Winsock. It looks like that worked for quite a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help

My Ipod 3rd generation wont turn off and is showing a blank white screen someone please help! xx

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Missing inspection data in QA33.Please help

After GR, Inspection lot was assigned. But unable to proceed to results recording in QE51N.It says "no entries found". And i could see that there was no inspection data in the lot created. i.e in QA33 the Inspection specifications tab has no data and in Insp. lot quantities tab "sample size" field says 0. I don't know where i was wrong. Please help me.
Also please explain::
The master data involved for QM in procurement is :
we have to create :
- QM view in Material master and Inspection Type as Active
- catalog to define attributes
- MIC to define inspection criteria(like a test case)
- selected set
- create sampling scheme, sampling procedures, Dynamic Modification Rules to define sampling criteria.
- Inspection Plan
Please correct me if i am missing any mandatory master data here.
Also please explain how are these connected to each other to Start Quality inspection after a GR for a particular material x in plant P.
Thanks in advance.

Hi,
Please check the inspection lot status ..if its in "CRTD" (Created) status then you need to make it to "REL"(release) before proceeding (like result recording or UD)..
Check if the Inspection plan with the correct usage is assigned in the plan concerned for GR (As there are different usages for production,GR from purchase order,stock transfer etc)..Also see if the Inspection plan is released.
Again the MIC's you created ,please check if they are also active. Else see if sample size is assigned correctly
Hope this helps
Regards
George

Problem installing iTunes update: "Can't start" iTunes "because MSVCR80.dll is missing" from my computer. Please help!

Please help! I tried to update my iTunes as prompted, but it did not install correctly, and now I am getting the following message and do not know how to fix the problem:
"The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling this program to fix the problem."
Another window gives me this message:
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 126)"
BUT I AM AFRAID TO REINSTALL iTUNES and lose my library! Would greatly appreciate learning how to resolve this porblem without losing my music!
Cheers!

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

I can't open an image in Firefox, please help..

I am using Firefox 11 UK edition on a HP Laptop running Windows 7.
I like to view images in FF instead of Micro-craps image viewer programs. Until recently I had no problem with that. I would right click on the image and select open with FF. Today all of a sudden it wont do it.
Today when I right click FF is not an option. When I do the browse thing and choose the program manually nothing happens at all.
I mean nothing at all, its like windows doesn't see FF at all. It is very frustrating.
The image will then open in MS Image Viewer.
What is so off is it will allow me to use ANY other program even programs that not designed for it. (I will just get an error of course when it tried to open).
It almost appears as though MS has done something to purposely not allow FF to do this.
Please help!

do a reinstall on firefox

Pixelated images in safari, please help.

Hi everyone,
Hoping someone can help me with a issue i have with my new macbook pro.
When browsing the net, safari and firefox show really pixelated images. I thought it might be my internet connection compressing data or something, but i have tried other computers on the same internet connection and the images show perfect...
So this makes me think its the macbook. I have upgraded snow leopard from 10.6 to 10.6.2 and updated safari, but unfortunately this didnt help my problem. So now i have ended up here, asking you people, coz im out of ideas.
I will include some screen shots so you can see exactly what i mean.
Notice the bad quality images and even on google's banner it is pixelated heaps...
Please help if you can. Its very annoying. Cheers.
screenshots
http://i134.photobucket.com/albums/q93/Bonustokin/randon/Screenshot2010-02-13at1 00814PM.png
http://i134.photobucket.com/albums/q93/Bonustokin/randon/Screenshot2010-02-13at1 00814PM.png

Yes, I see the big ugly squares. They are what appears whenever extremely heavy JPEG compression is applied to a low-resolution image tht has relatively large areas of similar colors. Something somewhere is applying such compression to the pages, or portions of them, that you are viewing in your browser(s). Your MBP is not doing that: it can't. Either the page images (or parts of them) are being compressed by the website owners or, if every web page is affected, they are being compressed by your ISP in the process of being transmitted to you, as Gordito suggests. That would greatly increase the speed of page loading, but at the expense of image quality. You wouldn't see the image degradation on an iPhone or cell phone — the screen is too small — but on the MBP's high-resolution display it would be much more apparent, IF the MBP were receiving the signal in the same highly compressed form as the phone. If the MBP receives the same web pages through an ISP that doesn't over-compress them, they'll look the way they ought to look. So if you are receiving these web pages through a cellular ISP rather than through a broadband connection, take the MBP to a wifi hotspot and connect through wifi instead. I bet things will look different then.
Compressing images is something a web browser can't do: a browser just displays the signal that comes to it.

Text editable in images in flash Please help

Hello
Dear All Friends
I want to make text editable in images in flash to get copy from text
can i Make this
and other question please
can i convert text in image in flash to normal string ?
please help
Thank you

Images do not store text data in any isolateable manner, it is comprised of just pixels like anything else in the image. You would need to develop some form of complicated text recognition program to be able to extract text from an image, and I don't believe anyone has.

Cannot make image copy. Please Help

Hi,
I am trying to make a image copy for the patch 110930-03 because i am getting the error
Warning:ACPI tables not in reclaim memory
prom_panic:kmem_free block already free
Entering boot debugger
[12ff05]
Below is the command i am giving.
C:\>dd S28DCA0301 A:
S28DCA0301: No such file or directory
I downloaded the zip file and then extracted it on a windows 2000 server.
PLEASE HELP.
Thanks
Anurag

Could be a problem with windows 8.3 filenames. Does it
work if you pass dd the "short" filename associated with
S28DCA0301? (The explorer properties dialog should list
the MS-DOS "short" filename).

Hey , this is Satvir and my personal hotspot option is missing in my ipad settings please help it's urgent , please tell me what should I do

my personal hotspot option is missing from the settings , please help me out
<Email Edited by Host>

It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it.

Image is Flickering----Please help

I have one hand image. I am drawing polygon above each finger.
Whenever the user clicks on particular finger, we are changing the color of that polygon.
We are changing the colors of the fingers(polygons) based on the database value when some functionalty is invoked. We are updating this color in PaintComponent of JPanel. The colors are flickering some time.
Please help.
Thanks in Advance.

For drawing your component the best of all would be using Canvas component and double buffering.
JPanel and othen Swing components using its own methods for paint and not necessarily draw components how would you like.
Example:
<code>
class MyPainter extends Canvas {
Image hand = ...;
public void update(Graphics g) {
this.paint(g);
public void paint(Graphics g) {
Dimension size = this.getSize();
Image painter = createImage(size.width, size.height);
Graphics g2 = painter.getGraphics();
g2.drawImage(hand, 0, 0, this);
g2.drawPoligon(...);
g.drawImage(g2, 0, 0, this);
</code>
If you make applet you must cleat graphics g2 and image painter.

Missing audio after export. Please help!

So I made a video for myself and friends on iMovie and included some music that I legally purchased. This video is entirely non-commercial so I didn't see an issue with using some music for it.
when I export from iMovie, I get the video with no sound and then after the video ends I get the audio with no video. Can anyone explain to me what in the world is going on? First I can see the entire video with no audio, then all I see is white and the audio from the video pops up.
Last problem is that all the music is missing from iTunes. I can hear all the other audio, but the music I imported from iTunes is missing. It's just the regular audio I imported from the video camera with the clips. Can someone please help me out?
THANKS!

hi Sue,
In my timeline I had the music across both audio bars. Once I reimported the audio, it was all on the third timeline bar. It was colored orange. The audio files do not overlap at all however. So the top bar is filled with the video tracks. The second bar is empty. The third bar has the audio files. They are one after another, seperated by a second or two of silence. There is audio playing on some of the clips of video, but on most of the clips I have muted so that the music should be all you hear. I actually muted the clips themselves, and not the entire bar.
All the boxes on the far right are checked. I do not have a camera attached. I do have an external hard drive attached via firewire. I have over 80 individual clips in the video. I have 512 Megs of RAM and a 1.25 Ghz processor on my lampstand iMac G4. The file is about 9 minutes long.
when I export it to quicktime all the video shows up, without any errors except for the fact that it is completely silent. At the end of the video, I get a white screen and the audio from the video clips starts playing, in order, as though I extracted the audio from the entire video and placed it at the end for no reason. None of the music plays. The files that were muted appear to be staying muted, but the ones that have sound are playing. I followed the instructions above about burning a CD, importing the audio files from the CD and then exporting the video to avoid copy protection issues.
Under my advanced options in the Preferences window I unchecked "extract audio in paste over" and "filter audio from camera" after the first two times this happened to me. the problem continued after I unchecked those.
I think I've given you as much info as you might need. If there are any other questions please ask and I'll try to get the info for you. Thank you VERY much for your time and help.

Need to export Missing object type called "TYPE" Please Help

I did a referesh of one of the schema, I could see the difference between the source and destination schema object count.
but object type is "TYPE" , where the difference lies.
Three TYPE kind of objects are extra found in production which have not been imported to dest db.
Could you please help me how can i take export of those object types and import the same in dest.
For reference: Missing objects in destination schema
OBJECT_NAME OBJECT_TYPE
SYS_PLSQL_88116_DUMMY_1 TYPE
SYS_PLSQL_88116_481_1 TYPE
SYS_PLSQL_88116_433_1 TYPE

Sir I have already tried that, but couldnt succeed.
For reference: The 19 type which are imported successfully out of 22, the DDL is acheived, but when I tried to get the ddl of rest three from production it throws error, like not found in schema, even i tried to get it from sys schema, but same error..
The one which is imported properly
=========================
SQL> select dbms_metadata.get_ddl('TYPE','XRATE_TABLE_TYPE','TKCSOWNER') FROM DUAL;
DBMS_METADATA.GET_DDL('TYPE','XRATE_TABLE_TYPE','TKCSOWNER')
CREATE OR REPLACE TYPE "TKCSOWNER"."XRATE_TABLE_TYPE" IS TABLE OF XRATE_RECORD
The one which is not imported:
==================
SQL> select dbms_metadata.get_ddl('TYPE','SYS_PLSQL_88116_DUMMY_1','TKCSOWNER') FROM DUAL;
ERROR:
ORA-31603: object "SYS_PLSQL_88116_DUMMY_1" of type TYPE not found in schema
"TKCSOWNER"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 105
ORA-06512: at "SYS.DBMS_METADATA", line 3241
ORA-06512: at "SYS.DBMS_METADATA", line 4812
ORA-06512: at line 1
no rows selected

Windows 7 image restore issues (Please help!!!!)

I backed up my Windows 7 partition to an external hard drive, deleted my Boot Camp partition, and made a new, bigger one. I then booted from the Windows 7 install DVD and went to restore the image to the drive, but it refuses to do so without wiping the entire disk. Someone please help me; I really need Windows back, and really don't want to go through the pain of reinstalling!
-macfanboy

It sounds like you are saying your rerun of bootcamp did not create a partition? Maybe run it again? give it the Install for restart with eexternal connected?
The external backup you made had to be an Image Backup which is ~= to your (C: etc.) drive space and takes 1/2 to 1 hour to backup and to restore.
1.Insert the installation disc or system repair disc.
2.Restart your computer using the computer's power button.
3.If prompted, press any key to start the computer from the installation disc or system repair disc - (You can select it from Option key start up)
4.Choose your language settings, and then click Next.
5.Click Repair your computer.
This step only applies if you are using a Windows installation disc.
Windows searches for external image
6.Select a recovery option, and then click Next.
http://windows.microsoft.com/en-us/windows7/Restore-your-computer-from-a-system- image-backup

Missing / blank images in galleries - PLEASE HELP

Similar Messages

Maybe you are looking for