Missing bluetooth disable option in BIOS

hallo, I need disable bluetooth, but no wifi (I cannot use the button on front side)
Can developers add that option?

Have you checked this item in BIOS: "BIOS --> Security --> I/O Port Access --> Bluetooth"?
ThinkPad T500 2082-6PG: T9400(2.53GHz), 2GB RAM, 250GB 5400rpm HD,
LCD, 256MB ATI Radeon HD3650, Secure chip, Fingerprint reader, WinXP SP2

Similar Messages

Missing "Intel AMT" option in BIOS Config menu

I'm not sure what that setting is for, but it is missing from the time I bought this laptop. I won't bother returning it just for that, but I wonder why Lenovo chose to remove it.

Good day.
Can you tell us a little more about your system?
Model? BIOS version?
The information may help other members to offer you suggestions or advice.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

K8N Neo4 Platinum SLI missing 1t/2t option in bios

Hey all,
I cant see 1t2t command rate option in my bios. It is disappered. Need help pls.
System:
K8N Neo4 Platinum SLI (7100v3A bios running)
AMD athlon 64 3700+ S939 san diego (brand ID:4, model:7, stepping:2)
A-DATA 2xddr 600
not: I saw some other ppl had similar problems with their platinum ultra bords and they did solve the problem by flashing their bios to previous one.
You can read that post in here:
https://forum-en.msi.com/index.php?topic=101464.msg740760#msg740760

Quote from: flobelix on 30-January-07, 21:44:59
??? I'm kind of confused... As I said I'm using the same board with the same bios and I can see and change 1T/2T.
Thanks for your reply,
Our mainboard are same but our cpu core are different. When I was using Venice everything was ok. Was using my Venice 9*300 with water cooling.
But now I have 3700+ SAN DIEGO .
Family: F
Ext. Model: 37
Revision: DH-E6
Quote from: flobelix on 30-January-07, 21:44:59
Where exactly are you trying to find this option in the bios? As Richard said make sure you enabled manual for CPU and Ram settings.
I know where I am looking.
User Config Mode --> [Manual] but there is only "Bottom of 32-bit" , "Read Preamble value" and " Async Latency value".
Quote from: flobelix on 30-January-07, 21:44:59
Please tell us exactly(!) what you changed in Cell Menu (core speed, HT, mem clock and so on), report your CPU model and stepping.
Did you clear cmos after(!) flashing 3.A mod?
After flash I remove my power cable for 1-2 mşnutes than press reset button. During post screen I enter bios to load failsafe defaults. After those steps I try to find what is good/bad with that bios.
Feel free to ask anything that can fix this problem.

[msi k8n neo4-f] missing options in bios

1. is there any posibility to turn off fdd seek and to turn on num lock? there is no that options in bios.
2. does this mainboard have built-in firewall?
thanks

no no, i've just wanted to disable fdd seeking during fdc controller initialization. now i know that it is impossible with official bios version (with numlock the same)
now the question where can i find hacked/modded bioses for this mainboard? (http://www.lejabeach.com/MSIK8N/k8nneo4ultra/k8nneo4.html ---> does these bioses fits to neo4-f? i think for all k8n neo4 (nforce 4 and nforce 4 ultra) bioses are the same)
and one more question: i've read on some other forum that on this mainboard with bios v1.3 and higher (official) it is impossible to set FSB higher than ~229MHz (blank screen even i've set memory to 100MHz, HT x1 and higher CPU voltage) and the sollution is to flash with bios v1.2 (official) or modded/hacked version. is it true?

IdeaPad Flex 15D no virtualization option in BIOS 94CN07WW (AMD APU A6-5200)

Lenovo IdeaPad Flex 15D (AMD APU A6-5200) does not have virtualization option in BIOS version 94CN07WW. What this means is if one wants to run for example Virtualbox, then one would only be able to vitualize a 32-bit operating system, instead of either a 32-bit or 64-bit operating system. However, a similar model Lenovo IdeaPad S415 Touch (AMD APU A6-5200) does have the SVM option in the BIOS to enable or disable virtualizing 64-bit operating systems. December 22, 2014 8:00AM CSTWhen I called Lenovo technical support, I initially spoke with someone who sounded as if they were from the Philippines, which is fine if they are knowledgable, and their english is fluent. Unfortunately, when I explained the technical situation, he had no idea what I was talking about. After he checked with in Level 2 quite few times, he said that the motherboard doesn't support virtualization... So, I advised him that I've been in the IT industry for 10 years, and while admittedly I don't know everything about virtualization, I have some level of knowledge on the subject having worked in all positions from Level 1 Technical Support to Systems Engineer. Hence, I proceeded to explain how virtualization is a dependency of the CPU, not the motherboard. One would of course need to have a motherboard that is compatible with the CPU in order for the computer to work at all. However, one may buy a CPU without virtualization extensions and plug it into a motherboard, or one may buy the same CPU with virtualization extensions and plug it into this same motherboard. As well, I invited him to look at Intel or AMD's website for further information on this while we were on the phone so I could help clear up any questions he had on the matter. While he didn't appear to review either website, he checked in with Level 2 again, and suggested we check forums to see if a work around exists. I quickly explained there is no work around to this type of problem, and the resolution would be to put a request into engineering to have a BIOS update pushed out that allowed enabling/disabling SVM by default. After checking in with Level 2 once again, he said if it's not an option in the BIOS, then the computer doesn't support it. I advised while this statement is something I already knew (not to mention painfully obvious at this point), it's not a technical limitation of the hardware, as the CPU supports it. The root cause is that toggling SVM enabled/disabled wasn't designed in the BIOS (i.e. this needs a BIOS update to come out to fix this problem). We briefly talked about a warranty event, how from my past experiences sometimes when one submits a laptop to a vendor and gets it returned, it comes with a BIOS version that is later than originally submitted, or one that is not available for download from the vendor website. However, he wasn't really for this idea, as I didn't have a hardware fault per-say, and I wasn't interested in insisting one a warranty event as it was frankly a low probability event to have this outcome, and it wasn't what I wanted out of the conversation anyway. So, after he checked in with Level 2 again, he said he can call me back after he investigated some more. I advised him that a call back is useless if he is the one calling me back as we already know the problem, resolution, and who would need to address it. After he began to stutter, and make incomplete sentences that made no sense, he put me on hold to check in with Level 2 again (yes he checked in with them this many times). When he came back he claimed I said earlier in the conversation that the option to enable it was available so I should just go ahead and do that. Given that this guy frankly didn't know what I was talking about to begin wtih, and now is telling me something that never even happened in the conversation, I pretty much had enough of the lack of knowledge, and customer service I was receiving, so I asked to speak to either a supervisor or the next level of support. Thankfully he transferred me to his supervisor, who sounded like he wasn't from an outsourced call center, as when I explained the situation he understood me the first time, and spoke clear and articulate english. After a very brief discussion about what he was reading from Lenovo forums and a BBB complaint similar to my inquiry, we came to the conclusion that it would need to be a customer courtesy request to the engineering department to request the SVM option become available via a BIOS update. So, with my case number in hand, I said despite him not being able to promise me the outcome I desired, he at least got the issue in front of the right people, which I appreciated. Long story short, it would be just simply really awesome if Lenovo could push out a Happy Holidays BIOS update that would allow me to enable SVM on my IdeaPad Flex 15D. Thanks for reading.

I came across this issue a while back also. However, with the quickly-approaching release of Windows 10, there's another problem that I consider far more important (it is also related to the BIOS, go figure). There is no way to enable/disable Execute Disable Bit in the BIOS. Due to this, I have been unable to upgrade to the Windows 10 Insider Preview, and I fear that this will be the same case with the final release. This issue apparently affects lots of others as well. It is interesting to note that the Flex 15D drivers page no longer says that a BIOS update is not available for the laptop... It doesn't give any info about the BIOS. Get with it, Lenovo!

Magic Trackpad - no "set up bluetooth trackpad" option in preferences

Just bought a magic trackpad, updated to 10.6.4, laptop finds the magic trackpad (verified by looking at bluetooth panel), but I can't set it up/ connect. When I go to the trackpad section in preferences, the option that the instruction manual talks about just isn't there ("Click "set up bluetooth trackpad..." in the lower right corner", p.4 of the manual). Lower right corner is empty...
Maybe I'm missing something here? I know it's finding it, but no connect-ability... Interestingly the keyboard section of preferences does have a setup bluetooth keyboard option.
Have all the relevant updates to 10.6.4. been made?

My apple store purchased trackpad also had misleading instructions. Why it couldn't reference the exact download location for the software is a mystery. What, they couldn't have come up with a URL in advance? Sheesh! Worse, going to Apple.com/Downloads and searching on Trackpad reveals Windows 32- and 64-bit installers but no MacOSX installer!
Fortunately I eventually found the link in this forum. I'm no newbie; Apple made the MacOSX trackpad update impossible to find. Hopefully some Apple staffer will read this and fix the download search, or better yet, get the update pushed out the auto-update path.

Thinkstation P500: Disable AMT in BIOS?

The only configuration related to AMT feature locates in BIOS at Advanced-AMT Configuration.I wonder if there is any way to completely disable AMT since i need to create NIC teaming in Windows.

Hi,
> . Anyone know where in BIOS i can disable antivirus (in windovs alredy do)?
As i know, there is no option to disable antivirus in Bios.
> I want to use Recovery system function but after recovery report me that it is not complite
Read this article how to restore the factrory settings from hdd image:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58
If you want to restorefrom recovery disk you should set cd/dvdrom as the 1st boot device.

Missing bluetooth opt

missing bluetooth option on my laptops, how can I go about it.

PLease provide us more information like your model number, more info about issue, history, etc.
Meanwhile, Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

HP Pavilion Sleekbook 14 windows 7 wifi and bluetooth disabled

Hi,
I successfully downgraded Sleekbook 14 into Windows 7 64 a while ago.
Everything worked fine.
Now, after reinstalation of Windows 7 clear,
I cannot turn on Wifi and Bluetooth, and even cannot install drivers.
I tried several differnet wifi drivers.
I tried to use drivers which I used previously. No success.
I have Ralink module inside.
Drivers did not installed. In hardware list of Windows I do not see network card.
F12 LED still flash in orange. Fn+F12 nothing changes.
I cannot force it to blue light.
When I use Window Add Hardware... I see blank window. None hardware detect, and even I cannot select new harware manually. Is it normal?
Could it be module smashed? Does it happen? How to verify finally?
I do not see any network card or option in BIOS. Should I?

Hi there @JAN_GER
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are havingsome trouble with your Wireless after downgrading to Windows 7. I am happy to offer help with this.
Firstly, the model you referred to is not supported in a Windows 7, configuration. The HP customized drivers that are available are for Windows 8.0 and 8.1. With that in mind I would be happy to help you with any driver issue under a supported operating system.
Otherwise, you can take a look at the following page: What if I Don't See My Operating System?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

How to disable (not reset) bios password HP-Mini?

Is there a way to disable (not having to enter it after power on) the bios password? I KNOW the password, I can get into BIOS but I don't see an option to disable it, you can re-enter the current password and choose a new one but no delete or disabling option...??? Is there a way to disable it completly?

Got it! Was doing it wrong way leaving all spaces blank but it doesn't work because it always prompts you to enter your current password; so that's Current Password > "your current password" hit enterNew Password > "leave blank" hit enterConfirm New Password> "leave blank" hit enter and it prompts you to "CONTINUE with save changes?" > hit enter and Password changes from <SET> to <CLEAR>; SAVE & Exit and it's done. Thank you!

While creating Table it shows error as 'missing or invalid option

I had log on to ap/ap@vis in sqlplus and try to create table but showing error.....here below is the table
Create table Purchase_Order
(Item varchar2(10),
Item_Desc varchar2(100),
Item_Cost Number(7),
Item_Qty Number(7),
Item_Date Date,
Need_by_date date,
Last_updated_date date,
last_updated_by number(10),
creation_date date,
created_by number(10),
Attributed_category varchar2(100),
attribute1 varchar2(100),
attribute2 varchar2(100),
attribute3 varchar2(100),
attribute4 varchar2(100),
attribute5 varchar2(100),
attribute6 varchar2(100));
But it showing error as ORA-00922:missing or invalid option

It works for me
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> Create table Purchase_Order
2 (Item varchar2(10),
3 Item_Desc varchar2(100),
4 Item_Cost Number(7),
5 Item_Qty Number(7),
6 Item_Date Date,
7 Need_by_date date,
8 Last_updated_date date,
9 last_updated_by number(10),
10 creation_date date,
11 created_by number(10),
12 Attributed_category varchar2(100),
13 attribute1 varchar2(100),
14 attribute2 varchar2(100),
15 attribute3 varchar2(100),
16 attribute4 varchar2(100),
17 attribute5 varchar2(100),
18 attribute6 varchar2(100));
Table created.
SQL>

ORA - 00922 Missing or Invalid option error while creating table

I am tryin to create a table with the following syntax
1 CREATE TABLE TEST_FOR_SCRIPT (
2 TEST_A NUMBER NOT NULL
3 ,TEST_B VARCHAR2(30) DEFAULT 'UNDEFINED' NOT NULL
4 )
5* @storage_parms_table_cmn
6 /
@storage_parms_table_cmn
ERROR at line 5:
ORA-00922: missing or invalid option
Here, storage_parms_table_cmn.sql reads like this
tablespace DBK_CMN_DATA
Can anyone please guide me how to overcome this error.

What is your Oracle Version?
i can do it exactly what you did without error
sql> CREATE TABLE vd.TEST_FOR_SCRIPT (
2 TEST_A NUMBER NOT NULL
3 ,TEST_B VARCHAR2(30) DEFAULT 'UNDEFINED' NOT NULL
4 )
5 @test1.sql
6 /
Table created.
Cheers
http://fiedizheng.blogspot.com/

No option for hardware virtualization option in bios of DV6 1355dx / Windows 7

No option for hardware virtualization option in bios of DV6 1355dx / Windows 7. Tried installing some SPs such as sp53216 , sp55068, etc but the extration will warn Cann't check platform ID & had to close the window. Is there a sure shot patch to this issue?

EshaPrasad wrote:
No option for hardware virtualization option in bios of DV6 1355dx / Windows 7. Tried installing some SPs such as sp53216 , sp55068, etc but the extration will warn Cann't check platform ID & had to close the window. Is there a sure shot patch to this issue?
Hi,
Specs: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01893242&tmp_task=prodinfoCategory&cc=us&dlc=en...
CPU: 2.20 GHz Intel Core2 Duo Processor T6600
http://ark.intel.com/products/37255/Intel-Core2-Duo-Processor-T6600-2M-Cache-2_20-GHz-800-MHz-FSB
It says that the CPU doesn't support virtualization, means the option can't be in the BIOS.
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

How can I boot to USB device if no USB boot option in BIOS

I just purchased a Toshiba NB305-N410BL but am concerned as to how I would image the 250GB HDD if I can not boot from an external cdrom drive. I tried to backup to shared network folder but none show up on list. Only boot options in BIOS are HDD, FDD, and LAN. Thanks for all help in advance.

Hi, buddy-erp.
I don't know if my instructions apply to you because I only have the NB305 model. However, if you say you have followed all instructions, that is, 1) insured that no other USB devices are connected to your computer at bootup time and 2) have pressed F12 to enter the boot menu; 3) and then designated the USB flash drive as the source of the bootable restoration software you may need Toshiba technical support. I wonder if there is a BIOS update for your computer too. This may need to be downloaded and installed prior to beginning the restoration process. Nevertheless, as stated, I have a NB305 model and the instructions are clear. FYI (for your information), a virus infected my system and made certain changes to this process. Toshiba technical support informed me that the information displayed was wrong and the process outlined was unnecessary but did require technical support to restore it to the OEM default options.
Good luck.
Sincerely,
Bi-Ill
Good luck!
Sincerely,
Bill5960

Failed to create DNS with ODBC Datadirect Driver - error missing or invalid option

Dear All,
I tried to post a first time and get my post thrown away. So please just tell me if that's not the place to post such questions. I tried this forum because I didn't find any revelant information yet on internet.
I installed Informatica and Oracle 11g, tried to create my DSN with the Driver DataDirect Oracle Wire Protocol. I keep bumping into the message " [Informatica][ODBC Oracle wire protocol driver][Oracle] ora-00922: missing or invalid option".
Can you please help to understand where the error comes from?
Here are my current status :
* My table in the Oracle database is created with every field followed by NOT NULL option, the table is successfully created.
* The connection to the Oracle database using Oracle TNSNames Connection server name and TNSNames files seem to work, I tried to connect with another driver Oracle in OraDB 11g_home1. This one succeeds.
* Listener.ora:
# listener.ora Network Configuration File: C:\app\ql186003\product\11.2.0\dbhome_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\app\ql186003\product\11.2.0\dbhome_1)
      (PROGRAM = extproc)
      (ENVS = "EXTPROC_DLLS=ONLY:C:\app\ql186003\product\11.2.0\dbhome_1\bin\oraclr11.dll")
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
ADR_BASE_LISTENER = C:\app\ql186003
* Running lsnrctl STATUS:
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date                22-FEB-2014 21:43:22
Uptime                    0 days 1 hr. 8 min. 33 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\ql186003\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         c:\app\ql186003\diag\tnslsnr\WBEQL186003-Q4G\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "TESTDBXDB" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
Service "TEST_DB" has 1 instance(s).
Instance "testdb", status READY, has 1 handler(s) for this service...
Service "orcl.TD.TERADATA.COM" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.TD.TERADATA.COM" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Thank you very much for any guidance.
Qiong

Hi,
Try this :
While creating TYPE remove semi colon from end of the statement and also dont use extra / as / means execute last statement so you may encounter error..
CREATE TYPE ind_tab_supplier1 IS VARRAY(6) OF VARCHAR2(30)
/

Missing bluetooth disable option in BIOS

Similar Messages

Maybe you are looking for